Rust Bucket Outline Rat Rod Hot Rod Diesel T-Shirt

  • Application Models: Compatible with Chery QQ Joyner Trooper Gs-Moon Jeep Buggy John Deere UTV Kawasaki ATV 2014-2023 Arctic Cat Prowler Pro Ranch Crew Textron Oreion Reeper and Tracker 800 SX Crew.
  • Compatible with John Deere 825i 835E 835M 835R Gator Utility Vehicles Kawasaki Mule Pro-FX/Pro-FXTs (16-17) ATV ROV.
  • Detailed Components: 1X SQR372 Engine Motor Assembly with Manifold Gasket Set.
  • Features: This engine is OEM Genuine made by Chery, fully tesed before shipped, if you are using John Deere gators, you may meet difference of oil pan and pickup tube, you can rebuild them or use the old, thanks.
Check Stock

DNJ EK900MHD Master Engine Rebuild Kit for 1985-1995 / Toyota / 4Runner, Celica, Pickup / 2.4L / SOHC / L4 / 8V / 2366cc / 22R, 22RE, 22REC

  • THIS KIT INCLUDES: Piston Set, Piston Ring Set, Main Bearings Set, Rod Bearings Set, Full Gasket/Sealing Set, Thrust Washer, Freeze Plug Set (Brass), Timing Chain Kit, Oil Pump, Piston Pin Bushings, Timing Cover (Front Cover).
  • FITS: 85-95 Toyota / 4Runner, Pickup, Celica 2.4L L4 SOHC Naturally Aspirated 22RE,22R,22REC.
  • FITMENT NOTES: w/ Oil Pump & Timing Belt Or Timing Kit If Applicable, Master Kit, w/ Heavy Duty Timing Kit.
  • You are assured to receive a worldwide proven Engine Rebuild Kit quality part with OE quality fit and performance..
  • IMPORTANT: This Engine Kit is in STANDARD SIZE in all of its components. If you need oversized Pistons, Piston Rings, Rod Bearings or Main Bearings, send us a message prior ordering, indicating the correct size you need, so our customer service team can confirm availability. If we do not receive communication from you, everything will be sent in STANDARD SIZE by default.
Check Stock

NEW WEIAND OIL PAN KIT,7 QUARTS,GOLD ZINC,8.25" DEPTH,DRAG RACING,COMPATIBLE WITH 1958-1979 SMALL BLOCK CHEV.

  • Brand New Weiand Drag Racing Oil Pan Kit, 7 Quarts, Gold Zinc Finish, Fits 1958-1979 Small Block Chevy Engines, Produced By Holley (Holley Part #5001WND).
  • Fits: 1958-1979 Small Block Chevy | Includes: Application specific oil pan | Oil pan gasket | Oil pump pickup | Pan mounting bolt kit.
  • Features: Trap door baffles keep oil under control during hard acceleration | Increased oil capacity to keep high performance engine oil systems fed properly.
  • Specs: Application: 1958-1979 Small Block Chevy | Brand: Weiand | Crank Scraper Included: No | Dipstick Location: Driver | Emission Code: 5 | Finish: Gold Zinc | Material: Stamped Steel | Oil Pan Capacity: 7 Quarts | Oil Pan Depth: 8.25" | Oil Pan Type: Fabricated | Product Type: Oil Pan Kit | Sump Location: Rear | Windage Tray Included: No.
  • NOTE: Kit designed to work with standard volume oil pumps..
Check Stock

12v 80w Electric Oil Change Transfer Pump Extractor Kits for Boat/Car/Lawn Mower Marine/Jet Ski/Truck/RV/ATV Changing Diesel Fluid Scavenge Suction

  • 80w OIL CHANGE EXTRACTOR - The engine oil transfer pump is 80w. Extracting motor oil from vehicles quickly and cleanly. It can be used for changing oil 3L/min. Not compatible with water and petrol, gasoline, kerosene..
  • EASY ENGINE OIL CHANGE - The 12v oil extractor pump comes with 2 extractor tubes, easy for a top down oil change by single ON/OFF switch controll. Pumps oil out throw dip stick, no need to lay under the machines or vehicles. The oil will simply draw out the motor through the oil dipstick bore..
  • MULTIFUNCTIONAL OIL EXTRACTOR PUMP - The oil change pump kit fits for Car, Boat, Jet ski, Motorcycle, Scooter, Marine, Quad Bike, Truck, Forklift, Generator, Tractor, Riding Mower, Snowmower, etc, siphoning & transfering diesel, oil to other Cars, Trucks, Ships, Boats, Tractors, Farm Machinery, Plant Equipment Etc..
  • PORTABLE OIL PUMP CHANGE EXTRACTOR - The oil transfer pump is mini but powerful. With 5ft Outlet tube & 4ft Inlet tube, the 8.2ft long battery clamps makes the extractor pump kit possible for being used at large range. The 2 hoops are used to tighten the tubes to avoid oil spilling..
  • FOR DIFFERENTIAL FLUID TRANSMISSION - This high efficient self-priming oil extractor pump is easy to pump various fluids and oils. Place the inlet/outlet ho....
Check Stock

WEIAND FABRICATED OIL PAN KIT,7 QUARTS,GOLD ZINC FINISH,9" DEPTH,REAR SUMP,DRAG RACING,COMPATIBLE WITH 1979-1993 FORD MUSTANG 351W CONVERSION

  • ...een underneath. Weiand aluminum oil pans helped them get down the strip with 7-quart oil capacity and fins to keep them cool!.
  • Times and styles have changed, but Weiand is back and proud to announce their latest release of fabricated oil pan kits for Big Block Chevy, GM LS-engines, Small Block Ford & Mopar B/RB engine applications!.
  • Features: Oil Pan Kit comes complete with the following: application specific oil pan, oil pan gasket, oil pump pickup and pan mounting bolt kit | Trap door baffles keep oil under control during hard acceleration | Increased oil capacity to keep high perfomance engine oil systems fed properly | Gold Zinc Finish | Popular applications for drag race applications.
  • Specs: Application: 1979-1993 Mustang 351W | Brand: Weiand | Crank Scraper Included: No | Dipstick Location: None | Emission Code: 5 | Finish: Gold Zinc Finish | Material: Stamped Steel | Oil Pan Capacity: 7.0 Quarts | Oil Pan Depth: 9.00" | Oil Pan Type: Fabricated | Product Type: Oil Pan Kit | Sump Location: Rear | Windage Tray Included: No.
Check Stock

MAHLE Original 41940.030 Ford 6.0L Power Stroke & Navistar VT275/365 & MaxxForce 5 0.030\ Piston Ring Set, 8 Pack

  • THIS KIT INCLUDES: Piston Set, Piston Ring Set, Main Bearings Set, Rod Bearings Set, Head Gasket Set, Lower Gasket Set, Freeze Plug Set (Brass), Cam Bearings, Timing Chain Kit, Oil Pump.
  • FITS: 87-90 Cadillac, Chevrolet, Pontiac / Brougham, Camaro, Caprice, Firebird 5.7L V8 OHV Naturally Aspirated.
  • FITMENT NOTES: w/ Oil Pump & Timing Belt Or Timing Kit If Applicable, Dish Pistons, Master Kit, w/ 3/4 Inlet Pump, w/ 3/4 Inlet, w/o IG3173, w/ Oil Pump & Timing Belt Or Timing Kit If Applica.
  • You are assured to receive a worldwide proven Master Engine Rebuild Kit quality part with OE quality fit and performance..
  • IMPORTANT: This Engine Kit is in STANDARD SIZE in all of its components. If you need oversized Pistons, Piston Rings, Rod Bearings or Main Bearings, send us a message prior ordering, indicating the correct size you need, so our customer service team can confirm availability. If we do not receive communication from you, everything will be sent in STANDARD SIZE by default.
Check Stock

Vevitts 80w Oil Change Extractor Pump 12V Oil Extractor Pump for Changing Diesel Fluid Scavenge Suction Oil Transfer Pump Kits for Jet Ski, Truck, RV, ATV, Boat (Red)

  • 【Instructions for use】1. Please pay attention to the direction of the inlet and outlet, the positive and negative poles and the locking hose lock before use.
  • 2. Please start the vehicle and heat the engine oil to 40-60 degrees for about 5 minutes, otherwise, the oil change pump may have low suction or get stuck. 3. CAN NOT be used to extract water, gear oil (too viscous) or flammable liquid (fuel, gasoline,kerosene,etc.)..
  • 【Complete Diesel Change Pump Kit】The oil transfer pump is mini but powerful. With 4.6ft Outlet tube & 4ft Inlet tube, the 8.2ft long battery clamps makes the extractor pump kit possible for being used at large range. The 2 hoops are used to tighten the tubes to avoid oil spilling..
  • 【12V 80w Oil Extractor Pump】Oil change pump, a great helper for quick and clean oil changing and transfer, all parameter is verified by multiple test. Diesel Flow Rate: 3.5L/min, Engine Oil Flow Rate(40-60℃): 1L/min, Inlet Tube Length: 1.2m/47.2in, Outlet Tube Length: 1.4m/55.1in, Voltage: 12V, Maximum current: 5A..
  • 【Premium Quality】We use pure copper for motors.Good conductivity, corrosion resistance and rust resistance, effectively avoid leakage or short circuit. Instead of manual operation, it can help you change oil quickly and cleanly....
Check Stock

Z Whip LS Oil Pump Pickup Tube Girdle Pipe Hold Down Brace Support Billet Bracket MADE IN THE USA Compatible with GM Chevy LS Series Engines LSX LS1 LS3 LS2 LQ4 LS6 LQ9 5.3L 6.0L 6.2L

  • Compatible with all LS Series Engines 1997-2014 (GEN. III/IV small block chevy).
  • The factory oil pickup tube on LS engines is only secured by one bolt. This can potentially lead to a poor seal on the oil pump. Our Billet aluminum Oil pump girdle solves the issue by placing a clamp on both sides of the tube, securely holding it in place..
  • DOES NOT fit any LS oil pickup tube with welded flanges (GM # 12608593, Holley 302-1 and similar tubes). DOES NOT fit pickup tubes with two screw holes on their flange (Holley 302-2 tube and similar tubes)..
  • Proudly made in the USA from Aerospace Grade Billet Aluminum.
  • We are an AS9100D and ISO 9001:2015 Certified Manufacturer. Parts we produce fly at 30,000 feet where failure is not an option..
Check Stock

Engine Oil Pump Pickup Tube Compatible with 2004 2005 2006 LS1/LS2 Pontiac GTO #12572654

  • New GM OEM oil pump pickup tube. This is for GTO oil pans only..
  • Oil pump pickups are specific to the oil pan..
  • If you are swapping an LS motor, you need to order a pickup specific to the pan you are using..
  • 100% Brand New , reliability and durability. Kindly do not hesitate to contact us back in the future if you feel that you need further assistance..
Check Stock

DNJ EK900 Engine Rebuild Kit for 1985-1995 / Toyota / 4Runner, Celica, Pickup / 2.4L / SOHC / L4 / 8V / 2366cc / 22R, 22RE, 22REC

  • THIS KIT INCLUDES: Piston Set, Piston Ring Set, Main Bearings Set, Rod Bearings Set, Full Gasket/Sealing Set, Thrust Washer, Freeze Plug Set (Brass), Piston Pin Bushings.
  • FITS: 85-95 Toyota / 4Runner, Pickup, Celica 2.4L L4 SOHC Naturally Aspirated 22RE,22R,22REC.
  • FITMENT NOTES: w/o Oil Pump & Timing Belt Or Timing Kit.
  • You are assured to receive a worldwide proven Engine Rebuild Kit quality part with OE quality fit and performance..
  • IMPORTANT: This Engine Kit is in STANDARD SIZE in all of its components. If you need oversized Pistons, Piston Rings, Rod Bearings or Main Bearings, send us a message prior ordering, indicating the correct size you need, so our customer service team can confirm availability. If we do not receive communication from you, everything will be sent in STANDARD SIZE by default.
Check Stock

The ROP Shop | 2400 PSI Power Pressure Washer Water Pump for Excell & Devilbiss VR2400, VR2500

  • Includes - (1) Vertical Pressure Washer Pump with Chemical Injector, Unloader Valve, Thermal Release Valve & Outlet Tube (come installed).
  • This pump is for vertical gas engine driven units. In some instances, the pump may need to be removed to change engine oil. The mounting flange provides a convenient connection to most 7/8” diameter shaft vertical gas engines in 4.5-7 HP. The pump has a hole in the leg for draining the engine oil. The pump includes a built-in pressure control valve, downstream chemical injection system and thermal relief valve.
  • This has the outlet facing the front. Some specific pressure washers may require longer bolts and spacers to mount the pump to your engine. These bolts and spacers are NOT included, but may be purchased at your local hardware store. Common bolt sizes: Two - 5/16" 18 x 2 1/2", One - 5/16" 18 x 3 1/2".
Check Stock

Diesel Water Parking Heater Hydronic Heater 5KW 12V Boat Caravan Motorhome Truck Camper Trailer Remote Control Diesel Water Heater Kit

  • PROTECT YOUR ENGINE ➤ The water heating type parking heater uses automobile coolant to exchange heat, preheats the engine and the cab, solves the problem of difficult engine startup at low temperature, greatly reduces air-cooled wear caused by low temperature startup, and extends engine life by more than 30%..
  • LESS FUEL PREHEATING ➤ Compared with cold-start engine preheating, the water heating parking heater preheating consumes less fuel. In the cold winter, you can warm up the engine and cab before getting on the car to drive away the severe cold. Improve the driving environment and no longer need a warm store..
  • FULL INSTALLATION SET ➤ 1 x Water Parking Heater, 1 x Auto Switch And Remote Control (Batteries Not Included), 1 x Water Pump, 1 x Wiring Harness, 1 x Tube, 1 x Oil Pump, 1 x Pump Holder, 1 x Fuel Filter, 1 x Oil Tube, 1 x Big Elbow, 1 x Small Elbow, 1 x Air Inlet Hose, 1 x Exhaust Pipe, 1 x Exhaust Silencer, 1 x Hose Holder, 1 x Cross, 1 x Air Filter, 6 x Short Pipe, 1 x Oil Extractor, 12 x Hose Clamps, 12 x Small Hose Clamp, 5 x Screwiv, 4 x Screw, 1 x Iron Stent..
  • TECHNICAL PARAMETERS ➤ Material: Metal &....
Check Stock

Ruma Carburetor Air Cleaner Air Housing Recoil Starter Kit for Honda GX120 GX160 GX200 Harbor Freight Predator 212cc 173cc Lifan Rato Loncin Engine Power Equipment

  • This kit includes carburetor, air cleaner assembly, recoil starter assembly, on off engine stop switch, spark plug, fuel tube,tube clips fuel joint, gasket set for carburetor, muffler and valve cover,, nuts for carburetor and muffler, bolts for recoil starter. It's a perfect rebuilding kit for your motors. Quality warranty. Full refund if any issue..
  • Fits Honda GX120 GX160 GX200 engine,water pump, pressure washer, compressor and more other equipment with the mentioned engines.
  • Fits Harbor Freight Predator 212CC 173cc 6.5Hp, 7Hp,R210 Lifan, Rato, Loncin engine, cart, pressure washer, water pump, compressor 56174 56172 63079 63080 63089 63090 67561 69676 67560 68121 68120 68527 68528 69727 69729 69730 96838 96898.
  • Harbor Freight Greyhound 196CC 6.5HP LIFAN - 66014 66015.
  • Harbor Freight Central Machinery 96549 96500 94187 and more.
  • Fits Generac 196cc 208cc engine and other equipment.
Check Stock