Black Path - Fits Yamaha Parking Brake Cover Plate Kit Banshee + Blaster + Raptor 250 + 350 + 660 + Warrior 350 + YFZ450 ATV (Red) T6 Billet
- FITS: 1987 - 2006 Yamaha Banshee, 1988 - 2006 Yamaha Blaster, 2004 - 2008 Yamaha Raptor 50, 2009 - 2021 Yamaha Raptor 90, 2001 - 2013 Yamaha Raptor 250, 2005 - 2013 Yamaha Raptor 350, 2001 - 2005 Yamaha Raptor 660, 2006 - 2021 Yamaha Raptor 700, 2017 - 2021 Yamaha YFZ50, 2004 - 2021 Yamaha YFZ450 and 1987 - 2004 Yamaha Warrior 350.
- ITEM CONTENTS: (1x) 6061 T6 Billet Aluminum Parking Break Block Off Plate.
- SPECS / MATERIALS: CNC Machined 6061-T6 Billet Aluminum.
- INSTALLATION TIME: Approximately 1 Hour or Less.
- Black Path strives to develop products that outlast our competition. Tested through tough street, track and off-road conditions..
Check StockiJDMTOY 75-123-Smoked-Amber 3pc Dark Smoked Lens Amber Full Front Grille Driving Light Kit for 2010-14 & 2017-up Ford Raptor (Powered by 36 Pieces of SMD LED Diodes)
- Warning: this product only fits the 2010-2014 Ford Raptor and 2017-up Ford Raptor's OEM grille, DO NOT fit any aftermarket "Raptor" style grilles at all!.
- Fit both 1st gen 2010-2014 and 2nd gen 2017-up Ford Raptor (Only fit the Ford Raptor OEM grille, not any aftermarket "Raptor" style grill).
- Each kit comes with 3 pieces black dark smoke lens 12-SMD amber yellow LED marker lights.
- Directly replace the factory amber LED parking/clearance lamps (OEM# AL3Z15442C) with plug and play installation.
- Give your Ford Raptor more than a replacement grille light.
- achieve fuller amber yellow LED lighting with 3x the brightness of OEM.
Check StockUSC 2K Spray Max Epoxy Primer Paint Aerosol
- RAPTOR Anti-Corrosive Epoxy Primer is a 2K high performance primer specifically designed to be used under RAPTOR Protective Coating to further extend the protective and anti-corrosive properties of RAPTOR.
- The advanced resin technology in RAPTOR Anti-Corrosive Epoxy Primer improves adhesion to bare metal and most other prepared surfaces, and promotes intercoat performance to further extend the life of RAPTOR protective coating.
- It contains a blend of anti-corrosive additives to inhibit rust and corrosion and offers excellent salt spray resistance.
- Can be applied directly over surface rust.
Check Stock5 Bands Graphic Equalizer with SUB Volume Adjustable for Subwoofer Channel, Built in Bluetooth for Wireless Music Streaming, Stereo RCA Output, Aux RCA Input, Mounting Hardware Included
- 5 BANDS GRAPHIC EQUALIZER: The 5 Bands Graphic Equalizer comes with a Sub Volume Adjustable for Subwoofer Channel. The equalizer has low, mid, midd-bass, mid equalizer and high equalizer. Each is tone adjustable from -12dB to +12dB.
- WIRELESS MUSIC STREAMING ABILITY: Equipped with built-in bluetooth for music streaming ability, connecting/pairing with today’s latest devices are made simple and hassle free. The equalizer also has a blue LED indicator for bluetooth.
- LOW BASS FILTER: Equipped with low bass filter with selectable control, the 5 bands graphic equalizer has a fader function for front and rear channel, subwoofer volume control, RCA output and Auxiliary Input (Rear) inputs for MP3, DVD, or Phone.
- POWERFULLY IMMERSIVE AUDIO: Take music streaming to the next level with the powerful 5 bands graphic equalizer creating an audio experience with master system volume that lets you listen to your beats while filling the room/car with blue light.
- GRAPHIC EQUALIZER DIMENSIONS AND VOLTAGE: The 5 bands graphic equalizer has a dimension of 7” x 4.72”x 1.18” -inches with an approximate weight of 1.59 lbs. It has a voltage of 11V-14.5V and output voltage of 5V RMS @ 0.05% THD.
Check StockDancing Out My Baby Shoes
- Feed your Raptor to increase his Health and do not let him be hungry.
- Give your Raptor Water because he needs to drink.
- Play with your Baby Raptor throwing Food.
- Throw food in the air to let him jump and catch it.
- Stroke your Raptor by touching on him to let him feel good.
Check StockTRANSTAR 6131 Gray 2K Epoxy Primer/Sealer - 1 Gallon
- RAPTOR Anti-Corrosive Epoxy Primer is a 2K high performance primer specifically designed to be used under RAPTOR Protective Coating to further extend the protective and anti-corrosive properties of RAPTOR.
- The advanced resin technology in RAPTOR Anti-Corrosive Epoxy Primer improves adhesion to bare metal and most other prepared surfaces, and promotes intercoat performance to further extend the life of RAPTOR protective coating.
- It contains a blend of anti-corrosive additives to inhibit rust and corrosion and offers excellent salt spray resistance.
- Can be applied directly over surface rust.
- 1L covers approximately 60 sq feet at 3 MIL.
- Salt spray resistance test completed at 003e1000 hours according to ASTM B117 at an independent laboratory.
Check StockGravity 4 Band Parametric Equalizer with USB/MP3 Player GR-EQ10USB
Check StockVolumes, amplifiers, equalizers
- The EX 3000 is an equalizer with three bands: BASS, MID BASS, MID HIGH beyond traditional resources Level, High Pass and Low Pass..
- Frequency response of 10Hz to 10KHz and Cooler controlled intelligent system.
- The Digital Signal Processor DSP 2.8 X features crossover: Input Channels: 2 / Output Channels: 8.
- Graphic Equalizer: 15 Band / Graphic Equalizer Presets: 12.
- Parametric Equalizer Input:1 / Parametric Equalizer Output: 8 / 1 per Channel.
Check StockPyleUsa 7 Band Parametric Equalizer - 7 Volt RMS Pre-Amp Output with Subwoofer Gain Control and 3 Input Sources Selectable Blue Light Illumination
- RCA INPUT/OUTPUT: Our 7-band parametric equalizer has a turntable input, pre-amp line aux inputs via RCA jacks, and an RCA line output for powered speakers. You may use the RCA output to connect a power amplifier, then connect the passive speakers.
- EQUALIZER AND VOLTAGE: an output voltage of 7V RMS at 0.05% THD 11V-15V and an operating voltage of 11V-15V. It also has a bass equalizer, mid-bass equalizer, mid equalizer, high equalizer and each frequency adjustable has a -12dB to +12dB.
- PARAMETRIC EQUALIZER DIMENSIONS: our product has a dimension of 7'' x 4.1''x 1.10'' -inches with an approximate weight of 1.5 lbs. It was a 7 volt RMS pre-amp output with 3 input sources selectable and it is in the size of half din.
- POWERFULLY IMMERSIVE AUDIO: Take your audio to the next level with our 7 bands parametric equalizer creating an audio experience that lets you listen to your beats. Filling the room with blue light that burst through the speakers.
- WHAT YOU GET: You will receive 2 mounting brackets, 8 Phillips-head screws, and a power red wire with 1A fuse and pre-amp line aux inputs via RCA & phone jacks when you purchase our 7 band parametric equalizer.
Check StockOff-Grid Knives - Raptor EDC Folding Knife with Tumbled Gray D2 Steel, Coyote Tan G10, Bearings, Deep Carry Left & Right, Hawkbill Tip, Stout Everyday Carry
- NEW Off-Grid Raptor with Coyote Tan Scales and a Graywash D2 Blade.
- MODIFIED HAWKBILL BLADE w. D2 STEEL: The Raptor blade design was made to cut with precision and authority. Once you sink the curved tip into whatever you're cutting, as you pull or push through, the straight edge will take over and make short work of the job at hand. The Raptor will handle all your EDC tasks and look quite badass while doing them. The D2 blade steel has incredible edge retention, corrosion resistance and it comes razor sharp out of the box..
- ♨️THREE FINGER GRIP & ALL-DAY ERGOS: The Raptor is Off-Grid's version of a compact EDC, a three finger grip and under three inch cutting edge, we consider compact. The Raptor will lock into your hand and your thumb will land on the jimping on the spine every time for full grippy leverage. Once you flip the blade and take hold of the handle, you'll know this knife is ready for work..
- ⚔️SURFIRE ACTON: Off-Grid designed the Raptor and our partners at Bestech built it. Just like our popular Enforcer, Enforcer XL, Rhino V2, Baby Rhino, Caiman, Caiman XL AND Our Elite Series Black Mamba and Scorpion knives, these guys know how to create buttery smooth action. The Raptor has an ergonomic flipper tab that will deploy the blade into ....
Check Stock3M Door Edge Protection Film, 08582, 36 Inch
- Convenient, offers a fast, easy way to apply RAPTOR without compromising performance, no spray equipment necessary.
- This colored bed liner spray can is ideal for spot repairs and small jobs.
- Use RAPTOR on a variety of surfaces that need a protective barrier that withstands the toughest situations.
- Now you can spray RAPTOR 2K Bedliner Aerosol for a no mess, no clean-up application.
- The durability of RAPTOR with the convenience of an aerosol.
- Easy and convenient - activate using the valve on base.
- Ideal for both consumers and professionals.
Check StockAll Balls 25-1044 Wheel Bearing Kit
- Specs: Wheel Bearing Kit, All Balls High-Speed bearings are manufactured tABEC 3 precision levels.
- Triple lip rubber seals keep the grease in and the water and dirt out.
- Chevron SRI 2 grease contains rust and oxidation inhibitors (-29 Degrees Celsius - 177 Degrees Celsius).
- Compatible With/Replacement For: Yamaha YFB250 Timberwolf 1995-1998, YFM 250 Raptor 2008-2013, YFM125 Raptor 2011-2013, YFM250 Beartracker 2001-2004, YFM250 Big Bear 2007-2009, YFM250 Moto-4 1989-1991, YFM250B Bruin 2005-2006, YFM350 Raptor 2004-2013, YFM350 Warrior 1987-2004, YFM350ER Moto-4 1989-1995, YFM660R Raptor 2001-2005, YFM700R Raptor 2006-2018, YFP350U TERRA PRO 1988, YFS200 Blaster 2003-2006, YFZ350 Banshee 1987-09, YFZ450 2004-2013, YFZ450R 2009-2018, YFZ450X 2010-2011.
- 1-year warranty protects you after your purchase. We're confident that our products will work flawlessly once installed in your vehicle. In the rare case that it does not, we'll replace it anytime within one year of your order. If you have a problem, we will take every step to assist you. Contact us for a replacement..
- 100% New aftermarket Wheel Bearing Kit built to meet OEM specifications for Yamaha.
Check StockMOVOTOR Raptor Fog Lights with Sequential Amber Turn Signal DRL Bumper Fog Driving Lights Compatible with Ford F150 Raptor 2017 2018 2019 2020
- Fitment: Raptor fog lights fit for 2nd Gen Ford Raptor 2017 2018 2019 2020 OEM bumper only(does not fit standard Ford F150 nor aftermarket Raptor....
- Multifunctional & Ford's exclusive design: Raptor Fog Light with switchback LED DRL Amber Sequential Turn Signals/fog light, amber sequential turn....
- Easy Installation: Easily Mounted with No Modification Needed to your Raptor bumper, build in the control box which easier to wiring but ensure stable....
- High Brightness and Durable: Made By ABS plastic material, enhancing strength and durability, high lumen fog light, leds lower power consumption,....
- Package: 2 PCS ford fog lights (left & right) + 1set Wire Harness+Installation Instruction. 365 days 100% risk-free satisfaction guarantee. If there....
Check Stock