Categories

Best Engine Oil Coolers

FIT FOR - 2010 2014 Acura TSX, 2010-2013 Acura ZDX, 2012 Alfa Romeo 159, 2015 Alfa Romeo 4C, 2012-2014 Alfa Romeo Giulietta, 2012-2013 2015 Alfa Romeo Mito, 2011-2012 VPG MV-1

  • DECREASE OIL TEMPERATURES – By using a good design as the famous oil coolers, we are able to increase oil capacity, decrease oil temperatures, and extend engine and oil cooler’s life.
  • LONG LIFETIME – All components are closely inspected and validated to meet the strictest quality standards to ensure a long lifetime.
  • SIZE – Adapter Thread Size is3/4×16 / M20x1.5. 2 1/8″ NPT Bung Covers.
  • CHECK CAREFULLY – Please be sure to check the fitment and package quantity before you purchase the goods.
Check Stock

Engine Oil Cooler And Filter Housing Adapter Kit EONLION Sensor Kit Replacement Compatible With 2014-2017 Chrysler 200/300 for Dodge Journey Jeep Wrangler Ram 3.6L Aluminium Silver 68105583AF

  • This is the most up-to-date version of the Genuine Ford OEM Engine Oil Cooler. Like ALL OEM Oil cooler this oil cooler comes with OEM gaskets & the oil cooler screen. All of our coolers do have the updated extra cooling layer..
  • If your EOT & ECT have more than a 20-25 degree variation, your oil cooler is on its way out. Replace it before it becomes an issues. If you replace your defective or failing oil cooler with anything other than the OEM Updated Oil Cooler, you are asking for trouble down the road..
  • This is a new Ford factory oil cooler built by International.
  • Compatible with all 2003-2007 Ford 6.0L Powerstroke diesel trucks.
Check Stock

ECCPP Radiator Cooling Fan Kit Assembly Replacement fit for 2007-2009 Kia Sorento 3.3L 3.8L

  • ...kit fits 2007-2009 Kia Sorento 3.3L 3.8L.
  • RADIATOR FUCTION – Innovative engineering,manufacturing technology and quality control ensure that ECCPP radiators meet or exceed the performance of the original equipment radiators they replace.
  • that extends to all components,including engine and transmission oil coolers.
  • COOLING FAN FUCTION – Engine cooling requires a constant supply of fresh air,The radiator cooling fan draws air past the fins of the radiator core to lower the coolant temperature that will circulate through the engine,and our cooling fans are powered electronically,It receives a signal from a coolant temperature sensor when the engine is running too hot, and it turns the cooling fan assembly on.
  • HIGH QUALITY – ECCPP’s assemblies are designed to be a direct replacement for the original equipment manufacturer’s part. That means installation is easier, and the part fits as intended.Our assemblies are also tested to OEM specifications, so you know the part you’re putting on performs as good or better than the part you’re taking off.
  • ATTENTION – Don’t forget to search for See all vehicles before purchasing the items and you can also look though the information including picture just avoid bu....
Check Stock

16" Black Electric Radiator Cooling Fan Wide S-Curved 10 Blades Thermostat Kit High 3000 CFM Reversible Push or Pull with Mounting Kit Heavy Duty 12Volts

  • 16 inch reversible 12 volt electric cooling fan，Powerful 120 watt motor will keep your engine cool..
  • Blade Size: 16 Inch；Blade Type: Curved；Motor Size: 120 Watts；CFM Rating:1000；RPM Rating: 2250；Amp Draw: 6.6 Amps；Material: Plastic Shroud/Steel Motor。.
  • Thermostat Kit Universal fit for any automotive vehicle，Activates by grounding electric fans at preset temperature，180'F turn-on temperature, 165'F turn-off temperature，Probe typically threads into radiator, water outlet or manifold..
  • The thermostat kit is a universal fit, which makes it the perfect choice for any automotive vehicle and electric fan. ，The thermostat activates by grounding electric fans at preset temperature，It features a 180 degree Fahrenheit turn-on temperature and a 165 degree Fahrenheit turn-off temperature..
  • The 3/8" NPT thread-in brass probe with 1/2" NPT adapter are included，Fits For radiators, oil coolers, transmission coolers, condensers and more..
Check Stock

Overhaul Kit Includes Pistons with Rings, Gasket Set, Crankcase Sealer, Crankshaft Seals Compatible with Kohler Engines CH25, CH26, CH730, CH735, CH740, CH745, CH750, CV25, CV26, CV724, 83mm Bore

  • Quality Reproduction from Lil Red Barn not made in China or Taiwan.
  • Be Sure To Verify Your Engine Has A 83mm Bore Before Ordering!.
  • Integrated oil coolers extend oil-change intervals and maintain low temperatures during the entire power range.
  • High-efficiency, heavy-duty air filters provide protection from debris and ensure longer service intervals.
  • Extra-large sleeve bearings support heavy loads in commercial and industrial environments.
Check Stock

SCITOO Auto Parts Radiator2585 Fit For 2003-2006 for Kia Sorento

  • COMPATIBILITY - Radiator fits 2003 2004 2005 2006 for Kia Sorento.
  • FEATURE - Built with high density multi-Lowered fins for Maximum cooling efficiency.
  • OE design to ensure exact fit,form and function for an easy drop-in installation.
  • Gasket and rings are thermal shocked to ensure durability in extreme cold weather.
  • DETAIL - Radiator,innovative engineering,manufacturing technology and quality control ensure that Murray heavy duty radiators meet or exceed the performance of the original equipment they replace.That extends to all components,including engine and transmission oil coolers.
  • CONTACT US - If you do not make sure whether this item fits to you please feel free to message us via Amazon Messaging.
  • Or you can also search for See all vehicles in our shop before purchasing.
  • SERVICE - If you have any questions about our cooling fan replacement, never mind contact our friendly,helpful,and knowledgeable customer service representatives,we will be glad to address any questions or concerns promptly. And 1 YEAR WARRANTY..
Check Stock

Mishimoto MMOC-EVO-08 Oil Cooler Kit Compatible With Mitsubishi Lancer Evo X 2008-2015 Silver

  • Direct fit for 2008+ Mitsubishi Lancer Evolution X.
  • Includes two 19-row oil coolers run in series for optimum cooling.
  • Adapts to thermostatically controlled stock oil housing.
  • Mounting brackets also serve as ducting to channel air to coolers.
Check Stock

Zerostart 3400072 Silicone Pad Heater Engine Oil, Transmission Fluid, Reservoir and Hydraulic Fluid Heater, 2¼\ x 4\ | 120 Volts | 125 Watts

  • Quickly Warm Your Engine - In the cold winter days, use silicone car engine heater pad will fast heat up your engine oil pan ensure that your engine and transmission fluid circulates efficiently before starting.
  • Heat Up Oil Flow - Self-adhesive oil pan heater pad battery heater pad engine block heater pad will improve oil flow, transmits heat to keep engine oil as a thin fluid, giving you instant lubrication when starting your engine, reduces engine wear and tear.
  • Silicone Covered & Thermostatically Controlled - Silicone coating resists oil, acid, and water, and adds strength and longevity to these oil pan, reservoir and transmission pan.
  • heat for 10 to 15 minutes that keeps the heating temperature at a constant 194 F /90°C, increases engine longevity and extends transmission life.
  • Built-In Overheat Protector - 4 x 5 inch/10.2 x 12.7cm car engine heater pad is rated at 120 volts and produces up to 150 watts, oil pan heater pads built-in automatic thermal protector, effectively preventing safety hazards caused by high temperatures.
  • Easy Set Up - Easy to install, as car engine heater pad requires little mechanical ability, before use, please wipe clean the dust on the surface to keep it dry, and peel off the paper backing from the oil pan heater pad and a....
Check Stock

Mishimoto MMOC-EVO-08BK Oil Cooler Kit Compatible With Mitsubishi Lancer Evo X 2008-2015 Black

  • Compatible with 2008+ Mitsubishi Lancer Evolution X.
  • Includes two 19-row oil coolers run in series for optimum cooling.
  • Adapts to thermostatically controlled stock oil housing.
  • Mounting brackets also serve as ducting to channel air to coolers.
Check Stock

EONLION 10 Row AN10-10AN Oil Cooler Kit Universal Engine Transmission Aluminium Alloy Black Usable To Cool Down Engine Oil Increases Engine Oil Capacity Available Comes with 2 Oil Lines

  • ADVANTAGES- Made of high quality T-6061 aluminum. It can be used to cool engine oil, transmission and rear differential..
  • FUNCTION- Keep the oil temperature low to prevent damage or even seizure of the engine..
  • HOW IT WORKS- The 10-row oil cooler is basically like a radiator to cool your oil. Install the engine oil in a reasonable location with good air, your engine oil will enter the engine oil from here, and then reflux and cool down, and ensure that the engine oil is within a certain working temperature range..
  • ADAPTATION- This is a universal oil cooler kit. The design of this oil cooler is smaller and lighter, suitable for narrow spaces and meet the needs of more lines at the same time..
  • WHY DO WE NEED AN OIL COOLER KIT-When the engine rotates at high rpm under high load, it will generate friction, and the heat generated by friction will be transferred to the oil instead of overheating. After the engine oil is decomposed, it cannot be lubricated well, thus shortening the service life of the engine..
Check Stock

Mopar 82215366 Front End Cover Jeep Gladiator Wrangler W/ Diesel Engine

  • Replacement Engine Oil Filter - The engine oil filter is designed to protect and capture harmful contaminants like carbon, sand, dust, and bits of metal that circulates into your engine. It filters the oil to prolong its life and to provide long lasting engine protection..
  • Compatible Replacement for Jeep & Ram Diesel 3.0L Vehicles - 2021 Gladiator 3.0L | 2020-2021 Wrangler 3.0L | 2020-2021 1500 3.0L | It is important to have clean motor oil because dirty oil can wear the oil pump’s machined components and damage the bearing surfaces in the engine. The oil filter helps remove pollutants from your car engine’s oil that can accumulate over time..
  • Replaces Part# 68507598AA, 68498720AA commonly found on popular Gladiator, Wrangler or 1500 models including year models 20, 21. If you are experiencing acceleration problems, metallic noises under the hood or low oil pressure your oil filter might need to be replaced..
  • OEM Fit, Quality, Finish - While this is not a genuine OEM part, it is a direct replacement and will look, fit and work exactly like the factory part. Oil filter should be replaced every time the oil ....
Check Stock

Engine Oil Cooler Kit - Compatible with Ford Trucks - Powerstroke 6.0L V8 F250, F-350, F450, F550 Super Duty, Excursion, E350, E-450 - Replaces Part 904-228, OCK388, 3C3Z 6A642 CA - Gasket Seal Kit

  • Replacement Engine Oil Cooler With Gasket Seals & O-Rings - Is a heat-exchanger which is commonly a radiator type of cooler which cools engine oil from the engine. It removes excess heat from the oil using the engine coolant that flows around as the engine oil passes through the cooler. The engine oil cooler can be located under the intake above the engine..
  • Compatible Replacement for Ford Vehicles - 2004 - 2005 E-350 Club Wagon | 2004 - 2010 E-350 Super Duty | 2004 - 2007 E-450 Super Duty | 2003 - 2005 Excursion | 2003 - 2007 F-250 Super Duty | 2003 - 2007 F-350 Super Duty | 2003 - 2007 F-450 Super Duty | 2003 - 2007 F-550 Super Duty |..
  • Replaces Part# 3C3Z 6A642 CA, 904228, 904-228, 015339, OCK388, 3C3Z-6A642-CA, 3C3Z6A642CA - If you are noticing engine oil in your coolant system, oil or coolant leaking from the oil cooler or engine coolant mixed with your engine oil then your oil cooler might need to be looked at or replaced. This engine oil cooler kit also includes viton gasket seals needed for the proper service on your vehicle..
  • OEM Fit, Quality, Finish - While this is not a genuine OEM part, it is a direct replacement and it will fit and work exactly like the factory part. This part is commonly found on popular Powerstroke 6.0 V8 models....
Check Stock

JIFETOR Oil Pressure Gauge Tester Kit Engine Transmission Fluid Test Tool Set 12PCS, 500psi Automotive Mechanical Automatic Gearbox Line Pressure Meter for Car Truck Motorcycle ATV

  • ENGINE AND TRANSMISSION OIL PRESSURE TEST AND DIAGNOSTIC: This oil pressure tester kit is used for measuring oil pressure on lubrication system quickly and accurately. The oil pressure gauge readings assist to diagnose if there are following problems: blocking oil strainer or oil filter, broken pressure-limiting valve spring, poorly working oil pump, low/high oil viscosity, blocking lubrication oil channel, blocking oil filter core and by-pass valve is difficult to open etc..
  • EASY TO CHECK ENGINE OIL PRESSURE: Remove low oil pressure switch, attach the engine pressure tester with appropriate adapter, start engine to read the pressure on the gauge. Verify vehicle oil pressure is normal or not against manufacturer's recommended readings. Turn off the engine and remove the engine oil pressure tester, replace the low oil pressure switch, then done..
  • FITMENT TYPE: The transmission pressure gauge kit includes 12PCS selectable brass connectors (include the one on hose), very sturdy and durability. These connectors can be connected to the corresponding sizes oil pressure test service port, on most vehicles with gasoline or diesel engine, includes car, motorcycle, ATV, truck and so on..
  • PRESSURE GAUGE AND HOSE: Transmission pressure gauge adopts rubber cover pro....
Check Stock