Categories

Best Engine Vacuum Hose

UTSAUTO Silicone Vacuum Tubing Hose High Performance 6.6 Feet (2M), ID 0.16\ (4MM) Silicone Vacuum Tubing Hose - Black

  • Silicone Vacuum Tubing Hose Inside Diameter: ID 0.16" (4mm), OD 0.39" (10mm) ,Wall Thickness: 3MM, Length: 6.6 Feet ( 2 Meter ) Per Roll.
  • Silicone Vacuum Hose Line Min temperature: -40 C. Max temperature: 220 C/428 F..
  • Vacuum Hose Work pressure: 0.3 to 0.9 MPA, Bursting Pressure: 2MPA..
  • Made of high quality silicone material to ensure strength and durability.
  • Wide use: it applies to most cars trucks air or water transportation in the engine bay.
Check Stock

MECCANIXITY Vacuum Silicone Tubing Hose 5/32 1/4 5/16 1/2 ID 1/8 Wall Thick 5ft Black High Temperature for Engine

  • Silicone vacuum tube is mainly used in air and liquid transportation of engines. Also can be used to transport lubricating oil. It cannot be used as transmission oil hose. The thick wall design allows vacuum tubes to work in high-pressure environments.
  • Silicone vacuum hose, is in size of : 4mm/0.16-inch, 6mm/0.24-inch, 8mm/0.32-inch, 12mm/0.47-inch inner dia, 10mm/0.39-inch, 12mm/0.47-inch, 14mm/0.55-inch, 18mm/0.71-inch outer dia, 3mm/0.12-inch wall thickness, 1.5mm/5ft total length, -60°C to 200°C(-76°F to 392°F) working temperature.
  • Vacuum hose is made of high-temperature-resistant silicone material, which can be used to connect and replace all kinds of pipes in the high-temperature environment such as engine, etc. Vacuum hose is with aging resistance, good flexibility, smooth surface, not easy to deform, and good sealing performance.
  • Steps of installation: 1.Prepare a silicone vacuum tube of an appropriate size.
  • Please select a silicone vacuum tube of appropriate size, especially the inner diameter and outer diameter of the tube.
Check Stock

Mr. Gasket 8090 Red Flex-Braided Hose Sleeve Kit

  • Protects your engine hoses for added reliability.
  • Provides an affordable alternative to stainless steel.
  • Contains vacuum hose, fuel hose, heater hose and radiator hose.
  • Kit is complete with anodized aluminum hose clamp covers.
Check Stock

DASBET Car Vacuum and Fuel Pump Tester Gauge Kit, Fuel Pump and Vacuum Tester Gauge, Leak Carburetor Pressure Diagnostics

  • Function: The Carburetor Carb Valve Fuel Pump Pressure & Vacuum Tester Gauge Test Kit enables testing of the fuel delivery pressure to the engine to check for worn or defective parts in fuel pumps and vacuum systems.
  • Professional Tester Kit: Fuel Pump Pressure & VacuumTester Gauge Kit, Carburetor Test enables testing of the fuel delivery pressure to the engine to check for worn or defective parts.
  • Diagnose leaking valves, incorrect timing, leaky intake manifolds, and clogged mufflers. Fuel pump operating pressures up to 10 PSI (0.7 Bar), Pressure gauge 0-28 IN-Hg (0-70 cm-HG) vacuum and 0-10 PSI (0-0.7 kg/cm²) pressure.
  • Easy-to-use: Includes a variety of adapters ideal for most vehicles.
  • 4-inch (10.2cm) diameter pressure gauge with color-coded measurement scales, 1.2-inch (3cm) thickness with rubber side notches, easy to read and grip.
  • Extra-long rubber hose and 14mm/18mm manifold adapter.
  • Rubber hose 40 PSI (2.8 Bar) maximum working pressure.
  • Easy Storage: All the tools are well organized in a storage case for easy transportation, simple storage, and quick identification.
Check Stock

JDMON Oil Catch Can Tank Kit with Breather 300ml Aluminum Polish Engine Air Oil Separator Tank Reservoir Kit Universal (Blue)

  • 6061 Aluminum Durable Quality: JDMON oil catch can with breather is made of sturdy T6061 aluminum for enhanced strength and durability,not easy to be damaged and lasted for long time.Note: The hose can’t resist high temperature, you’d better purchase another rubber vacuum hose to meet your demand..
  • Increases Horsepower& Keep Engine Clean: This universal oil catch can catch the oil and moisture in the blow-by gas that causes carbon and sludge build-up in the intake system and the engine. It will prevent the dirt and oil from your intake system into your car engine which can keep the engine clean and preserve engine life..
  • Prevent Oil Leak: JDMON oil catch can kit is built-in o-rings which can prevent oil leak..
  • Easy to Use & Clean: This oil catch can set came with dipstick, measuring fluid level no need to open the can. The material of it is polished, so it’s easy to clean, no need any tools..
  • Package Includes: 1*300ml oil catch can, 1*hose,1*Breather Filter, Necessary Bracket & Screws as picture shows.
Check Stock

YSTOOL Radiator Pressure Tester Pneumatic Vacuum Type Purge Refill Kit Universal Automotive Cooling System Water Tank Leak Test and Coolant Fill Tool 28PCS Set with Adapters Gauge Black Case

  • ... pointer drops over time to confirm a system leak..
  • Vacuum coolant filler uses shop air to draw a vacuum, by using the connected coolant filling hose to extract new coolant and transfer it into the cooling system with no air pockets produced. Adding coolant in vacuum condition will not appear large cavitation, avoid engine warping and other damage. Coolant vacuum refill tool adopts superior brass manifold body with plastic cover, and 18" long rubber hose, brass parts for anti-corrosion and durability..
  • Normally, coolant pressure tester and refill kit takes about 10 mins to test leak and 5-10 mins to refill coolant. Simple time-saving operation. Also much cheaper than the maintenance cost or a new engine. Black blow-molded case makes for easy transportation, simple storage, and quick identification. This set is ideal for a variety of domestic and import vehicles. Suitable for Ford, Mercedes Benz, GM, Jeep, Oldsmobile, Pontiac, Buick, Chevrolet, Chrysler, Dodge, etc..
  • Thermometer uses stainless steel material, with scale range of 0 - 200℃(32 - 400℉). 21PCS color coded radiator adapters have the exact corresponding serial numbers and positions on the picture, and are equipped with detailed applicable models in instruction for easy reference. American a....
Check Stock

JEGS Electric Vacuum Pump Kit | Provides Between 18” - 22” Hg of Vacuum | Includes Vacuum Pump, Hose, Switch & Pigtail, Vibration Isolators, 10 Amp Fuse, 12 Volt DC / 84 Watt Relay, and Hardware

  • PROVIDES THE NECESSARY VACUUM FOR POWER BRAKES when the camshaft has been upgraded or the engine doesn’t supply more than 16” of vacuum.
  • MAINTAINS BETWEEN 18” - 22” Hg OF VACUUM for proper operation of power brake booster.
  • INCLUDES: Vacuum Pump, Hose, Switch & Pigtail, Vibration Isolators, 10 Amp Fuse, 12 Volt DC / 84 Watt Relay, and Hardware.
  • COMPACT DESIGN fits in most engine compartments.
  • EASY TO INSTALL with included instructions.
Check Stock

Actron CP7802 Vacuum and Fuel Pressure Tester Kit

  • Vacuum and fuel pressure tester is easy-to-read and has a 2-1/2 white face.
  • Checks the mechanical condition of the engine and vacuum control system function.
  • Diagnoses leaks in the intake manifold, manifold and head gaskets, piston rings, valves and vacuum lines.
Check Stock

Coolant Vacuum Refill Tool Kit Engine Cooling System Vacuum Purge & Refill Kit New Coolant Bleeder Kit with 4 Rubber Sleeves & 1 Universal Adapter Cone Plug (with Carrying Case) (4 Connectors)

  • ...UM TYPE COOLANT FILLING FUNCTION: Pneumatic vacuum coolant filler first sucks and forms a vacuum on the cooling system by using shop air, then draws coolant into the cooling system.(Need vacuum pump and not included in the kit) Add coolant in vacuum, there is no large air pocket and avoid warping or other damage in engine. Normally, it takes 5-10mins to refill the coolant, the exact time depends on the size of the tank. Easy to operate and save time.
  • WIDELY USAGE RADIATOR PURGE AND ANTIFREEZE REFILL TOOL: JIFETOR antifreeze filler kit includes a universal tapered rubber adapter, with MIN. diameter 1.5CM and MAX. diameter 5CM, fits for almost all types of vehicles. The adapter can replace the radiator cap to seal the cooling system, and connect with the quick coupler on coolant refiller to help to fill antifreeze..
  • WATER TANK COOLANT VACUUM REFILL: Plastic covered premium brass manifold body, equipped with brass fittings, anti-corrosion and durable. The index range of gauge is -30~0inHg (-76~0cmHg), and normally -25~-20inHg is right time to add coolant. 18" rubber resin material weave reinforced hose, featured with anti-corrosion, low fluid resistance, high bearing pressure, ensure durability and good air sealing. Also there is a 21" metal chain hook fo....
Check Stock

BTSHUB Fuel Pump & Vacuum Tester Gauge Leak Carburetor Pressure Diagnostics Tool Kit

  • Professional Tester Kit: Fuel Pump Pressure & VacuumTester Gauge Kit, Carburetor Test enables testing of the fuel delivery pressure to the engine to check for worn or defective parts.
  • Diagnose leaking valves, incorrect timing, leaky intake manifolds, and clogged mufflers. Fuel pump operating pressures up to 10 PSI (0.7 Bar), Pressure gauge 0-28 IN-Hg (0-70 cm-HG) vacuum and 0-10 PSI (0-0.7 kg/cm²) pressure.
  • Applications: This tester will test fuel pump pressure and all vacuum operated devices, 4 tests can be performed – Fuel pump pressure, fuel pump vacuum, carburetor intake manifold, and vacuum test.
  • Easy-to-use: Instruction manual included.
  • Includes a variety of adapters ideal for most vehicles.
  • 4-inch (10.2cm) diameter pressure gauge with color-coded measurement scales, 1.2-inch (3cm) thickness with rubber side notches, easy to read and grip.
  • Extra-long rubber hose and 14mm/18mm manifold adapter.
  • Rubber hose 40 PSI (2.8 Bar) maximum working pressure.
  • Easy Storage: All the tools are well organized in a storage case for easy transportation, simple storage, and quick identification.
  • Package Includes: 1x Gauge,1x 24-inch long rubber hose 40 PSI,1x brass cone adapter,2x plastic connector,1x 1/4" x18 male to 1/8" -27 female brass adapter,1x 1/8”-27....
Check Stock

ATPEAM Vacuum and Fuel Pump Tester Gauge Kit, Fuel Pump Pressure & Vacuum, Carburetor Intake Manifold, & Vacuum Test

  • ...nch (3cm) thickness with rubber side notches, easy to read and grip.
  • Extra-long rubber hose and 14mm/18mm manifold adapter.
  • Rubber hose 40 PSI (2.8 Bar) maximum working pressure.
  • Professional Tester Kit: Fuel Pump Pressure & VacuumTester Gauge Kit, Carburetor Test enables testing of the fuel delivery pressure to the engine to check for worn or defective parts.
  • Diagnose leaking valves, incorrect timing, leaky intake manifolds, and clogged mufflers. Fuel pump operating pressures up to 10 PSI (0.7 Bar), Pressure gauge 0-28 IN-Hg (0-70 cm-HG) vacuum and 0-10 PSI (0-0.7 kg/cm²) pressure.
  • Easy Storage: All the tools are well organized in a storage case for easy transportation, simple storage, and quick identification.
  • Package Includes: 1x Gauge,1x 24-inch long rubber hose 40 PSI,1x brass cone adapter,2x plastic connector,1x 1/4" x18 male to 1/8" -27 female brass adapter,1x 1/8”-27 male to 7/32" barbed brass fitting adapter,1x 1/8"-27 female to 3/8" male brass adapter,1x T-type 7/32" barded fitting adapter.
Check Stock

WYNNsky 10FT Vacuum Tubing Hose, 0.12'' (3MM) ID, 0.27'' (7MM) OD, High Temperature Silicone Material, -76℉ to 374℉, 60PSI Max Working Pressure Automotive Replacement Vacuum Hose

  • Application: WYNNsky vacuum hoses are quite an inexpensive and practical performance modification for most all types of vehicles..
  • Material: Manufactured from a high-grade silicone, these vacuum hoses facilitate superior temperature resistance, will last longer than rubber hoses, and won't deform, even under extreme conditions..
  • High Temperature: WYNNsky silicone vacuum hoses are ideal for cooling/heating and high-power forced induction applications. -76℉ to 374℉..
  • Hose Standard: 0.12'' (3MM) ID, 0.27'' (7MM) OD, 2MM wall thickness, 60 PSI Maximum pressure rating..
  • This silicone vacuum hose applies to general purpose air or water transportation in the engine bay, great for marine and industrial use, custom turbo or intercooler piping fabrication, DIY intake or radiator cooling system..
Check Stock

KDP Silicone Vacuum Hose Line, ID:0.39\(10MM) OD: 0.62\(16MM) Wall: 1/8\(3mm) 10 Feet Per Roll (3M) Blue 60 psi Air or Water Transportation

  • More Stable and Reliable: Made of penius silicone material to ensure it's strength and duability.It is strong, durable and flexible and it is quality tested to have long lasting performance..
  • High Pressure:This silicone vacuum hose has a reliable working pressure(0.3-0.9MPA) With 3+mm wall thickness, the vacuum line's burst pressure reachs to 26 MPA, which is good enough for most of automotive working condition.
  • High Temperature Resistance: Broad operation temperature from -220F TO 374F (-40C to 214C).. This vacuum silicone hose is ideal for wide temperature ranges, exlleant for automotive, reifrigeration, more..
  • It applies to general purpose air or water transportation in the engine bay.
  • KDP Vacuum Tube has multiple size options, 1/8" 5/32" 1/4" 5/16" 3/32".Pllease contact with us if you need other size..
Check Stock