Best Engine Oil Pump Pickup Tube Screen
Vevitts 80w Oil Change Extractor Pump 12V Oil Extractor Pump for Changing Diesel Fluid Scavenge Suction Oil Transfer Pump Kits for Jet Ski, Truck, RV, ATV, Boat (Red)
- 【Instructions for use】1. Please pay attention to the direction of the inlet and outlet, the positive and negative poles and the locking hose lock before use.
- 2. Please start the vehicle and heat the engine oil to 40-60 degrees for about 5 minutes, otherwise, the oil change pump may have low suction or get stuck. 3. CAN NOT be used to extract water, gear oil (too viscous) or flammable liquid (fuel, gasoline,kerosene,etc.)..
- 【Complete Diesel Change Pump Kit】The oil transfer pump is mini but powerful. With 4.6ft Outlet tube & 4ft Inlet tube, the 8.2ft long battery clamps makes the extractor pump kit possible for being used at large range. The 2 hoops are used to tighten the tubes to avoid oil spilling..
- 【12V 80w Oil Extractor Pump】Oil change pump, a great helper for quick and clean oil changing and transfer, all parameter is verified by multiple test. Diesel Flow Rate: 3.5L/min, Engine Oil Flow Rate(40-60℃): 1L/min, Inlet Tube Length: 1.2m/47.2in, Outlet Tube Length: 1.4m/55.1in, Voltage: 12V, Maximum current: 5A..
- 【Premium Quality】We use pure copper for motors.Good conductivity, corrosion resistance and rust resistance, effectively avoid leakage or short circuit. Instead of manual operation, it can help you change oil quickly and cleanly....
Check StockZ Whip LS Oil Pump Pickup Tube Girdle Pipe Hold Down Brace Support Billet Bracket MADE IN THE USA Compatible with GM Chevy LS Series Engines LSX LS1 LS3 LS2 LQ4 LS6 LQ9 5.3L 6.0L 6.2L
- Compatible with all LS Series Engines 1997-2014 (GEN. III/IV small block chevy).
- The factory oil pickup tube on LS engines is only secured by one bolt. This can potentially lead to a poor seal on the oil pump. Our Billet aluminum Oil pump girdle solves the issue by placing a clamp on both sides of the tube, securely holding it in place..
- DOES NOT fit any LS oil pickup tube with welded flanges (GM # 12608593, Holley 302-1 and similar tubes). DOES NOT fit pickup tubes with two screw holes on their flange (Holley 302-2 tube and similar tubes)..
- Proudly made in the USA from Aerospace Grade Billet Aluminum.
- We are an AS9100D and ISO 9001:2015 Certified Manufacturer. Parts we produce fly at 30,000 feet where failure is not an option..
Check StockEngine Oil Pump Pickup Tube Compatible with 2004 2005 2006 LS1/LS2 Pontiac GTO #12572654
- New GM OEM oil pump pickup tube. This is for GTO oil pans only..
- Oil pump pickups are specific to the oil pan..
- If you are swapping an LS motor, you need to order a pickup specific to the pan you are using..
- 100% Brand New , reliability and durability. Kindly do not hesitate to contact us back in the future if you feel that you need further assistance..
Check StockThe ROP Shop | 2400 PSI Power Pressure Washer Water Pump for Excell & Devilbiss VR2400, VR2500
- Includes - (1) Vertical Pressure Washer Pump with Chemical Injector, Unloader Valve, Thermal Release Valve & Outlet Tube (come installed).
- This pump is for vertical gas engine driven units. In some instances, the pump may need to be removed to change engine oil. The mounting flange provides a convenient connection to most 7/8” diameter shaft vertical gas engines in 4.5-7 HP. The pump has a hole in the leg for draining the engine oil. The pump includes a built-in pressure control valve, downstream chemical injection system and thermal relief valve.
- This has the outlet facing the front. Some specific pressure washers may require longer bolts and spacers to mount the pump to your engine. These bolts and spacers are NOT included, but may be purchased at your local hardware store. Common bolt sizes: Two - 5/16" 18 x 2 1/2", One - 5/16" 18 x 3 1/2".
Check StockDiesel Water Parking Heater Hydronic Heater 5KW 12V Boat Caravan Motorhome Truck Camper Trailer Remote Control Diesel Water Heater Kit
- PROTECT YOUR ENGINE ➤ The water heating type parking heater uses automobile coolant to exchange heat, preheats the engine and the cab, solves the problem of difficult engine startup at low temperature, greatly reduces air-cooled wear caused by low temperature startup, and extends engine life by more than 30%..
- LESS FUEL PREHEATING ➤ Compared with cold-start engine preheating, the water heating parking heater preheating consumes less fuel. In the cold winter, you can warm up the engine and cab before getting on the car to drive away the severe cold. Improve the driving environment and no longer need a warm store..
- FULL INSTALLATION SET ➤ 1 x Water Parking Heater, 1 x Auto Switch And Remote Control (Batteries Not Included), 1 x Water Pump, 1 x Wiring Harness, 1 x Tube, 1 x Oil Pump, 1 x Pump Holder, 1 x Fuel Filter, 1 x Oil Tube, 1 x Big Elbow, 1 x Small Elbow, 1 x Air Inlet Hose, 1 x Exhaust Pipe, 1 x Exhaust Silencer, 1 x Hose Holder, 1 x Cross, 1 x Air Filter, 6 x Short Pipe, 1 x Oil Extractor, 12 x Hose Clamps, 12 x Small Hose Clamp, 5 x Screwiv, 4 x Screw, 1 x Iron Stent..
- TECHNICAL PARAMETERS ➤ Material: Metal &....
Check StockBOYISEN Oil Change Pump Extractor 12v 60W Oil Extractor Pump Diesel Fluid Transfer Scavenge Suction Pump Oil Quick Changer for Car, Boat, Marine, Motorbike, Truck, RV, ATV(Yellow)
- 【Efficient Electric Pump】Oil change pump, a great helper for quick and clean oil changing and transfer, all parameter is verified by multiple test. Diesel Flow Rate: 1.5L/min, Engine Oil Flow Rate(40-60℃): 0.3L/min, Inlet Tube Length: 1.2m/47.2in, Outlet Tube Length: 1.4m/55.1in, Voltage: 12V, maximum current: 5A, maximum power: 60W.
- 【NOTES】A, This oil transfer pump CAN NOT transfer WATER, GASOLINE, PETROL, FUEL or FLAMMABLE LIQUID. B, Please DO NOT misplace the direction of import and export, positive and negative poles and secure the hose clamps. C, Heat up your engine oil to 104°F-140°F before pumping D, We tested oil pump before shipping, there might be little oil stain in the pump, kindly understand. E, To make it last longer, it’s recommended to keep a little oil inside when the extractor pump is not in use..
- 【Premium Quality】The quality of oil change pump extractor varies widely. We are using pure copper for the motor and alligator. Good electrical conductivity, corrosion resistance and rust free, effectively avoid leakage or short circuit. Overheat protection will cut off the power supply automatically for safety.
- 【What You Get】The diesel change pump come with 2 outlet hose, 2 inlet hose, 4 hose locks and 2 battery clips. A....
Check StockBOYISEN Oil Change Pump Extractor 12v 80W Oil Extractor Pump Diesel Fluid Transfer Scavenge Suction Pump Oil Quick Changer for Car, Boat, Marine, Motorbike, Truck, RV, ATV(Orange)
- 【Efficient Electric Pump】Oil change pump, a great helper for quick and clean oil changing and transfer, all parameter is verified by multiple test. Diesel Flow Rate: 1.5L/min, Engine Oil Flow Rate(40-60℃): 0.3L/min, Inlet Tube Length: 1.2m/47.2in, Outlet Tube Length: 1.4m/55.1in, Voltage: 12V, maximum current: 7A, maximum power: 80W.
- 【NOTES】A, This oil transfer pump CAN NOT transfer WATER, GASOLINE, PETROL, FUEL or FLAMMABLE LIQUID. B, Please DO NOT misplace the direction of import and export, positive and negative poles and secure the hose clamps. C, Heat up your engine oil to 104°F-140°F before pumping. D, We tested oil pump before shipping, there might be little oil stain in the pump, kindly understand. E, To make it last longer, it’s recommended to keep a little oil inside when the extractor pump is not in use.
- 【Premium Quality】The quality of oil change pump extractor varies widely. We are using pure copper for the motor and alligator. Good electrical conductivity, corrosion resistance and rust free, effectively avoid leakage or short circuit.
- 【What You Get】The diesel change pump come with 2 outlet hose, 2 inlet hose, 4 hose locks and 2 battery clips. The hose clip enable to thoroughly seal the connection and prevent leaking. A....
Check StockAluminum 15 to 55 Gallon Drum Pump Rotary Hand Liquid Transfer Heavy Duty Rotary Barrel Pump Hand Drum Pump for Kerosene Gasoline Oil Fuel Diesel Hydraulic Fluid
- ...ity Aluminum: Our drum pump is made of high-quality all aluminum material, which is highly anti-corrosion and anti-rust, durable and lasts longer. Our 55 gallon drum pump supports clockwise transfer handle instead of counterclockwise transfer handle..
- Applicable Type of Oil: Extractable liquid: Diesel oil, kerosene, engine oil, hydraulic oil, Gear oil, edible oil (but not edible grade). Liquids that cannot be extracted: Gasoline, water, urea, acid-base liquid, corrosive liquid, chemical liquid, edible liquid, etc. cannot be extracted..
- Great Filter: Our hand liquid transfer drum pump distribution has a fine filter. You only need to install it at the bottom of the suction tube, which can effectively separate the oil dirt and oil, so as to ensure that pure oil is pumped..
- Good Sealing: 3 piece segmented suction tube, easy to adjust the length of suction tube according to the actual situation, and easy to store and carry at the same time.suction tube with screw thread, good connection performance, strong sealing, effectively prevent oil leakage..
Check StockOEMTOOLS 24938 9.5L Pneumatic/Manual Fluid Extractor, Manual and Pneumatic Oil Extractor, Fluid Vacuum Extractor, Vacuum Evacuator
- Carefree Car and Boat Care: Easily remove engine oil, transmission fluid, power steering fluid, gear oil, coolant, and more with this versatile fluid evacuator pump.
- Double Duty: For pneumatic extraction, insert the suction hose in the vacuum extractor pump receiving hole.
- Manually suction fluid with the engine oil pump's oversized handle.
- Don’t Cry Over Spilled Oil: The 9.5-gallon reservoir is a solid one-piece tank that can't leak out the bottom.
- The built-in shutoff prevents overfilling the extractor pump reservoir.
- Time Flies: Draining oil from beneath a vehicle takes eons.
- The fluid pump's 5ft hose and dipstick adapter extracts automotive fluid directly from the dipstick tube.
- Under Pressure: Change transmission fluid anytime with the pneumatic and manual pumping options.
- This fluid extractor pump works at 85 PSI and a max pressure of 120 PSI.
Check StockEONLION 10L Pneumatic Fluid Extractor Dispenser Set ATF Refill Tool Kit for Changing Oil in Engine Transmission Gear Gearbox
- Function-10L capacity pneumatic air suction pump will help you quickly change (pump/distribute) the vehicle's ATF oil..
- Why Need It- Pneumatic oil change tool set allows two-way operation of oil suction and refueling, quick and sparkless. The consistent conversion of the 2-way control valves (blue screw valve and air inlet ball valve) on the pump assembly to achieve the conversion between extracting and dispensing, very easy..
- Advantage- Fluid extractor can insert into engine dipstick tube to extract and refill engine oil or transmission fluid directly, no more need to crawl about under lifted vehicles and avoid mess..
- Simple Operation-load more fluid at once. Pneumatic operation, easy to suck or pump oil. Equipped with pressure gauge (0-80 psi/0-6 bar), which can accurately read data..
- Fitment- Suitable for a variety of models, such as compatible with Audi/Benz/BMW/Ford/Mini Cooper/Honda/Hyundai/Infiniti/Kia/Lexus/Nissan/Skoda/Toyota/Porsche/Volvo/Volkswagen DSG/Volkswagen CVT..
Check StockSWANLAKE 6.5 Liter Pneumatic/Manual Fluid Extractor Pump,Oil Changer Vacuum Fluid Extractor,Oil Change & Fluid Change Tool
- Pneumatic mode and manual mode to fit all situation. The manual mode could be used by itself without any other equipments.The pneumatic mode turns the pump into a high-speed oil changer as long connect with air compressor..
- 6.5L vacuum fluid extractor comes with 5 different diameter tubes go to the bottom of oil pan. also 3.2 feet flex hose and 3 extra dipstick hoses to reach the bottom of the reservoir and suck up all fluid..
- Fast suction speed of 1.8L/min. The oil change pump extracts engine oil from a 4-cylinder car in a couple of minutes in pneumatic mode..
- Use this oil extractor pump, the engine oil and transmission fluid could be extracted directly by the dipstick tube, the sealing cap is attached to stop the liquid from spill during transportation..
- Its a perfect tool for working on vehicles anytime and anywhere.no need to lift up or crawl under the car to drain out the oil.NOTE:fluids with high volatility, high corrosion, high alkalinity and high temperature CANT be used..
Check StockOil Transfer Pump Extractor, Electric Oil Pump Fast Oil Change Transmission Fluid Extractor Pump, 12v 60w Diesel Fluid Scavenge Suction Pump for Changing Oil, Boat, Tubes, Truck, RV, ATV, Riding Mower
- QUICKEST, CLEANEST OIL CHANGE EVER! - Oil Pump for Oil Change. Helps bleed diesel engines after filter change essential tool. Suck up to pump, good to go! Just get the motor warm. Turn it off and turn on the oil pump extractor. Its that easy. It drains to the last drop. Makes your oil changes that much quicker and cleaner. Worked great to suck out old brake fluid, differential fluid, gear oil, transmitting fluid..
- POWERFUL SUCTION OIL FUNCTION- This high efficient battery powered oil extractor pump is easy to pump various fluids and oils. Easy to put together, all the hoses came with it. You just need to place the inlet/outlet hoses at the appropriate positions, connect the power clamps to the car battery, ran the small hose down the dipstick tube and turned it on, and press the button. Simple On/Off Power Switch, easy to use. Great for a quick oil change..
- DIFFICULT OIL EXTRACTION NO MORE - The 12v Oil Change pump extractor are very easy to use and makes a top down oil change so easy. Ideal diesel fluid oil transfer pump extraction equipment for quick and clean oil-changes. The oil will simply draw out the motor through the oil dipstick bore..
Check StockFord Racing M6675A460 Oil Pan Kit Includes Rear Sump 6 Quart
- Fits 1979 - 1995 Mustang and Fox chassis.
- Kit includes rear sump oil pan, dipstick, dipstick tube, pickup, and main cap stud.
Check Stock