Categories

Best Engine Oil Cooler Line

Engine Oil Cooler Kit - Compatible with Ford Trucks - Powerstroke 6.0L V8 F250, F-350, F450, F550 Super Duty, Excursion, E350, E-450 - Replaces Part 904-228, OCK388, 3C3Z 6A642 CA - Gasket Seal Kit

  • Replacement Engine Oil Cooler With Gasket Seals & O-Rings - Is a heat-exchanger which is commonly a radiator type of cooler which cools engine oil from the engine. It removes excess heat from the oil using the engine coolant that flows around as the engine oil passes through the cooler. The engine oil cooler can be located under the intake above the engine..
  • Compatible Replacement for Ford Vehicles - 2004 - 2005 E-350 Club Wagon | 2004 - 2010 E-350 Super Duty | 2004 - 2007 E-450 Super Duty | 2003 - 2005 Excursion | 2003 - 2007 F-250 Super Duty | 2003 - 2007 F-350 Super Duty | 2003 - 2007 F-450 Super Duty | 2003 - 2007 F-550 Super Duty |..
  • Replaces Part# 3C3Z 6A642 CA, 904228, 904-228, 015339, OCK388, 3C3Z-6A642-CA, 3C3Z6A642CA - If you are noticing engine oil in your coolant system, oil or coolant leaking from the oil cooler or engine coolant mixed with your engine oil then your oil cooler might need to be looked at or replaced. This engine oil cooler kit also includes viton gasket seals needed for the proper service on your vehicle..
  • OEM Fit, Quality, Finish - While this is not a genuine OEM part, it is a direct replacement and it will fit and work exactly like the factory part. This part is commonly found on popular Powerstroke 6.0 V8 models....
Check Stock

EONLION 10 Row AN10-10AN Oil Cooler Kit Universal Engine Transmission Aluminium Alloy Black Usable To Cool Down Engine Oil Increases Engine Oil Capacity Available Comes with 2 Oil Lines

  • ADVANTAGES- Made of high quality T-6061 aluminum. It can be used to cool engine oil, transmission and rear differential..
  • FUNCTION- Keep the oil temperature low to prevent damage or even seizure of the engine..
  • HOW IT WORKS- The 10-row oil cooler is basically like a radiator to cool your oil. Install the engine oil in a reasonable location with good air, your engine oil will enter the engine oil from here, and then reflux and cool down, and ensure that the engine oil is within a certain working temperature range..
  • ADAPTATION- This is a universal oil cooler kit. The design of this oil cooler is smaller and lighter, suitable for narrow spaces and meet the needs of more lines at the same time..
  • WHY DO WE NEED AN OIL COOLER KIT-When the engine rotates at high rpm under high load, it will generate friction, and the heat generated by friction will be transferred to the oil instead of overheating. After the engine oil is decomposed, it cannot be lubricated well, thus shortening the service life of the engine..
Check Stock

Jobs USA Search

  • 【Compatible】Engine oil cooler fits for 3.6L V6 engine. Replacement part number is 5184294AE. Before ordering, please confirm whether the accessories are suitable for your vehicle. 2011-2013 dodge journey.
  • 【Advantage】The oil cooler uses 8 layers of thickened aluminum and 8 layers of thin aluminum, thick and thin cross double layer design, can cool the oil into the engine, with superior cooling rate.
  • Oil filter housing comes with a new high quality pre-installed oil filter, it allows the engine oil to be strained through the filter and remove foreign particles to keep your engine running clean..
  • 【High-quality Sensors】Our sensors are oil temperature sensors, fluid temperature sensor and oil pressure sensors that meet professional specifications. Using professional ultrasonic welding technology, as well as the sensor threads have been made thread adhesive sealing t....
Check Stock

Cool Your Engines (Original Mix)

  • 【Compatible】Engine oil cooler fits for 3.6L V6 engine. Replacement part number is 5184294AE. Before ordering, please confirm whether the accessories are suitable for your vehicle. 2011-2013 dodge journey.
  • 【Advantage】The oil cooler uses 8 layers of thickened aluminum and 8 layers of thin aluminum, thick and thin cross double layer design, can cool the oil into the engine, with superior cooling rate.
  • Oil filter housing comes with a new high quality pre-installed oil filter, it allows the engine oil to be strained through the filter and remove foreign particles to keep your engine running clean..
  • 【High-quality Sensors】Our sensors are oil temperature sensors, fluid temperature sensor and oil pressure sensors that meet professional specifications. Using professional ultrasonic welding technology, as well as the sensor threads have been made thread adhesive sealing t....
Check Stock

EVIL ENERGY 10AN Fuel line Hose Braided Nylon Stainless Steel Oil Gas CPE 10FT Black

  • Application: AN10 braided fuel line widely used as transmission cooler line, fuel return line, fuel supply line, coolant fluid hose, engine cooler line..
  • Nylon and stainless steel braided fuel line can be compatible with transmission fluid, coolant, oil, pump gas, race gas, vacuum, hydraulic fluid, diesel and fuel..
  • Maximum Working Pressure: 500psi. Bursting Pressure: 2000psi. Temperature Range: -40℉ to 257℉..
  • Inside Diameter: 9/16". Outside Diameter: 0.78inch. Length: 10 Feet. Please measure before purchase!.
  • EVIL ENERGY provide this product 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message..
Check Stock

5184294AE Engine Oil Cooler and Oil Filter Housing Adapter Assembly Compatible with 2011-2013 Chrysler 200 300 Town & Country, Wrangler, Dodge Charger, Ram 1500 V6 3.6L

  • [Fitment] 5184294AE engine oil cooler fit for2011-2013 Chrysler Town ＆ Country, 2011-2013 Chrysler 300, 2011-2013 Chrysler 200, 2011-2013 Dodge Journey, 2011-2013 Dodge Grand Caravan, 2011-2013 Dodge Durango, 2011-2013 Dodge Charger, 2011-2013 Dodge Challenger, 2011-2013 Dodge Avenger, 2012-2013 Jeep Wrangler , 2011-2013 Jeep Grand Cherokee, 2012 Ram C/V, 2013 Ram 1500.
  • Replace Part Number] 5184294AC, 5184294AD, 5184304AD, 5184304AE, 5184304AF, 5184294AE oil filter housing with Oil Filter Housing Adapter Assembly Sensor..
  • [Feature] Engine oil cooler made of 8-layer thick plates and 8-layer thin plates, cross double-layer design, which increases cooling efficiency. Helping to extend the life of the oil and engine. The engine oil cooler can keep the engine oil cool and clean..
  • [Perfect Replacement] Our oil cooler and filter housing kit with sensors and gaskets can perfect replacements for damaged ones and work flawlessly..
  • [ Warranty ] We provide a 6-month warranty,If you have any questions,please contact us via amazon, and we will reply you within 24 hours..
Check Stock

6.0L Powerstroke Oil Cooler Flush Kit,Blue Anodize Adapter Flush Adapter for Ford 2003 2004 2005 2006 2007 2008 2009 2010 Diesel

  • Made of by high quality aluminum and Brass,prevent high oil temperature result in costly fuel systems and engine failure.Instead of spending a high price to replace the 6.0-liter oil cooler, it is more appropriate to spend a little free time to clean it. And our products can be used repeatedly..
  • With our 6.0L Power Stroke Oil Cooler Flush Kit, the oil cooler can be backflushed in less than an hour. By directing the water flow in the opposite direction of normal travel, contaminants are removed and, in most cases, the cooler is restored to new effectiveness..
  • No need to remove the plant cooling manifold. Coolant enters the cooler from the oil cooler, and when disturbed, the quick connection hose between the oil cooler and the cooler will usually start to leak, resulting in rewinding. Our device will not interfere with the original connection..
  • It is advisable to regularly monitor the Delta T (difference between oil temperature and coolant temperature) while operating the engine under load. If the temperature difference exceeds specification we recommend performing an oil cooler flush. Careful attention to this detail can prevent thousands of dollars of engine and fuel system damage. In the case of a cooling system that has experienced extreme neglec....
Check Stock

Feoie 926-876 Aluminum Engine Oil Filter Housing with Oil Filter and Cooler Sensors Assembly Fit for 2011-2016 Chrysler 200 300, Dodge Charger, Jeep, Ram 1500, Promaster, 3.6L V6, 926-959 68105583AF

  • [ Perfect Replacement for Plastic Oil Filter Housing ] - The original plastic oil filter housing was prone to damage and leaks and allowed debris to enter the oil on a regular basis, which could damage engine components and clog the oil filter. Our upgraded oil filter housing is made entirely of aluminum to prevent leaks, cracks, and warping, which is a perfect replacement for plastic oil filter housings.
  • [ Fitment ] - Aluminum oil filter housing for 2014-2016 Jeep Grand Cherokee | 2014-2016 Jeep Cherokee | 2014-2016 Jeep Wrangler | 2011-2016 Dodge Journey | 2014-2016 Dodge Charger | 2011-2016 Dodge Challenger | 2011-2016 Dodge Durango | 2011-2016 Dodge Grand Caravan | 2011-2014 Dodge Avenger | 2013-2016 Ram 1500 | 2015 Ram C/V | 2014-2016 Ram Promaster 1500 | 2014-2016 Ram Promaster 2500 | 2014-2016 Ram Promaster 3500, 2011-2016 Chrysler 200 | 2011-2016 Chrysler 300 | 2011-2016 Chrysler Town Country.
  • [ Oil Cooler Replacement ] - 926-876 aluminum engine oil filter housing for 926-959 926-876 68105583AF engine oil cooler, 68105583AA 68105583AB 68105583AC 68105583AD 68105583AF 68105583AG, engine oil cooler 5184294AE.
Check Stock

Vintage Monster Truck Are My Jam Retro Sunset Cool Engines Long Sleeve T-Shirt

  • 【Compatible】Engine oil cooler fits for 3.6L V6 engine. Replacement part number is 5184294AE. Before ordering, please confirm whether the accessories are suitable for your vehicle. 2011-2013 dodge journey.
  • 【Advantage】The oil cooler uses 8 layers of thickened aluminum and 8 layers of thin aluminum, thick and thin cross double layer design, can cool the oil into the engine, with superior cooling rate.
  • Oil filter housing comes with a new high quality pre-installed oil filter, it allows the engine oil to be strained through the filter and remove foreign particles to keep your engine running clean..
  • 【High-quality Sensors】Our sensors are oil temperature sensors, fluid temperature sensor and oil pressure sensors that meet professional specifications. Using professional ultrasonic welding technology, as well as the sensor threads have been made thread adhesive sealing t....
Check Stock

EVIL ENERGY 10 Row AN10 Oil Cooler Kit Universal 10AN Engine Transmission Aluminium Alloy Black

  • Universal:universal oil cooler,you may need to do some custom modifications and require other hardware to meet your needs.Please measure before purchase to make sure there is enough space for installation..
  • Installation location:choose a place with good and cold air through the oil cooler kit for installation.Instruction included..
  • Function:keep low oil temperature, help to improve the lubricating effect of engine oil, prevent parts damage and prolong engine life.Usable to cool down engine oil,transmission, and rear-differentials.Besides,this stacked-plate oil cooler design smaller and lightweight suitable for narrow space..
  • Size:10AN 10Row oil cooler,Oil Capacity:0.24L.Test pressure: 116psi,burst pressure:232psi.Material:aluminium alloy..
  • EVIL ENERGY provide this product have 3-month warranty. Any problem you might have ,please feel free to contact us via Amazon message..
Check Stock

EVIL ENERGY 15 Row AN10-10AN Oil Cooler Kit Universal Engine Transmission Aluminium Alloy Black

  • Universal: universal oil cooler,you may need to do some custom modifications and require other hardware to meet your needs.Please measure before purchase to make sure there is enough space for installation..
  • Installation location: choose a place with good and cold air through the oil cooler kit for installation.Instruction included..
  • Function: keep low oil temperature, help to improve the lubricating effect of engine oil, prevent parts damage and prolong engine life.This stacked-plate oil cooler can be used to cool down engine,transmission, and rear-differentials..
  • Size: 10AN 15Row oil cooler,Oil Capacity:0.8L.Test Pressure: 116psi,Burst Pressure:232psi.Material:aluminium alloy..
  • Please measure before purchase.EVIL ENERGY provide this product have 3-month warranty. Any problem you might have ,please feel free to contact us via Amazon message..
Check Stock

WEILEITE 3.6 Engine Oil Cooler Filter Housing

  • *NEW UPGRADED QUALITY & Improved Manufacturing. Products made in better raw material, Seal upgrade, New Fluororubber gaskets are more durable and prevent leaks better. Make the engine oil cooler have a longer service life..
  • A good oil cooler filter adapter will help prevent oil leaking, keep the engine room working at the normal oil temperature and oil pressure, make you have a safe and pleasant journey..
  • This Engine Oil Cooler Filter is Compatible with 2013 Ram 1500 6 Cyl 3.6L.
  • 2012 2012 2013 Ram C/V 6 Cyl 3.6L. Adapter-Engine Oil Filter, OE No. 5184294AE.
  • Replacement for 2011 2012 2013 Chrysler 200,300,Town & Country.
  • Dodge Avenger,Challenger,Charger,Durango,Grand Caravan,Journey.
  • Jeep Grand Cherokee,Wrangler 6 Cyl 3.6L..
  • Any questions please contact us, we are always here to provide professional help! ***All products are produced according to standard specifications and have been quality-verified before leaving the factory. Some customers think that the size of the product is not suitable, it may be that your model is a little different, and you can use it with simple modifications..
Check Stock

Xtensi Engine Oil Cooler and Oil Filter Housing Adapter Assembly Compatible With 2011-2013 Jeep, Chrysler 200/300,Dodge Journey Charger Caravan 3.6L Aluminium, Replaces 5184294AE

  • Oil Filter Housing Adapter is not a genuine part, it is a direct replacement and will fit, work and look exactly like the factory part. Replace Part Number: 5184294AE. Please check the part number before purchase..
  • Only for 3.6L 6 cyl engine. Compatible with 6 cyl 3.6L engine 2011-2013 Chrysler 200, 2011-2013 Chrysler 300 V6 3.6L, 2011-2013 Chrysler Town and Country V6 3.6L, 2011-2013 Avenger V6 3.6L, 2011-2013 Challenger V6 3.6L, 2011-2013 Charger V6 3.6L, 2011-2013 Journey V6 3.6L, 2011-2013 Caravan V6 3.6L, 2011-2013 Durango V6 3.6L, 2011-2013 Grand Cherokee V6 3.6L, 2012-2013 Wrangler V6 3.6L, 2013 Ram 1500 V6 3.6L, 2012-2013 Ram C/V Base V6 3.6L..
  • Advantage: Keep the engine oil clean and cool. This replacement oil cooler housing comes with a new pre-installed oil filter, it allows the engine oil to be strained through the filter and remove foreign particles to keep your engine running clean. Beside that, it also cool down the oil that enters the engine. Direct replacement. Fluorocarbon and HNBR sealing rings are resistant to oil, abrasion and temperature..
  • The oil cooler is made of lightweight aluminum alloy, has 16-plate (8 plate thick and 8 plate thin), can be better cooling. Oil filter housing adapter oil cooler kit comes with a complete set of ....
Check Stock