Categories

Best Engine Mount Bolt Torque Specs

Autobahn88 Engine Torque Damper Kit, compatible with Nissan Skyline GTR R33 R34 RB26DETT BCNR33 BNR34

  • Fitment compatible with Nissan Skyline GTR R33 R34 RB26DETT BCNR33 BNR34.
  • The Engine Damper mounts in between your vehicle's engine block and firewall to effectively control horsepower and torque. Keep your motor supported as you slam through those gears while adding a nice showpiece under the hood. Creates less stress to engine mounts, giving you more power to the wheel.
  • Reduce Engine damping and bumping. Increase Lifespan of your Engine Mount.
  • Made by aluminum. Includes all thick and strong mounting kit.
  • Direct Bolt On. No modification is required that can DIY in 30 mins.
Check Stock

Mutazu Chrome Frame Covers ABS Plastic for Suzuki Hayabusa GSXR 1300 (SC-10)

  • The Precision lower front engine cover is sculpted and defined for a clean appearance.
  • The cover conceals the lower portion of the frame, kickstand assemply, front engine stabilizer, floorboard mount, and the wiring leading to the voltage regulator.
  • Includes (1) lower frame cover and (1) 3/8-16 x 2.25" socket head cap screw.
  • Suggested for installation (not included): set of hex wrenches, set of hex bit sockets, and (1) torque wrench.
  • Compatible with Harley-Davidson: '17-'19 Electra Glides, Road Kings, Road Glides & Street Glides.
Check Stock

BILT HARD 301cc 10HP Gas Powered Engine, Horizontal 4 Stroke OHV Gas Motor, Shaft 1" Diameter, 3.48" Length, 1/4" Keyway, Replacement for Go Cart, Compressor, Log Splitter, Pressure Washer

  • OUR MOST POPULAR 7HP GAS POWERED ENGINE- 7HP OHV 4-Stroke Recoil Starting Gas Engine is designed for all DIY or Professional applications. Capable of delivering Powerful Torque & high RPM Speeds. Built to meet & exceed industrial grade quality standards & provide dependable performance. Manufactured to OSHA/ISO Regulations, EPA3 LCRPS.2121GC-010) / CARB(U-U-169-0418) Certified & Approved, making this a solid choice for the everyday Hard Working American!.
  • GEARHEAD SPECS - Our 7HP 209cc Horizontal Cylinder 4 Stroke OHV Recoil Starting Gas Engine has a Max Output Power/Speed of: 4.3kW/3600RPMs & 8.85Ft-Lbs/12.4Nm of Torque @2500RPMs. Counterclockwise Rotating PTO Ball Bearing Support Shaft Dia. of: 3/4" x 2.43”, 3/16" Straight Keyway & 5/16”-24 UNF End Tapered. Compression Ratio of: 8.2:1, Bore x Stroke of: 74.5mm x 48mm. Valve Clearance (Cold) Intake: 0.05-0.10mm & Exhaust: 0.05-0.10mm. Universal 4 Bolt Mounting Pattern: 6.38"/162m x 3.17"/80.5mm..
  • SUPERIOR PRODUCT INTEGRITY - The engine is designed to ensure the operator's safety.
  • Always operate the machine according to directions in the user manual, always wear th....
Check Stock

AlphaWorks Gas Engine 7HP Motor Horizontal 4 Stroke OHV Recoil Start 3600RPM 8.85Ft-Lbs/12Nm Torque 3/4\ x2.43” Shaft 3/16\ Keyway 5/16”-24 UNF End Tapped Go Kart Log Splitter EPA/CARB Certified

  • OUR MOST POPULAR 7HP GAS POWERED ENGINE- 7HP OHV 4-Stroke Recoil Starting Gas Engine is designed for all DIY or Professional applications. Capable of delivering Powerful Torque & high RPM Speeds. Built to meet & exceed industrial grade quality standards & provide dependable performance. Manufactured to OSHA/ISO Regulations, EPA3 LCRPS.2121GC-010) / CARB(U-U-169-0418) Certified & Approved, making this a solid choice for the everyday Hard Working American!.
  • GEARHEAD SPECS - Our 7HP 209cc Horizontal Cylinder 4 Stroke OHV Recoil Starting Gas Engine has a Max Output Power/Speed of: 4.3kW/3600RPMs & 8.85Ft-Lbs/12.4Nm of Torque @2500RPMs. Counterclockwise Rotating PTO Ball Bearing Support Shaft Dia. of: 3/4" x 2.43”, 3/16" Straight Keyway & 5/16”-24 UNF End Tapered. Compression Ratio of: 8.2:1, Bore x Stroke of: 74.5mm x 48mm. Valve Clearance (Cold) Intake: 0.05-0.10mm & Exhaust: 0.05-0.10mm. Universal 4 Bolt Mounting Pattern: 6.38"/162m x 3.17"/80.5mm..
  • SUPERIOR PRODUCT INTEGRITY - The engine is designed to ensure the operator's safety.
  • Always operate the machine according to directions in the user manual, always wear the appropriate ANSI standard hand and eye protection (ENGINE OIL NOT INCLUDED, MUST ADD UPON UN-BOXING).
Check Stock

Brian Tooley Racing BTR Truck Norris Camshaft Install Kit for Chevrolet GM Gen III/IV LS 4.8 5.3 6.0 Vortec Trucks (4.8L / 5.3L Engines)

  • BTR GEN III & IV LS Truck Norris Cam Install Kit for 1999-2013 4.8 5.3 6.0 6.2 Engines.
  • The Truck Norris will deliver a roundhouse kick in the pants to your 1999-2013 Silverado or Sierra. Developed from hundreds of hours of in house cam lobe design and dyno testing, this camshaft has more power and torque everywhere in the curve compared to our legendary V2 truck cams..
  • VVT engines will require a VVT delete kit. If installing in an engine originally equipped with a 1-bolt camshaft, a 3 bolt conversion kit will be required..
  • Our kit takes the guesswork out and includes the following: Truck Norris Camshaft, Beehive Springs with Valve Stem Seals, Delphi Lifters with Guides, MLS head gaskets, Front Cover Gasket with Front Seal and water pump gaskets, and GM crank bolt.
Check Stock

The ROP Shop | 2400 PSI Power Pressure Washer Water Pump for Excell & Devilbiss VR2400, VR2500

  • Includes - (1) Vertical Pressure Washer Pump with Chemical Injector, Unloader Valve, Thermal Release Valve & Outlet Tube (come installed).
  • This pump is for vertical gas engine driven units. In some instances, the pump may need to be removed to change engine oil. The mounting flange provides a convenient connection to most 7/8” diameter shaft vertical gas engines in 4.5-7 HP. The pump has a hole in the leg for draining the engine oil. The pump includes a built-in pressure control valve, downstream chemical injection system and thermal relief valve.
  • This has the outlet facing the front. Some specific pressure washers may require longer bolts and spacers to mount the pump to your engine. These bolts and spacers are NOT included, but may be purchased at your local hardware store. Common bolt sizes: Two - 5/16" 18 x 2 1/2", One - 5/16" 18 x 3 1/2".
Check Stock

LOSTAR 4 x Solid Motor Engine Mount Combo SBC Chevy Frame Mount Rat Rod Hot Street Stock

  • ✅Feature: -This is a Set of Bolt-On Steel Motor Mounts and Chassis Mounts. -This set is designed for Small Block and Big Block Chevy Applications. -Small Block Chevy Engine Mounts replace the upper stock rubber mounts and prevent twist during hard accelerations. -Big Block Chevy frame mount side are directional just like the OEM clamshell type. -All the holes lined up and engine mount bolts went in easily. -These also work great in custom chassis builds..
  • ✅Compatibility: 1974-1981 Camaro & Firebird with 307 & 350, 1973-1988 Chevelle with 307& 350 & 402 & 454, 1973-1979 Nova with 307 & 350, 1976-1990 Impala & Caprice with 307 & 350.
  • ✅Size: -Small Block Chevy Solid Engine Mounts: -Inside to Inside width: 2.5" -Bottom to Center bolt hole: 2" -Frame Motor Mounts: -Overall Length: 6-1/8" -Overall Width: 2-3/8" -Center to center bolt hole length: 5-1/8" -Center to center bolt hole width one: 2-3/8" -Center to center bolt hole width two: 1-3/4".
  • ✅Package Includes: 4 x Motor Mount and Frame Mount Kit.
  • ✅1 Year Unlimited-mileage Quality Guarantee.
Check Stock

14T Centrifugal Clutch and #420 Chain For Harbor Freight Predator 8HP 301cc Go Kart

  • 4 Stroke Engine, Semi Automatic (3 forward 1 reverse gear), electric start, single cylinder.
  • Front sprocket: 420 - 17mm - 14T, Ignition Method: CDI.
  • Top Engine Mount: 3.62'', Bottom Engine Mount: 3.23'', Bolt to Bolt: 5.98.
Check Stock

Motorized Bicycle Offset Wide Frame Chopper Mount Kit

  • SOLUTION FOR CHOPPER BIKES: The Speed Demon Off Set Chopper mount is the solution to those difficult chopper bike builds. Making engine mount fabrication a thing of the past, this bracket will sit in your frame and provide a mount for your two stroke engine. No welding required, it's all bolt on!.
  • HEAVY DUTY: Constructed of laser cut high grade steel, the bracket is designed to bolt directly to your frame and secure your engine. It's compact design takes very little space in your frame so that you have extra space for any accessory you want to instill along side your engine kit..
  • EASY INSTALLATION: Installation is a breeze, just use the supplied u-bolts and clamp your bracket to your chopper bike and install your engine directly to the bracket. It's that simple!.
  • UNIVERSAL FIT: This chopper mount kit is designed to work with most standard 48cc, 60cc, 66cc and 80cc 2-stroke engines as well as most chopper style bikes such as the OCC Schwinn Bikes, Micargi Jaos, Micargi Prado Deluxe, Micargi Mustang GTS, and many other chopper frame style bikes!.
  • PACKAGE INCLUDERS: 1x Speed Demon Engine Bracket, 2x U-Bracket Mounts, 1x V-Bracket Mounts, 2x Vibration Dampening Hoses, 1x Bag of Nuts and Washer.
Check Stock

Frigidaire FF13DISPC1 1.25 HP Corded Garbage Disposer for Kitchen Sinks

  • Safer Disposal with Silver Guard: Powerful Silver Guard magnetic ring captures most metal objects before they enter into the disposer chamber..
  • Torque Master Powerful Grinding System: Instant, high speed-torque powers through tough scraps and food waste. Your disposer’s system works to....
  • Quietest, High Powered Performance: Designed for maximum sound reduction with fully insulated sound shell..
  • Easy to Install Design: Quickly install your disposer to the existing 3-bolt sink mount flange or use the provided 3-bolt mount flange. Compatible....
Check Stock

The ROP Shop Spare Tire Wheel Mount Kit Heavy Duty Bracket/Carrier for 6 & 8 Lugs 27021

  • Spare Tire Wheel Mount Kit, Heavy Duty Bracket / Carrier for 6 & 8 Lugs, 27021.
  • Specs - Short Nut & Bolt Specs: Length - 1.25", Diameter - 0.5", Thread Type - Course, Long Nut & Bolt Specs: Length - 4", Diameter - 0.30", Thread....
  • Includes - Brackets, (2) Short Bolts, (4) Long Bolts, (2) Nuts for Short Bolts, (4) Nuts for Long Bolts, (4) Washers for Long Bolts.
Check Stock

ENA Front Engine Torque Strut Mount Compatible with Toyota Camry 2.4L Replacement for A4204

  • Engine Torque Strut Mounts undergo extensive lab and vehicle fitment testing. Highest quality materials are utilized along with stringent quality control standards to meet or exceed OE specifications.
  • The rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle's application requirements.
  • All parts are tested throughout the manufacturing process to ensure proper management of engine torque and dampening of excess noise and vibration.
  • Worn or broken engine mounts place added strain upon the transmission mount, which can lead to misalignment of the driveshaft which can cause the transmission mount and/or the universal joints to prematurely fail.
  • 1 Year Limited Warranty - Please use Amazon's Your Garage feature above to see if this part is compatible with your vehicle.
Check Stock

ENA Torque Strut Mount Compatible with Toyota Camry V6 3.0L Auto Trans Replacement for A4236

  • Engine Torque Strut Mounts undergo extensive lab and vehicle fitment testing. Highest quality materials are utilized along with stringent quality control standards to meet or exceed OE specifications.
  • The rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle's application requirements.
  • All parts are tested throughout the manufacturing process to ensure proper management of engine torque and dampening of excess noise and vibration.
  • Worn or broken engine mounts place added strain upon the transmission mount, which can lead to misalignment of the driveshaft which can cause the transmission mount and/or the universal joints to prematurely fail.
  • 1 Year Limited Warranty - Please use Amazon's Your Garage feature above to see if this part is compatible with your vehicle.
Check Stock