Engine Oil Cooler Filter Housing Adapter Compatible with 3.6L 2014-2017 Jeep Wrangler Dodge Challenger Charger Chrysler 200 300 Town&Country Ram 68105583AF
- *New Upgrade Quality & Improved Manufacturing. Engine Oil Cooler Filter made in better raw material. The radiator parts are welded layer by layer of aluminum alloy plates. All parts are tested with high-pressure fluid. The main plastic body is made by new ABS, NOT by recycled ABS( which will leak after using for 6 or fewer months.).
- Seal upgrade, New Fluororubber gaskets are more durable and prevent leaks better. Even the seal is made of good rubber. Well-made copper base and port. Intake Manifold Gasket Set is made of high-quality silicone..
- Oil Cooler is Replacement for 2014 2015 Dodge Durango.
- Ram C/V. 2014 Dodge Avenger.6 Cyl 3.6L. 2014 2015 2016 2017 Chrysler 200,300.
- This Engine Oil Cooler Filter is Compatible with 3.6L 2014-2017 Jeep Wrangler Grand Cherokee Dodge Avenger Challenger Charger Caravan Chrysler Town & Country..
- *This Cooler comes without sensors! It is recommended to use the original sensor for more stability. Tips: To prevent leaks or other problems, make sure each washer is installed in the right place. Any questions, please contact us for help..
Check Stock
Engine Oil Filter Housing with Oil Cooler Sensors Gaskets Adapter Kit Compatible with 2011-2013 Chrysler 200 300 Town & Country, Dodge Charger, Jeep Wrangler, Ram 1500 V6 3.6L Replace# 5184294AE
- ✅【PERFECT REPLACEMENT】: A damaged oil filter housing or cover will cause a leak and allow debris into the oil, which will damage engine parts and clog the oil filter. Our oil cooler and filter housing kit with sensors and gaskets can perfect replacements for damaged ones and work flawlessly..
- ✅【BENEFITS】: The engine oil cooler can keep the engine oil cool and clean, allowing the car to accelerate faster and helping to extend the life of the oil and engine. Made with lightweight aluminum alloy, use 8-layer thick plates and 8-layer thin plates, cross double-layer design, which increases cooling efficiency..
- ✅【FITMENT】: The engine oil filter housing and cooler assembly Compatible with 2011-2013 Chrysler 200 300 Town & Country, 2011-2013 Dodge Charger Challenger Avenger Durango Journey Grand Caravan, 2011-2013 Jeep Grand Cherokee Wrangler, 2013 Ram 1500, 2012-2013 Ram C/V Base (6 Cyl 3.6L Engine Only).
- ✅【REPLACE PART NUMBER】: 5184294AC, 5184294AD, 5184294AE, 5184304AD, 5184304AE, 5184304AF.
- ✅【WARRANTY】: 12 MONTHS WARRANTY. If you're not 100% satis....
Check Stock3mirrors Aluminum Engine Oil Cooler Filter Housing Adapter Replacement for 2017 2018 Dodge Chrysler 3.6L & 3.2L Oil Radiator Assembly 68310865AB with Sensor& Manifold Gaskets 68310865AA, 68310865AC
- Direct Replacement OE number, 68310865AB, 68310865AA, 68310865AC, Engine Oil Cooler Compatible with 2017 2018 Ram 1500 ProMaster 1500 ProMaster 2500 ProMaster 3500 3.2L and 3.6L engines..
- The Oil Cooler is a Replacement for 2017 Chrysler 200.
- It's an Upgraded Aluminum alloy oil cooler housing kit, The radiator parts are welded layer by layer of aluminum alloy plates, with High and low-temperature resistance. All parts are tested with high-pressure fluid..
- The Oil Cooler Filter will help you solve the problems of oil leaking, oil temperature too high and oil pressure too low. A good oil cooler filter assembly can keep the engine running normally, making you have a safe and comfortable driving experience. A worthwhile investment for your car..
Check Stock
Engine Oil Cooler Filter Housing Adapter Compatible with 3.6L 2014-2017 Jeep Wrangler Dodge Challenger Charger Chrysler Town&Country w/Intake Manifold Gaskets Plenum Set, Oil Pressure Sensors
- *New Upgrade Quality & Improved Manufacturing. Engine Oil Cooler Filter made in better raw material. The radiator parts are welded layer by layer of aluminum alloy plates. All parts are tested with high-pressure fluid. The main plastic body is made with new ABS, NOT recycled ABS( which will leak after using for 6 or fewer months.).
- Seal upgrade, New Fluororubber gaskets are more durable and prevent leaks better. Even the seal is made of good rubber. Well-made copper base and port. Intake Manifold Gasket Set is made of high-quality silicone..
- This Engine Oil Cooler Filter is Compatible with 3.6L 2014-2017 Jeep Wrangler Grand Cherokee Dodge Avenger Challenger Charger Caravan Chrysler Town & Country..
- Oil Cooler is Replacement for 2014 2015 Dodge Durango.
- Ram C/V. 2014 Dodge Avenger.6 Cyl 3.6L. 2014 2015 2016 2017 Chrysler 200,300.
- This Cooler comes with Temperature Sender Sensors! Tips: To prevent leaks or other problems, make sure each washer is installed in the right place. Please make sure that the oil port/hole is appropriate, some users said that the size is too large for their models, only simple grinding can be normal installation. Any questions, please contact us for help..
Check Stock
Engine Oil Cooler Kit - Compatible with Ford Trucks - Powerstroke 6.0L V8 F250, F-350, F450, F550 Super Duty, Excursion, E350, E-450 - Replaces Part 904-228, OCK388, 3C3Z 6A642 CA - Gasket Seal Kit
- Replacement Engine Oil Cooler With Gasket Seals & O-Rings - Is a heat-exchanger which is commonly a radiator type of cooler which cools engine oil from the engine. It removes excess heat from the oil using the engine coolant that flows around as the engine oil passes through the cooler. The engine oil cooler can be located under the intake above the engine..
- Compatible Replacement for Ford Vehicles - 2004 - 2005 E-350 Club Wagon | 2004 - 2010 E-350 Super Duty | 2004 - 2007 E-450 Super Duty | 2003 - 2005 Excursion | 2003 - 2007 F-250 Super Duty | 2003 - 2007 F-350 Super Duty | 2003 - 2007 F-450 Super Duty | 2003 - 2007 F-550 Super Duty |..
- Replaces Part# 3C3Z 6A642 CA, 904228, 904-228, 015339, OCK388, 3C3Z-6A642-CA, 3C3Z6A642CA - If you are noticing engine oil in your coolant system, oil or coolant leaking from the oil cooler or engine coolant mixed with your engine oil then your oil cooler might need to be looked at or replaced. This engine oil cooler kit also includes viton gasket seals needed for the proper service on your vehicle..
- OEM Fit, Quality, Finish - While this is not a genuine OEM part, it is a direct replacement and it will fit and work exactly like the factory part. This part is commonly found on popular Powerstroke 6.0 V8 models....
Check Stock
Engine Oil Cooler Filter Housing Adapter Compatible with 3.6L 2011-2013 Jeep Wrangler Dodge Charger Chrysler Town&Country w/Intake Manifold Gaskets Plenum Set, Oil Pressure Sensors 5184294AE
- *New Upgrade Quality & Improved Manufacturing. Engine Oil Cooler Filter made in better raw material. The radiator parts are welded layer by layer of aluminum alloy plates. All parts are tested with high-pressure fluid. The main plastic body is made of new ABS, NOT recycled ABS( which will leak after use for 6 or fewer months.).
- Seal upgrade, New Fluororubber gaskets are more durable, Oil and temperature resistant. Even the seal is made of good rubber. 12 pcs Intake Manifold Gasket Set is made of high-quality silicone. Well-made copper base and port, as well as the thread sealant on sensor connectors, can maximumly prevent oil leakage..
- This Engine Oil Cooler Filter is Compatible with 2011 2012 2013 Jeep Wrangler Grand Dodge Grand Caravan Chrysler 200 300 Town & Country Ram 1500. OE 926-876,926-959, 5184294AC, 5184294AD, 5184294AE, 5184304AE, 5184304AF, 68105583AA, 68105583AB. Please check the fitment before ordering..
- Oil Cooler is a Replacement for 2011-2013 Dodge Journey.
Check StockMOSTPLUS Aluminum Engine Oil Cooler with Oil Filter Housing Adapter Assembly 926-876 68105583AF Compatible with 2011-2017 Chrysler Challenger Jeep Ram 1500 3.6L
- High Quality: Thread sealant on sensor connectors and Anti-corrosion O-rings can maximumly prevent oil leakage. Aluminum alloy builted Oil cooler drop temp in seconds..
- Exceed Performance: Strain clean and cold oil to your engine for protecting engine and better driving experience. Tips: Recommend swap in factory OE sensor for smoother usage..
Check Stock
EONLION 10 Row AN10-10AN Oil Cooler Kit Universal Engine Transmission Aluminium Alloy Black Usable To Cool Down Engine Oil Increases Engine Oil Capacity Available Comes with 2 Oil Lines
- ADVANTAGES- Made of high quality T-6061 aluminum. It can be used to cool engine oil, transmission and rear differential..
- FUNCTION- Keep the oil temperature low to prevent damage or even seizure of the engine..
- HOW IT WORKS- The 10-row oil cooler is basically like a radiator to cool your oil. Install the engine oil in a reasonable location with good air, your engine oil will enter the engine oil from here, and then reflux and cool down, and ensure that the engine oil is within a certain working temperature range..
- ADAPTATION- This is a universal oil cooler kit. The design of this oil cooler is smaller and lighter, suitable for narrow spaces and meet the needs of more lines at the same time..
- WHY DO WE NEED AN OIL COOLER KIT-When the engine rotates at high rpm under high load, it will generate friction, and the heat generated by friction will be transferred to the oil instead of overheating. After the engine oil is decomposed, it cannot be lubricated well, thus shortening the service life of the engine..
Check StockKIMISS Towing Hitch Engine Oil Coolers & Kits, Motorcycle Engine Oil Cooler Oil Cooling Radiator Kit for Honda CB CG 100CC-250CC(85ML-Silver)
- 【Required accessories】Whether you're using a top-down corner engraving or pulling down a tow, your high speed requires a reliable and efficient cooling system..
- 【Minimal pressure loss】With minimal pressure loss, the kit uses a large oil drain cooler mounted in the front grille for optimum airflow and cooling..
- 【Funtion】Cooling the engine temperature keeps the engine within normal operating temperature range, reducing engine load and extending its life..
- 【Two choices】Invisible black and stylish silver cooler options include pre-assembled stainless steel cords and special mounting brackets for a painless, clean installation..
- 【Fitment】Motorcycle Oil Cooler System Kit, Fit for Honda GY6 100CC-150CC Engine. Transmission Cooler Mounting Kit Oil Cooler Lines.
Check StockJobs USA Search
- 【Compatible】Engine oil cooler fits for 3.6L V6 engine. Replacement part number is 5184294AE. Before ordering, please confirm whether the accessories are suitable for your vehicle. 2011-2013 dodge journey.
- 【Advantage】The oil cooler uses 8 layers of thickened aluminum and 8 layers of thin aluminum, thick and thin cross double layer design, can cool the oil into the engine, with superior cooling rate.
- Oil filter housing comes with a new high quality pre-installed oil filter, it allows the engine oil to be strained through the filter and remove foreign particles to keep your engine running clean..
- 【High-quality Sensors】Our sensors are oil temperature sensors, fluid temperature sensor and oil pressure sensors that meet professional specifications. Using professional ultrasonic welding technology, as well as the sensor threads have been made thread adhesive sealing t....
Check Stock
ACDelco GM Original Equipment 41-962 Double Platinum Spark Plug (Pack of 1)
- One-piece, fired-in suppressor seal blends three glass types for a gas-tight seal that helps reduce radio frequency and engine interference, regulate spark plug energy, and protect against compression pressures for long life.
- Double platinum point pad on center and ground electrode offer excellent durability and consistent voltage demands to help reduce wear on ignition system.
- Pure copper core results in cooler electrode temperature for maximized durability and fouling resistance.
- Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional.
- ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle.
- GM regularly updates production and service part designs to integrate new materials and technologies.
Check StockLR028136 LR011997 Engine Oil Cooler Inlet Connector replacement for Land Rover Sport LR4 Range Rover
- Replacement for Land Rover Engine Oil Cooler Tube C2Z18658.
- Strictly Quality Control to Ensure High Performance.
- Include an Extra Engine Oil Cooler Line O-Ring LR030593.
- Good Reliability & Durability,Long Working Hours.
Check StockCool Your Engines (Original Mix)
- 【Compatible】Engine oil cooler fits for 3.6L V6 engine. Replacement part number is 5184294AE. Before ordering, please confirm whether the accessories are suitable for your vehicle. 2011-2013 dodge journey.
- 【Advantage】The oil cooler uses 8 layers of thickened aluminum and 8 layers of thin aluminum, thick and thin cross double layer design, can cool the oil into the engine, with superior cooling rate.
- Oil filter housing comes with a new high quality pre-installed oil filter, it allows the engine oil to be strained through the filter and remove foreign particles to keep your engine running clean..
- 【High-quality Sensors】Our sensors are oil temperature sensors, fluid temperature sensor and oil pressure sensors that meet professional specifications. Using professional ultrasonic welding technology, as well as the sensor threads have been made thread adhesive sealing t....
Check Stock
