Best Engine Pushrods - TopShopReview.com

RJSPHH Adjustable range of the push rod length checker is 6.80' to 7.80'

re crafted from a steel alloy with black oxide coating for years of accurate measurements..
They are easy to read and eliminate the need for expensive calipers..
Having the correct pushrods in your engine is a critical factor in proper rocker arm geometry, and this is the best tool to measure pushrod length.
Individual Length Checker Adjustable Range: 6.800" to 7.800".

Flat adjustable guide plates for Small Block Chevy and Small Block Ford applications.
For high performance Small Block Chevy and Small Block Ford engine applications.
Precision die-stamped and heat-treated steel material for a closer setting and improved durability.
Can be adjusted inward or outward for maximum convenience.

7.800" Std Length Pushrods Chevy SBC 400 383 350 327 305 283 OEM Replacement.
Perfect for any Cam or Rocker upgrades - easy to install.
Set of 5/16" diameter push rods in 7.800" stock length that are guide plate compatible. Made in the USA. Set comes with 16 pushrods..
These pushrods were used in many of the following small block.
Chevy V8 engines as well as many GM, Buick, Cadillac, GMC, Oldsmobile and Pontiac applications that used the Chevy engines. They also fit some AMC and Wrangler V8 engines..

7.400" One Piece Pushrods, 5/16" diameter, and .080" wall (set of 16).
made of 4130 Structural Steel material for premium quality and high performance.
Replacement pushrods for 1997-2012 GM LS-series GEN III and IV small block V-8 engines. Fits 4.8 5.3 5.7 6.0 LS1 LS2 LS3 LS6 L99 LS4 LS9 LSA LQ4 LQ9 L76 L92.
Compatible with 99-02 Camaro & Firebird, 10-13 Camaro, 99-13 Corvette, 04-06 Pontiac GTO, 04-07 Cadillac CTS-V, 08-09 Pontiac G8, 00-13 Tahoe/Yukon/Escalade, 03-09 H2 , 01-13 Chevrol Avlanche, 99-13 Silverado & Sierra 4.8L/5.3L/6.0L.
High Quality, Long Lasting Finish - Pushrods are all finished with a black oxide coating, ensuring the the chromemoly steel will not rust or wear prematurely..

The 64cc combustion chamber allows this head to be used with stock pistons, retaining the 9.5:1 compression.
The modern combustion chamber design also improves the combustion process and the larger than stock intake and exhaust ports move more air through your engine.
E-Street cylinder heads feature as-cast ports and are designed for entry-level street performance applications operating in the idle-to-5500 rpm range.
Manley one-piece 4130 chromoly pushrods are rated to 128,000 psi. Features swedged end, .080" wall, and 5/16" diameter.
For hydraulic or solid flat tappet cam engines with less than 400 lbs. open spring pressure and under 7500 rpm.

Brian Tooley Camshaft, BTR Platinum dual springs with Steel Retainers, and 7.400 Chromoly Pushrods..
Cam specs are Specs: 226/231 .610"/.608" 113+4 and comes a 3 bolt timing gear pattern..
When you need a little more RPM than the stage 1 can give you. If you have a light car wanting to push the limits, then this is the go to cam for your 5.3/6.0 S400 equipped combination..
Springs: BTR Platinum Dual Spring Kit for LS engines using stock rocker arms. Includes dual polished springs, matching Steel Retainers (faster reving than steel), Locators for stock guides, locks and seals..
Pushrods: 7.400" Long 5/16 Chromoly .080 Wall Pushrods by Brian Tooley Racing. Highly recommended when upgrading Camshafts..

✅ One-Piece Construction, Pilida high energy pushrods are Heat Treated and prenium Black Oxide Coated, more durable longer Lasting Durab than synthetic processing..
✔ 16Pcs LS Pushrods, made of TRUE 4130 Chrome Moly material for premium quality and high performance. Centerless ground to exacting tolerances, and case hardened to RC 60.
✔ 7.400" Long 5/16" pushrods to meet standard specification. Overall Length: 7.400.

Fits 4.8 5.3 5.7 6.0 LS1 LS2 LS3 LS6 L99 LS4 LS9 LSA LQ4 LQ9 L76 L92.
Set of sixteen (16) stock replacement pushrods for 1997-2012 GM LS-series GEN III and IV small block V-8 engines..
These are the stock length 7.400" Long 5/16" pushrods.
Pushrod specifications are as follows: OVERALL LENGTH: 7.400" TUBE SIZE: 5/16" x .075" (stock) MATERIAL: 1010 ENDS: 5/16" ball (drilled).

Extreme Duty steel pushrods designed for over 750 HP.
Extreme duty pushrods consist of a 3/8? .095? wall intake pushrod and a 7/16? .120? exhaust pushrod.
Fit 24V Cummins 5.9L/6.7L through years 1998.5-2017.

Brian Tooley Turbo LS Stage 3 Camshaft, BTR Platinum dual springs with Lightweight Titanium Retainers, and 7.400 Chromoly Pushrods..
Cam specs are:230/235 .616"/.614" 114+4 and comes a 3 bolt timing gear pattern..
When you need a little more RPM than the stage 2 can give you. If you have a light car wanting to push the limits, then this is the go to cam for your 5.3/6.0 S400 equipped combination..
Springs: BTR Platinum Dual Spring Kit for LS engines using stock rocker arms. Includes dual polished springs, matching lightweight Titanium Retainers (faster reving than steel), Locators for stock guides, locks and seals..
Pushrods: 7.400" Long 5/16 Chromoly .080 Wall Pushrods by Brian Tooley Racing. Highly recommended when upgrading Camshafts..

Lock on nylon control horns, 21x11 mm, designed with 4 holes, easy to install, sturdy in flight..
Pushrod, easy to bend to fit the angles that you need, work great with the micro servos and projects..
Pushrods Diameter: 1.2mm/0.047", Pushrods Length: 260mm/10.24"..
Application: for Vehicles & Remote Control Airplane Aircraft Toys..
Package Content: 10 x 1.2 x 260mm Pushrod + 10 * 20x11mm Lock On Control Horn..

Package Include: 10x Pushrod Connector Linkage Stopper + 10x Pushrods + 1x Hex Wrench, 20pcs In Total.
Pushrod Connector Size:Diameter of the Hole:1.3mm, Compatible with 1.0 / 1.1 / 1.2 / 1.3mm Pushrods.
【Why choose us】100% New, Genuine HobbyPark RC Products,Exquisite workmanship & Durable,Buy with Confidence,Friendly Customer Service..