Cylinder Leak Down Tester Kit,Automotive Engine Pressure Gauges Compression Test Leakage Detector Tool Set TU-21

  • Features: it is used to detect many common faults of the engine, such as piston ring wear, cylinder head crack, valve wear and cylinder head seal....
  • General accessories: It is very suitable for testing trucks and models with minimum clearance. Check the leakage of the four stroke engine..
  • How the leak tester works: once the leak tester is connected to one of the cylinders, compressed air (45-100 psi) enters the cylinder through an....
  • Easy to operate: remove the Schrader Valve and close the regulator before using workshop air. Install the hose on the cylinder, install the device on....
  • Package: 48cm recoil hose, 12mm and 14mm spark plug adapters, fixed connector M14 x 26mm, fixed connector M16 x 26mm, pressure+cylinder leakage gauge,....
Check Stock

ABN 8in Valve Spring Compressor, 3-6.5in Capacity, 6in Clearance – Small Overhead OVH Engine Repair Compressing Tool

  • EASY COMPRESSION: The ABN Valve Spring Compressor Small Overhead OVH Engine Repair Compressing Tool allows you to effortlessly disassemble and reassemble valves.
  • For correctly fitting, installing, and removing automotive valve springs.
  • FITS YOUR VEHICLE: Suitable for small to medium engines with overhead valves.
  • Works with a cylinder head on your workbench or any OVH head removed from the block.
  • 3-inch to 6.5-inch (7.6cm to 16.5cm) capacity with a 6-inch (15.2cm) throat clearance.
  • GRIP COMFORTABLY: Molded and cushioned handle that will give you more leverage.
  • Automatic locking and an easy grip handle help you to keep the tool in place and gain slip-free leverage.
  • EASY TO USE: Close the clamp until the fork-type portion of the tool fits snugly on the spring cap and the screw pivot is on the valve face, then screw in the threaded rod to compress the spring.
  • Automatically locks in place and is simple to release, lift, and compress.
  • BUILT TO LAST: Constructed from high-quality metal that eliminates tool flex.
  • Strong and adjustable cam-action works perfectly in line with the valve and can get into even the narrowest valve chambers.
Check Stock

53021077 Lifters replacement For 4.7 Dodge/Chrysler Lash Adjusters HLA Replaces Part # 53021077 5073596AA (16 Packs)

  • VALVE LAP TOOL HELPS YOU SEAT VALVES ACCURATELY: Use the ABN Drill Valve Grinding Tool Attachment Valve Lapping Set to properly fit and seat valves into your vehicle engine.
  • Correct surface irregularities and remove sub-surface damage on your new valves with these motorcycle valve lapping tool small engine tools to fit perfectly into the valve guide for a secure fit.
  • For use with fine grinding paste (not included).
  • PERFECT VALVE LAPPING CUP SIZES FOR YOUR NEEDS: 4 attachable suction plates are included with this valve seat lapper tool kit to make fitting and seating various valve sizes in your lawnmower, chainsaw, car, or motorcycle.
  • Includes 20mm (3/4 inch), 30mm (1-3/16 inch), 35mm (1-3/8 inch) and 45mm (1-3/4 inch) synthetic rubber suction cups that are oil and UV resistant.
  • FITS YOUR TOOLS: Small engine valve lapping kit includes a 5 inch rubber roller attachment that has two 8mm (5/16 inch) steel shanks to fit your drill and the included suction cups.
  • Electric drill attachment provides increased control and productivity with less user fatigue while you put the finishing touches on your tune-up.
  • EASY TO USE: Clean all carbon deposits off valve and valve guide.
Check Stock

A-Team Performance - Fabricated Aluminum Valve Covers with Gasket Coil Mounts - Compatible with GM LSX Black

  • Fabricated Aluminum Valve Covers with Gasket Coil Mounts BLACK.
  • Compatible With — Chevrolet Small Block V8 Gen. III/IV (LS Based) - 4.8 L / 293 in3, 5.3 L / 325 in3, 5.7 L / 346 in3 (commonly referred to as 350), 6.0 L / 364 in3, 6.2 L / 376 in3, and 7.0 L / 427 in3.
  • Fabricated Aluminum — Valve Covers With a Clean and Unique Aesthetic Racing Look From Strong Yet Lightweight 6061-t6 Aluminum.
  • Tall Height — Added Clearance for High-performance Valvetrain Set-ups. Mounting Hardware — Complete Kit Which Includes Everything for Installation in LS Engine Covers.
  • Specifications — Center Bolt Mounting Style, Billet Aluminum Mounting Surface, and One-piece O-ring Gasket Included.
Check Stock

Prokomon Cylinder Leak Down Tester,Compression Test kit -Engine Cylinder Dual Leakage Tester Kit Diagnostics Tool

  • ◇ FITS YOUR VEHICLE -- It is compatible with gasoline 4-stroke engines and 10mm,12mm,14mm or 18mm spark. As long your vehicle has a standard spark....
  • ◇ COMPARE CYLINDERS -- It best tests cylinder leak down and compression when comparing a suspect cylinder to a known good cylinder on the same....
  • ◇ EASY TO USE -- Remove the valve and turn the regulator off before applying shop air. Install the hose to the cylinder, the unit to an air supply,....
  • ◇ Designed to detect a variety of common engine faults. including: Worn piston rings, worn valves, cracks in cylinder walls and blown head gaskets.
  • ◇ Tester checks the amount of leakage in an engine cylinder & helps determine the source. Ideal for testing trucks & late model cars where clearance....
Check Stock

Anbull 7.5 HP 223cc Recoil Start Gas Engine Horizontal Shaft 3/4' x 2.43' Go Kart Gas Engine for Log Splitter Single Cylinder 4-Stroke Gas Engine Forced by Cooling OHV Motor EPA Approved

  • 【7.5HP High Performance Motor】Anbull 4 Stroke 7.5hp gas engine has a Max Output Power/Speed of: 5.5kW/4000RPM & Torque of 12.5Nm. Shaft Size: 3/4" Diameter, 3/16" Length. Keyway 5/16”-24 UNF. Compression Ratio of: 8.5:1. Bore x Stroke of: 70mm x 58mm. Valve Clearance (Cold) Intake: 0.05-0.10mm & Exhaust: 0.05-0.10mm..
  • 【Low Oil Sensor】The low oil shutoff functionality turns the engine off to prevent serious damage or failure when the gas engine at low oil level. Similarly, if the oil level is lower than required level when starting, it will not start..
  • 【Built-in Forced Air Cooling System】Transistorized Pointless (TCI) Ignition System, recoil start system and built-in forced-air cooling system keep the motor cool and delivers high reliability and durability operation..
  • 【Industrial Grade OHV Motor】Industrial grade OHV motor is equipped with higher combustion efficiency and allows your machine to run at higher speed..
  • 【EPA approved】 The horizontal shaft is mounted in the crankcase with dual ball-bearings, making this gas engine an ideal replacement for most standard engine configurations. The powerful gas engine features a durable cast iron cylinder making it the perfect replacement engine for a go-kart, log-splitter and dozens of other....
Check Stock

A-Premium Engine Valve Cover Kit, with Gasket & PCV Valve & Spark Plug Seal Compatible with 2006-2017, Nissan Armada Pathfinder Titan NV2500 NV3500, INFINITI QX56, V8 5.6L, 13264ZE01A 13264ZE00A

  • [Vehicle Fitment]: Compatible with Nissan Armada 2006-2015 ✔ Pathfinder 2008-2012 ✔ Titan 2006-2015 ✔ NV2500 2012-2017 ✔ NV3500 2012-2017 ✔ INFINITI QX56 2007-2010 ✔ V8 5.6L (Engine Code: VK56DE).
  • [Perfect Solution]: This engine valve cover and gasket kit is best professional solution for nissan v8 4-stroke 5.6l 5552cc engine problem (such as oil leaks, engine bay smoking, burning oil smell, misfiring engine, etc), and restore PVC valve operation, also saves you hundreds of dollars from oem part..
  • [Package Contents]: 2 x Engine Valve Cover Assembly for Left Right Head (with PCV Valve and Spark Plug Seals), 2 x Valve Cover Gaskets (All Parts Comes with 1-Year Warranty).
  • [OE Part Number]: 13264-ZE01A, 13264-S010, 13264-ZE00A, 13264-S000, 13270-7S000. Although this valve cover is not genuine nissan parts, the function and look are same as the factory oem part on armada, titan, pathfinder, nv2500, nv3500. the v8 5.6l naturally aspirated engine valve cover installation is not complicated and can be replaced directly without any special tools.
  • [Customer Support]: 1 Year Unlimited-mileage Quality Guarantee.
  • With being sturdy and brand-new, this 5.6l gasoline engine valve cover kit is the ideal replacement. please get in touch with us at any time if ....
Check Stock

A-Premium Engine Valve Cover Kit, with Gasket, Compatible with Chevy Cruze 2010-2016, Sonic 2012-2018, Trax 2013-2020, Aveo 2009-2011, Aveo5 2009-2011, L4 1.6L 1.8L, Replace # 55558673 55564395

  • [For L4 1.8L Engine] Compatible with Chevrolet Chevy Cruze 2010-2016 ✔ Cruze Limited 2016 ✔ Sonic 2012-2018 ✔ Trax 2013-2020 ✔ Saturn Astra 2008-2009 ✔.
  • [For L4 1.6L Engine] Compatible with Chevrolet Aveo 2009-2011 ✔ Aveo5 2009-2011 ✔ Pontiac G3 2009-2010 ✔ Pontiac G3 Wave 2009 ✔.
  • [Package Details] 1 x Engine Valve Cover with PCV Valve, 1 x Valve Cover Gasket, 1 Set of Bolts (with 1-Year Warranty, and Replace for GM # 55558673, 55564395).
  • [Perfect Solution] This engine valve cover kit is best professional solution for Cruze/Sonic/Trax/Aveo's the engine problem (such as oil leaks, engine bay smoking, burning oil smell, misfiring engine, etc), and restore PVC valve operation, also saves you hundreds of dollars from O-E-M part.
  • [Customer Support] With being easy to install and brand-new, this valve covers is the ideal engine cover which comes with 1-year warranty. Please get in touch with us at any time if the product has any quality issues, such as damage or isn't appropriate for your automobile..
Check Stock

CHEINAUTO Cylinder Leak Down Tester Engine Compression Diagnosis Tester Kit Dual Pressure Gauges Engine Compression Leakdown Detector Leakage Test Set for Gasoline Engine

  • 【UNIVERSAL FITMENT】Suits all local and imported cars and trucks, ideal for testing trucks and car models where clearance is minimal. check the....
  • 【FEATURE】Designed to detect a variety of common engine faults such as worn piston rings, cylinder head cracks, worn valves and blown head gaskets.....
  • 【WORKING PRINCIPLE OF LEAKDOWN DETECTOR】 Once the leakage tester has been connected to one of the cylinders, compressed air (45-100psi) is fed....
  • 【PROFESSIONAL LEAKAGE DETECT FUNCTION】: This cylinder leak tester checks the amount of leakage in an engine cylinder and helps determine the....
  • 【EASY TO USE】Remove the Schrader valve and turn the regulator off before applying shop air. Install the hose to the cylinder, the unit to an air....
Check Stock

A-Premium Engine Valve Cover, with Gasket & Oil Filler Cap, Compatible with 2011-2021, Chevy Cruze Sonic Trax Volt, Buick Encore, Cadillac ELR, 1.4L Turbo Gas, Replace # 55573746 25198498 264-968

  • [Vehicle Fitment]: Compatible with Chevrolet (Chevy) Cruze 2011-2016 1.4L ✔ Cruze Limited 2016 1.4L ✔ Sonic 2012-2020 1.4L ✔ Trax 2013-2021 1.4L ✔ Volt 2011-2015 1.4L ✔ Buick Encore 2013-2021 1.4L ✔ Cadillac ELR 2014-2016 1.4L ✔.
  • [Perfect Solution]: This engine valve cover and gasket kit is best professional solution for gm small car ecotec 1.4l turbo engine problem (such as oil leaks, engine bay smoking, burning oil smell, misfiring engine, etc), and restore PVC valve operation, also saves you hundreds of dollars from oem part.
  • [Package Details]: 1 x Engine Valve Cover Assembly (with PCV), 1 x Main Valve Cover Gasket, 1 x Yellow Oil Filler Cap, A Set of Valve Cover Bolts.
  • [OE Part Number]: 25198498, 25198874, 25198877, 25203036, 55573746, 264-968. Although this valve cover is not genuine GM parts, the function and look are same as the factory oem part on cruze, sonic, trax, volt, encore and elr. the 1.4L engine valve cover installation is not complicated and can be replaced directly without any special tools.
  • [Customer Support]: 1 Year Unlimited-mileage Quality Guarantee.
  • With being sturdy and brand-new, this 1.4l engine valve cover kit is the ideal replacement. please get in touch with us at any time if the product has any quality issues,....
Check Stock

Tektall LS Smooth Cast Aluminum Valve Covers with Coil Mounts and Covers Compatible with Che-vy Small Block SB V8 293 325 376 427, Black

  • 【Top Quality】 Made of Highly durable Cast Aluminum . High sealing performance gasket and silicone sealant to stop the oil leak. Precisely engineered make your car run powerfully and stably.
  • 【Fitment】 Compatible with Che-vy Small Block SB V8 293 325 376 427, Black. Accepts Gen 1 (Delco D580) and Gen 5 (Delco D510C/ 81015) LS style ignition coils.Valve Cover Base Mounts to LS1, LS2, LS3, LS6, and LS7 Engines..
  • 【Function】 Cast aluminum valve covers are a great way to improve the look of your LS engine, without any radical changes to its configuration..
  • 【Features】 The base has a tall internal height to allow for added valvetrain clearance and no brackets required. It also features a baffled stock-style ventilation set-up. The coil cover features cut-outs for routing the wiring harness and spark plug wires and comes with a classic, finned top..
  • 【Package Included】 Coil Cover Mounting Hardware, Coil Hardware & Spacers, Low-profile Oil Fill Caps and Valve Cover Gaskets.
Check Stock

BILT HARD 301cc 10HP Gas Powered Engine, Horizontal 4 Stroke OHV Gas Motor, Shaft 1" Diameter, 3.48" Length, 1/4" Keyway, Replacement for Go Cart, Compressor, Log Splitter, Pressure Washer

  • ... Engine has a Max Output Power/Speed of: 4.3kW/3600RPMs & 8.85Ft-Lbs/12.4Nm of Torque @2500RPMs. Counterclockwise Rotating PTO Ball Bearing Support Shaft Dia. of: 3/4" x 2.43”, 3/16" Straight Keyway & 5/16”-24 UNF End Tapered. Compression Ratio of: 8.2:1, Bore x Stroke of: 74.5mm x 48mm. Valve Clearance (Cold) Intake: 0.05-0.10mm & Exhaust: 0.05-0.10mm. Universal 4 Bolt Mounting Pattern: 6.38"/162m x 3.17"/80.5mm..
  • SUPERIOR PRODUCT INTEGRITY - The engine is designed to ensure the operator's safety.
  • Always operate the machine according to directions in the user manual, always wear the appropriate ANSI standard hand and eye protection (ENGINE OIL NOT INCLUDED, MUST ADD UPON UN-BOXING).
  • The engine runs on Unleaded 87+ octane Gasoline (10% or less ETHANOL recommended).
  • SAFETY & PROPER USE - The engine is designed to ensure the operator's safety. Always operate machine according to directions in the user manual, always wear the appropriate ANSI standard hand & eye protection (ENGINE OIL NOT INCLUDED, MUST ADD UPON UN-BOXING). ONLY use this engine for approved applications..
Check Stock

OEMTOOLS 25029 Flexible Air Valve Holder Hose 14 Length Fits 14mm and 18mm Spark Plug Holes Valve Spring Tools for Air Compressor

  • SAVE TIME AND PREVENT STRESS: Replace valve springs or valve stem seals without removing the engine head.
  • FITS MOST VEHICLES: This air holder fits engines with either an 18mm or 14mm spark plug socket size, making it compatible with the most common....
  • MORE ROOM TO WORK WITH: Easily connect the valve hose to the spark plug hole with the flexible 14 inches of hose, which is longer than some....
  • THE EASY WAY TO DO ENGINE VALVE WORK: While attempting a valve spring removal or valve seal removal, use this valve holder tool to blow compressed air....
  • AN ESSENTIAL PART OF A VALVE SPRING KIT: Unless you are a hobbyist wanting to take apart an engine head for educational or recreational reasons, air....
Check Stock