Categories

Best Error free Taps

6Pcs Combination Drill and Tap Set, Metric Thread M3-M10 Screw Tapping Tool 1/4\ Hex Shank Titanium Plated HSS

  • Applicability: This product includes 1/4 inch hexagon shank HSS drill bits and tap kits. Metric M3, M4, M5, M6, M8, M10 threaded countersunk screws can be tapped together with this drill tap..
  • Material: These drill taps are made of titanium-coated high-speed steel and have a longer service life..
  • Specifications: M3 x 0.5mm pitch, M4 x 0.7mm pitch, M5 x 0.8mm pitch, M6 x 1.0mm pitch, M8 x 1.25mm pitch, M10 x 1.5mm pitch..
  • Design: The drill tap adopts a spiral groove design, and the chip removal process will be better..
  • Accuracy: These drill taps are used for tapping on machines and are usually more precise because human error is eliminated..
Check Stock

6Pcs 1/4" Titanium Coated Drill Bits, HSS M3 M4 M5 M6 M8 M10 Metric Thread Tap Bits

  • TITANIUM COMBINATION DRILL TAPS: These HSS drill and tap bits are great tools used to create screw threads, to cut or form the female portion of the mating pair. Drill tap bits increase efficiency of operation by allowing for drilling and tapping to be accomplished in a single pass..
  • THREAD AND PITCH SIZE: M3, M4, M5, M6, M8, M10/0.7mm, 0.8mm, 1.0mm, 1.25mm, 1.5mm, with 1/4inch hex shank..
  • USER FRIENDLY: Each tap drill is engraved with its size convenient for you to choose the suitable size with a glance. A tapered end on hex shank can prevent excessive knocks..
  • APPLICATION: They are used on a machine to do the tapping, such as a lathe. Machine tapping with these taps is faster, and generally more accurate because human error is eliminated..
  • GUARANTEE: If there any issue about this product, please CONTACT us, we will give the best solution in the first time. we guarantee replacement or refund..
Check Stock

Lisle 70500 Tap Socket Set

  • For Use in Restricted Areas. Ideal for use in areas where a T handle won't fit. Set of 8 sockets fits all number and fractional M. C. T. I. standard taps thru 1/2". Also fits 1/8" NPT taps and metric taps thru 12mm manufactured to M. C. T. I. standards. Sockets contained on a vinyl holder..
  • Ideal for use in areas where a T handle won't fit..
  • Set of 8 sockets fits all number and fractional M. C. T. I. standard taps thru 1/2"..
  • Also fits 1/8" NPT taps and metric taps thru 12mm manufactured to M. C. T. I. standards..
Check Stock

Lisle 83100 External Torx Plus Socket Set, 9pc

  • For Use in Restricted Areas. Ideal for use in areas where a T handle won't fit. Set of 8 sockets fits all number and fractional M. C. T. I. standard taps thru 1/2". Also fits 1/8" NPT taps and metric taps thru 12mm manufactured to M. C. T. I. standards. Sockets contained on a vinyl holder..
  • Ideal for use in areas where a T handle won't fit..
  • Set of 8 sockets fits all number and fractional M. C. T. I. standard taps thru 1/2"..
  • Also fits 1/8" NPT taps and metric taps thru 12mm manufactured to M. C. T. I. standards..
  • Ideal for use in areas where a T handle won't fit.
  • Set of 8 sockets fits all number and fractional M.C.T.I. standard taps thru 1/2 inch.
Check Stock

Muzerdo 110PCS Standard Sae and Metric Bearing Steel Tap and Die Rethreading Kit

  • ... | Metric Tap and Dies Set 110-Piece Metal Threading Kit cuts and renews external and internal threads to exact standards.
  • Ideal for professional machinists and DIY weekend warriors alike to rethread existing auto and machinery fasteners, remove screws/bolts, cut raw material.
  • Tap wrench fits the different sizes of taps, thread taps are used to process internal thread, thread die set is for external thread, plug taps suitable for cleaning and rethreading.
  • FITS YOUR APPLICATION: Metric – Taper taps (2x0.4, 3x0.5, 4x0.7, 5x0.8, 6x7.5, 6x1, 7x0.75, 7x1, 8x0.75, 8x1, 8x1.25, 9x0.75, 9x1, 9x1.25, 10x0.75, 10x1, 10x1.25, 10x1.5, 11x0.75, 11x1, 11x1.25, 11x1.5, 12x0.75, 12x1, 12x1.25, 12x1.5, 12x1.75, 14x1, 14x1.25, 14x1.5, 14x2, 16x1, 16x1.5, 16x2, 18x1.5,).
  • Tap wrenches (M3-M12 x 1/16”-1/2”, M6-M20 x 1/4”-3/4”).
  • Die wrenches (25mm x 1”, 38mm x 1-1/2” OD).
  • BUILT TO LAST: Constructed from chromium-coated high carbon steel for maximum strength and corrosion resistance.
  • Metric tap set has 3-4 flute abrasive cutting edges each so you can easily clean/repair and cut materials such as aluminum, iron, cast iron, alloy steel, carbon steel, abrasive steel, ma....
Check Stock

Machine Tap 1/2\-13 UNC Thread Pitch 4 Flutes, High Speed Steel Thread Forming Tap, Uncoated (Bright) Finish, Round Shank with Square End, Plug Chamfer, HSS Machine Screw Plug Tap

  • ... | Metric Tap and Dies Set 110-Piece Metal Threading Kit cuts and renews external and internal threads to exact standards.
  • Ideal for professional machinists and DIY weekend warriors alike to rethread existing auto and machinery fasteners, remove screws/bolts, cut raw material.
  • Tap wrench fits the different sizes of taps, thread taps are used to process internal thread, thread die set is for external thread, plug taps suitable for cleaning and rethreading.
  • FITS YOUR APPLICATION: Metric – Taper taps (2x0.4, 3x0.5, 4x0.7, 5x0.8, 6x7.5, 6x1, 7x0.75, 7x1, 8x0.75, 8x1, 8x1.25, 9x0.75, 9x1, 9x1.25, 10x0.75, 10x1, 10x1.25, 10x1.5, 11x0.75, 11x1, 11x1.25, 11x1.5, 12x0.75, 12x1, 12x1.25, 12x1.5, 12x1.75, 14x1, 14x1.25, 14x1.5, 14x2, 16x1, 16x1.5, 16x2, 18x1.5,).
  • Tap wrenches (M3-M12 x 1/16”-1/2”, M6-M20 x 1/4”-3/4”).
  • Die wrenches (25mm x 1”, 38mm x 1-1/2” OD).
  • BUILT TO LAST: Constructed from chromium-coated high carbon steel for maximum strength and corrosion resistance.
  • Metric tap set has 3-4 flute abrasive cutting edges each so you can easily clean/repair and cut materials such as aluminum, iron, cast iron, alloy steel, carbon steel, abrasive steel, ma....
Check Stock

Rain Bird DRIPPAILQ Drip Irrigation Repair and Expansion Kit

  • ...a threaded tap connection used for 1 "And 3/4" Threaded taps, another is uesed for unthreaded faucets..
  • 【wide applications】 save water and save time. Automatic irrigation kit is great for roof cooling, irrigation, agriculture, vegetable, greenhouse, flower bed, misting etc. Manual packaging, there is very little error rate, if you have any problems, you can apply for free replacement, or contact us. Thanks!!!.
Check Stock

Maple Syrup Tree Tapping Kit – (10) Taps + (10) 3-Foot Drop Line Tubes + 1- Quart Maple Sap Filter – Dark Blue Premium Food Grade Tubing with 80 Page Book “Guide to Maple Tapping & Recipe Cards

  • MADE IN NORTH AMERICA. Kit includes (10) 3-foot premium dark blue drop lines.
  • DARK BLUE TAPPING TUBES blocks the sun’s rays and protects the sap from sunlight entering the drop lines. BPA FREE.
  • LIFETIME GUARANTEE ON TAPS AND TUBING. Heavy duty food grade maple sugaring tubes and taps. Reusable taps & tubes. Flexible tubes are highly visible in the woods and show the flow of maple sap.
  • FILTERS MADE ESPECIALLY FOR SAP SYRUP FILTERING and are reusable. 5/16" tree saver taps cause 30-35% less damage trees compared to traditional 7/16" spiles but with the same output.
  • INCLUDES OUR FULLY ILLUSTRATED 80 page, copyrighted “Guide to Maple Tapping” paperback book written by an experienced sugarmaker. Also INCLUDES 5 Recipe Cards & Instructions for beginners or experienced maple tappers.
Check Stock

Safego 2-Pieces 50W 3Ohm LED Load Resistors - LED Load Resistors for LED Turn Signal Lights or LED License Plate Lights or DRL, Fix Hyper Flash Error

  • Fix Light Errors - 2pcs 50w 3ohm Load Resistors can fix your LED lights problems such as blinker flash error, no flashing or burnt out bulb indications, hyper flashing of led turn signal or license plate light bulbs, OBC error messages of other LED bulbs..
  • High Quality- LED load resistors are constructed from premium quality materials to ensure maximum strength and durability，LED load resistors are more resistant to heat, more resistant to temperature, moisture, high vibration and explosion proof for long lasting usage..
  • Controls Current Flow- 3 Ohm 50W LED Load Resistors will control the current flow in electrical circuits. It will put a specific amount of resistance into your LED lights to make it function properly..
  • Easy Installation -LED load resistors installs easily. Simply connect one wire of the resistor to the ground and the other one to the positive wire.Please apply the provided quick wire clip so you don’t have to cut any existing wires. Attention - Load Resistor gets very HOT when working, please mount it on metal surface. Do not mount on plastic surface, hose or painted surface to avoid melting..
  • Package: 2Pcs (1 Pairs) 50W 3 ohm Load resistors with 4Pcs T-Taps.We offer "ONE YEAR" warranty, LED load resistors works on any vehicle and ca....
Check Stock

Drill America DWTPT1/4-1-1/4SET 6 Piece NPT Pipe Tap Set in Wooden Case (1/4\

  • Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads.
  • Also called 'pipe taps', National Pipe Taper (NPT) taps are appropriate for threading a wide variety of materials both ferrous and non-ferrous..
  • The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap..
  • The thread tapers 3/4 of an inch per foot. All Pipe Taps furnished with a 2-1/2 to 3-1/2 thread chamfer..
  • 6 Piece Set of Carbon Steel NPT Pipe Taps, Sizes /4.
Check Stock

5 Piece NPT Thread Forming Taps Pipe Taps Set High-speed Steel Drill Bits for Cleaning or Re-thread Damaged or Jam Pipe Threads Size 1/8 1/4 3/8 1/2 3/4 in Storage Box

  • Durable materials: Upgrade Your Pipe Threading game with Our Composite Steel Pipe Taps Set. Ditch your old, carbon steel pipe taps and upgrade to our composite steel (GCR15) pipe taps set. With a higher hardness level than traditional carbon steel, our pipe taps are more durable and long-lasting..
  • Tool Storage Box: The 5-piece set includes all the sizes you need for clean and re-threading damaged or jam pipe threads, and the Storage Box makes for easy organization and transport. Includes size of: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, 3/4" - 14 npt.
  • Versatile set suitable for both personal and professional use. Clean and Re-Thread Damaged or Jam Pipe Threads with Ease - Ideal for Pipe Fittings, DIYers, handymen, and professionals who need to repair damaged pipe threads. Revive Damaged Pipe Threads with Precision Using Our 5-Piece High-Speed Steel NPT Pipe Taps Set..
  • NPT and BSP Available - Perfect for Cuts Internal Threads in Pipes. Durable and Harder Than Carbon Steel - Our GCR15 Material Makes All the Difference. With a round shank and square end, our pipe taps are well-suited for most applications in shallow cuts. Upgrade your pipe threading game today with our composite steel pipe taps set..
  • Uncoated Tools for Versatile Use: Unco....
Check Stock

NPT Thread Forming Taps - 5 Pieces 1/8 1/4 3/8 1/2 3/4 Pipe Taps Set with Storage Box Drill Bits for Cleaning or Re-thread Damaged or Jam Pipe Threads High-speed Steel Material

  • High quality materials: If you need to clean or re-thread damaged or jammed pipe threads, look no further than our NPT Thread Forming Taps. This 5-piece set includes 1/8", 1/4", 3/8", 1/2", and 3/4" pipe taps, each made of high-speed steel material for durability and long-lasting use. Our taps are forged from composite steel (GCR15) material, hardened to a higher hardness (traditional 45# carbon steel hardness is 44.
  • 5 pcs NPT Pipe taps used for clean and or re-thread damaged or jam pipe threads, Cuts internal threads in pipes. It is used for the repair of rusted, broken and slippery threads of water pipe joints. They are available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP) and come in the following sizes: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, and 3/4" - 14 npt..
  • Nominal size of the tap is that of the pipe fitting being tapped. Our pipe taps feature a square universal chuck that can be used with either a manual wire twister or a tap machine, making them convenient and fast to use. The round shank with square end and straight flute tools allow chips to collect in the flutes as they cut, making them well-suited for most applications in shallow cuts..
Check Stock

110 Piece Combination Tap and Die Set Alloy Steel 55°- 60° Metric Tools with Carrying Case + Free Glove Amazing Tour

  • 110 Piece Combination Tap and Die Set Alloy Steel Metric Tools with Carrying Case + Free Glove Amazing Tour.
  • Size:18 x 13 x 2.5"inch / 45 x33.5 x 6.5cm. Weight:14.3lb / 6.5kg. Material upgrading:Alloy Steel 55°- 60°, Sizes Stamped Engraved-etched On the Metal.
  • 35 Taper Taps + 35 Plug Taps + 35 Dies + 2 Tap Wrench M3-M12,M6-M20 + Die Wrench 25mm,38mm O/D + 1 T-Type Tap Wrench M3-M6 + 2 Antiskid Gloves.
  • Known for their ability to start easily, these taps and dies are the most commonly used style and are perfect for most hand threading applications.
  • Ideal for rethreading fasteners and fastener holes for auto and machinery repair. Perfect set for the professional craftsman Tap and die set is designed to thread cutting: tap is used to process internal thread, while the die is for external thread.
Check Stock