Categories

Best Engine Crankshaft Pulley

BETOOLL 19 mm Harmonic Balancer Socket & 50mm Crankshaft Crank Pulley Wrench Holder Tool Removal Holding Spanner kit Compatible with Honda and Acura Engines

  • 50mm Crankshaft Pulley Removal Tool: Used to maintain the harmonic damper pulley position and prevent it from rotaing as you install or remove many Acura and Honda engine crank bolts..
  • Using of 50mm Tool: Works with a 1/2 inch breaker bar or ratchet. Small compact and center hollow design, the crankshaft pulley wrench gets into tight engine spaces easily when servicing the engine and powertrain..
  • 19mm Harmonic Balancer Socket: BETOOLL socket could be used on Honda engines that use a 19mm hex pulley damper bolt or other 19mm applications..
  • Using of 19mm Tool: Used with 1/2” square drive. This Harmonic Balancer Socket features a deep counter-weighted design to increase torque, so you could quickly and easily break stubborn bolts loose..
  • Tough and Sturdy: Made of high strength alloy steel,heavy duty and durable.Coated with black paint which prevention corrosion. Backed by a lifetime replacement guarantee..
Check Stock

Camshaft Pulley Holder Crankshaft Harmonic Damper Pulley Holding Removal Tool Compatible with Toyota Lexus

  • 1X crankshaft damper pulley holding tool.
  • Camshaft Pulley Holder Tool: Used it to held the pulleys when remove camshaft pulleys, have two grooved pins to hold camshaft sprockets stationary to remove the bolts, requivalent OEM W89208, compatible with Toyota, Nissan, Camry, Mazda, OHC and many others, the distance between of two grooved pins is 2.36 inches, so please carelly check the size bedfore order.
  • Crankshaft Damper Pulley Holder Tool: Prevent the harmonic damper pulley from rotating in the process of removing and setting the final torque specification on the pulley bolt, allowing users to easily remove and install the crank bolt on engines. only Compatible with Lexus from 1990: 3.0 L6, 3.0 V6, 3.3 V6, 4.0 V8, 4.3 V8, 4.7 V8.
  • Compatible with Toyota from 1996 : 3.0 V6, 3.3 V6, 4.0 V6, 4.7 V8. fit 4 cyl engine : 1983-1995 22RE, 1995-2004 2RZ,1995-2004 3RZ.
  • Worked Well: The camshaft pulley holder tool have enougt depth to lock the camshaft sprocket, make it fixed, and with rubber handle, not hurt your hands, make replace cam shaft gears and seals more easy.
Check Stock

EWK 50mm Crankshaft Pulley Wrench Holder Tool Crank Removal Holding Spanner kit for Honda and Acura Engines

  • 【 Specialty Tool 】 EWK professional grade Acura and Honda crank pulley tool.
  • holds the harmonic damper pulley in place and keep it from rotating....
  • 【 Wide Applications 】 Works with a 1/2 inch breaker bar or ratchet, this crankshaft pulley holder fits the hex shape of harmonic balancer on many....
  • 【 Great Compatibility 】 Small compact and center hollow design, the crankshaft pulley wrench gets into tight engine spaces easily when servicing....
  • 【 Tough and Sturdy 】 Highly recommended by professional mechanics! Constructed with hardened Chrome-Molybdenum steel alloy, extremely durable and....
  • 【 EWK Assurance】Excellent WorKing experience guaranteed! EWK provides you premium quality tools and the best service with 12 months warranty. If....
Check Stock

VMS RACING 94-97 Light Weight Billet Aluminum Crankshaft CRANK PULLEY Compatible with Mazda Miata MX5 1994-1997 1.8L BP-ZE Engines ONLY OEM SIZE (uses same belts)

  • APPLICATION ENGINE -- 3.0Lt AJ-126/306PS, 5.0Lt AJ133/508PS, 508PN. Replace OEM 303-1437.
  • FOR VEHICLE MODEL -- For Jaguar vehicle applications include: F-Type, XE, XF, XFR, XJ, XJR, XK8, XKR 2009 - 2018, For Land Rover vehicle applications include: Discovery 4/Discovery, For Range Rover, Range Rover Sport 2009 - 2018..
  • FUNCTION -- Set of tools required for the removal and installation of the front crankshaft pulley(Crankshaft Vibration Damper) for Jaguar and Land Rover 3.0lt v6 and 5.0lt V8 petrol engines. A must have for removing and installing for land rover jag crank pulley..
  • BENEFITS -- The crankshaft pulleys used on these engines are tightened to 200 Nm + 270 degrees, so are very tight to undo. This kit helps hold the pulleys tight. Also included in the kit are the puller component’s required to remove the pulley without damage..
  • SATISFACTION GUARANTEE -- If you are not satisfied with Camoo products, simply return it for a full refund in 30 days. Guarantee with 12 months warranty. No worry about buying!.
Check Stock

A-Team Performance - Harmonic Balancer Install Tool Crank Pulley Installer Crankshaft Installation 551141 Billet - Compatible with GM 1997-Up LS1 LS Engines

  • Harmonic Balancer Install Tool Crank Pulley Installer Crankshaft Installation 551141 Billet.
  • Compatible with GM 1997-Up LS1 LS Engines.
  • Superior Quality: Made of hardened structural 10.9 steel, it is excellent solid and durable with great rust and corrosion resistance to long-lasting service your balancer..
  • Wide Compatibility: This LS Harmonic balancer is perfect for your Camaro, Corvette, Trans Am, GTO, G8, LS Truck, or LS powered street rod..
  • Installation: Simply thread the tool into the crankshaft until it seats, then tighten the nut down until the pulley is seated. This is a must have for engine swaps or upgrading the balancer..
Check Stock

Microheli CNC Aluminum Tail Drive Pulley - Blade 300X

  • FEATURES: Two-piece aluminum construction.
  • one 6x15mm socket head screw and one 6.3mm inner diameter Washer.
  • REQUIRES: Installing on engine crankshaft.
Check Stock

Crank Shaft Sleeve Adapter， 7/8" to 1" inch Gas Engine Pulley Crank Shaft Sleeve Adapter with Step Key Steel Silver 7/8 to 1 inch shaft adapter with clutch 7/8 centrifugal clutch crankshaft sleeve 7/8

  • ...cessed and rolled, which has greater strength, toughness and durability, strong wear resistance, not easy to rust and deform, reliable quality, and can be used stably for a long time. for 7/8 to 1 shaft adapter 7/8 to 1 inch shaft adapter with clutch.
  • STRONG COMPATIBILITY: Crankshaft sleeve adapters are equipped with different sizes of adapters, which have a wide range of applications and can meet your various needs. Please confirm whether the product is Replacement before placing an order. for 7/7" to 25mm shaft adapter 7/8 centrifugal clutch.
  • PROFESSIONAL USE: The crankshaft sleeve adapter allows you to use the old clutch or pulley on the new engine, you may need to use a small hammer to gently tap it into place to make it Replacement tightly for 7/8 blade pulley crankshaft sleeve 7/8 to 1 in.
  • EASY TO INSTALL: Contains an adapter and keyway, the wider part of the key is located in the adapter. The installation is very simple and can be completed in a few minutes. It is your ideal accessory. for 7/8 to 1 inch shaft adapter 7/8 to 1 crankshaft adapter.
Check Stock

Assault Racing Products A9724 Big Block Chevy Chrome Triple Groove Long Crankshaft Pulley BBC 396 427 454

  • The pulley have deep grooves to prevent belt slippage and are good for replacing your old pulley..
  • They are made of metal materials to provide good performance and reliability. The Crankshaft Pulley is durable and have high wear resistance..
  • Groove Quantity: 2, Center Hole Diameter: 28mm / 1.1'', Size: 7.1x16.7cm / 2.8"x6.57"(H*D).
  • This crankshaft pulley fits for Chevy SBC Engines when using a long water pump. Please confirm your car model of the part before purchasing to avoid buying the wrong..
Check Stock

VMS RACING 99-05 Light Weight Billet Aluminum Crankshaft CRANK PULLEY Compatible with Mazda Miata MX5 1999-2005 1.8L BP-4W Engines ONLY OEM SIZE (uses same belts)

  • Function: This crank pulley tool is used to maintain the harmonic damper pulley position while removing/installing the pulley bolt.
  • Feature: Used with a 1/2inch breaker bar or ratchet, this crank pulley removal tool prevents the harmonic damper pulley from rotating while you're removing and setting the final torque specification on the pulley bolt..
  • Design: This 50 mm crank pulley tool socket designed with a hexagonal shape with a hole in the center of the tool that allows the use of a socket and extension to help loosen or tighten the pulley bolt..
  • Compatibility: This crankshaft pulley wrench holder tool compatible for Honda (most) and Acura engines..
  • Material: Made of hardened chrome molybdenum steel with great durability to long-lasting service your engine..
Check Stock

Darton 300-018 Dry Cylinder Sleeve Kit for H22 & H23

  • [Shaft Sleeve Adapter Kit] This stainless steel shaft sleeve adapts a crankshaft from 3/4” to 1” diameter. It comes with 1.77"" step key..
  • [ ] Made from stainless steel, precision machined and tumbled, high durability. It is durable in use, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage..
  • [Applications] Alters motors with a different diameter shaft. Alters pulleys for a different speed or belt. Reduces the necessity of buying a new motor or pulley to maintain existing components and speed/power requirements. Adapts larger wheel bores to smaller axles. Works with Gas Engine Crank Shafts to enlarge the crank diameter to fit pulleys, gear boxes etc..
  • Perfect Performance] Allows you to use your old clutch or pulley on a new engine, you may need to use a small hammer to gently tap it in to place for tightly fit..
  • [Package Include] 1 Set Shaft Sleeve Adapter Kit.
Check Stock

19 mm Harmonic Balancer Socket & 50mm Crankshaft Crank Pulley Wrench Holder for Honda and Acura Engines

  • 【50MM Crankshaft Pulley Removal Tool 】-- Used to maintain the harmonic damper pulley position while removing/installing the pulley bolt on many....
  • Using 50MM Crankshaft Pulley Removal Tool -- Use with square socket driver. >1/2" square drive use with breaker bar. Hole in center of tool - allows....
  • 【19 MM Harmonic Balancer Socket 】--The hex socket is used with an impact wrench to loosen the crankshaft bolt It can be used on Honda engines that....
  • Using 19MM Harmonic Balancer Socket -- Use with 1/2" drive.Designed with more than three times the standard socket mass to direct more energy to....
  • Satisfaction Guarantee: If you're not 100% satisfied with this tool set, simply return it for a full refund in 30 days, guarantee with 12 months’....
Check Stock

AJP Distributors JDM Upgrade Light Weight Aluminum Under Drive Crank Shaft Crankshaft Alternator Pulley Wheel Kit Red Compatible/Replacement For Impreza Wrx 2.0L 2.5L EJ20 EJ25 Turbo Engine

  • The pulley have deep grooves to prevent belt slippage and are good for replacing your old pulley..
  • They are made of metal materials to provide good performance and reliability. The Crankshaft Pulley is durable and have high wear resistance..
  • Groove Quantity: 3, Center Hole Diameter: 28mm / 1.1'', Size: 7.1x16.7cm / 2.8"x6.57"(H*D).
  • This crankshaft pulley fits for Chevy SBC Engines when using a long water pump. Please confirm your car model of the part before purchasing to avoid buying the wrong..
Check Stock

SPI Fix Kit 2010-2012 fits Polaris 800 Sleds 85mm Pistons Bearings & Fix Kit

  • [Shaft Sleeve Adapter Kit] This stainless steel shaft sleeve adapts a crankshaft from 1"-3/4"x1/4"-3/16" inch diameter. It comes with 2.01" step key..
  • [ ] Made from stainless steel, precision machined and tumbled, high durability. It is durable in use, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage..
  • [Applications] Alters motors with a different diameter shaft. Alters pulleys for a different speed or belt. Reduces the necessity of buying a new motor or pulley to maintain existing components and speed/power requirements. Adapts larger wheel bores to smaller axles. Works with Gas Engine Crank Shafts to enlarge the crank diameter to fit pulleys, gear boxes etc..
  • Perfect Performance] Allows you to use your old clutch or pulley on a new engine, you may need to use a small hammer to gently tap it in to place for tightly fit..
  • [Package Include] 1 Set Shaft Sleeve Adapter Kit.
Check Stock