Categories

Best Esr Meter 2

HONEYTEK A6243L Digital Inductance Meter Electronic Capacitance Tester Inductance/Capacitor Test Table

  • 【DESIGNED AND ENGINEERED IN THE USA】 GME Professional in Circuit ESR capacitor tester designed and supported in the USA.
  • compare to most other ESR meters on the market that are generic private label import with unknown manufacturer and no support or warranty.
  • 【ACCURATE MICROPROCESSOR CONTROLLED】 Microprocessor generated 100 kHz output test frequency and low 15 mVp-p output test voltage that will not turn on any solid state devices during testing, critical for accurate test result in circuitry with active components.
  • 【INTELLIGENT DESIGN】 ESR capacitor tester automatically discharges capacitor under test.
  • Audible buzzer announces ESR range during testing allows quick checking of entire PCB in seconds.
  • Intelligent automatic calibration on power up, no manual zero needed unlike many other ESR meters.
  • 【WIDE RANGE IN-CIRCUIT ESR & DCR TESTING】 Tester meter measures ESR (equivalent Series Resistance) on capacitors range from 0.47µF to 2200µF, in or out of circuit.
  • 【EASY TO USE, PORTABLE, AND RUGGED DESIGN】 Easy One-Handed Tweezers with gold plated tips and extra-long cable.
  • Non polarity dependent test probe, eliminates the need for polarity checking.
Check Stock

Signstek MESR-100 V2 Auto Ranging in Circuit ESR LCR Meter Capacitor / Low Ohm Meter Up to 0.01 to 100R, Support in Circuit Testing

  • Using true 100 KHz sine wave to measure the ESR value, which is equal to the testing method of capacitor manufacturer..
  • Dual terminal, for fast and easy inspect general capacitor or resistor, a printed ESR table for fast check..
  • Measuring range from 0.001 to 100.0R, support IN CIRCUIT Testing..
  • Auto-ranging capacitor ESR and Low Ohm Meter..
Check Stock

Blue ESR Tester Kit - Requires Assembly

  • Meter accuracy tests ESR of 003e1uF electrolytics in circuit, +/- 0.01 ohm..
  • Non polarized 2' test leads with resistance compensation, improves fine accuracy.
  • Automatic power off when reading is unchanged for 3 minutes, preserves battery life.
  • Easy-to-read, high brightness 0.5 inch (13mm) piercing blue LED display.
  • In kit form with 1yr warranty on parts from Anatek, made in USA.
Check Stock

Global Specialties LCR-600 High Precision LCR Meter, 100 kHz

  • Measures: Ls, Lp, Cs, Cp, Rs, Rp, D, Q, ESR, EPR, Z, Ø, DCR on 2 Displays.
  • Frequency range of 100 Hz to 100 kHz with a basic accuracy of 0.3%.
  • Auto range, auto detect, sort function, open/short circuit compensation, and data hold.
  • Includes: Meter, test leads, power cord, and user manual.
Check Stock

New! BULLZ AUDIO 4400W 12V BCAP 4.4 Digital Car Power Farad Capacitor | BCAP4.4

  • True Spec 1.0 Farad 20V Surge Volt. Digital volt meter (blue).
  • Improves sound quality - cleaner mids and highs.
  • Solid brass top helps to reduce stripping.
  • Platinum plated. (2) 1/0 AWG/4 AWG power inputs and (2) 1/0 AWG/4 AWG ground inputs.
Check Stock

DE-5000 Handheld LCR Meter

  • This LCR Meter is a 19999/ 9999 counts dual display, high accuracy LCR meter, which could measure Inductance/ Capacitance/ Resistance with secondary parameters including dissipation factor (D), quality factor (Q), phase angle , equivalent series/ parallel resistance (ESR or Rp)..
  • This LCR Meter is fully auto ranging operation for AC impedance & DC resistance measurement. The user could measure the L/C/R components directly in “AUTO-LCR “ smart mode without selecting the function key..
  • Components could be measured in serial or parallel mode according to the DUT (device under test) impedance automatically.User could select the desired test frequencies of 100Hz/120Hz/1kHz/10kHz /100kHz..
  • The "Sorting"mode could help the user to make a quick sort for a bunch of components..
  • Standard Accessories: English PDF manual, DC9V Battery, Alligator test lead case(TL-21), SMD Tweezers case(TL-22), Guard Line(TL-23),,,,, Option: IR to USB cace *It isn't included..
Check Stock

Recoil R2D 2.0 Farad Car Audio Energy Storage Reinforcement Capacitor with Red Digital Read-Out

  • 2.0 Farad 20V Surge Volt, Runs on 10-16 Volts DC.
  • Improves sound quality for cleaner mids and highs. It’s perfect for systems up to 1200W..
  • Accepts any gauge of wire with ring terminals. Equipped with automatic shutoff protection.
Check Stock

Smart Tweezers ST5-S Professional LCR Meter/ESR Meter with Spare Test Leads and Pocket Case

  • Precision LCR Meter, 0.1% Accuracy, ideal for SMD, calibrated, certificate included.
  • Automated component identification. Automatic and manual C, R, L, Z, ESR modes.
  • ClearValue OLED Display, Swiss 24K Gold-plated Test Leads, Built-in Li-Ion battery.
  • Amazon Special: Portable and clam shell cases, spare premium test leads included.
  • 2 Years Warranty and Lifetime support. Supplied directly from Advance Devices, Inc..
Check Stock

Capacitor Tester, Capacitance Meter, Portable Capacimeter, LCD Digital for Measuring for Test

  • It is a series resistor inside capacitor, using 100kHz to remove the impedance 1/(2*pi*F*C)..
  • The impedance become small, and we can then measure the true series resistor value..
  • Using this theory, we can measure the capacitor is bad/ damaged or good in condition..
  • Our ESR meter only applies less than 15mV DC or peak to peak on a good capacitor, as a result we can use it as in circuit test..
  • During repag TV, LCD, Audio board, etc. we can in circuit testing the capacitor is good or not..
Check Stock

Rockville RFC50F v2 50 Farad Car Audio Capacitor w/Blue Voltage Display

  • Rockville RFC50F 50 Farad Capacitor Blue Voltage Display. ESR (Equivalent Series Resistance): 0. 015 ohm @ 120Hz, 25°C. 50 Farad Digital Hybrid Capacitor with Blue Illumination.
  • Blue illuminated window with light that blinks to the beat of the music. Black wire mesh cover. Warning tones for reverse polarity connection.
  • 3-Digit, super bright LED voltage meter. Automatic sleep status when volume is low. Operating Voltage: 10 - 16V DC.
  • Surge Voltage: 20V DC. Voltage measure accurate to +/- 0. 1VDC. Capacitance tolerance: +/- 10%.
  • Over-voltage protection circuit automatically alarms when the voltage above 17. 5V or under 10V. Unit dimensions (Inches): 10. 91” L x 6. 38” W x 2. 56” H..
Check Stock

Goupchn Handheld LC Inductance Capacitance Measuring Instrument High Precision Inductor Capacitor Tester Meter Kit

  • Innovative All-In-One Design: This is a tweezer-style digital tester, saving you time by allowing you to quickly test components before installation..
  • Multi-Functional: Not only is it an LCR meter for SMD components, but it can also be used as an ESR meter..
  • Recessed Control Button: Designed for comfort in mind, simply tap the top of the controller and you can switch between features..
  • 360° Rotatable Separated OLED Controller: No matter how you use the left hand or right hand, it is effortless to operate it with the 360° controller. The OLED display will not let you misread the parameters..
  • 10 Hour Battery: Designed for the working professional, on a full charge the tweezers can be used 10 hours continuously..
Check Stock

KAKOOTI Multimeter Test Leads Kit，2PCS Test Probes 1000V 20A 4PCS Silicone Alligator Clips Test, Multimeter Alligator Clips Set for Fluke/AstroAI/INNOVA/KAIWEETS Digital multimeter Clamp Meter

  • ✅【 Excellent Quality 】 This probe test lead cable is universally suitable for most of digital multimeter voltmeter.Multimeter test leads with banana plug are all made of high quality pure copper material, strong conductivity, low resistance and no signal loss. Leads: CAT II 1000V 20A..
  • ✅【Universal And Compatible】Multimeter leads probe cable clips multi plug tool kit. Multimeter Test Leads Probes and aligator electric clip makes electrical work easier and more precise. The Perfect test tool for precision testing devices. Perfectly fits all kinds of multimeters like digital clamp meters, digital multimeters, volt meter，ohm meter, electrical meter，bench power supply，multi meter electric tester，megger test leads，amp meter，esr meter，multimeter tester.
  • ✅【Sturdy & Heavy Duty】This crocodile clip is rust-proof, corrosion-resistant, oxidation-resistant, compact and durable.Silicon rubber material, double insulation, Each crocodile clip overall jaw perfect solid bite, they are clamping tight, long-term use without deformation.
  • ✅【Conductivity] 】The test lead set has excellent tensile strength and bending strength, as well as low strength and excellent electrical conductivity. It is very useful for electricians and maintenance p....
Check Stock

MATRIX MCR-5030 Benchtop LCR Meter Precision Digital Lab Tester for apacitance Ground Insulation Resistance Inductance Accuracy 0.1% Test Measure Inspect Multimeter （100Hz-30kHz）

  • 【MATRIX LCR METER BENCHTOP】Precision digital lcr meter for labo voltage capacitor ground insulation resistance. It adopts 4.3-inch TFT LCD screen, 5-digit test resolution impedance meter instrument, multi-frequency points and 0.1% accuracy to meet the testing needs of various components and parameters..
  • 【TEST PARAMETER and TWO DIFFERENT SIGNAL SOURCES】L,C, R, lZl, D, Q , X , ESR,θ(Deg),θ(Rad).30Ω,100Ω two different signal source output impedance..
  • 【PRODUCT FEATURE】 Built-in comparator, 5-level sorting flexible pass and bad alarm mode. Shutdown automatically saves test conditions, user-friendly operation. Instrument software version, which can be upgraded through U disk. U disk screen copy, test data saving, support format FAT16, FAT32 file system. There are more than 100 sets of setting files inside, and U disk expansion can save or call multiple sets of test files..
  • 【THREE-YEAR WARRANTY AND QUALITY CHECK】Buy Precision Digital LCR, you will get 1* Benchtop LCR Meter, 1* Power Cord, 1* Four-terminal Test Cord, 1* CD, 1* Test Report, 1* User Manual, 1 * Fuse table. We will inspect all power supplies and accessories before shipping to ensure that every customer receives a quality product with a three-year warranty policy..
Check Stock