Categories

Best Engine Oil Pump Intermediate Shaft

Cloyes S853 Balance Shaft Sprocket

  • THIS IS BRAND NEW: DNJ® Intermediate Bearing Set.
  • FITS: 94-04 Toyota / Tacoma, 4Runner, T100 2.7L L4 DOHC Naturally Aspirated 3RZ-FE.
  • FITMENT NOTES: One Set Services Complete Engine, Intermediate Shaft Set.
  • DNJ Engine Components is a full line provider of Domestic & Japanese engine parts for cars and trucks..
  • We carefully selected DNJ Engine Components as the sole provider. DNJ has a 30+ year track record of quality, experience, and trust. It makes sense for us to carry a brand that would help us earn customer loyalty in the long run.
Check Stock

Engine Balance Shaft Seal Compatible With Audi

  • THIS IS BRAND NEW: DNJ® Intermediate Bearing Set.
  • FITS: 83-06 Mitsubishi, Chrysler, Dodge, Hyundai 1.6L-2.4L L4 DOHC, SOHC Turbocharged, Naturally Aspirated 4G64,-.
  • FITMENT NOTES: One Set Services Complete Engine, Intermediate Shaft Set, VIN V.
  • DNJ Engine Components is a full line provider of Domestic & Japanese engine parts for cars and trucks..
  • We carefully selected DNJ Engine Components as the sole provider. DNJ has a 30+ year track record of quality, experience, and trust. It makes sense for us to carry a brand that would help us earn customer loyalty in the long run.
Check Stock

TOOLCY 3/4" Shaft Horizontal Pressure Washer Pump - Max 3100 PSI @ 2.5 GPM - Power Washer Pump for Gas Washer - Replacement Pump for Honda, Simpson, Ryobi etc.

  • ...UMP】 Horizontal Power Washer Pump 3/4" Shaft MAX 3100 PSI / 2.5 GPM / @3400 RPM, Our replacement pump operation time is 150 hours, (50 hours longer than the market), so that you can save money for replace pressure washer accessories and time.Top performance at 2600-3100 PSI and fit most 208-240cc 6.0HP-8.0HP engine. Replacement for Simpson, Generac, Homelite, Honda, Karcher and more..
  • 【EFFICIENT WORK】Come with 3 special test matched nozzle tips (0°/25°/soap) for best cleaning performance.If you need a higher pressure cleaning pump, it is equipped with a larger 3100 PSI / 2.5 GPM flow rate to complete the cleaning job more efficiently, allowing you to easily start cleaning in more scenarios (eg. garden, house, car, road etc). ⚠ Will not fit 7/8 inch shaft gas engine..
  • 【SAVE WORRY】 It is made of die cast aluminum with deep surface treatment to prevent rust, the pump is maintenance-free crankcase, so there is no need for a lifetime of pre-filling gear oil, no oil change. Simply Replace it and Revive your Pressure Washer! We long for help you save more energy and time, this upgraded pressure pump will be your best choice.※►Diagonal distance betwee....
Check Stock

Comet ZWD 4040G Pressure Washer Pump 4 GPM 4000 PSI For 1\ Hollow Shaft Engines (Fully Plumbed with Unloader External Bypass)

  • 2800 psi 2.5 gpm Universal Power Pressure Washer Water Pump 308653052 for Homelite.
  • Specs - Maximum Pressure: 2800 PSI. Maximum Flow: 2.3 GPM. Maximum Pump Speed: 3400 RPM. Shaft Diameter: 7/8" Shaft. 3 Bolt Pattern: 7 11/16” x 6 3/16” x 6 7/16” & 4" Center to Each Outer Hole. Maximum Water Temperature: 140° F. Inlet Connection Type: Standard Garden Hose. Outlet Tube Connection: 22mm Male. Refer to images 2 and 3 for more information.
  • Includes - (1) Vertical Pressure Washer Pump with Chemical Injector, Unloader Valve, Thermal Release Valve & Outlet Tube.
  • This pump mounts vertical and is a rear facing (water inlets/outlets come out of the rear of the engine). Pump needs at least 5.5HP to handle PSI. Pump head can be flipped.
  • This pump may require 1/2" spacers when installed, depending on motor configuration. Spacers are used in the case that the pump arm(s) hits the engine or can't reach the under side of frame such as the engine has a longer shaft. If spacers aren't used when installing, the pump legs will break from stress.
Check Stock

Pressure Washer Pump Replacement, 7/8'' Shaft Vertical Pressure Washer Pump, Power Washer Pumps Replacement, 2400-2800PSI Pumps Replacement for Pump Pressure Power Washer

  • · Pressure Washer Pump - 2800psi, Max 2.5 GPM RATING, Fits 7/8" Shaft Vertical Axial Gasoline Engines in 4-7 HP - Such as some models of Troybilt, Ryobi, Generac, Briggs & Stratton,Devilbiss/Excell,Craftsman,Husky,Honda. Not fit all model series. Very Important - This pump is a heavy item. In order to save each other’s time and money, Please check the pump shaft size 7/8’’, the pump housing and mounting size, and the pressure power fit your machine or not before you place the order..
  • · Vertical Power Pressure Pumps COMPATIBILITY - 2400-2800psi,4-7 HP Max.#PowerStroke:PS262311,PS80944,PS80946#Excell:VR2522,VR2500,#Craftsman:580series#Ryobi:RY802700,RY8C2700,RY802700A,etc #Husky: HU80 series #Homelite UT80709 series.It can fit other type models. This pump not fit all series models, pls check your pressure washer’s mounting size, pressure power and shaft size before you buy. If you are not sure if your pressure washer would fit, please contact ' Amazon Customer Service'..
  • · Pressure Washer Pump Parts - Comes with Easy start valve (EZ), Thermal relief valve, Unloader & SAE gas engine flange, M22 outlet, Copper Nut 3/4 NH inlet, Keyway Stock..
  • · Universal Pressure Washer Pump Replacement✦This pump is a universal pressure washer pump replac....
Check Stock

PEGGAS New - Premium - Cold Water - Gasoline - Pressure Washer - Power Washer - Replacement - Axial Horizontal Pump 3/4“ Shaft - 2600-2700 PSI 2.3 GPM Aluminum Head -Simpson -Briggs & Stratton- Ryobi

  • ...re even for washing your car or other things without being afraid to damage the paint!.
  • ✦ UNIVERSAL FITMENT ✦ This pump comes with a standard 3/4” shaft which is universal for all small pressure washers. Hose connecters are standard M22 so you don’t have to worry about buying extra fittings. Your 5.5-6.5 HP engine will power this pump with no problem and bolt on directly!.
  • ✦ MOUNTING BOLT MEASUREMENT ✦ Hole Distance to hole – 2 5/8” Outer Holes – 1 7/8″.
  • ✦ PARTS COMPATIBILITY ✦ ✦ THIS PUMP WILL ONLY FIT A HORIZONTAL ENGINE, NOT A 7/8″ SHAFT & NOT VERTICAL ENGINE ✦ Models stated in the listing are potential matches only and NOT a guarantee of compatibility. The customer is responsible for verifying their compatibility (our pump with their machines)*** Fits Honda Excell units with 3/4″ shaft only!!! Some Excell units have the 7/8″ shaft and this pump will not work!**.
Check Stock

YAMATIC Horizontal Pressure Washer Pump 3/4\ Shaft - Max 3300 PSI @ 2.5 GPM - Original Engineering for Most Brand gas engine power washer

  • PERFORMANCE and DURABILITY upgrade - Industry engineering process designed for residential powerful pressure washer cleaning job, longest real 120 hours endurance test than similar residential pump. Improved 3000 PSI X 2.5 GPM performance make your cleaning job more powerful for multiple work, like house, fences, sidewalks, vehicles, pool etc..
  • OEM EXTENDED TECHNOLOGY - Based on voice of our millions customers and our original equipment manufacture technology, we process this top level pump that impossible be outdone by so-called Replacemnet Pump. Made in USA key parts and our OEM background is much higher technology, of couse more safe and more durable than similar replacement pump..
  • FIT for WHO - USA Standard Mounting design, this pump could fit most brand gas power washers come with the small gas engine from 180 to 225 cc (Equival 6.0 to 8 hp engine). Please Note only fit a 3/4" Shaft Horizontal pressure washer pump..
  • EASY START EASY JOB - Pre-filled gasoline for lifetime and no need to change oil. Easy set up as video show. Also Easy-Start structure with light recoil start. Make power washer more powerful and more easy. Recommend to drain out water inside pump and use Briggs Stratton and SIMPSON pump guard before long time storage..
Check Stock

The Bundling Off L116T Light and 2m ac Adapter

  • 2800 psi 2.5 gpm Universal Power Pressure Washer Water Pump 308653052 for Homelite.
  • Specs - Maximum Pressure: 2800 PSI. Maximum Flow: 2.3 GPM. Maximum Pump Speed: 3400 RPM. Shaft Diameter: 7/8" Shaft. 3 Bolt Pattern: 7 11/16” x 6....
  • Includes - (1) Vertical Pressure Washer Pump with Chemical Injector, Unloader Valve, Thermal Release Valve & Outlet Tube.
  • This pump mounts vertical and is a rear facing (water inlets/outlets come out of the rear of the engine). Pump needs at least 5.5HP to handle PSI.....
  • This pump may require 1/2" spacers when installed, depending on motor configuration. Spacers are used in the case that the pump arm(s) hits the engine....
Check Stock

HGV Tools / Compatible with John Deere Timing PIN alt JDG1559

  • Before installing injection pump on engine, install JDG1559 injection Pump Timing Pin into pump , timing pin bore..
  • nstall a small punch or screwdriver into hole in pump drive shaft and turn shaft until timing pin drops into recess in injection pump drive shaft.
  • Use for static lock pin timing during installation of the injection pump..
Check Stock

DRIVESTAR M383 Engine Oil Pump 1996-2000 for Honda Civic,1996-1997 Civic del Sol 1.6L

  • Fitment:Oil Pump for Honda Civic 1996 1997 1998 1999 2000 1.6L.
  • Replacement Oil Pump Number:M383,MA-371 oil pump.
  • Deliver Oil:The oil pump can deliver a fixed quantity of pressurized oil to the engine, and keep it running smoothly. Which mean that your engine could always get the right amount of oil pressure, and the critical engine parts wouldn’t be rub together, or cause extensive and damage.
  • Strict Ex-Factory Testing:All products are manufactured in accordance with the international automotive spare parts production specifications, and passed strict testing before leaving the factory to ensure that each product quality is superior.
  • Note:When the certain engine parts don’t get enough oil, the engine may start to make tapping, knocking or rattling noises. Loss of oil pressure can prevent a vehicle from starting. And it’s time for a replacement of your failing oil pump..
Check Stock

4000PSI Pressure Washer Pump Horizontal Shaft 1\ For EB4040HA With Honda Engine

  • 【Reborn Your Pressure Washer】YAMATIC Horizontal Power Washer Pump 3/4" Shaft MAX 3300 PSI / 2.5 GPM / @3400 RPM, Save money by replacing your pump instead of buying a new power washer. Top performance at 2800-3300 PSI and fit most 208-220cc 6.5HP-7.0HP engine. Replacement for Simpson, Generac, Homelite, Honda, Karcher and more. ※►Diagonal distance between screw holes is 3 5/8''. ►Hole Distance to hole is 2 9/16''. ►Key width 3/16''. ►Depth 2 5/8''. ⚠ Will not fit 7/8 inch shaft as engine..
  • 【Extended Durability】 High-performance double seal system prevents leakage, upgraded technical surfacing piston and bearing, It is manufactured from fully anodized die-cast aluminum for protection against rust, get 200 hrs running time, longer than OEM power washer pump. And the thermal relief valve (TRV) protects the pump from overheating while in bypass mode. ⚠NOTE: Will not fit 7/8 inch shaft as engine. If you're not sure fit or not, just message us and we will confirm it for you!.
  • 【Maintenance-Free】This pump features a maintenance-free crankcase so you never have to change the gasoline. This easy-to-install kit is great for power washers that can support 3300 PSI at 2.5 GPM to wash walls, fences, sidewalks, vehicles, and more..
Check Stock

150cc 4-Stroke GY6 Single CylinderMotor Long Case Engine for Scooter ATV Go Kart Engine CVT Auto Clutch Motor Bike with Kick Start Lever Carburetor CDI Starter Solenoid Coil

  • 【Features】Engine Type: GY6 Single Cylinder 4-Stroke. Engine oil type: SF15W-40 not come with oil. Cooling: Air Cooled .Displacement: 150cc.
  • 【High-flow Oil Pump】Reduces the wear of friction pairs and prolongs the engine service life..
  • 【Crank Shaft】 The engine is low speed with high torque and has large diameter bearings for crankshaft connecting rod, increasing the reliability of the bearings..
  • 【CVT】CVT consist mainly of 2 transmission pulleys and 2 transmission belts. It’s compact, simple design offers seamless shifting between an unlimited amount of varying gear ratios, allowing a smooth rate of acceleration.
  • 【NOTE】 Installation Manual Is NOT Included Professional Installation Is Highly Recommended.
Check Stock

M295 Standard Volume Oil Pump - Compatible with 4.8L, 5.3L, 6.0L Chevy Silverado, Suburban, Tahoe, Trailblazer, GMC Sierra, Yukon, Cadillac Escalade - Replace M295, 12696357, 12586665

  • M295 STANDARD VOLUME OIL PUMP - A mechanical device that circulates oil to the bearings, camshaft and pistons of an engine. A failed oil pump will cause low oil pressure, engine overheat, and unusually noise from the engin. If you notice any of the symptoms, you will need to have your oil replaced..
  • FIT THE FOLLOWING VEHICLES - Standard volume & standard pressure oil pump compatible with 4.8L 5.3L 5.7L 6.0L GM Vortec V8 engine oil pump, induding Chevrolet Silverado, Suburban, Tahoe, Avalanche, Camaro, Express, Trailblazer, GMC Sierra, Yukon, Savana, Envoy, Cadillac Escalade, Buick Rainier, model year 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020..
  • REPLACE PART NUMBER - Replace GM 12696357, 12586665 oil pump, replace Melling M295 oil pump. Commonly found on Chevrolet Silverado, Suburban, Tahoe, Avalanche, Camaro, Express, Trailblazer, GMC Sierra, Yukon, Savana, Envoy, Cadillac Escalade, Buick Rainier with 4.8 5.3 5.7 6.0 V8 Vortec Engine..
  • OEM DESIGN & DIRECT FIT - Quality materials & advanced technology used, meets or exceeds OEM standards. Even though this is not a genuine GM or Melling oil pump, but it works even better and lasts longer. Save yourself times and money ....
Check Stock