Categories

Best Engine Oil Drain Hose

Dorman 090-038CD Oil Drain Plug Standard M12-1.25, Head Size 14Mm Compatible with Select Models

  • Important function: The important function of the magnetic drain plug is to attract and help remove the fine metal particles in the crankcase oil, allowing the oil to flow through the engine more easily. High-performance racing cars and street engines rely on these as additional safeguards..
  • Strong protection: The high-strength magnet of the drain valve plug prevents harmful metal scraps from entering the engine. These plugs have a very powerful magnet that can help collect these debris directly from the oil during operation..
  • Engine and oil pan protection: The sealing and anti-vibration mechanism of the engine drain plug can reduce the risk of engine damage due to catastrophic oil loss due to the loss of the drain plug..
  • Easy to install: Our oil drain plug requires no installation tools and can be installed in a few seconds. Before installation, please put the gasket in the groove to prevent the drain pipe from loosening..
  • Applicable models: The replacement of the oil drain plug is perfectly suitable for Ford F150 Raptor, and for Ford Mustang 2015-2019, 14*1.5 models..
Check Stock

Oil Filter Drain Tool Oil Filter Release Hose Tube Pipe Fit for Toyota, Lexus, Scion 2.0L - 5.7L Engines with Cartridge Style Oil Filter System

  • ...ATURES ADN ADVANTAGES：changing the cartridge type Toyota oil filters is messy compared to their old spin on oil filters. After using this tool to empty the oil filter housing, the job of changing the oil filter cartridge is a lot neater ..
  • FITS THE FOLLOWING VEHICLE MODELS: Fit for Toyota, Lexus, Scion 2.0L - 5.7L Engines with cartridge style oil filter system. If you are not sure whether the oil filterdrain tool will fit, please contact us before purchasing..
  • WHAT YOU'LL GET: 1x Engine Oil Drain Hose, Place order with 100% confidence, we provide 1 click refund for our valued customers in 3month. Please feel free to contact us if you have any questions and we are always stand by your side to issue your problems..
Check Stock

Yonput 1 PC M12 x 1.25 Magnetic Oil Drain Plug with Four Spacers, Sump Drain Nut Bolt Compatible with Most BMW, Used for Reduces Debris, Car Accessories (Red)

  • Engine Protection: This oil drain plug can be a good safegurad of your engine. It can filtrate up fine iron particles, and keep your engine oil clean so as to extend life of your engine. So your car engine will not be easily malfunctioned..
  • High Quality: This oil drain plug is made of high quality aluminum, it has the advantages of low density, high strength. It is strong and durable. The oil drain plug can be used for a long time..
  • Fitment: The oil drain plug is perfectly fit on Honda, Mazda, Hyundai KIA, BMW and more vehicles with M12 x 1.25 threaded. Package contains 4 spacers. Please make sure your car type belongs to the above type before ordering..
  • Easy to Use: It is very simple and convenient for you to use this oil drain plug. You can easily install and remove this oil drain plug. It can effectively protect your engine, so that your car service life is longer..
  • After Sale: If you have any question on use, kindly contact us at any time directly, we will solve the problem for you within 24 hours on weekdays..
Check Stock

ALAVENTE Universal Oil Catch Can Tank with Breather 400ml Aluminum Dual Cylinder Polish Baffled Engine Air Oil Separator Tank Reservoir Kit Black

  • √ STRENGTH & DURABILITY - The oil catch can breather made of high quality 0046 aluminum to provide you with higher strength and durability. And it's also very lightweight, universal for most car..
  • √ PRESERVE ENGINE LIFE&INCREASES HORSEPOWER - This oil catch tank catch the oil and moisture in the blow-by gas that causes carbon and sludge build-up in the intake system and the engine. The catch can will keep out the dirt and oil get inside your engine from your intake system. To keep engine clean, Increases horsepower and preserve engine life.
  • √ HARD TO OIL LEAKAGE & EASY TO CLEAN - Large oil catch can with drain valve, it is fully tig welded and thread come with o-ring gasket to prevents oil leakage.You also don't need dismount it, just need to unscrew the bottom part of the reservoir, then you can clean it down easily.
  • √ 2 METHODS OF INSTALLATION - Come with air filter, you could use it as vented system, or you could ignore it. Any way you need. There is also a washable stainless screw on filter / breather with hose clamp to stop it coming loose with vibration.
  • √ 400ML CAPACITY for UNIVERSAL CAR - The capacity is 400ml, enough for daily use.
Check Stock

Briggs & Stratton 44S677-0018 Professional Series 22 HP 724cc V-Twin Engine 1 x 3-5/32 9 Amp

  • Briggs and Stratton 22 HP 724cc Professional Series Engine.
  • 1 x 3-5/32 inch keyed crankshaft 16amp alternator.
  • Common replacement engine for consumer riding mowers and z-turns.
  • Please measure your old engine crankshaft, as Briggs makes 1 x 3-5/32, 1-1/8 x 4-5/16 and others.
Check Stock

Outboard Oil Tank Assembly Compatible with Mercury/Mariner 200HP 225HP 250HP 2000 2003-2010 2013, Diesel Engine Oil Reservoir Tank Replacement Part, New | OE: 1200-8M0064075, 1200-884525T1

  • Feature: The aluminum oil catch can could cool hot oil vapor and turn into liquid and catching the oil and moisture oil vapor, keeps engine clean and prolongs engine life. External oil pipe can check the liquid level, and removable bottom to drain make it reusable and more easier to clean. (It can be reusable, when it gets too full of oil you have to empty it then re-install)..
  • Function: Mostly it is used to trap the oil that comes with gases from the combustion process and thus prevent accumulation in the valves in engines. Then you'll be preventing misfires due to carbon accumulation in the valves..
  • Compatible: Universal fit for most cars. Please confirm the size of the oil catch can inlet and outlet and purchase the corresponding size of the oil hose, you also need to buy clamps to fix oil hose..
  • Material: Polished 0.5L Oil Catch Can is made of lightweight Aluminium T-6061 for strong strength and good durability (Notice: It's easy to scratch because it's made of aluminum, do not affect usage effect). Polished tank body has great appearance. Oil Catch Can Diameter: 3.0in / 76.20mm. Height: 5.58in / 141.70 mm..
  • Warranty: SPELAB provide oil catch can kit 12-month warranty. If you have any other problem, please contact us by Amazon message. (No instructio....
Check Stock

Lisle 38780 22' Square No-Splatter Pad

  • 22” Square Pad Protects Floors & Work Area from Messy Oil Splatter..
  • Insert 22" square pad in transmission drain funnels or larger oil drain pans, before oil change to eliminate oil splatter..
  • Porous material allows fluid to quickly pass through into funnel or pan..
  • Pad material resists engine oil, transmission fluid, coolant, brake fluid, brake cleaner, gear oil and other solvents..
  • Pad material resists engine oil, transmission fluid, coolant, brake fluid, brake cleaner, gear oil and other solvents.Pad material resists engine oil, transmission fluid, coolant, brake fluid, brake cleaner, gear oil and other solvents..
  • Important: Not for coolants or fluids that will be recycled in the vehicle. Material fibers may contaminate the fluid..
Check Stock

SWANLAKE 6.5 Liter Pneumatic/Manual Fluid Extractor Pump,Oil Changer Vacuum Fluid Extractor,Oil Change & Fluid Change Tool

  • Pneumatic mode and manual mode to fit all situation. The manual mode could be used by itself without any other equipments.The pneumatic mode turns the pump into a high-speed oil changer as long connect with air compressor..
  • 6.5L vacuum fluid extractor comes with 5 different diameter tubes go to the bottom of oil pan. also 3.2 feet flex hose and 3 extra dipstick hoses to reach the bottom of the reservoir and suck up all fluid..
  • Fast suction speed of 1.8L/min. The oil change pump extracts engine oil from a 4-cylinder car in a couple of minutes in pneumatic mode..
  • Use this oil extractor pump, the engine oil and transmission fluid could be extracted directly by the dipstick tube, the sealing cap is attached to stop the liquid from spill during transportation..
  • Its a perfect tool for working on vehicles anytime and anywhere.no need to lift up or crawl under the car to drain out the oil.NOTE:fluids with high volatility, high corrosion, high alkalinity and high temperature CANT be used..
Check Stock

JIFETOR Fuel Injection Pump Pressure Test Gauge Set, Automotive Gas Gasoline Fuel Oil Injector Tester Tool Kit 0-140PSI, with Schrader Adapters Universal Compatible with Ford Auto Car Truck Motorcycle

  • FUEL PRESSURE GAUGE TESTER: Automotive fuel injector tester tests if the fuel supply & injection system work normally, help to judge if there are broken internal components or faulty oil lines. Specific tool for fuel system detecting and troubleshooting. Fuel pressure gauge kit suits a variety of gasoline engines on car, truck, SUV, Motorcycle, ATV, RV, etc (Bosch, CIS Jetronic, Throttle Body System on GM vehicles excluded), not for diesel high pressure injection pump or direct-injection engine.
  • UPGRADED FUEL PRESSURE GAUGE TOOL KIT: The set is equipped with various fittings and hoses to connect for testing. 15"L hose is used for hooking up directly to the 1/4" SAE standard Schrader valve on fuel pump, 5-1/2"L hose for small Schrader valve (compatible with some Ford), and 8"L hose for M6 fuel pressure test port, and there are also M8/M10/M12/M14 adapters for the corresponding test port on fuel rail. The aluminum tee can splice in-line between the fuel pump and engine for most vehicles.
  • 140PSI/10BAR PRECISION-MACHINED FUEL PUMP TESTER GAUGE: You just need to ensure there is an adapter in the kit suitable for your test port or the inline connection is workable for your car. Pressure gauge adopts rubber cover protected 3-1/2" large dial and dual color cod....
Check Stock

JIFETOR Oil Pressure Gauge Tester Kit Engine Transmission Fluid Test Tool Set 12PCS, 500psi Automotive Mechanical Automatic Gearbox Line Pressure Meter for Car Truck Motorcycle ATV

  • ENGINE AND TRANSMISSION OIL PRESSURE TEST AND DIAGNOSTIC: This oil pressure tester kit is used for measuring oil pressure on lubrication system quickly and accurately. The oil pressure gauge readings assist to diagnose if there are following problems: blocking oil strainer or oil filter, broken pressure-limiting valve spring, poorly working oil pump, low/high oil viscosity, blocking lubrication oil channel, blocking oil filter core and by-pass valve is difficult to open etc..
  • EASY TO CHECK ENGINE OIL PRESSURE: Remove low oil pressure switch, attach the engine pressure tester with appropriate adapter, start engine to read the pressure on the gauge. Verify vehicle oil pressure is normal or not against manufacturer's recommended readings. Turn off the engine and remove the engine oil pressure tester, replace the low oil pressure switch, then done..
  • FITMENT TYPE: The transmission pressure gauge kit includes 12PCS selectable brass connectors (include the one on hose), very sturdy and durability. These connectors can be connected to the corresponding sizes oil pressure test service port, on most vehicles with gasoline or diesel engine, includes car, motorcycle, ATV, truck and so on..
  • PRESSURE GAUGE AND HOSE: Transmission pressure gauge adopts rubber cover pro....
Check Stock

Shell Rotella T5 Synthetic Blend 15W-40 Diesel Engine Oil (1 Gallon, Single Pack)

  • Synthetic blend 15W-40 diesel engine oil with Triple Protection Plus technology protects against wear, deposits, and oil breakdown.
  • Ideal for on-highway fleets, construction, and agricultural machinery, and diesel pickup trucks — including high-power vehicles that require resistance to heat and stress.
  • Improves low-temperature flow (compared to conventional 15W-40 oils).
  • Helps control engine deposits for reliability at extended oil drain intervals (always follow the OEM recommended oil drain interval).
  • Controls engine wear 37 percent better than the maximum wear requirements in API CK-4 engine wear tests.
Check Stock

Oil Tanker Truck Transport Crash Car Engine Game

  • [Specification] The oil drain plug is made of material of ABS. Its color is yellow and its inner hole diameter is 11mm / 0.43"..
  • [Fitment] Fit for Ford for Mustang GT350, GT350R 5.2L V8 - Gas 2015-2020, for Ford Fusion Sport 2.7L V6 - Gas 2017-2019, for Ford Edge Sport 2.7L V6 - Gas 2015-2018, for Ford F-150 Lariat, XL, XLT 2.7L V6 - Gas 2015-2017, for Ford F-250 Super Duty King Ranch, Lariat, XL, XLT 6.7L V8 - Diesel 2011 2012, for Ford F-350 Super Duty King Ranch, Lariat, XL, XLT 6.7L V8 - Diesel 2011 2012.
  • [Replace Part Number] FT4Z-6730-A BC3Z-6730-A.
  • [Feature] Good tightness, prevent oil leakage problem and effectively solve the problem of oil spill. Oil drain plug directly fits for your car, just replaces your old or broken engine oil drain plug..
  • [Package Include] 5 x Engine Oil Drain Plugs.
Check Stock

JDMON Oil Catch Can Tank Kit with Breather 300ml Aluminum Polish Engine Air Oil Separator Tank Reservoir Kit Universal (Blue)

  • 6061 Aluminum Durable Quality: JDMON oil catch can with breather is made of sturdy T6061 aluminum for enhanced strength and durability,not easy to be damaged and lasted for long time.Note: The hose can’t resist high temperature, you’d better purchase another rubber vacuum hose to meet your demand..
  • Increases Horsepower& Keep Engine Clean: This universal oil catch can catch the oil and moisture in the blow-by gas that causes carbon and sludge build-up in the intake system and the engine. It will prevent the dirt and oil from your intake system into your car engine which can keep the engine clean and preserve engine life..
  • Prevent Oil Leak: JDMON oil catch can kit is built-in o-rings which can prevent oil leak..
  • Easy to Use & Clean: This oil catch can set came with dipstick, measuring fluid level no need to open the can. The material of it is polished, so it’s easy to clean, no need any tools..
  • Package Includes: 1*300ml oil catch can, 1*hose,1*Breather Filter, Necessary Bracket & Screws as picture shows.
Check Stock