Categories

Best Engine Oil Pressure Relief Valve

Mamiko 04152-YZZA1 Oil Filter Kit (3Pcs) and 90430-12031 Oil Drain Plug Gaskets (10 Pcs) Compatible with Toyota Avalon Camry RAV4 Sienna Lexus ES300h ES350 IS200t RX350 RX450h Replacement

  • The Pressure Release Valve: Oil filters clog when exposed to excess contaminants. This clogging can restrict the flow of oil to the engine causing severe damage. The Pressure Relief Valve of a Genuine Toyota Oil Filter opens only when the filter is clogged allowing oil to flow to the engine. The valve on some non-genuine Toyota oil filters open at lower pressures, allowing unfiltered oil to the engine even when the filter is not clogged..
  • The Filter Element: The Toyota approved element effectively filters contaminants while meeting all Toyota Parts specifications for oil flow. By comparison, a lesser quality element may clog over time, which could lead to engine seizure or other potential engine problems. Some non-genuine Toyota oil filters do not meet Toyota’s stringent specifications..
  • The Anti-Drainback Valve: Genuine Toyota Oil Filters feature an Anti-Drainback Valve that prevents oil from draining out of the engine and into the oil pan. This helps protect your engine from increased wear during cold-starts..
Check Stock

The ROP Shop | 2400 PSI Power Pressure Washer Water Pump for Excell & Devilbiss VR2400, VR2500

  • The ROP Shop replacement 2400 PSI Power Pressure Washer Water Pump for Excell & Devilbiss VR2400, VR2500.
  • Specs - Maximum Pressure: 2400 PSI. Maximum Flow: 2.4 GPM. Maximum Pump Speed: 3400 RPM. Shaft Diameter: 7/8". 3 Bolt Pattern: 7 11/16” x 6 3/16” x 6 7/16” & 4" Center to Each Outer Hole. Maximum Water Temperature: 140° F. Inlet Connection Type: Standard Garden Hose. Outlet Tube Connection: 22mm Male. Refer to images 2 and 3 for more information.
  • Includes - (1) Vertical Pressure Washer Pump with Chemical Injector, Unloader Valve, Thermal Release Valve & Outlet Tube (come installed).
  • This pump is for vertical gas engine driven units. In some instances, the pump may need to be removed to change engine oil. The mounting flange provides a convenient connection to most 7/8” diameter shaft vertical gas engines in 4.5-7 HP. The pump has a hole in the leg for draining the engine oil. The pump includes a built-in pressure control valve, downstream chemical injection system and thermal relief valve.
Check Stock

EVIL ENERGY 10AN Baffled Oil Catch Can,Oil Breather Tank with Valve,750ML Universal Aluminum Black

  • [Size] Breather catch can volume:750ML,The Fittings thread size of 10an is 7/8-14 UNF,Bottom pressure relief valve thread is 3/8 NPT..
  • [Universal]It can be applied to most cars, making sure there's enough room for Installation..
  • [Drain Valve] A drain valve at the bottom of the oil catch can makes it easier to clean and reuse..
  • [Function]Separates oil particles from PCV/CCV air to prevent intake valve gunk accumulation, keep engine clean, 10AN oil catch can keep your engine....
  • [Warranty] EVIL ENERGY provide this product 3-month warranty.Any problem you might have,please feel free to contact us via Amazon message..
Check Stock

JIFETOR Oil Pressure Gauge Tester Kit Engine Transmission Fluid Test Tool Set 12PCS, 500psi Automotive Mechanical Automatic Gearbox Line Pressure Meter for Car Truck Motorcycle ATV

  • ENGINE AND TRANSMISSION OIL PRESSURE TEST AND DIAGNOSTIC: This oil pressure tester kit is used for measuring oil pressure on lubrication system quickly and accurately. The oil pressure gauge readings assist to diagnose if there are following problems: blocking oil strainer or oil filter, broken pressure-limiting valve spring, poorly working oil pump, low/high oil viscosity, blocking lubrication oil channel, blocking oil filter core and by-pass valve is difficult to open etc..
  • EASY TO CHECK ENGINE OIL PRESSURE: Remove low oil pressure switch, attach the engine pressure tester with appropriate adapter, start engine to read the pressure on the gauge. Verify vehicle oil pressure is normal or not against manufacturer's recommended readings. Turn off the engine and remove the engine oil pressure tester, replace the low oil pressure switch, then done..
  • FITMENT TYPE: The transmission pressure gauge kit includes 12PCS selectable brass connectors (include the one on hose), very sturdy and durability. These connectors can be connected to the corresponding sizes oil pressure test service port, on most vehicles with gasoline or diesel engine, includes car, motorcycle, ATV, truck and so on..
  • PRESSURE GAUGE AND HOSE: Transmission pressure gauge adopts rubber cover pro....
Check Stock

Engine Oil Pump

  • Melling has added this oil pump that address oiling issues frequently found in Ford 4-valve engines. The M360HV high volume oil pump provides 20% additional oil flow to assist in increasing the engines oil pressure by filling the additional clearances created by wear. As a result the pumps exceed original equipment manufacturers specifications to meet the demanding lubrication needs of those engines..
  • The pump has been designed by Melling engineering as drop-in replacement to the original equipment oil pump. No modifications to the engine, pickup tube assembly or other components are required. All the features that make our stock replacement M360 oil pumps perform so well have been utilized in the new high volume pumps this includes the coated cast iron cover plates..
  • In comparison the M360HV is a 20% higher volume version of the M360 stock replacement oil pump. In addition, the M360HV pumps have a 20 psi higher pressure relief setting/.
  • Every pump is performance tested after it is machined, cleaned, and assembled at our Jackson, MI facility. Melling is global supplier of engine parts and is ISO/TS 16949 and ISO 14001 certified..
Check Stock

JIFETOR Fuel Injection Pump Pressure Test Gauge Set, Automotive Gas Gasoline Fuel Oil Injector Tester Tool Kit 0-140PSI, with Schrader Adapters Universal Compatible with Ford Auto Car Truck Motorcycle

  • FUEL PRESSURE GAUGE TESTER: Automotive fuel injector tester tests if the fuel supply & injection system work normally, help to judge if there are broken internal components or faulty oil lines. Specific tool for fuel system detecting and troubleshooting. Fuel pressure gauge kit suits a variety of gasoline engines on car, truck, SUV, Motorcycle, ATV, RV, etc (Bosch, CIS Jetronic, Throttle Body System on GM vehicles excluded), not for diesel high pressure injection pump or direct-injection engine.
  • UPGRADED FUEL PRESSURE GAUGE TOOL KIT: The set is equipped with various fittings and hoses to connect for testing. 15"L hose is used for hooking up directly to the 1/4" SAE standard Schrader valve on fuel pump, 5-1/2"L hose for small Schrader valve (compatible with some Ford), and 8"L hose for M6 fuel pressure test port, and there are also M8/M10/M12/M14 adapters for the corresponding test port on fuel rail. The aluminum tee can splice in-line between the fuel pump and engine for most vehicles.
  • 140PSI/10BAR PRECISION-MACHINED FUEL PUMP TESTER GAUGE: You just need to ensure there is an adapter in the kit suitable for your test port or the inline connection is workable for your car. Pressure gauge adopts rubber cover protected 3-1/2" large dial and dual color cod....
Check Stock

Duromax XP3100PWT 2.5 GPM Gas Powered Cold Water Power Pressure Washer, 3100 PSI

  • Powerful DuroMax 7 HP Engine with Low Oil Shutdown. Oil Capacity-0.6L. Fuel Tank Size-0.79 Gallons. Thermal Relief Valve-140º Farenheit.
  • Quick Change Connectors make installing the hose a snap, 6 Quick Connect Nozzles includes: 0, 15, 25 and 40 degree, soap applicator and Turbo Nozzle.
  • Convenient on-board storage for spray gun, high pressure hose and nozzles.
  • Pressure Output: 3100 PSI Gallons Per Minute: 2.5, 3-Piston Axial Cam Brass Head Pump.
  • Durable welded frame protects the engine and pump, making it easy to lift, Cushion grip and easy to pull trigger reduce fatigue and improve comfort.
Check Stock

Kohler 52 050 02-S Engine Oil Filter Extra Capacity for CH11 - CH15, CV11 - CV22, M18 - M20, MV16 - MV20 and K582, 2 Pack

  • ...replacement engine oil filter for your Kohler engine, this part fits the following Kohler engine models: CH11-CH25, CV11-CV22, M18-M20, MV16-MV20 and K582..
  • FILTER SPECIFICATIONS: This oil filter 2-pack measures 8.54 x 3.66 x 3.27 inches and weighs 0.95 pounds. Thread 3/4"-16 OD 3" Height 3 7/16" Micron 29. 8-11 psi pressure relief valve anti-drain valve..
Check Stock

PPE Race Fuel Valve for 2004.5-2010 Duramax LLY/LBZ/LMM 113073000 with PPE Viton O-Ring Upgrade for PPE Race Fuel Valve

  • The PPE Race Fuel Valve (heat treated stainless steel construction) replaces stock or a shimmed pressure relief valve..
  • This valve helps maintain fuel rail pressure during high engine load conditions by completely blocking the pressure relief port (effectively eliminating fuel return to the fuel tank). It eliminates potential low fuel rail pressure DTC codes P1093 or P0087 (low fuel rail pressure during power enrichment) that are caused by insufficient PRV spring pressure..
  • Kit Includes PPE Viton O-Ring 1137073001.
Check Stock

JIFETOR Oil Pressure Tester Kit, Professional Engine Diagnostic Test, 100PSI Pressure Gauge Tool with Hose Adapter for Truck Car ATV

  • OIL PRESSURE TEST AND DIAGNOSTIC: JIFETOR engine oil pressure tester kit is used for measuring oil pressure on lubrication system quickly and accurately. The gauge readings assist to diagnose if there are following problems: blocking oil strainer or oil filter, broken pressure-limiting valve spring, poorly working oil pump, low/high oil viscosity, blocking lubrication oil channel, blocking oil filter core and by-pass valve is difficult to open etc..
  • FITMENT TYPE: The oil pressure test tool includes 3 sizes (1/8" NPT, 1/4" NPT, 3/8" NPT) selectable brass adapters, can be connected to the corresponding sizes oil pressure test service port, on most gasoline or small diesel engine, includes car, motorcycle, ATV, truck and so on, which oil pressure not exceeds 100psi..
  • PRESSURE GAUGE AND HOSE: Pressure gauge adopts rubber cover protected 3" large dial. 0-100psi and 0-7bar small scale range with big dial, very easy to read. No pressure holding function, return to zero automatically. The 30" long rubber nylon resin hose, is equipped with a 1/8" NPT brass adapter, can be connected to 1/4" NPT and 3/8" NPT adapters directly. Max working pressure: 300psi.
  • EASY TO OPERATE: When you want to test the oil pressure by this engine oil pressure diagnostic gauge, disasse....
Check Stock

Fuel Filter

  • Helps protect against engine wear by screening out abrasives, such as carbon, sand, dust and bits of metal before they can get into your oil.
  • Pressure-relief valves help minimize the chance of contaminated oil circulating back into the engine.
  • Pressure-relief valves also help maintain the supply of oil to the engine under extreme cold conditions or if the filter gets clogged.
  • Steel cases are “ironed” for a precise fit, fluted to ease removal and painted to resist rust.
  • Efficient filter media offers increased dirt-collecting capability and ability to capture more engine-harming particles.
Check Stock

The Oil Filter Guide

  • Helps protect against engine wear by screening out abrasives, such as carbon, sand, dust and bits of metal before they can get into your oil.
  • Pressure-relief valves help minimize the chance of contaminated oil circulating back into the engine.
  • Pressure-relief valves also help maintain the supply of oil to the engine under extreme cold conditions or if the filter gets clogged.
  • Steel cases are “ironed” for a precise fit, fluted to ease removal and painted to resist rust.
  • Efficient filter media offers increased dirt-collecting capability and ability to capture more engine-harming particles.
Check Stock

Motorcraft FL-500S Oil Filter

  • Helps protect against engine wear by screening out abrasives, such as carbon, sand, dust and bits of metal before they can get into your oil.
  • Pressure-relief valves help minimize the chance of contaminated oil circulating back into the engine.
  • Pressure-relief valves also help maintain the supply of oil to the engine under extreme cold conditions or if the filter gets clogged.
  • Steel cases are “ironed” for a precise fit, fluted to ease removal and painted to resist rust.
  • Efficient filter media offers increased dirt-collecting capability and ability to capture more engine-harming particles.
Check Stock