Categories

Best Engine Oil Filter Relocation Fittings

Ecodiesel Engine Oil Filter 68507598AA 68498720AA Compatible with Jeep 2021 Wrangler JL,2021 Gladiator,2020-2021 Ram 1500 DT

  • 【Replaces Part】Replaces Part #: 68507598AA, 68498720AA Oil Filter and Oil Filter Housing Cap Assembly..While this is not genuine OEM part, it is a....
  • 【Compatible with】Engine Oil Filter Compatible with Jeep EcoDiesel 3.0L V6 Vehicles2020-2021 Wrangler JL,2021 Gladiator.Ram EcoDiesel 3.0L V6....
  • 【Replacement Engine Oil Filter 】It is usually to change the engine oil filter easily ,because it is on the top of the engine near the front or on....
  • 【OEM Fit, Quality, Finish】Engine oil filter is manufactured in full accordance with the standards of OE parts, and 100% factory inspection is....
  • 【Lifetime Warranty】The engine oil filter assembly from KASSEN comes complete with a lifetime warranty.If there ia any problem on your Jeep....
Check Stock

Drainzit STAN1438 Oil Change Aid for Briggs & Stratton Tecumseh 3/8' Oil Port

  • Drainzit oil hoses make changing oil easier and cleaner. Drainzit is easy to install, simple to use and requires no engine modification. For use on nearly all equipment powered by small engines: pressure washers, generators, pumps/sprayers, compressors, lawn mowers and more. Fits most briggs and stratton, tecumseh engines with 3/8 in. pipe thread oil drain port, Kohler command and OHC 16 and 18 HP Fittings convert to SAE wrench sizes Efficient - custom made metric fittings seal kit to.
  • Fits most briggs and stratton, tecumseh engines with 3/8 in. pipe thread oil drain port, Kohler command and OHC 16 and 18 HP.
  • Efficient - custom made metric fittings seal kit to engine with O-ring.
  • Rubber retainer loop holds kit in place when not in use.
Check Stock

Mopar 82215366 Front End Cover Jeep Gladiator Wrangler W/ Diesel Engine

  • Replacement Engine Oil Filter - The engine oil filter is designed to protect and capture harmful contaminants like carbon, sand, dust, and bits of metal that circulates into your engine. It filters the oil to prolong its life and to provide long lasting engine protection..
  • Compatible Replacement for Jeep & Ram Diesel 3.0L Vehicles - 2021 Gladiator 3.0L | 2020-2021 Wrangler 3.0L | 2020-2021 1500 3.0L | It is important to have clean motor oil because dirty oil can wear the oil pump’s machined components and damage the bearing surfaces in the engine. The oil filter helps remove pollutants from your car engine’s oil that can accumulate over time..
  • Replaces Part# 68507598AA, 68498720AA commonly found on popular Gladiator, Wrangler or 1500 models including year models 20, 21. If you are experiencing acceleration problems, metallic noises under the hood or low oil pressure your oil filter might need to be replaced..
  • OEM Fit, Quality, Finish - While this is not a genuine OEM part, it is a direct replacement and will look, fit and work exactly like the factory part. Oil filter should be replaced every time the oil ....
Check Stock

Sinister Diesel Oil Filter & Coolant Filtration System For FORD POWERSTROKE 2003-2007 6.0L Diesel with All Hardware - No Drilling Or Part Removal Required - Easy Installation

  • PROLONG ENGINE & OIL LIFE: Using Sinister Diesel Oil Filter & Coolant Filtration System you can prolong the life expectancy of your oil and engine. As time passes, the oil starts losing its quality due to contaminants coupled with dirty coolant that causes significant damage to your engine. Our Coolant Filtration System for Oil Filter & Coolant Filtration System minimizes contaminants in oil and filter coolant to increase the lifespan of your engine..
  • FOR FORD POWERSTROKE 2003-2007: This Coolant Filtration System Kit and oil filter kit is made specifically for FORD POWERSTROKE models between 2003-2007 to provide a precise installation without having to remove any engine parts or drill any new holes.
  • PREMIUM GRADE CONSTRUCTION: To provide the finest oil filtration kit and coolant filtration kit we used the finest quality CNC machined billet 6061 aluminum to ensure long-term use to reliably bypass and filter small amounts of contaminants in the oil and coolant while to increase 6.0L Diesel engine lifespan..
  • EASY INSTALLATION: Sinister Diesel Water Coolant & Oil Filter Bypass System for FORD POWERSTROKE comes with everything you need right out the box so that you can install it easily. This Water coolant filtration kit includes 1) Amsoil 2 Micron Oil ....
Check Stock

Replacement Engine Oil Filter - Compatible with Jeep Gladiator, Wrangler & Ram 1500 3.0L Vehicles - Replaces 68507598AA, 68498720AA - 2020, 2021 - 3 Liter Diesel Engines

  • Replacement Engine Oil Filter - The engine oil filter is designed to protect and capture harmful contaminants like carbon, sand, dust, and bits of metal that circulates into your engine. It filters the oil to prolong its life and to provide long lasting engine protection..
  • Compatible Replacement for Jeep & Ram Diesel 3.0L Vehicles - 2021 Gladiator 3.0L | 2020-2021 Wrangler 3.0L | 2020-2021 1500 3.0L | It is important to have clean motor oil because dirty oil can wear the oil pump’s machined components and damage the bearing surfaces in the engine. The oil filter helps remove pollutants from your car engine’s oil that can accumulate over time..
  • Replaces Part# 68507598AA, 68498720AA commonly found on popular Gladiator, Wrangler or 1500 models including year models 20, 21. If you are experiencing acceleration problems, metallic noises under the hood or low oil pressure your oil filter might need to be replaced..
  • OEM Fit, Quality, Finish - While this is not a genuine OEM part, it is a direct replacement and will look, fit and work exactly like the factory part. Oil filter should be replaced every time the oil ....
Check Stock

iFJF 68235275AA Fuel Filter and 68229402AA Oil filter Replacement for Ram 1500 2014-2019 3.0L V6 EcoDiesel Engine Replaces 68109834AA WF10245

  • Fitment:Both the fuel filter and oil filter fit Ram 1500 2014-2019 3.0L V6 EcoDiesel Engine..
  • Part Number:Fuel filter:68235275AA,L5693F,56086,WF10245,CS11997,300245.
  • Fuel filter:The premium diesel fuel filters support your engine's demand for optimum fuel flow by effectively filtering harmful Particles and water..
  • Engine oil filter:Provide high flow rates and superior filtration efficiency with a premium filtration media to help improve engine performance.High....
  • Warm hint:Replacing your diesel fuel filter & oil filter is important to maintain the longevity of a strong, smooth running engine,please replace oil....
Check Stock

Fuel Line Kit 3/8\ 6AN 20FT Fuel Hose Nylon Stainless Braided CPE Oil Fuel Injection Line Fitting Kit Universal

  • 20Ft Fuel Injection line with 6AN fittings: The package includes 10pcs 6an swivel hose ends (4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree) and 3/8 braided fuel line. All the an fittings feature a reusable spin-lock connector.
  • Universal Application: The AN6 nylon braided fuel hose can be worked with coolant, diesel, oil, hydraulic fluid, pump gas, air, and fuel. This braided fuel line mostly used in brake system, fuel pump, fuel filter, oil return, fuel return system, turbo cooler system, transmission system and oil cooler kit, etc. Easily enough line here to run all the way from your fuel tank to the engine.
  • Excellent Flexibility and Durability: The Black Braided Steel Fuel Hose made of Nylon and Stainless Steel Braided + CPE Synthetic Rubber.
  • The hose end AN fittings is made of high strength T6061 Aluminum, polished and anodized surface provide the bright appearance, corrosion protection and strong strength.
  • Safety Features: The 6an push lock hose working temperature range: -40℉ to 350℉ (-40℃ to 176℃). Maximum Working Pressure (psi): 500 psi. Bursting Pressure(psi): 2000psi. Braided gas line Inner diameter: 0.34 inch, outside diameter: 0.56inch. Please measure before purchase.
  • No Worry To Buy: Excellently Sealed, no leaking. We of....
Check Stock

Feoie 926-876 Aluminum Engine Oil Filter Housing with Oil Filter and Cooler Sensors Assembly Fit for 2011-2016 Chrysler 200 300, Dodge Charger, Jeep, Ram 1500, Promaster, 3.6L V6, 926-959 68105583AF

  • [ Perfect Replacement for Plastic Oil Filter Housing ] - The original plastic oil filter housing was prone to damage and leaks and allowed debris to enter the oil on a regular basis, which could damage engine components and clog the oil filter. Our upgraded oil filter housing is made entirely of aluminum to prevent leaks, cracks, and warping, which is a perfect replacement for plastic oil filter housings.
  • [ Fitment ] - Aluminum oil filter housing for 2014-2016 Jeep Grand Cherokee | 2014-2016 Jeep Cherokee | 2014-2016 Jeep Wrangler | 2011-2016 Dodge Journey | 2014-2016 Dodge Charger | 2011-2016 Dodge Challenger | 2011-2016 Dodge Durango | 2011-2016 Dodge Grand Caravan | 2011-2014 Dodge Avenger | 2013-2016 Ram 1500 | 2015 Ram C/V | 2014-2016 Ram Promaster 1500 | 2014-2016 Ram Promaster 2500 | 2014-2016 Ram Promaster 3500, 2011-2016 Chrysler 200 | 2011-2016 Chrysler 300 | 2011-2016 Chrysler Town Country.
  • [ Oil Cooler Replacement ] - 926-876 aluminum engine oil filter housing for 926-959 926-876 68105583AF engine oil cooler, 68105583AA 68105583AB 68105583AC 68105583AD 68105583AF 68105583AG, engine oil cooler 5184294AE.
Check Stock

Engine Oil Cooler and Filter Housing Adapter Kit 68105583AF 68105583AE Replacement for Chrysler Dodge 3.6L V6 Vehicles 200 Town & Country Grand Caravan Wrangler Ram

  • With Intake Manifold Plenum Gasket Set- Keeps the engine oil clean as it circulates through the engine. This replacement Oil Filter Housing Adapter Kit also comes with a new oil filter pre-installed for a complete and worry free installation..
  • Function- Replacement engine oil cooler & filter housing adapter kit with Intake Manifold Plenum Gasket Set.It allows the engine oil to be strained through the filter and remove foreign particles to keep your engine running clean.Beside that, it also cool down the oil that enters the engine.
  • Easy to install- Using high-quality materials, it can be directly replaced and installed, which is simple and fast..
  • Fitment- 2014-2017 Chrysler 200 3.6L engine, 2014-2016 Chrysler Town & Country 2014-2018 for Dodge Challenger, 2014-2017 for Dodge Charger, 2014-2015 for Dodge Durango, 2014-2016 for Dodge Grand Caravan, 2014-2017 for Dodge Journey, 2014-2016 for Dodge Ram Promaster, 2014-2017 for Dodge Ram, 2014-2015 Grand Cherokee, 2014-2017 Wrangler and 2014-2016 Cherokee 3.2L engine..
  • Tips- Professional installation is highly recommended. we provide after-sales service for oil filter housing cooler assembly..
Check Stock

68436631AA Fuel Filter Compatible with 2019-2022 Ram 2500 3500 4500 5500 6.7L Diesel Engine,Ram 1500 3.0L V6 Eco Diesel Frame Chassis Mounted,Jeep Wrangler/Gladiator 3.0L V6 Diesel #PF46152(4Pcs)

  • Replacement Engine Oil Filter - The engine oil filter is designed to protect and capture harmful contaminants like carbon, sand, dust, and bits of metal that circulates into your engine. It filters the oil to prolong its life and to provide long lasting engine protection..
  • Compatible Replacement for Jeep & Ram Diesel 3.0L Vehicles - 2021 Gladiator 3.0L | 2020-2021 Wrangler 3.0L | 2020-2021 1500 3.0L | It is important to have clean motor oil because dirty oil can wear the oil pump’s machined components and damage the bearing surfaces in the engine. The oil filter helps remove pollutants from your car engine’s oil that can accumulate over time..
  • Replaces Part# 68507598AA, 68498720AA commonly found on popular Gladiator, Wrangler or 1500 models including year models 20, 21. If you are experiencing acceleration problems, metallic noises under the hood or low oil pressure your oil filter might need to be replaced..
  • OEM Fit, Quality, Finish - While this is not a genuine OEM part, it is a direct replacement and will look, fit and work exactly like the factory part. Oil filter should be replaced every time the oil ....
Check Stock

Genuine OEM Toyota Oil Filter 90915-YZZD3 (4PK) with DIINGO Plug Oil Drain Gasket 90430-12031 (4PK) Fit for 4Runner FJ Cruiser Land Cruiser Sequoia Tacoma Tundra

  • The Pressure Release Valve: Oil filters clog when exposed to excess contaminants. This clogging can restrict the flow of oil to the engine causing severe damage. The Pressure Relief Valve of a Genuine Toyota Oil Filter opens only when the filter is clogged allowing oil to flow to the engine. The valve on some non-genuine Toyota oil filters open at lower pressures, allowing unfiltered oil to the engine even when the filter is not clogged..
  • The Filter Element: The Toyota approved element effectively filters contaminants while meeting all Toyota Parts specifications for oil flow. By comparison, a lesser quality element may clog over time, which could lead to engine seizure or other potential engine problems. Some non-genuine Toyota oil filters do not meet Toyota’s stringent specifications..
  • The Anti-Drainback Valve: Genuine Toyota Oil Filters feature an Anti-Drainback Valve that prevents oil from draining out of the engine and into the oil pan. This helps protect your engine from increased wear during cold-starts..
Check Stock

PJ1 15-202 Foam Filter Care Kit - 28 Ounces, Black

  • Foam Filter Cleaner: The kit includes a specially formulated foam filter cleaner that dissolves and removes dirt, grime, and other contaminants from foam air filter with a simple spray on, wash off process..
  • Foam Filter Oil Treatment: The kit also includes a high-quality foam filter oil that with its NEW, SUPER TACKY formulation, sand, grit and other abrasive particles harmful to internal engine parts, are removed from intake air. This improved product is both water repelling and non-settling..
  • Easy to Use: The PJ1 15-202 foam filter care kit is easy to use and comes with clear instructions that make it simple for anyone to maintain their foam air filter..
  • Improves Engine Performance: Regular use of the PJ1 15-202 foam filter care kit can help improve engine performance by ensuring that the engine receives clean, filtered air..
  • High-Quality Materials: The foam filter cleaner and oil included in the kit are made from high-quality materials that are safe for use on foam air filters and won't damage your engine or filter glues..
Check Stock

Oil Pressure Gauge Adapter, 1/8in NPT Female to M10x1.0 Male Reducer Oil Pressure Gauge Adapter Replacement Black

  • [ IMPORTANT ] VMS RACING Brand Design (NOT generic). Comes in VMS RACING Branded BOX. Brand New in Box / Never Used / Never Installed..
  • High Quality Silver Face 0-60 Psi Triple Chromed Oil Pressure Gauge with TWO Triple Chromed Plated Fittings and O-ring included to match the gauge and for a long-lasting finish. EVERYTHING IS TRIPLE CHROMED... EVEN ALL OF THE FITTINGS so you will NOT see any brass . Beautiful finish to compliment your most prized Harley. PERFECTLY DRESSED FOR ANY OCCASION. If you have other nice chrome pieces on your ride, this gauge will feel right at home and a must-have..
  • Measurements: Gauge face (w/ bezel) - 1.66" (42.25mm) Gauge Case - 1.62” (41mm) Gauge Depth ~ 1” (25mm) Fitment: Fits (70-84 Shovelhead) (84-99 Evolution) and (38-69 & 84-91 Big Twin Models) Engines ONLY. Fittings allow for a FLAT MOUNT (or) 45 Degree Mount depending on the application. Triple-chromed / Brass INTERNALS. 1/8 NPT main Male Fitting.
  • VMS RACING Oil Pressure Gauge Kit Provide you with a MORE ACCURATE OIL PRESSURE READING than Liquid Filled Oil Pressure Gauges. Liquid Filled Gauges tend to lose the liquid due to Engine Vibration. You eliminate that problem with this gauge. This Kit allows for accurately measuring Oil pressure in your Big Twin Engine. ....
Check Stock