GlowShift Oil Filter Sandwich Plate Thread Adapter - 20mm x 1.5 Thread - Install up to (4) 1/8-27 NPT Oil Pressure & Temperature Sensors - Includes O-Ring & Port Plugs

  • GlowShift Oil Filter Sandwich Adapter Allows Users to Install (4) 1/8-27 NPT Oil Pressure and/or Oil Temperature Sensors to the Oil Filter of Your Vehicle - Installs Between the Engine Block & Oil Filter.
  • Features (1) Aluminum Sandwich Plate Adapter with (4) 1/8-27 NPT Female Thread Ports, (1) M20 x 1.5 Thread, (4) 1/8-27 NPT Flush Mount Port Plugs & (1) O-Ring for a Leak-Free Seal.
  • Note: This Oil Filter Adapter is Only Compatible if the Gasket Diameter of Your Oil Filter is 3" or Less.
  • Includes Step-By-Step Installation Instructions.
  • GlowShift Guarantee with One Year Limited Warranty & Free Lifetime Technical Support.
Check Stock

Replacement Engine Oil Filter - Compatible with Jeep Gladiator, Wrangler & Ram 1500 3.0L Vehicles - Replaces 68507598AA, 68498720AA - 2020, 2021 - 3 Liter Diesel Engines

  • Replacement Engine Oil Filter - The engine oil filter is designed to protect and capture harmful contaminants like carbon, sand, dust, and bits of metal that circulates into your engine. It filters the oil to prolong its life and to provide long lasting engine protection..
  • Compatible Replacement for Jeep & Ram Diesel 3.0L Vehicles - 2021 Gladiator 3.0L | 2020-2021 Wrangler 3.0L | 2020-2021 1500 3.0L | It is important to have clean motor oil because dirty oil can wear the oil pump’s machined components and damage the bearing surfaces in the engine. The oil filter helps remove pollutants from your car engine’s oil that can accumulate over time..
  • Replaces Part# 68507598AA, 68498720AA commonly found on popular Gladiator, Wrangler or 1500 models including year models 20, 21. If you are experiencing acceleration problems, metallic noises under the hood or low oil pressure your oil filter might need to be replaced..
  • OEM Fit, Quality, Finish - While this is not a genuine OEM part, it is a direct replacement and will look, fit and work exactly like the factory part. Oil filter should be replaced every time the oil ....
Check Stock

iFJF 68235275AA Fuel Filter and 68229402AA Oil filter Replacement for Ram 1500 2014-2019 3.0L V6 EcoDiesel Engine Replaces 68109834AA WF10245

  • Fitment:Both the fuel filter and oil filter fit Ram 1500 2014-2019 3.0L V6 EcoDiesel Engine..
  • Part Number:Fuel filter:68235275AA,L5693F,56086,WF10245,CS11997,300245.
  • Fuel filter:The premium diesel fuel filters support your engine's demand for optimum fuel flow by effectively filtering harmful Particles and water..
  • Engine oil filter:Provide high flow rates and superior filtration efficiency with a premium filtration media to help improve engine performance.High....
  • Warm hint:Replacing your diesel fuel filter & oil filter is important to maintain the longevity of a strong, smooth running engine,please replace oil....
Check Stock

Feoie 926-876 Aluminum Engine Oil Filter Housing with Oil Filter and Cooler Sensors Assembly Fit for 2011-2016 Chrysler 200 300, Dodge Charger, Jeep, Ram 1500, Promaster, 3.6L V6, 926-959 68105583AF

  • [ Perfect Replacement for Plastic Oil Filter Housing ] - The original plastic oil filter housing was prone to damage and leaks and allowed debris to enter the oil on a regular basis, which could damage engine components and clog the oil filter. Our upgraded oil filter housing is made entirely of aluminum to prevent leaks, cracks, and warping, which is a perfect replacement for plastic oil filter housings.
  • [ Fitment ] - Aluminum oil filter housing for 2014-2016 Jeep Grand Cherokee | 2014-2016 Jeep Cherokee | 2014-2016 Jeep Wrangler | 2011-2016 Dodge Journey | 2014-2016 Dodge Charger | 2011-2016 Dodge Challenger | 2011-2016 Dodge Durango | 2011-2016 Dodge Grand Caravan | 2011-2014 Dodge Avenger | 2013-2016 Ram 1500 | 2015 Ram C/V | 2014-2016 Ram Promaster 1500 | 2014-2016 Ram Promaster 2500 | 2014-2016 Ram Promaster 3500, 2011-2016 Chrysler 200 | 2011-2016 Chrysler 300 | 2011-2016 Chrysler Town Country.
  • [ Oil Cooler Replacement ] - 926-876 aluminum engine oil filter housing for 926-959 926-876 68105583AF engine oil cooler, 68105583AA 68105583AB 68105583AC 68105583AD 68105583AF 68105583AG, engine oil cooler 5184294AE.
Check Stock

Engine Oil Cooler and Filter Housing Adapter Kit 68105583AF 68105583AE Replacement for Chrysler Dodge 3.6L V6 Vehicles 200 Town & Country Grand Caravan Wrangler Ram

  • With Intake Manifold Plenum Gasket Set- Keeps the engine oil clean as it circulates through the engine. This replacement Oil Filter Housing Adapter Kit also comes with a new oil filter pre-installed for a complete and worry free installation..
  • Function- Replacement engine oil cooler & filter housing adapter kit with Intake Manifold Plenum Gasket Set.It allows the engine oil to be strained through the filter and remove foreign particles to keep your engine running clean.Beside that, it also cool down the oil that enters the engine.
  • Easy to install- Using high-quality materials, it can be directly replaced and installed, which is simple and fast..
  • Fitment- 2014-2017 Chrysler 200 3.6L engine, 2014-2016 Chrysler Town & Country 2014-2018 for Dodge Challenger, 2014-2017 for Dodge Charger, 2014-2015 for Dodge Durango, 2014-2016 for Dodge Grand Caravan, 2014-2017 for Dodge Journey, 2014-2016 for Dodge Ram Promaster, 2014-2017 for Dodge Ram, 2014-2015 Grand Cherokee, 2014-2017 Wrangler and 2014-2016 Cherokee 3.2L engine..
  • Tips- Professional installation is highly recommended. we provide after-sales service for oil filter housing cooler assembly..
Check Stock

68436631AA Fuel Filter Compatible with 2019-2022 Ram 2500 3500 4500 5500 6.7L Diesel Engine,Ram 1500 3.0L V6 Eco Diesel Frame Chassis Mounted,Jeep Wrangler/Gladiator 3.0L V6 Diesel #PF46152(4Pcs)

  • Replacement Engine Oil Filter - The engine oil filter is designed to protect and capture harmful contaminants like carbon, sand, dust, and bits of metal that circulates into your engine. It filters the oil to prolong its life and to provide long lasting engine protection..
  • Compatible Replacement for Jeep & Ram Diesel 3.0L Vehicles - 2021 Gladiator 3.0L | 2020-2021 Wrangler 3.0L | 2020-2021 1500 3.0L | It is important to have clean motor oil because dirty oil can wear the oil pump’s machined components and damage the bearing surfaces in the engine. The oil filter helps remove pollutants from your car engine’s oil that can accumulate over time..
  • Replaces Part# 68507598AA, 68498720AA commonly found on popular Gladiator, Wrangler or 1500 models including year models 20, 21. If you are experiencing acceleration problems, metallic noises under the hood or low oil pressure your oil filter might need to be replaced..
  • OEM Fit, Quality, Finish - While this is not a genuine OEM part, it is a direct replacement and will look, fit and work exactly like the factory part. Oil filter should be replaced every time the oil ....
Check Stock

Genuine OEM Toyota Oil Filter 90915-YZZD3 (4PK) with DIINGO Plug Oil Drain Gasket 90430-12031 (4PK) Fit for 4Runner FJ Cruiser Land Cruiser Sequoia Tacoma Tundra

  • The Pressure Release Valve: Oil filters clog when exposed to excess contaminants. This clogging can restrict the flow of oil to the engine causing severe damage. The Pressure Relief Valve of a Genuine Toyota Oil Filter opens only when the filter is clogged allowing oil to flow to the engine. The valve on some non-genuine Toyota oil filters open at lower pressures, allowing unfiltered oil to the engine even when the filter is not clogged..
  • The Filter Element: The Toyota approved element effectively filters contaminants while meeting all Toyota Parts specifications for oil flow. By comparison, a lesser quality element may clog over time, which could lead to engine seizure or other potential engine problems. Some non-genuine Toyota oil filters do not meet Toyota’s stringent specifications..
  • The Anti-Drainback Valve: Genuine Toyota Oil Filters feature an Anti-Drainback Valve that prevents oil from draining out of the engine and into the oil pan. This helps protect your engine from increased wear during cold-starts..
Check Stock

PJ1 15-202 Foam Filter Care Kit - 28 Ounces, Black

  • Foam Filter Cleaner: The kit includes a specially formulated foam filter cleaner that dissolves and removes dirt, grime, and other contaminants from foam air filter with a simple spray on, wash off process..
  • Foam Filter Oil Treatment: The kit also includes a high-quality foam filter oil that with its NEW, SUPER TACKY formulation, sand, grit and other abrasive particles harmful to internal engine parts, are removed from intake air. This improved product is both water repelling and non-settling..
  • Easy to Use: The PJ1 15-202 foam filter care kit is easy to use and comes with clear instructions that make it simple for anyone to maintain their foam air filter..
  • Improves Engine Performance: Regular use of the PJ1 15-202 foam filter care kit can help improve engine performance by ensuring that the engine receives clean, filtered air..
  • High-Quality Materials: The foam filter cleaner and oil included in the kit are made from high-quality materials that are safe for use on foam air filters and won't damage your engine or filter glues..
Check Stock

Engine Oil Cooler Filter Housing Kit with Gaskets, Cap & Seals - Replaces 55566784, 88179-91400 - Compatible with Buick & Chevy 1.4L Vehicles - Encore, Cruze, Cruze Limited, Sonic, Trax

  • Replacement Engine Oil Cooler & Filter Housing Assembly - With Gaskets, Cap & ACM Seals - Keeps the engine oil clean and cool as it circulates through the engine. This replacement Oil Filter Housing Adapter Kit also comes with a new oil filter pre-installed for a complete and worry free installation. If you are experiencing oil leaks above the transmission or near the cooler housing where the oil filter is then you may have a problem with your oil cooler and filter housing..
  • Compatible Replacement for Buick & Chevrolet Vehicles with 1.4L L4 Engine - 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021 Encore | 2011-2015 Cruze | 2016 Cruze Limited | 2012-2018 Sonic | 2013-2021 Trax |. The oil filter housing can easily be located above the engine and can be accessed by removing the intake manifold..
  • Replaces Part# 55566784, 918-428, 650039, 88179-91400, 55593189, 55594651, 55565385, 55565388 usually found on popular Encore, Cruze, Cruze Limited, Sonic Trax including year models 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21. It is best and practical to replace the whole housing rather than waste time trying to find where the leak is as it can be from the cracks on the housing or seals..
  • OEM Fit, Quality, Finish - While this is not a genuine OEM....
Check Stock

Pack of 2 Engine Oil Filter OEM 15208-EZ40A with Drain Plug Compatible with Nissan Titan 2016 - 2019 Cummins Diesel ISV 5.0 lf17517

  • ☑️ Top quality/ Guaranteed. Do you want to avoid damage to your vehicle's engine? replacing the oil filter is even more important than changing the air or fuel filter. this oem filter will protect your vehicle by keeping harmful particles and dirt out, preventing premature wear and engine failure.
  • t your vehicle by keeping harmful particles and dirt out, preventing premature wear and engine failure..
  • Engine Oil Filter : Original part made with a unique blend of natural and synthetic materials in the media for better oil filtration and enhanced engine protection.
  • Oil drain plug gasket : this part is made of corrosion resistant and highly durable materials helping to keep the engine oil cool while it is in the vehicle's crankcase and waiting to turn the engine over again.
  • Compatible with Nissan Titan 2016, 2017, 2018, 2019 5.0 l v8 - Diesel.
Check Stock

R W Beckett Corp 4504 KING Oil Tank Gauge

  • Prolongs your engine life by filtering the oil mist and other substances contained in blow-by gas.
  • Petcock drainer at the bottom for easy draining.
  • Twin Breather Filter Deisgn, Built-in dual internal baffle plate.
  • Capacity : 1.2L Large capacity with bigger ports, ideal for big cc engine.
  • Made of high quality 2.5mm aluminum sheet, TIG welded construction.
Check Stock

Oil Pressure Switch Filter Fit for Chevy GMC Cadillac Buick Pontiac Engine Valve Lifter Oil Filter Suitable for AFM Fuel Supply Assembly

  • This part is made from quality materials to ensure reliable performance and long service life. This engine oil pressure sensor filter is designed to....
  • Reliable replacement for an original part that has failed due to clogging.This engine oil pressure sensor filter is designed to match the fit and....
  • The primary purpose of this filter is to clean oil that flows into the AFM lifters. Putting it on the AFM oil supply assembly can also protect the oil....
  • Always replace your oil and main engine oil filter when you change this filter. Please check this AFM filter at each oil change until you understand....
  • Getting to the filter housing was a bit of a challenge, but once you got the old filter out, you could see why the truck was running so rough. After....
Check Stock

Kohler 52 050 02-S Engine Oil Filter Extra Capacity for CH11 - CH15, CV11 - CV22, M18 - M20, MV16 - MV20 and K582, 2 Pack

  • COMPATIBILITY INFO: Engine oil filter for air-cooled, V-Twin Kohler engines. Grasshopper Part Number 100802 For Kohler Confidant, Command, Command Pro & Command Pro EFI V-twin engines Grasshopper FrontMount 618, 718K, 620T, 623T, 723KH2, 723T, 725KT, 727T 727K, 727T6 & 727T EFI Models Grasshopper MidMount 120K, 125V, 225V-Gr, 227V-G4 EFI, 329G4, 333G5, 218, 220, 223, 225, 227, 327 EFI OEM spin-on oil filter..
  • GENUINE OEM PARTS: Protect your investment and ensure peak performance by trusting only genuine OEM replacement parts and supplies to maintain your engine. These parts are manufactured to meet ultra-precise engineering specifications, and can help you maximize performance and significantly extend the life of your machine..
  • OIL FILTER REPLACEMENT: This item replaces the following oil filter parts: Ariens 20715100, Husqvarna 531307392, Kohler 25 050 27, 25 050 27-S, 25 050 33-S, 25 050 34-S, 52 050 02, 52 050 02-S, 52 050 02-S1..
  • KOHLER ENGINE COMPATIBILITY: A genuine replacement engine oil filter for your Kohler engine, this part fits the following Kohler engine models: CH11-CH25, CV11-CV22, M18-M20, MV16-MV20 and K582..
  • FILTER SPECIFICATIONS: This oil filter 2-pack measures 8.54 x 3.66 x 3.27 inches and weighs 0.95 pounds. Thread 3/4"-16 OD 3" Heigh....
Check Stock