Categories

Best Epe Foam Tube Extruder

Creality Ender 5 Pro Creative FDM 3D Printer Upgrade Silent Mainboard Metal Extruder Frame with Capricorn Bowden PTFE Tubing 220x220x300mm for Adult Designer Home and School Use

  • 【Creality Ender 5 Pro 3D Printer 】With three upgrade Features, V1.1.5 Silent Mainboard, Metal Extruder Frame, Premium PTFE Tube. Solid cube frame....
  • 【V1.1.5 Silent Mainboard】Ender 5 Pro Upgrade Motherboard CV1.1.5 Silent Mainboard with TMC2208 Driver, Marlin 1.1.8 and Bootloader installed,....
  • 【Metal Extruder Frame】The metal extruder have better stronger pressure to pushing filament into printer nozzle, and longer lasting heat, will not....
  • 【Premium PTFE Tube】Upgrade Capricorn Bowden PTFE Tubing, High Temperature Resistance-Heat, good flexibility, abrasion resistance, chemical....
  • 【Printing Support】With 1 year warranty, good customer service, if you have any question , please feel free to contact us, we will reply to you as....
Check Stock

Creality Upgrade Ender 3 Hotend, Assembled Extruder with Capricorn Bowden PTFE Tubing for Creality Ender 3 Pro/Ender 3 V2 with Silicone Cover×3, 0.4mm Ender 3 Nozzle×3 and 2 Pair Pneumatic Couplers

  • It's 100% Creality Original Upgrade Assembled Extruder Hotend..
  • Original Capricorn XS Serious Bowden PTFE tubing with lowest friction on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills..
  • Pluggable: the heating tube and temperature thermistor that from control box, connect them with terminal housing and pin. Then you could plug the hotend kit, easier to replace hotend kit..
  • With more terminal housing and pins as spare parts, in case fail installation and waste..
  • MK8 Extruder Hot End kit, white wire was temperature thermistor, braided wire was heating tube 24V40W..
Check Stock

Creality Official Ender 3 Extruder Upgraded and 1M Capricorn Bowden PTFE Tubing 1.75mm 3D Printer Accessories Kit with Bed-Level Spring & Tube Cutter, 4 in 1 Package for Ender-3 Series CR-10 Series

  • ✔️【Quality Assurance】Creality 100% official aluminum extruder is lightweight and strong, ensuring a more even feed rate over time as well as resisting wear. Removed pneumatic joint so as to increase gear density, it makes loading the filament easier and smoother. Our extruder kits have an adjustable bolt so that you can adjust the pressure of the extruder gear as needed..
  • ✔️【Original Capricorn PTFE Tube】Capricorn PTFE is well regarded as the highest quality PTFE tubing in all 3D printing. The tight tolerances make sure that the filament is lead directly to the hotend with as little room for error as possible between the extruder and the hot end..
  • ✔️【Great Value Spare Parts】4pcs Upgraded bed-level springs are made of high-quality spring steel, fatigue and heat-resistant, durable for use. They will allow you to print at a higher speed without worrying about any wobble. One PTFE cutter with an extra sharp razor is also included to ensure that the tube is cut flat on both sides..
  • ✔️【Easy To Install】DIY kit and you need to assemble by yourself. The full installation kit for the extruder is include....
Check Stock

CITYLE 2023 Upgrade 16ft 1500lbs Basketball Tranpoline for Adults Hold 8-9 Kids【ASTM CPC CPSIA Approved】 Outdoor Tranpoline for Backyard Family Christmas with All Basical Accessories+ 2 T-Hook

  • 【Safety First】Safety is the top priority of jumping happily. 14mm thick EPE foam safety padding also helps to avoid injuries. 72 inches height complete trampoline safety enclosure is designed to protect the user of your trampoline when bouncing. The foam sleeve prevents kids from hurt when hit the trampoline frame..
  • 【1500LBS Weight Capacity】16ft trampoline with basketball hoop designed with solid structure, which makes sure the 1500lbs large weight capacity. 6 U-shaped legs provide 12 balanced points to increase the stability of the trampoline. Upgraded T-shaped joint tube ensures the tight connection of the trampoline structure..
  • 【Safety Enclosure Net】Trampoline for adults/kids used PE material dense enclosure net. Safety enclosure net perfectly attached to the steel tubes which filled with EPE soft foam, it also eliminates gaps between the mat and net to prevent injuries. The double lock enclosure zipper design increased the safety of the trampoline..
  • 【Perfect Bouncing Experience】Outdoor trampoline is wrapped with 108 sturdy galvanized springs, which are flexible and can hold high pressure. Those springs c....
Check Stock

CR-10S 3D Printers Original Replacement Parts/Accessories Full Assemble MK8 Extruder Hot End Kits with Nozzle 0.4mm /0.2mm /0.3mm /0.5mm fit for Creality 3D Printing Printer CR-10 CR-10S S4 S5

  • Creality CR10 Extruder,100% ORIGINAL CREALITY 3D PRINTING PRINTERS PARTS /ACCESSORIES AND WITH HIGH QUALITY.
  • MAIN MATERIAL OF CR10 EXTRUDER IS ALUMINUM ALLOTY /STANIESS STEEL/BRASS.
  • CREALITY CR10 EXTRUDER CAN WORK WITH DIFFERENT SIZE MK8 NOZZLE: 0.2MM 0.3MM 0.4MM 0.5MM 0.6MM 0.8MM 1.0MM NOZZLE.
  • MK8 CR10 EXTRUDER HOT END KITS,WHITE WIRE WAS TEMPERATURE THERMISTOR, BLACK WIRE WAS HEATING TUBE 12V 40W..
  • TIP OF NOZZLE, ALUMINUM HEATING BLOCK, THROAT PIPE (BUILT-IN TEFLON).
Check Stock

Upgrade 3D Printer Accessories with All Metal Extruder Feeder, Capricorn Bowden Tubing, Pneumatic Couplers, Bed-Level Springs for Creality Ender 3/Ender 3 Pro/Ender 5 Pro/Ender 5 Plus Ender 3 Upgrades

  • 3D Printer Extruder – Instantly provide improved print quality and reduce filament slipping by firmly grasping the filament between two threaded wheels locked together. No more skipped steps when extruding at high speeds or after retractions. Print faster with this superior design, which is able to feed much more filament into the hotend in the same period of time than stock plastic extruders..
  • 100% Original Capricorn XS Bowden Tube for 1.75mm filament – Capricorn ptfe tube is regarded as the highest quality PTFE tubing in all of 3D printing. The tight tolerances make sure that the filament is lead directly to the hotend with as little room for error as possible between the extruder and the hotend. It is rated for withstanding the highest temperature in the market which is perfect for printing filaments such as PLA, PETG, ABS, Nylon. Fits for 1.75mm 3d printer Filament..
  • Creality Die Springs – Those springs are extra firm and help to hold the bed level for longer while being more resistant against wearing out and loosing compression. Level the bed once and it should hold for more prints with these high performance stiff springs. PC4-M6 & PC4-M10 pneumatic fittings are also included for replacement use on any stock creality hotends..
Check Stock

Creality Ender 5 Pro 3D Printer Upgrade Silent Motherboard and Metal Feeder Extruder with Capricorn Bowden PTFE Tube

  • 【Upgraded V4.2.2 silent Mainboard】Ender 5 pro Upgrade Motherboard Silent Mainboard with TMC2208 Driver.
  • 【Metal Extruder Frame】Creality Ender 5 Pro 3D Printer is a highly durable metal extruder . This feature provides stronger pressure while pushing filament through the 3D Printer's nozzle.
  • 【Premium PTFE Tube-High】The Capricorn Bowden PTFE Tubing has a 1.9mm ± 0.05mm inner diameter, reducing any excess wiggle room and preventing the filament from buckling inside of the tube.
  • 【Cube Frame 3D Printer】Ender 5 Pro has a rigid extruded aluminum cube frame, making it very sturdy when assembled properly, which goes a long way to increasing print quality.
  • 【1-year warranty】We have equality warranty and provide after-sale customer service for the product. If any quality issue, Please feel free to contact us via Amazon, we will offer professional instructions and solutions timely..
Check Stock

ENOMAKER Upgrade All Metal Extruder Kits Rotary Feeding Knob 1M Capricorn Bowden Tubing 4 Hot Bed Leveling Spring Pneumatic Fitting 3D Printer Kits

  • 【All Metal MK8 Bowden Extruder Kit】The grey extruder feeder drive is made of high quality aluminium alloy, with stronger and adjustable extrusion....
  • 【1M Capricorn Bowden Tubing】Premium XS series PTFE tube for 1.75mm filament,low frition,heat resistant to 300°C, auti-carbonize, with extremely....
  • 【Upgrade Bed Leveling Springs】Yellow compression mould die springs, length 25mm, it is longer and have more adjustment range,stiffer than the....
  • 【Rotary Feeding Knob】Easier and smoother to load filament without worrying about it scraping or breaking..
  • 【Compatible】for all-metal MK8 extruder feeder drive 1.75mm. Such as Ender 3/Pro/V2/Max,Ender 5/Pro/Plus,CR-10 Series, CR-10S(Excludes 10s pro and....
Check Stock

Creality Original 3D Printer Extruder Assembled MK8 Hot End Sprinkler Kit for Ender 3 / Ender 3 Pro with Aluminum Heating Block, 1.75mm, 0.4mm Nozzle

  • ENDER 3 EXTRUDER is 100% ORIGINAL CREALITY 3D PRINTINGE PRINTERS PARTS /ACCESSORIES AND WITH HIGH QUALITY, WE JUST CONFIRM IT WORKS WITH CREALITY ENDER 3 3D PRINTERS. OTHERS BRANDS WE DO NOT TEST IT..
  • 5 PIECES 0.4MM 3D PRINTERS NOZZLES AS GIFT..
  • ENDER 3 EXTRUDER HOT END CAN WORK WITH DIFFERENT SIZE MK8 NOZZLE: 0.2MM 0.3MM 0.4MM 0.5MM 0.6MM 0.8MM 1.0MM NOZZLE.
  • MK8 EXTRUDER HOT END KITS,WHITE WIRE WAS TEMPERATURE THERMISTOR, BLACK WIRE WAS HEATING TUBE 24V 40W.
  • TIP OF NOZZLE, ALUMINUM HEATING BLOCK, THROAT PIPE (BUILT-IN TEFLON).
Check Stock

Toothpaste Tube Squeezer Dispenser Multifunctional Tube Holder Rotate Plastic Squeezer Rollers Tube Manual Extruder Clip Seat Bathroom Toothpaste Rack for Facial Cleanser Cosmetics Oily Extruder

  • Wide range of uses: toothpaste extruder is suitable for toothpaste, facial cleanser, cosmetics and other pipe products.
  • Selected material: ABS material is used for toothpaste extruder, which is heat-resistant, easy to clean, and can be used at ease.
  • Refuse to waste: our toothpaste extruder can save up to 35% of toothpaste, which is usually wasted in toothpaste tubes and other tube products.
  • Exquisite design: beautiful shape, smooth lines, simple and generous overall, delicate handle, not easy to slip.
  • Easy to use: toothpaste or other pipe materials are inserted parallel to the mouth of the rotary rod, and then the rotary rod is inserted into the....
Check Stock

Amarine Made Adjustable Size Life Jacket/Personal Floatation Device for Boat Buoyancy Aid Sailing Kayak Fishing Life Jacket Vest-D90 (Red/Gray)

  • Foam Material: EPE ,Detachable EPE Foam Plastics.
  • Multi-Pockets can hold almost everything you need for sailing, fishing and Kayak..
  • Lightweight Foam with inner mesh lining for coolness and wearability..
  • Universal Adult Size Fits for the person's weight about 75kg.
Check Stock

Giantex 4'x10'x2 Gymnastics Mat Folding Panel Thick Gym Fitness Exercise (Multicolor), 4'x10'x2

  • Large Exercise Area: 4'x10'x2" gymnastic mat is ideal for multiple exercise, not only for gymnastics but also for pilates, stretching, yoga, martial arts, day care activities and many other general exercise, all in one mat..
  • EPE Foam and PU Leather to Provide More Comfort: Filled with thick and high-density EPE foam, the mat is highly resilient and soft enough to provide a safe space for beginners to learn their first moves..
  • Space Saving Folding Design and Easy Carry Handle: When you are finished using it, the whole mat can be folded in four for storage. No matter if you store it laterally or vertically against the wall, it will save you valuable space..
  • Fit More Occasions: Our folding gymnastics is made from eco-friendly PU cloth and high-quality EPE foam, with our gymnastics mat, it will ease the pain for any hard falls, also it can reduce injury rate when you are doing exercise..
  • Fast Shipping and 100% Excellent Customer Service: We will arrange the delivery immediately after you place the order. If you have any questions or complaints, please feel free to contact our customer service staff..
Check Stock

50 Pack Cushion Foam Pouches HommyPrefer 12 x 12 Foam Packing Sheets 1MM Thickness Cushion Wrap Sheets Moving Supplies for Moving Shipping Packing Storage

  • 【Good Cushioning Effect】Premium Foam Sheets have excellent strength, flexibility, tear resistance and shock absorption performance, making it easy....
  • 【High Quality EPE Material】Cushion Foam Pouches are made of expanded polyethylene foam (EPE). Using high-grade materials, which can be adjusted....
  • 【Protect Your Valuables in the Move】50 Pack 12" X 12" Cushion Foam Pouches (Upgrade: 1mm Thickness), better quality than others. As a wrapping....
  • 【Foam Pouches for Packing-Features】The foam material is soft and smooth, they can protect the goods from scratches during transport. Maintain your....
  • 【100% Satisfaction After-sale Service】If you are not satisfied with your purchase for any reason, please feel free to reach our friendly customer....
Check Stock