Outboard Motor, 6hp Heavy Duty Boat Engine Fishing Boat Motor w/CDI System Water Cooling System (2 Stroke 6 hp)
- Short axle: axle length 381 mm (15 inches) suitable for boats below 44 cm(17.32inches) (inclusive) transom height.
- Hangkai two-stroke water-cooled outboard engine must put the machine in the water to start the machine to start (do not start the machine on shore).
- Hangkai two-stroke water-cooled outboard engine uses the specified two-stroke engine oil in strict accordance with the instructions Mix it with No. 87 gasoline and use it in the correct proportion. Do not use four-stroke engine oil, automobile engine oil, Gear Oil.
- Attention: It is strictly forbidden to start the machine on the shore. The two-stroke outboard engine should use a mixture of two-stroke engine oil and gasoline. The new machine is running in within 10 hours. The fuel ratio is 30L gasoline: 1L engine oil, and the ratio is oil after 10 hours. 50L: Oil 1L must ensure that gasoline and oil are fully mixed, otherwise it will damage the machine.
- The ignition system of this outboard motor has a CDI ignition system. So you can start the motor quickly and safely, which saves your time and is very convenient to use. This outboard adopts an international standard air intake system and compression ratio, which can effectively improve combustion efficiency and thus reduce fuel consumption. It....
Check StockSuperior Engine System Outboard Motor 4-strok Inflatable Fishing Boat
- Engine has been certified by CE /EPA. Outboard engine with reverse gear.
- Suitable in freshwater or saltwater . Perfect math inflatable kayaks,fishing boats,sailboats and canoes..
- Durable----Compact structure,lightweight and easy to carry,anti-corrosive construction,forward and neutral design..
- Fuel efficient----Latest fuel saving technology and advanced combustion chamber with four stroke outboard engines,gasoline burn completely,can make every drop of gasoline into power.The 4 stroke saves 30% fuel than 2 stroke..
- Environmental protection----Clean and pure gasoline fuel makes emissions targets the outboard engine has been able to meet the European and American CE certification,which contributed to the promotion of green sports.In addition,it will not be like two stroke outboard engine is the same keep without burning oil into the water..
Check StockTUFFIOM Outboard Boat Motor Stand, Engine Carrier for Storage Maintenance, 440lbs Weight Capacity, Easy Assembly
- STEEL CONSTRUCTION: With tubes made of steel, the boat motor stand, weighing about 13.2lbs, can hold up to 440lbs. And the size of the hanging board is about 15.5” x 7.9” and its thickness is about 1.6”, allowing it to hold outboard engine more securely..
- EASY ASSEMBLY: Designed with simple structure, the outboard engine stand can be assembled in a breeze..
- MULTI-PURPOSE: The boat motor stand is ideal for storing and maintaining the outboard engine in the garage. It can help you hold the outboard engine for repair or maintenance..
- TRIANGLE STRUCTURE FOR STABILITY: The boat motor stand is designed with triangle structure, which allows it to stand more stably..
- DIMENSIONS: The overall dimensions of the boat motor stand is about 23.4”W x 18.9”D x 35.8”H..
Check StockOutboard Switch Box CDI Power Pack, Outboard Engine Power Pack for Evinrude Johnson Engine V4 1989‑1998 85 88 90 100 110 112 115HP, OEM 0583773, 0584028, 0584027
- Part Number: Replacement for OMC 0583773, 0584028, 0584027, 0584029, 585260, 585224, replacement for Sierra 18‑5770 for reference, please double check before purchasing..
- Wide Application: The outboard engine power pack is especially designed replacement for Evinrude Johnson Engine V4 1989‑1998 85 88 90 100 110 112 and 115HP to better meet your needs..
- Excellent Function: Heavy duty outboard engine power pack is engineered for no rpm limit, can be usd to reopen the engine in the short time for better driving experience..
- Reliable Materials: The superior outboard CDI power pack is constructed from carefully selected ABS plastic with professional production, designed for using in marine environment, durable to use..
- Stringent Manufacturing: Advanced outboard power pack is strictly built to original standard specifications, designed to have the same form, fit and function as original, highly dependable in using..
Check StockLYNICESHOP Electric Outboard Motor, Electric Outboard Trolling Motor Boat Engine Long Shaft 48V 1000W Heavy Duty Trolling Electric Trolling Motor for Kayak Canoe Fishing Boat Small Yacht
- Electric Outboard Motor: Electric outboard trolling motor Model: DD-48V-1000W, Shaft length: 508mm(Suitable Electric Outboard Motor: Electric outboard motor Model: DD-48V-1000W, Shaft length: 508mm(Suitable for ships with stern plate 45-55 cm), Use voltage:48V, Current:18A, No-load Speed:3000 rpm, Recommended Battery: 48V 100A/3-4H, Product Weight:10.5KG, Power:1000W, Speed:15 KM /H, Gross Weight / Net Weight:10.5KG/13KG, Start Key:NO, Reverse Gear:NO..
- High Quality Materials: Electric outboard trolling motor is made of aluminum, light weight, good electrical conductivity, thermal conductivity, ductility and corrosion resistance, and pure copper core brushless motor, strong power, low energy consumption and long service life, aluminum alloy suspension bracket, 90° rotatable bracket, more stable and durable..
- Superior Performance: Electric outboard motor has ultra-low power consumption to maximize the use of your 48V battery, vertically mounted engine design for increased power, performance and durability, excellent outboard corrosion prevention system and anode for increased durability, suitable for small watercraft such as inflatable boats, canoes and aluminum fis....
Check StockMotorcycle Handlebar Switch ATV Handlebar Light Switch 12V CNC Aluminium Alloy Push Botton Waterproof Switches for Motorcycle Light Bike Light Spotlight- Fits 7/8\ Handlebars (22mm)
- Brand new Kill Switch Safety Tether, is made of high quality plastic, waterproof and durable.
- Outboard engine switch tether is used for emergency safety and is used to cut off the power/ignition of the outboard engine.
- Switch Safety Tether is easy to use, easy to mount on the engine stop switch key.
- Simple installation, easy to mount on the engine stop switch key.
- Kill Switch Tether is suitable for Marine Mercury Tohatsu motorboat and outboard motors without battery & electric start.
Check StockMinn Kota E-Drive - Electric Outboard - 2Hp - 48V - 20" Shaft
- ♛ 246CC Outboard Stroke Petrol Heavy Duty Boat Engine Motor Description -- Displacement: 246CC.
- Recommended Lubricant: 2 Stroke Lubricating oil.
- ♛ Outboard Stroke Motor Boat Engine Works with little noise.Economical and compact structure. Durable, lightweight and and easy to carry,anti-corrosive construction. forward and neutral design.Maneuverable and safe twist grip throttle control.Packing size: 133x71x38.5cm.
- Recommended Propeller range: 3 -9"1/4''x8".
- ♛ Outboard vertical mount engine design for increased power, performance and durability, superior CDI Ignition system for increased efficiency, twist grip throttle handle and engine stop button for improved response..
Check StockRacor RK30475; Amber Repl.Bowl B32013/14 320
- Racor 60 GPH Gas Outboard Filter With Clear Bowl Inboard or outboard engine protection for a smoother operation and longer engine life, these filters easily spin onto the existing filter heads. Features a high capacity 10 micron Aquabloc II element that removes 99% of free water and sediment. Clear Bowls: Use for outboard and above deck installations. Metal Bowls: USCG regulations require use of flame resistant metal bowl below deck..
- GPH 60 / Bow lClear / Application Mercury O/B / Size 3.8" dia. x 7.2" H.
Check StockMotor Generator 12V Generator Starting Motor Replacement Fit for Air-Cooled Diesel Engine 178F 186F 188F
- ...15TLR 2002-2002, For 115TLR 2003-2006, For 115TLR 2007-2009, For 115TLR 2010-2010, For 115TXR 2002-2002, For 115TXR 2002-2006, For 115TXR 2003-2006, For 130TLR 1997-1999, For 130TLR 1997-2004, For 130TLR 2002-2002, For 130TLR 2003-2004, For 130TXR 2002-2002, For 130TXR 2002-2004, For 130TXR 2003-2004, For 115-300HP Outboard engine 1997-2018..
- Fitment: The tilt trim motor fit for 115TJR 1997-1999, For 115TLR 1997-1998, For 115TLR 1997-2010, For 115TLR 2002-2002, For 115TLR 2003-2006, For 115TLR 2007-2009, For 115TLR 2010-2010, For 115TXR 2002-2002, For 115TXR 2002-2006, For 115TXR 2003-2006, For 130TLR 1997-1999, For 130TLR 1997-2004, For 130TLR 2002-2002, For 130TLR 2003-2004, For 130TXR 2002-2002, For 130TXR 2002-2004, For 130TXR 2003-2004, For 115-300HP Outboard engine 1997-2018..
Check StockSuperior Engine air-Cooled System Outboard Motor 4-strok Inflatable Fishing Boat
- Engine has been certified by CE . 360° rotary handle with self lock..
- Suitable in freshwater or saltwater . Perfect math inflatable kayaks,fishing boats,sailboats and canoes..
- Durable----Compact structure,lightweight and easy to carry,anti-corrosive construction,forward and neutral design..
- Fuel efficient----Latest fuel saving technology and advanced combustion chamber with four stroke outboard engines,gasoline burn completely,can make every drop of gasoline into power.The 4 stroke saves 30% fuel than 2 stroke..
- Environmental protection----Clean and pure gasoline fuel makes emissions targets the outboard engine has been able to meet the European and American CE certification,which contributed to the promotion of green sports.In addition,it will not be like two stroke outboard engine is the same keep without burning oil into the water..
Check StockYoHa Boat Engine Safety Kill Stop Switch Lanyard Emergency Cut Off Cord for Yamaha Tohatsu Outboard Motors
- ⛴This is a engine stop safety lanyard tegher only,Clip-on style,Length of safety lanyard (red one):55 in.
- ⛴Fits and replace all Yamaha /Tohatsu Outboard motors and all chinese brands of outboards (Parsun,Hidea,Yamabisi ,Hangkai,Powertec).
- ⛴Used to cut off the power/ignition of the outboard engine.Also fit Chinese outboard engine brands: Parsun, Powertec, Seatec, Hidea Etc..
- ⛴HIGH QUALITY - The extension length is 55 In, with reinforced nylon fiber in the middle, and the tensile strength is more than 100LB..
- ⛴OUR GUARANTEE - 12-month service support-REPLACEMENT or FULL REFUND for defective item or dissatisfied one, no hassle to return.Order now without....
Check StockTFCFL 2 Stroke 18HP Electric Outboard Motor,Outboard Motor Boat Engine Water Cooling CDI System,246CC Heavy Duty Boat Engine Short Shaft 13.2KW
- 【2 STROKE 18HP OUTBOARD MOTOR ENGINE】 Displacement: 246CC.
- Packing size:133x71x38.5cm/52.3''x27.9''x15''.
- 【Main Parameters】Control System: #93 gasoline.
- Recommended Propeller range: 3 -9"1/4''x8".
- Recommended Lubricant: 2 Stroke Lubricating oil.
- 【 2 Stroke 18HP Outboard Motor 】Water cooling technology to improve the reliability of the whole machine.
- Light weight, easy to carry, unique appearance, large tank capacity.The engine oil must be a two-stroke special engine oil. Note:The two oils must be stirred evenly.
- After use, the fuel in the carburetor must be completely discharged..
- 【 High Efficiency 】Outboard vertical mount engine design for increased power, performance and durability, superior CDI Igniti....
Check StockFasco D156 5 Frame Open Ventilated Shaded Pole Direct Drive Blower Motor with Sleeve Bearing 1/6HP 1050rpm 115V 60Hz 6.6 amps
- Fuel pumps on outboard motors work a little bit differently than they do on automobile engines. The outboard fuel pump has a sensitive diaphragm that....
- If your Evinrude of Johnson Outboard Engine won't run at standard power or will only run with the choke on a faulty fuel pump is likely the cause.....
- Fits for the Following Outboard Engine: Johnson / Evinrude Marine 6 H.P 1981-1992.
- Customers can find the product you need accurately according to the OE number. OE part number: 397274, 397839, 391638, 395091, Mallory 9-35350, and....
Check Stock