Metal Roofing Screw: (250) 12 x 1-1/2' ZINC Hex ReGrip Sheet Metal Roof Screw. Sharp Point Metal to Wood siding Screws. 9/16' EPDM Washer.

  • 5/16" Hex Head - ~9/16" EPDM washer - .216" Shaft (#12) Width .625" - Length 1-1/2" Under Head.
  • ReGrip Screws designed to replace screws or nails that have failed, loose and cannot be tightened.
  • These screws should be used when replacing smaller nails or screws in roofing or siding projects.
  • Galvanized Screws are Grey in color due to the galvanizing process (no paint).
  • Due to error in Manufacturing Process you may receive these with a 1/4" Head and 5/8" EPDM washer..
Check Stock

Black Rubber Washer 3/4\ OD x 1/4\ ID x 1/16\ Thickness - EPDM Rubber Washers Flat Rubber Washers Round Rubber Washers (50)

  • Rubber Washer 1/4" ID X 3/4" OD X 1/16" Thick.
  • The EPDM washers contain superior aging qualities that will stand the test of time and always keep a leak proof seal. Resists damaging ultraviolet radiation from the sun as well as outdoor temperature extremes.
  • High quality rubber washers can be used in a number of applications with many types of fasteners.
  • When compressed against a material, the washer prevents water, air or anything else from coming in or out. This washer also excellent as a vibration damper..
Check Stock

#12x1-1/2' Metal to Metal Type #3 Galvanized/ZINC Hex Head Drill Point Metal to Metal Roofing Screws. 9/16' EPDM Washer

  • #12 Metal to Metal #3 Roofing Screws with Drill Point tip. 5/16" Hex Head, 9/16" Washer.
  • 250 COUNT Metal-to-Metal Galvanized Zinc roofing screws are a natural gray color & rust resistant.
  • Hex washer head, drill point roof screw with EPDM washer seal, seals roofing panel to screws..
  • #12 - 3 Metal to Metal Screw is designed for attaching roofing & wall panels to steel buildings.
  • Coarse Threaded Type 3 Screws generally used in thinner or lighter steel or aluminum products.
Check Stock

#12x1-1/2' Metal to Metal Type #5 (Galvanized/ZINC) Hex Head Drill Point Metal to Metal Roofing Screws. 9/16' EPDM Washer

  • #12 Metal to Metal #5 Roofing Screws with Drill Point tip. 5/16" Hex Head, 9/16" Washer.
  • 250 COUNT Metal-to-Metal Galvanized Zinc roofing screws are a natural gray color & rust.
  • Hex washer head, drill point roof screw with EPDM washer seal, seals roofing panel to screws..
  • #12 - 5 Metal to Metal Screw is designed for attaching roofing & wall panels to steel buildings.
  • Fine Threaded Type 5 Screws is designed to work in thicker materials rated from 3/8" to 1/2".
Check Stock

Metal Roofing Screws 250 12 x 2 ZINC/NO Paint Hex ReGrip Sheet Metal Roof Screw Sharp Point Metal to Wood siding Screws.

  • #12 Sheet Metal ROOFING SCREWS.  Sharp Point ReGrip Screws. 5/16" Hex Head, ~9/16" Washer.
  • 250 COUNT Metal-to-wood roofing screws are galvanized and zinc coated to prevent rusting.
  • Hex washer head, sharp point roof screw with EPDM washer seal, seals roofing panel to screws..
  • Corrugated roofing and corrugated siding screws for pole barns, storage shed, shops, etc..
  • Galvanized Screw is Non-Painted and gets it's Color from the Galvanizing Process and is natural gray.
Check Stock

Mini Skater 200PCS Small Cross Flat Head Tapping Wood Screws with Oxide and Wax 4 Size Screws Assortment Kit (Black&Bronze,200pcs)

  • [COATED SCREWS] 2.5 mil of computer controlled powder coating apllied over zinc plating and chromate sealer. Resists harmful UV rays and chemical breakdown. Completely free of volatile organic compounds (VOC), and is entirely recyclable.
  • [TYPE A FASTENER] Designed for use in wood framed buildings.
  • [RESCUE SCREW] Used in retrofit applications in which existing screws have stripped/backed out & need to be replaced with a larger diameter.
  • [EPDM RUBBER WASHER] Head and washer face captures the washer even when drive at an angle & are designed to maximize Pull over strength.
Check Stock

Tuftex 847 1 White

  • DeckDrain #10, 1 inch long, 1/4-inch hex-head screw.
  • Tough EPDM washer helps form a water-tight seal.
  • Pre-drill 9/32-mm holes in TUFTEX panels before installation..
  • Estimate 3 boxes screws per every 10 panels. The number of screws may change based on your.
Check Stock

Woodford 22PX-4-PH Horizontal Freezeless Wall Faucet Provides Hot And Cold Water

  • Oval powdercoated die cast aluminum handle.
  • Stainless steel seat eliminates wire draw.
Check Stock

Stainless Steel Neoprene EPDM Sealing Washers 1/4 ID x 3/4 OD (100 Pcs) 18-8

Check Stock

Woodford Model 50010 Long Tee Key

  • 3/4" male hose thread nozzle - Stainless steel seat - eliminates wire draw.
  • EPDM packing to prevent leaking - Full circle operating threads on valve body and retainer.
  • No-lead solder - Standard "O" size seat washer.
  • Powder-coated, die cast aluminum handle - Optional Tee Key available (extra charge).
  • Adjustable polycarbonate wall flange-MAX PRESSURE-125 p.s.i.-MAX TEMPERATURE-120 Degree F.
  • Refer to the User Manual attached below in Technical Specification.
Check Stock

Rubber Washing Machine Hoses (10 Foot - Black) by Kelaro

  • 10 FOOT LONG, PAIR of Black Rubber Washing Machine Hoses. Suitable for Hot or Cold Water Connections..
  • FITS ALL WASHERS - Flexible Universal Washer Hose easily Connects to normal household Water Supply Lines in the Laundry room..
  • HIGH QUALITY EPDM rubber washers for reliable seal with faucets.
  • Perfect for Homeowner or Contractor Installation..
  • UPC/CUPC Approved, AB-1953 and NSF-61 Certified Lead Free.
Check Stock

Metal Roofing Screws 1000 10 x 1-1/2   Galvanized Hex Head Sheet Metal Roof Screw Self Starting Metal to Wood siding Screws EPDM Washer No Paint

  • #10 Sheet Metal ROOFING SCREWS.  Our metal roofing screws are galvanized for corrosion resistance..
  • 1000 COUNT Metal-to-wood roofing screws have a type 17 self-starting tip for easy installation.
  • Corrugated roofing and corrugated siding screws for pole barns, storage shed, shops, etc..
  • Hex washer head roof screw with EPDM washer seal, seals roofing panel to screws to prevent leaks..
  • The screw is Not Painted and is naturally a gray color due to the galvanizing process on the screw.
Check Stock

Woodford RK-17MH Wall Hydrant Repair Kit by Woodford

  • 3/4" male hose thread nozzle - Stainless steel seat - eliminates wire draw.
  • EPDM packing to prevent leaking - Full circle operating threads on valve body and retainer.
  • No-lead solder - Standard "O" size seat washer.
  • Oval, powder-coated, die cast aluminum handle - Optional Tee Key available (extra charge).
  • Adjustable polycarbonate wall flange-MAX PRESSURE-125 p.s.i.-MAX TEMPERATURE-120 Degree F.
Check Stock