Best Engine Knock Sensor

Ignition Knock Detonation Sensor Compatible with Cadillac Escalade Chevy Silverado Express Suburban Tahoe Trailblazer GMC Sierra Savana Yukon and More Replacement for 10456603 12589867 213-3521

  • Complete Solution - An ignition knock detonation sensor monitors the engine for pinging or spark knock, and this is a recommended replacement for your....
  • Quality assured - This knock sensor is constructed from high-quality materials, mounting threads match OE for exact fit, it has undergone strict....
  • Ensure Fit - Works on many GM models, such as Buick Rainier Cadillac CTS Escalade, Isuzu Ascender, Pontiac Firebird, GTO, Chevy Avalanche 1500 Camaro....
  • Replaces Part # - 10456018, 10456288, 1997699, 8104562880,10456603, 12589867, 8104566030,8125898670,213362, 2133521, It is a direct replacement....
  • 12-Month Warranty - If the ignition knock sensors fails, stops working or any other problems, Please not hesitate to contact us for free replacement....
Check Stock

Michigan Motorsports Knock Sensor Adapter for 1997-2004 LS1 LS6 Car to LS2 LS3 Knock Sensor

  • Knock Sensor Adapter for 1997-2004 LS1 Car to LS2 Knock Sensor.
  • This harness allows the dual-wire LS2 knock sensors located on side of the LS2 engine block to be plugged into the factory LS1 PCM harness. It has the perfect added length and thermal protection required to be routed near hot exhaust manifolds. Compatible with the PCM harness in LS1 Corvette and F-Body cars..
  • PLEASE NOTE THAT IN ORDER TO USE LS2 KNOCK SENSORS IN A LS1 CAR YOU REQUIRE SPECIAL LS1 PCM SOFTWARE CHANGES OR A LS2 PCM..
  • KEY FEATURES: Fully Plug and Play with the factory harness & sensors Military spec. high-temperature Teflon wire (same type used on oxygen sensors) 24" Length High-temperature (1200F) heat treated protective loom All connections crimped using our computerized crimp-quality monitoring system and then circuit checked for the utmost in reliability..
Check Stock

ICT Billet LS Gen III Knock Sensor Relocation Brackets Billet Aluminum Compatible with GM LS Gen 3 Engines LS1 LM7 LR4 LQ4 LS6 L59 LQ9 LM4 551216-KN30

  • Relocates LS1 Gen III knock sensors from valley pan to side skirt of the engine block.
  • Made in Wichita, Kansas from aerospace grade, USA produced, billet aluminum.
  • Compatible with all LS gen III harnesses and gen III knock sensors.
  • Fits engine RPO codes: LS1 LM7 LR4 LQ4 LS6 L59 LQ9 LM4 L33.
  • Includes 2 billet aluminum knock sensor brackets and mounting hardware.
Check Stock

Mercury Marine Quickleen Engine and Fuel System Cleaner, 12 Ounces 92-8M0047931

  • Removes deposits from port fuel injectors to keep injectors functioning properly, ensuring unrestricted fuel flow.
  • Cleans intake valve deposits to help eliminate starting issues and ensure maximum drivability.
  • Cleans combustion chambers to assist in eliminating engine knocking, pinging, and run-on in older vehicles, and loss of power and acceleration in knock-sensor equipped vehicles.
  • Coats all metallic surfaces, protecting the entire fuel system.
Check Stock

for Infiniti for Nissan 22060-30P00/24079-31U01 Car Knock Sensor & Wiring Harness

  • Great aftermarket knock sensor/wiring harness for Infiniti for Nissan.
  • Easy to install, perfect match to your original car.
  • Knock sensor is a direct replacement for the old one.
  • Excellent material --- The knock sensor is made of high-quality Plastic material, which is sturdy and durable, which maximizes the durability and....
  • Professional manufacturing, high accuracy and durable.
Check Stock

Qiilu Knock Sensor Wiring Harness Kit for Infiniti G20 I30 J30 Q45 QX4 Nissan Altima D21 Pickup Frontier Maxima Pathfinder 22060-30P00 24079-31U01

  • 【Preferred Material】Car Knock Sensor Wiring Harness is made of high-quality plastic, it is more wear-resistant, corrosion-resistant, durable and....
  • 【Professional Tool】Car Knock Sensor Wiring Harness used professional manufacturing, high accuracy and durable..
  • 【Applicable models】Car Knock Sensor Wiring Harness is suitable for Infiniti Nissan. OEM number:22060-30P00 & 24079-31U01..
  • 【Easy to Install】 The prominent advantage of our Car Knock Sensor Wiring Harness is easy and simple installation to reduce the trouble of cutting....
  • Buy with confidence! We offer the 365-Day warranty and lifetime support. If you have any question on use, kindly contact us at any time directly, we....
Check Stock

Houkiper Car Timing Light Automotive, Engine Timing Strobe Light Gun, Inductive Xenon Ignition Timing Light Tool for Car Vehicle Motorcycle, Marine

  • ★ 【Safe Professional Engine Timing Light】★Made of impact resistant ABS housing, reverse polarity protected and over load protection, accurate up to 10000rpm..
  • ★ 【Widely Use】★Design to re-timing your car`s ignition to get the best performance that you can. This strobe timing light is suitable for car, agricultural, marine engines and all gasoline engines of two strokes or four strokes, easily operate on 12V ignition systems..
  • ★ 【Powerful Function】★The inductive timing light is able to detect the automotive knock suppression control system and vacuum advance angle control system, change its advance angle with the speed change.
  • ★ 【Decreasing Cylinder Pressure】★The ignition timing light is able to reset the ignition timing under the normal wear of the engine for a long time, the regular replacement of timing belt and belt pulley, the decrease of cylinder pressure..
  • ★ 【Sensor Clips】★The sensor clip is red and black to distinguish positive and negative poles, easy to use and more secure. And the color of the wire is also different to prevent the glue sleeve of the clip to come off and difficult to distinguish.
Check Stock

Mean Mug Auto 111415-19238A Knock Sensor Wire Harness - Compatible with Toyota Lexus - Replaces OEM # 82219-07010

  • Built for the efficiency to allow the knock sensors to send data to the vehicle's computer..
  • Ready to fit snuggly onto your knock sensors to complete the electrical connection..
  • Ruggedly built to last years with your vehicle. Just replace your old knock sensor wire harness and never think about it again..
  • Interchangeable with the OEM part numbers listed below to affordably fix your vehicle..
  • Here's what you'll receive: 1x knock sensor wire harness, with warranty..
Check Stock

HiSport Knock Sensor Replacement for Buick Cadiac Chevroet GMC Hunmmer Isuzu Pontiac with OE Number 10456603 12589867 L0456603 213-3521

  • 【Knock Sensor】:Excellent quality can keep protecting your vehicle motor.Providing critical information to the vehicle's ECU.Adjust the accurately....
  • 【Scope of use】:The product is compatible with Buick Cadiac Chevroet GMC Hunmmer Isuzu Pontiac.Pls check your vehicle subol model year information....
  • 【Organial Quality】:OE number 10456603 12589867 L0456603 213-3521.The item is same as the orginal manufactory which is durable and reliable.Benfits....
  • 【EASY INSTALLATION】:The knock sensor is easy to install, if you don't have a similar experience, we highly recommended professional installation!.
Check Stock

Timing Light 12V Ignition Timing Light Automotive Strong Flash Timing Lights with Sliding Sensor Clip,Long Test Lead, Reverse Polarity Protection, Overload Protection for Car, Motorcycle Petrol Engine

  • 【Powerful Ignition Timing Light】The timing light can intuitively detect the ignition timing scale on the engine flywheel or pulley to make appropriate adjustments.It can detect the automotive knock suppression control system and vacuum advance angle control system, and change the advance angle as the speed changes.Timing light is suitable for automobiles, motorcycles, ATVs, RVs, boats and all two-stroke or four-stroke gasoline engines.It works on 12V ignition systems. Its speed is up to 1000rpm..
  • 【Why You Need Timing Lights】Under the long-term normal wear and tear of the engine, the timing belt and pulley are regularly replaced, and the cylinder pressure drops, so the ignition timing needs to be readjusted to improve engine performance and efficiency. Timing light automotive can be used to record timing changes due to ignition system failure or resetting timing when vehicle components are changed..
  • 【Strong Flash Timing Light with Sliding Sensor Clip&Long Test Lead】The special bulb used in timing light produces a very strong flash so that the timing marks on the engine can be viewed in bright light or even in sunlight, which is very convenient for you to adjust the ignition timing. The spark plug sensor clip is a sliding clip design for....
Check Stock

Hisport Knock Sensor Engine Detonation Replacment for Nissan 1999-2004 3.3L XE SVE 1999-2002 Mercury 3.3L Villager OE Number SU4769 KS107 220607B000 1x Pcs

  • 【Knock Sensor】:Excellent quality can keep protecting your vehicle motor.Providing critical information to the vehicle's ECU.Adjust the....
  • 【Scope of use】:The product is replacement for 1999-2004 3.3L XE SVE 1999-2002 Mercury 3.3L Villager.Pls check your vehicle subol model year....
  • 【OE Number】:SU4769, KS107, 220607B000.The item is same as the orginal manufactory which is durable and reliable.Benfits for your wallet and car..
  • 【EASY INSTALLATION】: The knock sensor is easy to install, if you don't have a similar experience, we highly recommended professional installation!.
  • 【Package Included】:1x knock sensor.
Check Stock

APDTY 112801 Replacement Knock Sensor Wiring Harness Connector 24079-31U01

  • Brand New Replacement Knock Sensor Wiring Harness.
  • Allows Replacement Of a Damaged Knock Sensor Wiring Harness.
  • See Compatibility Chart To Verify Your Specific Vehicle Year, Make, & Model.
Check Stock

FASWORX Manifold and Block Drain Plug Kit Compatible with Mercruiser, OMC, Volvo Penta and Many Others.

  • TWO quick engine block drain plugs. Simply loosen and tighten by hand..
  • Fits any GM (Chevy) engine without knock sensors. All fuel injected engines have knock sensors in the drain holes..
  • Fits Mercruiser, OMC, and Volvo Penta GM based engines..
Check Stock