Categories

Best Engine Mount Screw

Seeutek 80cc Bicycle Engine Kit 26" 28" Bike Bicycle Motorized 2 Stroke Cycle Petrol Gas Motor Engine Kit Upgrade with Speedoemter

  • 80cc bicycle engine kit with speedometer.This bike engine kit fits most mens' 24" and larger bicycles which includes mountain,cruiser,chopper and road bikes with a V-frame, at least a 8.5" height clearance for the engine. Large bikes (larger frames/down tubes) may require the universal mount. Notes: Be assured the mixing ratio for gas and oil:16:1 for break period (first 300 miles)/20:1 after to avoid motor lock up or piston seized. Please read attached instruction manual before installation..
  • 80cc bike motor kit, Mode of engine: single cylinder, air-cooling, 2-stroke.
  • chain length:110 links, 55 inches. Driving ratio:18: 01.
  • lubrication oil: motorcycle synthetic 2 stroke oil. Notes: Fuel Type:Gas 93# and please use premium quality oils to prolong engine life. And add some lubricant into the air cylinder before starting..
  • Horse power: 2.75 HP. Ignition type: CDI. Engine Type: Single cylinder, air-cooling, 2-stroke.
  • Chain Length: 110 links. Larger frame size requires drilling into bike frame and use of the universal face plate.Notes:If new carb ....
Check Stock

NKTECH NK-HS2 Inductive Hour Meter for Gas Engine Lawn Mover Marine ATV Motorcycle Boat Snowmobile Dirt Bike Outboard Motor Generator Waterproof Hourmeter (Black)

  • TACHOMETER---- Messuring and records your engine RPMs (0-25000RPM).
  • WORKING SIGNAL DETECTION---- One pick-up wire with alligator clip(68.8 inches,workable whatever shorten or extend) installation with spark plug for instant engine signal detection..
  • WATER/SHOCK RESIST---- 100% epoxy resin sealing craft can be kept it away from the damp or moist.
  • INSTALLATION---- Easy to mount it by screw-on at any proper place..
  • OTHERS---- Built-in CR2450 battery with lifetime up 3 years.
  • Reliable technical support and after-sales service(2 years)..
Check Stock

Genuine Briggs & Stratton 393397 Fuel Pump Kit

  • Genuine Briggs & Stratton Part Number 393397.
  • Used On 3 Screw Fuel Pump Mount Carburetors.
Check Stock

Runleader Digital Tach Hour Meter,Engine Temperature Gauge,Alert RPM & Temp,Backlights Display for Lawn Tractor Compressor Generator Snowmobile Marine Jet Ski Pit Bike

  • HOURS ---- Monitor the total run time(TOT) and single working hours(JOB) of gas engine, with ability to program previous hours(INT) for an replacement.
  • Accomplish maintenance at recommend intervals to determine the due time(SVC).
  • RPM ----- Display the real-time RPM readout by vairous engine firing patterns setting to adjust engine idle speed.
  • Alert channel for revolution exceed reminder.
  • Viewable highest revolution since the engine started.
  • RPM measurement range: 0-25000RPM, Alert range: 100-25000RPM..
  • TEMP ---- Keep eyes on engine current and maximum temperature at all the times by probe senor.
  • Remind the temperature exceed for engine maintenance.
  • Easy to switch between Celsius and Fahrenheit.
  • Temp measurement & alert range: -20°C~+300°C(-4°F~+572°F).
  • BACKLIGHTS ---- Default green backlight will help to use it at night or dim place, you can set the backlight mode by always-on, OFF and automatical mode(OFF default, button to wake up) as request.
  • Red backlight will remind the engine RPM or TEMP exceed..
  • OTHERS ---- Easy to mount it on proper position by stick-on, screw-on and extra bracket(not include), one-wire wrapping of spark plug for signal detect (68.8inches, workable if shorten or e....
Check Stock

Westinghouse Lighting 7784600 LED Schoolhouse Indoor/Outdoor Energy Star Ceiling Fan Light Kit, Oil Rubbed Bronze Finish with White Opal Glass

  • 【Easy Installation】Every LED light engine is equipped with 3 wire nuts, and customers have two installation methods. One method is to use a center threaded screw type ceiling lamp to install, another way is to mount directly to a flat clamp base with magnet feet.
  • 【Wide Applications】This LED light replacement kit can replace ceiling light, ceiling fan light, pendant light, thread type ceiling lamp, surface mount ceiling lamp, wall light.
  • 【Energy Saving】Uses 24 watts while providing 2200 lumens of bright light. Replacing an incandescent light bulb with an LED ceiling light board saves 85% on your electric bills.
  • 【3Color Changing Temperature】You can preset your preferred light color temperature before installation: warm white(3000K), cool white(4000K), or daylight(5000K).
  • 【Dimmer 5-100%】The LED light engine retrofit kit compatible with most LED dimmers on the market, and realize the smooth adjustment of brightness from 5% to 100%.
  • 【Long Lifespan】This round LED light panel replacement use high-end LED lamp beads longer service life. Lifespan 50,000 hours which means ceiling fan light kits can be used for 17 years based on 8 hours/day.
Check Stock

GUGUGI 10 Pack Automotive Vinyl Wrap Felt Squeegee Soft Scraper Car Wrapping Tool Kits with Micro Fiber Felt for Auto Vinyl Wrap, Window Tint, Wallpaper Installation, 5Inch

  • 5PCS SET -- You will get 16mm & 17mm Engine Mount Socket Wrench, 18mm & 21mm Rear Camber Adjusting Wrench, 24mm Oil Filter Removal Wrench, all marked with the number. 12 point, tilt angle design, used with 3/8'' drive..
  • WHY NEED IT -- 1) 16mm/17mm wrench used for removing nuts from engine fixing screw. 2) Offset 18mm/21mm wrench for adjusting rear axle camber. 3) 24mm oil filter removal wrench for models with common rail engines with DSG gearboxes, help you change oil without removing the battery..
  • 1) 16MM & 17MM Engine Fixing Screws Wrench compatible with Mercedes Benz W124 W126 W140 W170 W201 W202 W203 W204 W210 W211 W219 W220 W221 models..
Check Stock

Rexka 10pcs Sight Shield & Trim Push-Type Retainer Compatible with GM 10382313 Cadillac STS, Pontiac Solstice and Saturn Sky 2009-05 Land Rover LR024316 Range Rover Evoque Jaguar XR812941

  • Other Names/GM:Partition Panel Clip. Radiator Support Access Cover Clip. Radiator Support Air Deflector Clip. Radiator Support Air Deflector Screw. Sight shield,retainer. Access Cover. Air Deflector Screw.
  • Other Names/Land Rover/Jaguar:Cowl Grille Panel Clip. Cowl Panel Clip. Engine Air Intake Hose Clip. Radiator Support Access Cover Clip. Radiator Support Splash Shield Clip. Side Cover,retainer Clip. Battery retainer. Cowl Grille Panel. Engine Air Intake Hose. Intake duct. Mount bracket retainer. Pin. Radiator Support Access. Radiator Support Splash Shield. Side retainer. Sight Shield..
  • Fits Cadillac STS, Pontiac Solstice and Saturn Sky 2005 - On.
  • Fits Defender 110, Defender 90, Discovery, Discovery Sport, Range Rover, Range Rover Evoque, Range Rover Sport: Fits all S-Type, X350, X150, X351, XF, F-Type, E-Pace models.
  • Meet or Exceed OEM Specification. Direct Fitment.Head Diameter: 24.5mm Stem Length: 13mm Fits Into 9mm Hole.
Check Stock

Jade Onlines Glossy Black Front Spoiler Chin Fairing Lower Cover for Harley Sportster Iron XL 883 XL1200

  • ~ It is aftermarket front spoiler used fFits for 2004-2014 Harley Davidson Sportster 883 XL1200 models,will not fit with engine guards.
  • ~ Injection molded from the high-impact material,Mount our black finish lower chin fairing on your bike for a more aggressive overall looking..
  • ~ Can prevent splash ups during riding,High-impact thick plastic front spoiler and metal bracket promise no cracks or chips,Fully cover your spoiler and prevent splash ups during riding..
  • ~ 1x Black Front Spoiler Mounting hardware set,Mounting accessories are included for easy installation.
  • ~ Please contact us to get the new screw if the product screw not fit..
Check Stock

Motorized Bicycle Offset Wide Frame Chopper Mount Kit

  • SOLUTION FOR CHOPPER BIKES: The Speed Demon Off Set Chopper mount is the solution to those difficult chopper bike builds. Making engine mount fabrication a thing of the past, this bracket will sit in your frame and provide a mount for your two stroke engine. No welding required, it's all bolt on!.
  • HEAVY DUTY: Constructed of laser cut high grade steel, the bracket is designed to bolt directly to your frame and secure your engine. It's compact design takes very little space in your frame so that you have extra space for any accessory you want to instill along side your engine kit..
  • EASY INSTALLATION: Installation is a breeze, just use the supplied u-bolts and clamp your bracket to your chopper bike and install your engine directly to the bracket. It's that simple!.
  • UNIVERSAL FIT: This chopper mount kit is designed to work with most standard 48cc, 60cc, 66cc and 80cc 2-stroke engines as well as most chopper style bikes such as the OCC Schwinn Bikes, Micargi Jaos, Micargi Prado Deluxe, Micargi Mustang GTS, and many other chopper frame style bikes!.
  • PACKAGE INCLUDERS: 1x Speed Demon Engine Bracket, 2x U-Bracket Mounts, 1x V-Bracket Mounts, 2x Vibration Dampening Hoses, 1x Bag of Nuts and Washer.
Check Stock

Hisoo 2 Pack LED Light Engine Retrofit Kit, 6inch 24W 2200Lm, 3CCT 3000K/4000K/5000K Dimmable, Ceiling Fan Light Kits, LED Light Engine for Ceiling Light, Ceiling Fan Light, Pendant, Lantern

  • 【3 Color Changing Temperature】You can preset your preferred light color temperature before installation: warm white(3000K), cool white(4000K), or daylight(5000K).
  • 【Dimmer 5-100%】The LED light engine retrofit kit suitable for most LED dimmers on the market, and realize the smooth adjustment of brightness from 5% to 100%.
  • 【Easy Installation】Every LED light engine is equipped with 3 wire nuts, and customers have two installation methods. One method is to use a center threaded screw type ceiling lamp to install, another way is to mount directly to a flat clamp base with magnet feet.
  • 【Wide Applications】This LED light replacement kit can replace ceiling light, ceiling fan light, pendant light, thread type ceiling lamp, surface mount ceiling lamp, wall light.
  • 【Energy Saving】Uses 24 watts while providing 2200 lumens of bright light. Replacing an incandescent light bulb with an LED ceiling light board saves 85% on your electric bills.
Check Stock

Mishimoto MMINT-F2D-08SL Performance Intercooler Compatible With Ford 6.4 Powerstroke 2008-2010 Silver

  • 63mm/2.5" Turbo Intercooler---- Universal Front Mount Turbo Intercooler with 63mm/2.5in inlet diameter. Model: XH-ZL238-SL. 100% brand new, please confirm whether the product is suitable before purchasing.
  • Cooling of Pressurized Air---- The front mount intercooler can reduce the intake temperature of the engine, improve the air exchange efficiency of the turbocharged engine, reduce engine fuel consumption. Excessively hot air will reduce the power of the engine.
  • High Performance---- This front mount intercooler adopts bar and plate design, reasonable structure, professional manufacturing, more stable and reliable performance. Timely replacement of old or damaged turbo intercooler for better cooling performance.
  • High Quality Aluminium Alloy---- The front mount intercooler is made of high-quality aluminium alloy material, which is wear-resistant and durable, not easy to damage and has long service life. The manufacture of the turbo intercooler meets the strict quality requirements.
  • Easy to Install---- Features mounting points at the top and bottom of the intercooler, easy to install. Ideal and direct replacement for old or damaged front mount turbo intercooler, dependable to use.
Check Stock

Subaru 75W90 Extra S Gear & Transmission Fluid - 5 quart Bottles Sti Wrx Genuine SOA427V1700 X5

  • Genuine Engine motor mount bracket set for your Turbo..
  • LH Mount bracket 41031AA290 X 1 RH Mount bracket 41031AA281 X1.
  • These are genuine OEM Subaru Engine Mount Plate part #'s are 41031AA281 & 41031AA290. These are needed to install the Torque Solution engine mounts in Subaru WRX 2006-2015 and STI 2006-2016..
  • DIRECT Fits: 2002-2014 WRX EJ255 2002-2014 STI EJ257.
  • 2004-2008 Forester turbo 2004-2006 Baja Turbo.
Check Stock

LS Conversion Engine Swap Mounts - Endxedo Adjustable Swap Motor Conversion Bracket for 1973-1998 Square Body for OBS Chevy GMC Truck 1988-1998 LS1 2WD Small Block LS Swap

  • LS Engine Swap Mount Fitment - LS Series Engines: ALL Chevrolet LS Series Engines:LS1, LS2, LS3, LS6, LS7, LS9, GM 4.8L 5.3L 5.7L 6.0L 6.2L(1997-2014),And 4.8L,5.3L,6.0L,6.2L (1999-2013) Vortec Truck Engines. Also Fits LSX LM7 LR4 LQ4 LQ9 L33 LH6 L92 L76 L99 L96 L82 L83 L84 L86 L87..
  • Compatible with - 1973-1987 Chevrolet / GMC 2WD, 4WD, Full Size C/K Trucks, Suburban, K5 Blazer, Jimmy, Sierra, Scottsdale, Silverado, Cheyenne, C10, C20, C30, K10, K20, K30. And 1988-1998 “OBS” Chevy / GMC 2WD, 4WD, Full Size C/K Series Trucks & SUVS. Suburban, Tahoe, Full Size 2 door Blazer, Yukon, Silverado, Sierra, C1500, C2500, C3500, K1500, K2500, K3500..
  • High Quality Materials - The heavy duty engine mount swap kit is made of premium High Carbon cold rolled steel with high strength and long durability. The surface is painted to prevent rust, and the quality is strictly controlled..
  • Installtion - There is slotted for adjustment with engine placement in the engine compartment. It can move the engine from the original bell housing position up to 1/2 inches forward, and up to 1 inch rearward to help you install motor correctly,very e....
Check Stock