Categories

Best Epoxy Structural

West System 655-8 G/flex Epoxy Adhesive, two 4.5 fl oz.

  • EXCELLENT ADHESION adhesion to hard-to bond woods. This toughened, versatile, thickened epoxy is for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. A bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. Makes structural bonds that can absorb the stress of expansion, contraction, shock, and vibration..
  • IDEAL FOR BONDING dissimilar materials. Mixed at a 1:1 ratio, this 2-part epoxy gives you 46 minutes of pot life at 72°F and an open (working) time of 60-75 minutes. It reaches an initial cure in 3 to 4 hrs, workable cure in 7-10 hours, and full cure in 24 hours..
  • OFFERS GREATER FLEXIBILITY than traditional epoxies or polyester resins. Yet it is much stiffer than adhesive sealants. With a modulus of elasticity of 150,000 PSI, this epoxy bonds tenaciously to a metals, plastics, glass, masonry, and fiberglass..
  • BONDS MANY MATERIALS including dissimilar ones. G/flex has a superior grip so that it can be used to bond to metals, plastics, glass, masonry, and fiberglass. G/flex is ideal for repairs to aluminum boats and polyethylene and ABS canoes and kayaks. It can also be used to wet out and bond fiberglass tapes and fabrics..
Check Stock

G/Flex 655-1 1 oz syringe

  • G/flex Thickened Epoxy Adhesive is a toughened, versatile, 2-part epoxy for permanent waterproof bonding of plastic, fiberglass, ceramics, metals, damp and difficult-to-bond woods.
  • Makes structural bonds that can absorb the stress of expansion, contraction, shock, and vibration..
Check Stock

RTG Wood Rot Repair Epoxy (Quart)

  • Clear, two-part, liquid epoxy treatment penetrates deeply to stabilize, harden, & seal damaged wood..
  • 100% waterproof epoxy restores the structural integrity and original strength of the wood..
  • Once cured, may be sanded lightly then primed & painted, or varnished..
  • No VOCs, no odor, and suitable for interior and exterior use..
  • Available in Pint, Quart, and Half-Gallon Kits. Each kit contains Part A (resin), and Part B (hardener)..
Check Stock

WEST SYSTEM - 655-2QT West System 655-2 QT G/flex Epoxy Adhesive, two 1 qt

  • EXCELLENT ADHESION adhesion to hard-to bond woods. This toughened, versatile, thickened epoxy is for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. A bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. Makes structural bonds that can absorb the stress of expansion, contraction, shock, and vibration..
  • IDEAL FOR BONDING dissimilar materials. Mixed at a 1:1 ratio, this 2-part epoxy gives you 46 minutes of pot life at 72°F and an open (working) time of 60-75 minutes. It reaches an initial cure in 3 to 4 hrs, workable cure in 7-10 hours, and full cure in 24 hours..
  • OFFERS GREATER FLEXIBILITY than traditional epoxies or polyester resins. Yet it is much stiffer than adhesive sealants. With a modulus of elasticity of 150,000 PSI, this epoxy bonds tenaciously to a metals, plastics, glass, masonry, and fiberglass..
  • BONDS MANY MATERIALS including dissimilar ones. G/flex has a superior grip so that it can be used to bond to metals, plastics, glass, masonry, and fiberglass. G/flex is ideal for repairs to aluminum boats and polyethylene and ABS canoes and kayaks. It can also be used to wet out and bond fiberglass tapes and fabrics..
Check Stock

RTG Wood Rot Repair Epoxy (Half-Gallon)

  • Clear, two-part, liquid epoxy treatment penetrates deeply to stabilize, harden, & seal damaged wood..
  • 100% waterproof epoxy restores the structural integrity and original strength of the wood..
  • Once cured, may be sanded lightly then primed & painted, or varnished..
  • No VOCs, no odor, and suitable for interior and exterior use..
  • Available in Pint, Quart, and Half-Gallon Kits. Each kit contains Part A (resin), and Part B (hardener)..
Check Stock

Polygem Liquid Concrete Repair (LCR) Kit Penetrating Injection Epoxy for Foundation & Concrete Crack Repair & Leak Prevention DIY Complete Kit Repairs Average Concrete Foundation Crack of 8 feet

  • Use for leak repair in basement concrete foundation repair, industrial and residential concrete floors, patios, sidewalks, balconies, pools and parking decks, reservoirs, tanks and more..
  • This product restores the structural integrity of the cracked wall by filling the crack with a high-strength adhesive that essentially "welds" the cracked wall together. This is not an expansion foam product..
  • Excellent adhesion to concrete, wood, fiberglass, and metal surface.
  • Wait 24-hours after applying epoxy paste to the crack for proper cure. After injecting the epoxy from cartridges, wait another 24-hours for full cure..
  • Each kit contains enough material to repair an average 1/16 inch wide, 8-foot crack in a concrete wall.
Check Stock

RTG Wood Repair Epoxy Putty (2-Pint Kit)

  • ...fected the East Coast Resin epoxy formula for superior UV-resistance, scratch-resistance, and moisture-resistance when compared to other industry brands..
  • SAFE AND ODORLESS - Surfaces coated with our premium epoxy are 100% safe for food to touch, and durably maintain their structural integrity over time without breaking down or leaching chemicals. Our odorless formula requires no mask and makes it easy to breathe and work in comfort all day long..
  • EXTRA EASY TO APPLY - With East Coast Resin epoxy, you don't have to be a pro to achieve professional results the very first time! Our smooth-coating resin & hardener kit is straightforward and easy to apply - even as a first-time novice or beginner hobbyist. Detailed instructions are included with each kit..
Check Stock

West System 105A Epoxy Resin (32 fl oz) Bundle with 207SA Special Clear Epoxy Hardener (10.6 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)

  • ... a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
  • STRONG PHYSICAL PROPERTIES: The 105/207 Epoxy Mixture has strong physical properties, so it can be used as a structural adhesive for gluing and laminating. It has excellent compatibility with paints and varnishes. An ultraviolet inhibitor in 207 Special Clear Hardener helps provide a beautiful, long-lasting finish when used with quality UV filtering varnish. The 105/207 Epoxy Mixture cures clear and colorless.
  • APPLICATIONS: Three coats or more can be applied in one day without additional surface preparation. Fewer coats are required to fill fiberglass weave and in most cases, the final coating can be sanded the following day. Builders also appreciate the excellent fiberglass wet-out characteristics achieved with 105 Resin/207 Special Clear Hardener Mixture, yet it wont drain from vertical surfaces like the very slow curing, low-viscosity epoxies.
Check Stock

West System 105B Epoxy Resin (126.6 fl oz) Bundle with 207SB Special Clear Epoxy Hardener (42.2 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)

  • ... a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
  • STRONG PHYSICAL PROPERTIES: The 105/207 Epoxy Mixture has strong physical properties, so it can be used as a structural adhesive for gluing and laminating. It has excellent compatibility with paints and varnishes. An ultraviolet inhibitor in 207 Special Clear Hardener helps provide a beautiful, long-lasting finish when used with quality UV filtering varnish. The 105/207 Epoxy Mixture cures clear and colorless.
  • APPLICATIONS: Three coats or more can be applied in one day without additional surface preparation. Fewer coats are required to fill fiberglass weave and in most cases, the final coating can be sanded the following day. Builders also appreciate the excellent fiberglass wet-out characteristics achieved with 105 Resin/207 Special Clear Hardener Mixture, yet it wont drain from vertical surfaces like the very slow curing, low-viscosity epoxies.
Check Stock

West System 650-8 G/Flex Toughened, Versatile, Liquid Epoxy Resin and Epoxy Hardener, Permanent Waterproof Bonding Of Fiberglass, Ceramics, Metals, Plastics, Damp & Woods, 4.5 Ounce x 2 Bottles

  • EXCELLENT ADHESION adhesion to hard-to bond woods. This toughened, versatile, thickened epoxy is for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. A bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. Makes structural bonds that can absorb the stress of expansion, contraction, shock, and vibration..
  • IDEAL FOR BONDING dissimilar materials. Mixed at a 1:1 ratio, this 2-part epoxy gives you 46 minutes of pot life at 72°F and an open (working) time of 60-75 minutes. It reaches an initial cure in 3 to 4 hrs, workable cure in 7-10 hours, and full cure in 24 hours..
  • OFFERS GREATER FLEXIBILITY than traditional epoxies or polyester resins. Yet it is much stiffer than adhesive sealants. With a modulus of elasticity of 150,000 PSI, this epoxy bonds tenaciously to a metals, plastics, glass, masonry, and fiberglass..
  • BONDS MANY MATERIALS including dissimilar ones. G/flex has a superior grip so that it can be used to bond to metals, plastics, glass, masonry, and fiberglass. G/flex is ideal for repairs to aluminum boats and polyethylene and ABS canoes and kayaks. It can also be used to wet out and bond fiberglass tapes and fabrics..
Check Stock

West System 209-SB Extra Slow Hardener

  • ...Minimum recommended working temperature is 70°F (21°C)..
  • PAIR WITH WEST SYSTEM 105-B Epoxy Resin. Blend with with WEST SYSTEM 105 Epoxy Resin at a 3-parts resin to 1-part hardener ratio..
  • EASILY MODIFIED with WEST SYSTEM Fillers, Additives, and Pigments to suit the job at hand, whether coating, applying fiberglass, structural bonding, or fairing. Not intended for clear coating..
Check Stock

EPOXY RESIN 101: Beginners Guide To Epoxy Resin, How To Use It, Making Epoxy Table And More

  • ...rdener kit is straightforward and easy to apply - even as a first-time novice or beginner hobbyist. Detailed instructions are included with each kit..
  • SAFE AND MINIMAL ODOR - Surfaces coated with our premium epoxy are 100% safe for food to touch, and durably maintain their structural integrity over time without breaking down or leaching chemicals. Our minimal odor formula requires no mask and makes it easy to breathe and work in comfort all day long..
Check Stock

SOLAREZ UV Cure Epoxy Pro Travel Kit - Epoxy Surfboard Repair Kit ~ Cures 3 min in The Sun! Epoxy Surfboard Repair, SUP Repair, Epoxy Wakeboard Repair, Low Odor ~ Eco Friendly, Made in The USA!

  • SOLAREZ UV Cure Epoxy PRO Travel Kit is EPS & Styrofoam Safe,.
  • Includes Everything You Need for a Professional Repair!.
  • Zerovoc Styrofoam-safe UV cure resin - 2-part epoxy resin for internal structural repairs - Solarez Microlite-Epoxy for foam repairs - Fiberglass cloth - Rope - Stainless Steel Scissors - Sandpaper - Eco-Friendly Clean Up Solvent - Applicators - Travel Box.
Check Stock