Categories

Best Engine Surface Clean

Silicone Heating Pad, 2 x 5inch Car Universal Oil Pan Heater 50W Battery Heater Pad 120V Engine Block Heater Pad with 68Inch Long Power Cord

  • Heating Technique: In the cold winter, use our 120V 50W silicone heating pad to turn on the power before starting the engine, and continue to evenly heat the metal surface to make the oil reach the perfect temperature.
  • Improve Engine Oil Flow: Continue to transfer heat to reduce the consistency of the oil, keep the engine oil as a thin liquid, help you better lubricate the engine, reduce wear, and extend the service life of the engine and gearbox.
  • High-Quality Material: Our oil pan heater is made of wear-resistant silicone, waterproof, oil-proof, and low-temperature resistant, the entire surface is heated evenly, strong adhesive makes it fixed on the metal surface. Please note: it is very hot after heating, please use a thermostat (not included) to adjust the temperature.
  • Simple Operation: Clean the metal surface, tear off the backing of the engine heating pad and stick it firmly to the outside of the oil pan or other metal surface, insert the 2-core power cord into the socket, and the heating starts immediately, after 10-15 minutes, unplug the power cord and start the vehicle to resume normal operation.
  • Adaptability: The size of the engine block heater is 2 in x 5 in, and the power cord is about 68 inches. It is only suitable for automotive parts with m....
Check Stock

Vehicle Maintenance Log Book: Car Repair Journal / Automotive Service Record Book / Oil Change Logbook / Auto Expense Diary / Engine Autolog / Automobile, Truck Or Motorcycle Owner Gift Notebook

  • ... constant 194°F/90°C, effectively preventing safety hazards caused by high temperature..
  • 【Built to Last】Made of wear-resistant silicone. Oil Pan Heater Pads are waterproof, oil-proof, acid-proof and low-temperature resistant. Only designed for use on automotive metal surfaces such as engine oil pan, fuel tank, reservoir, transmission, etc. Not for personal use or on plastic..
  • 【Easy to Use】Make sure the application surface is clean and dry, peel off paper backing, stick 4" x 5" Silicone Heating Pad with 68" Power Cord to the oil pan surface, connect the power. Once applied, the pads will be permanently installed on the metal surface..
Check Stock

Learn Numbers, Shapes and Colors at the Amusement Park with Max the Glow Train

  • ...icone and power cord connection reduces the risk of short circuit. The hotter the upgraded silicone is the stronger the adhesion. Fast heating, then constant at 194 ℉ / 90℃, prevent the safety hazards caused by high temperature..
  • Easy to Install: Clean and dry the flat surface of the device, peel off the paper backing and apply the oil pan heater, using magnets/adhesives can extend the adhesion time (magnets and adhesives not included).
  • plug the 120V 2-prong power cord into the wall outlet and heat for 10 to 15 minutes..
  • Wide Range of Applications: Two silicone heating pads can be used on the transmission and the engine respectively. Unlike block heaters that do not adhere to aluminum engine oil pans, 150W automotive engine heating pads are used to heat fluids on any metal surface such as engine oil pans, transmissions, diesel tractor engines, snow blowers, generators, etc..
  • for metal surfaces only: keep away from plastic.
  • note: extremely high temperatures, do not touch..
Check Stock

Escape From Alcatraz

  • Get the Rest or Grab the Best! Our premium 2k aerosol engine paint is made in the USA with American materials. Unbeatable quality and durability – easy to apply.
  • Tired of Hit And Miss Paint Jobs with the brush-on solutions? Our 2K aerosol paint steps it up a notch. No brush no fuss. No Primer needed: just clean.
  • mask and spray for a sleek and lustrous engine. It doesn’t get easier than this.
  • Prep is your first step – clean your engine thoroughly using a wire brush with warm dish soap and water. Next use ERA degreaser followed by masking. Finally apply the spray paint by activating the special catalyst that ensures a fast cure and extreme durability.
  • We’ve got the best durability in the business – our special 2K paint uses a catalyst hardener and was purposefully developed to create an incredibly hard chip-resistant surface.
  • chemicals like brake fluid/acetone/lacquer thinner etc. are no problem for our specially formulated 2k paint. We are so confident that we offer a 30 day money back guarantee.
Check Stock

Zerostart 3400072 Silicone Pad Heater Engine Oil, Transmission Fluid, Reservoir and Hydraulic Fluid Heater, 2¼\ x 4\ | 120 Volts | 125 Watts

  • ...ad is rated at 120 volts and produces up to 150 watts, oil pan heater pads built-in automatic thermal protector, effectively preventing safety hazards caused by high temperatures.
  • Easy Set Up - Easy to install, as car engine heater pad requires little mechanical ability, before use, please wipe clean the dust on the surface to keep it dry, and peel off the paper backing from the oil pan heater pad and attach the pad to make it stick stronger..
Check Stock

2 Pcs Silicone Car Engine Heater Pad - 4 x 5in Self-Adhesive Oil Pan Heater Pad with 194°F Thermal Protector, Battery Heater Pad Engine Block Heater Pad with 68\ Long Power Cord 150W 120V

  • [Heat Up the Engine] In the cold winter, use these two engine heater pads before starting the car to bring the oil to the right temperature and thus reduce oil consistency, which will lubricate the engine better and reduce its wear..
  • [Easy to Use] Clean off any grease or grime on the bottom of your oil pan or transmission fluid pan. Peel off the paper backing from the heater. Put flush against the bottom of your oil pan or engine block and have the pad completely secured against the metal surface. Finally, plug the power cord into the outlet..
  • [Thermal Protection] These 150W/120V oil pan heater pads have a built-in automatic thermal protector that keeps the heating temperature at a constant 194°F/90°C, effectively preventing safety hazards caused by high temperatures..
  • [Premium Material] Composed of hard-wearing silicone, these two engine block heater pads are absolutely waterproof, oil-proof, low-temperature resistant and durable enough to serve you for a long time..
  • [Warm Tips] Safety is always our most important concern. Please do not put the car engine heater pad on any plastic surface on your engine to keep from burning up. And do not put it on the air box intake..
Check Stock

Facon 5'' x 4'' Automotive Engine Block Heater Pad with 3M Self Adhesive and Thermostatically controlled, Battery Heater, Engine Oil Pan Heater Pad with 2-Prong Plug, Silicone Sealer Included

  • [Heating Technology] Facon’s Heater Pads provide consistent & efficient protection as the first signs of freezing winter weather approach. Heater Pads are Designed and Engineered to heat fluids with any metal surface such as engine oil pan, fuel tank, reservoir, transmission pan, and more. Transmits heat continuously to keep engine oil as a thin fluid, giving you instant lubrication when starting your engine..
  • [Thermostat Controlled] Plug it into 120V AC Power 10 or 15 minutes prior to start up for perfect engine oil temperature, device heats the oil quickly for those cold start mornings. Built-in Thermostat is set to Turn Itself off at 190°F ( + - 10 degrees). Unplug before driving away.
  • [Specification] Size: 5’’ x 4’’. 120V AC, 150Watt, with Plug: 72-inch (183cm) 2-prong power cord. Waterproof high heat transfer car heated pad. Constructed with silicone coat covering for oil resistance, acid resistance, and added strength and longevity.
  • [Easy Installation] Clean the application surface, peel off the paper backing to adhesively attach this pad to any metal surface. Seal edges using the included weatherproof silicone sealer. Allow to dry before using heater. The silicone sealer keeps weather elements, dirt and debris away from the adhesive su....
Check Stock

53021077 Lifters replacement For 4.7 Dodge/Chrysler Lash Adjusters HLA Replaces Part # 53021077 5073596AA (16 Packs)

  • VALVE LAP TOOL HELPS YOU SEAT VALVES ACCURATELY: Use the ABN Drill Valve Grinding Tool Attachment Valve Lapping Set to properly fit and seat valves into your vehicle engine.
  • Correct surface irregularities and remove sub-surface damage on your new valves with these motorcycle valve lapping tool small engine tools to fit perfectly into the valve guide for a secure fit.
  • For use with fine grinding paste (not included).
  • PERFECT VALVE LAPPING CUP SIZES FOR YOUR NEEDS: 4 attachable suction plates are included with this valve seat lapper tool kit to make fitting and seating various valve sizes in your lawnmower, chainsaw, car, or motorcycle.
  • Includes 20mm (3/4 inch), 30mm (1-3/16 inch), 35mm (1-3/8 inch) and 45mm (1-3/4 inch) synthetic rubber suction cups that are oil and UV resistant.
  • FITS YOUR TOOLS: Small engine valve lapping kit includes a 5 inch rubber roller attachment that has two 8mm (5/16 inch) steel shanks to fit your drill and the included suction cups.
  • Electric drill attachment provides increased control and productivity with less user fatigue while you put the finishing touches on your tune-up.
  • EASY TO USE: Clean all carbon deposits off valve and valve guide.
Check Stock

Silicone Oil Pan Heater Pad 4x5', Self-Adhesive Engine Block Heater Pad- 150W 120V, Transmission Fluid Reservoir and Hydraulic Fluid Heater Pad with Thermal Protector 68' Long Power Cord

  • ...as the functions of fast heat generation, good thermal efficiency, pressure resistance, abrasion resistance, and water resistance, which has a long useful life. You can rest assured to buy Heating Pad in this cold winter..
  • [GOOD ADHESION AND EASY TO INSTALL]- Installation is simple with the self -adhesive. Clean the surface of the oil pan thoroughly and keep the power cord away from any hot exhaust surfaces or moving parts. Tear off the 4 x 5”(10.2cm x 12.7cm) paper back of the Car Engine heating pad, stick the pad to a clean surface, Sticks amazingly well. and then plug the power cord into the socket..
  • [SAFETY WARMING]- There is an automatic thermal protector inside the Oil Pan Heater Pad, which keeps engine block heater pad’s temperature at a certain 90 degrees, which can effectively protect the safety problems caused by high temperature. NOTE:Our heater pad are only used for automobile parts with metal surfaces，such as engine oil, transmission fluid, battery heater,etc..
  • [YOU WILL GET]- 1X Silicone Electric Heating Pad. We provide 2-YEAR WARRANTY and LIFETIME CUSTOMER SERVICE. If car engine heater pad fails, stops working or any other problems, Please feel free to contact us for a replacement, we will give you a satisfactory solution for you w....
Check Stock

ENGINE OIL BLOCK HEATER Pan 3M stick on Pad (120V U.S.A. / Long CORD) Designed for: 4 Cylinder Engines by Z-TOOL HEATER TEC.

  • Z-TOOL HEATER TEC. —— STICK TO CLEAN SURFACE OF OIL PAN ( See Pictures).
  • Z-TOOL HEATER TEC. Cold weather to make sure your engine starts. Make starting faster and easier in cold weather. Provide heat to the cabin much faster. Reduce the wear on your engine during cold weather starts! They plug into a standard electrical outlet and can be put onto a timer, or a temperature triggered electrical outlet. This in effect causes your engine to reach operating temperature much faster and gives you heat inside the cabin much faster as well..
  • On top of the benefit of heating up quicker, it also saves your engine a ton of wear and tear on internal moving parts! When an engine is warm it starts easier, when its cold it is very hard on your engine..
  • Designed for: 2WD 4×4 AWD vehicles w/ 4 Cylinder Engines. Long 4.5 ft Cord.
Check Stock

Car Engine Heater Pad, 4 x 5 inch Car Universal Engine Heating Oil Pan Heater Pad 120V Silicone Electric Battery Heater Pad 150W Engine Block Heater Pad w/Overheat Protector 68\ Long Power Cord

  • ...ad is rated at 120 volts and produces up to 150 watts, oil pan heater pads built-in automatic thermal protector, effectively preventing safety hazards caused by high temperatures.
  • Easy Set Up - Easy to install, as car engine heater pad requires little mechanical ability, before use, please wipe clean the dust on the surface to keep it dry, and peel off the paper backing from the oil pan heater pad and attach the pad to make it stick stronger..
Check Stock

Motorcycle Radiator Grille Guard Protective Cover For Kawasaki Ninja 250 Ninja 400 2018 2019 Kawasaki Z250 Z400 2019

  • ✔✔✔❶〖FITMENT〗►Kawasaki Ninja 250 2018-2019 ►Kawasaki Ninja 400 2018-2019 ►Kawasaki Z250 2019 ►Kawasaki Z400 2019.
  • ✔✔✔❷〖MATERIAL〗Made of aluminum alloy, the product has an elegant smooth black surface, which has been oxidized to add charm to your motorcycle..
  • ✔✔✔❸〖FUNCTION〗It can protect the engine from stone or gravel damage during driving, ensure long-term use of the engine, and reduce maintenance costs. In addition, because of the protection of the radiator shield, you do not need to clean the engine, you only need to clean the shield regularly..
  • ✔✔✔❹〖DESIGN〗The grid hollow design can effectively reduce air resistance and make you feel the joy of speed..
  • ✔✔✔❺〖SERVICE〗This shop provides you with high-quality motorcycle accessories and also provides you with better services. We provide pre-sale consulting, after-sales service, product information tracking. You can contact us by e-mail, we will reply you as soon as possible..
Check Stock

AtomOil Oil Additive and Protection | Nano Technology Car Engine Motor Treatment | Atomic Scale Protective Oil Treatment, 16 Oz. Bottle

  • ATOMIC SCALE PROTECTION: Formulated with nano-engineered additives, this treatment is the next generation in superior performance. It eliminates friction and wear by creating boundary lubrication that eradicates direct surface-to-surface contact. Includes one 16 oz. bottle..
  • SUPERIOR HIGH-TEMP PERFORMANCE: Experience engine thermal stability unlike any other. AtomOil's engine oil treatment is superior to other treatments for motor oils with a stellar performance in high-temperature environments..
  • EXTENDS SERVICE INTERVALS: Extend the service life of your engine. Using this treatment during an oil change promotes energy savings and protection of critical engine parts. Add the entire bottle to 4-5 quarts of all varieties of mineral and synthetic engine oils..
  • PROTECTS DURING INITIAL STARTS: Designed with early film activation for unprecedented surface penetration, staying power, and protection from wear damage incurred during cold starts. This engine oil stabilizer ensures every mechanism performs at its peak..
  • PREVENTS VARNISH, SLUDGE, & CONTAMINANTS: With a durable protective t....
Check Stock