4 Sets DS18B20 Temperature Sensor Module Kit with 1 m/ 3.2 Ft Waterproof Digital Stainless Steel Probe -55 to +125 Degrees Celsius, Compatible with Raspberry Pi

  • Parameter information: power supply: 3.0V - 5.5V.
  • Output : red (VCC), yellow (DATA), black (GND).
  • What you get: you will get 4 DS18B20 temperature sensors, 4 adapter modules and 4 female to female jumper wires.
  • The adapter module has a pull-up resistor, which can be directly connected to the GPIO for Raspberry Pi without an external resistor.
  • DS18B20 temperature sensor: the size of stainless steel housing is approx. 6 x 50 mm/ 0.2 x 2 inch, and the digital temperature thermal cable has a total length of approx. 1 m/ 39.4 inch, which is long enough to meet your needs.
  • Quality material: the probe is made of quality stainless steel material, which is waterproof, moisture-proof and not easy to rust, so as to prevent short circuits.
  • Wide application: this DS18B20 temperature sensor is compatible with Raspberry Pi, and is widely applied in temperature monitoring of cable trench, boiler, zer, agricultural greenhouse, clean room, etc..
Check Stock

Timing Belt Water Pump Kit fits with Valve Cover Gasket for 1996-2001 For Acura Integra, 1997-2001 For Honda CR-V 1.8L 2.0L B18B1 B20B4 B20Z4 L4 DOHC 16V

  • Fits for:1996 1997 1998 1999 2000 2001 For Acura Integra, 1997-2001 For Honda CR-V 1.8L 2.0L B18B1 B20B4 B20Z4 L4 DOHC 16V.
  • for Engine:B18B1 B20B4 B20Z2 DOHC (Note: "B18B1" - Non-VTEC).
  • Guaranteed to fit and meet the specifications of the OE parts being replaced.
  • Premium quality tensioner and idler pulleys help to assure correct tension and operation.
  • INTERCHANGE PART NUMBERS - TBK184,WP4009,VC4011,WPHO009,VCHO011,14400-P7J-004,14510-P30-003,19200-P75-003,TCKWP184,VS50362R,ES72132,ES72179,TS26184,ITM184,135-1400.
Check Stock

ARP 2085404 Main Stud for Acura

  • Fit type: Fits Acura Honda Integra B18 B18A B18B B20B 208-54.
  • Package Dimensions: 5.588 H x 22.098 L x 10.414 W (centimetres).
Check Stock

Makita Brush Set (Makita 9565CV, 9564CV, PW5001C)

  • Powerful 13.0 AMP motor delivers more output and variable (2,800 - 10,500) RPM for the most demanding applications.
  • SJS technology is a mechanical clutch system that minimizes motor and gear damage.
  • Variable speed control dial enables user to match the speed to the application.
  • Electronic controller provides constant speed control which automatically applies additional power to the motor to maintain speed under load.
  • Electronic controller provides soft-start which is designed to suppress start-up reaction for smooth start-ups and longer gear life.
Check Stock

Cell9102 Replacement Porter Cable 18V Battery and Charger Starter Kit, PC18B Lithium Battery and Charger PCXMVC Compatible with Porter Cable 18V Cordless Power Tools,Capacity Output 2.0Ah

  • The Cell9102 Advantage : Professional power tool battery manufacturing factory, with dozens of research and development team..
  • Ultra-High Capacity : This electric drill battery replacement for porter cable 18v battery weighs just 7.8 ounces but has a capacity of 2,500 mAh and use high-quality lithium-ion cells. No memory effect, 3 times cycle life than Ni-Cd battery..
  • Certified Safe : Cell9102's MultiProtect safety system ensures complete protection for you and your devices.And 100% replacement for Proter Cable 18 Volt PC18B PC18BL PC18BLX PC188 NiCd battery..
  • Performance : Performance : This Replacement 18Volt Li-ion Battery for Proter Cable PC18B high quality battery cell made by integrated microchip technology, built-in overcharge, over-discharge protection to extend battery life, batteries are CE FCC, ROHS certified, tested by manufacturer to match or exceed OEM products..
  • What You Get : Cell9102 Replacement Porter Cable 18V Lithium Battery PC18B and Charger PCXMVC Starter Kit, 30-day money back and our fan-favorite 18-month warranty and friendly customer service..
Check Stock

[Gulfcoast Robotics] V6 All Metal Hotend Black Edition w/Polished Titanium Heatbreak 12V Bowden

  • V6 All Metal Hotend features a maximum working temperature of up to 300° Celsius.
  • Pre-assembled and ready to install. Nozzle has been heat tightened for ease of use..
  • Polished Titanium Heatbreak has lower thermal conductivity, preventing clogs caused by heat creep..
  • EPCOS Thermistor uses fiberglass insulated leads for safe and secure high temperature 3D Printing..
Check Stock

Pro-Parts 78418 Temperature Fuel Control Knob (27mm Shaft) for MH18B Mr. Heater Big Buddy Portable Propane Heaters

  • New Replacement Prat 78418 temperature / fuel control knob for the MH18B Mr. Heater BIG Buddy Portable Propane Heaters..
  • This knob will ONLY fit BIG Buddy heaters with the serial number MHC748000097072 and HIGHER and all CURRENT models..
  • This knob has a 27mm OD shaft size. Please measure outside diameter of knob shaft for proper fit..
  • For use on Mr. Heater, Heat Star, and Enerco older MH18B BIG Buddy Portable Propane Heaters..
Check Stock

2 Pack 18 Volt 3.0Ah PC18B Battery Compatible with Porter Cable 18V Battery Ni-Mh PC188 PC18B PC18B-2 PC18BLEX PCC489N PCMVC PCXMVC Cordless Power Tools Battetry

  • Battery Type: Ni-Mh | Battery Voltage: 18V | Battery Cpacity: 3.0Ah | Battery Wattage: 54Wh | Quantity: 2 x Replacement for PC18B battery.
  • Replacement for Porter Cable 18V battery pc18b pcc489n pc18bl pc18blx pc18blex.
  • Compatible with all Porter Cable 18V cordless power tools and replacement for porter cable 18 volt pcmvc pcxmvc charger.
  • Top A Grade Battery cells, built in mulitple protection system, safeguard features automatic overload cut-off, against overcharging, over discharge, over current, provides short circuit protection and steady voltage circuit.
  • Products are CE / RoHS certified,tested by manufacturer to match OEM products. High quality capacity battery for longer running time..
  • 30 days money back or free exchange. Worry-free 12 months. We support 24*7 hours prompt after-sales consultation. Please contact us if you have any question.
Check Stock

Pilot Assembly For Portable ODS Mr.Heater Big Buddy MH18B MH9B MH9BX and Dewalt Small Propane Heater Parts

  • Part numbers: 78422 ,F278527, F273401, 73404..
  • For Mr.Heater, Heat Star and Enerco MH9B & MH9BX MH18B Buddy Heaters..
  • This Product Pilot Assembly Compatible Dewalt Small Propane Heater.
  • Fits Mr Heater: MH9B(2001-2008), MH9BX (2009-current),Heat Star and Enerco MH18B Buddy Heaters..
Check Stock

CNCEST Outboard Boat Motor Engine Inflatable Boat Fishing Boat Engine Power for Sailboats Small Yachts

  • 【2 Stroke 3.5HP Outboard Motor】- VONZOER 2 Stroke 3.5HP Outboard Motor, superior engine with water cooling CDI system to improve the reliability of the whole machine. Fuel saving, quick start, strong horsepower, low noise, superior performance, environmental protection, durable and compact structure, forward design..
  • 【Wide Applications】- VONZOER outboard boat motor is great for inflatable boats, small yachts, fishing boats and sailboats or used as an auxiliary trolling motor. It is suitable for both saltwater and freshwater..
  • Full throttle perating range: 4000-5000r/min.
  • Recommended fuel: Regular unleaded gasoline.
  • 【Warm Note】- Please add gear oil to the gears before use the motor and replace gear oil after the run-in period(10 hours). Our outboard motor doesn't with gear oil, please prepare it by yourself.
Check Stock

Genie Motor Starting Capacitor 18004-B 220VAC Genie Starting Capacitor 18004B

  • Production Name:Motor Start Capacitor, Volume: 53-64 MFD, Withstand Voltage: 250V AC 50/60 Hz, Shape: Round.
  • US style and professinal start capacitor for single phase motor, no PCBs inisde.
  • OverView Size: 1-7/16 x 2-3/4 in(37x70mm),Dia*Height.
  • Housed in a rugged phenolic resin case and strong body,PCB free.
  • Each pole has 2 pcs quick dsconnect terminals, convient for fast replacement.
Check Stock

49CC 2 Stroke Engine Motor Racing Complete Engine Motor Pull Start Motorized Bike Engine Kit for Mini Pocket Bike Scooter Dirt Bikes ATV Quad Motorized Bicycle (Minimoto Engine(B))

  • 【MAIN PARAMETERS 1】Cylinder Numbers: Single cylinder, Displacement: 49CC, Stroke: 2-stroke, Bore: 44mm/1.7'', Chain: 25h, Gas-oil Mix Rate: 25:1, Gear Box Reduction Rate: 3.1:1, Cooling: Air Forced Cooling, Spark Plug Size: L7T L7TC..
  • 【MAIN PARAMETERS 2】Start Way: Recoil pull start, new style recoil, easy to pull start.
  • Recoil Starter Material: New style easy pull starter.
  • Application: for most air cooled mini dirt bikes.
  • Package size: 34cm x 25cm x 15cm (13'' x 10'' x 6'').
  • 【COMPLETE ENGINE MOTOR】This Engine is complete with high performance cylinder head, plug, powder coated metal pull start, air filter and 14mm/0.55'' carburettor, balanced crank, balanced flywheel, ported piston windows, up-rated CVT transmission unit..
  • 【HIGH EFFICIENCY ENGINE】49CC mini motor air cooled racing engine capable of achieving 40mph dependant on user weight and terrain. 【MAIN PARAMETERS 1】Cylinder Numbers: Single cylinder,.
  • 【CUSTOMER HAPPINESS IS OUR PRIORITY】: We stand by and believe in our products 100%! If you have any problems, contact us and we will find a solution together!.
Check Stock

LEM Products W780A Stainless Steel Big Bite Electric #12-Meat Grinder (.75-HP)

  • Induction motor with a start and run capacitor (9 amps).
  • Permanently lubricated, 110V motor (60HZ).
  • Dimensions (fully assembled): 9" W x 19.5" L x 16" H.
  • Dimensions (motor only): 7.5" W x 15.5" L x 13" H.
  • Hole in head where pan is inserted is 2”.
  • Stainless steel head, auger and meat pan.
  • Includes: 1 meat stomper, 1 stainless steel knife, 1 stainless steel stuffing plate, 2 stainless steel plates (Coarse, Fine), 3 stuffing tubes.
Check Stock