Categories

Best Esun Pla Pros

IC3D Black 2.85mm PETG 3D Printer Filament - 1kg Spool - Dimensional Accuracy +/- 0.05mm - Professional Grade 3D Printing Filament - Made in USA

  • 1KG net (approximately 2.2 lbs) PLA Filament with Clear Spool or Black Spool.
  • eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA..
  • 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
  • Recommended Extrusion/Nozzle Temperature 205C - 225C.
  • Spool Diameter: 8" - Spool Width: 2.50" - Spool Hub Hole Diameter: 2.05" - Inner Circle Diameter: 3.5".
Check Stock

eSUN PLA PRO (PLA+) 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1kg Spool, 1.75mm, Gray

  • 1KG net (approximately 2.2 lbs) Filament with Clear or Black Spool.
  • eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA..
  • 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
  • Recommended Extrusion/Nozzle Temperature 205C - 225C.
  • Spool Diameter: 8" - Spool Width: 2.50" - Spool Hub Hole Diameter: 2.05" - Inner Circle Diameter: 3.5".
Check Stock

eSUN 3mm Black PLA PRO (PLA+) 3D Printer Filament 1KG Spool (2.2lbs), Actual Diameter 2.85mm +/- 0.05mm, Black

  • 1KG net (approximately 2.2 lbs) Filament with Black Spool.
  • eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA..
  • 3mm Filament. 2.85mm Actual Diameter (Dimensional Accuracy +/- 0.05mm). This is 3mm filament and actual diameter is 2.85mm +/- 0.05mm. This filament does not work with 1.75mm printers. Make sure your printer supports 2.85mm filament before purchasing to avoid unnecessary returns..
  • Recommended Extrusion/Nozzle Temperature 210C - 225C, about 20 Celsius higher than regular PLA..
  • Spool Diameter: 8" - Spool Width: 2.50" - Spool Hub Hole Diameter: 2.05" - Inner Circle Diameter: 3.5".
Check Stock

eSUN eSpool Detachable Refilament Reel, PC Hollow Recyclable Filament Holder, Easy Setup Environment-Friendly Replacement Storage Spool, 2 Pack, 200x65mm

  • 【Removable & Reusable eSpool】Specially Designed for eSUN Filament 3D Printer Refills. eSpool can be assembled and disassembled freely for repeat usage, recyclable and eco-friendly. Compared with non-detachable reel, it saves storage space and cost, reduce the waste of disposable reels.PLEASE CHECK THE SPOOL SIZE BEFORE PRCHASING.U.
  • 【Environmental Friendly】Made of PC material, light weight, high toughness and strength. Transparent appearance can monitor the usage of remaining filament in real-time. High Temperature Resistance and Large Hollow Structure makes 3D printer filament dried faster..
  • 【Easy to Use】Press cuboid column into the fixing hole of the disk until 3pcs columns are fixed, put 3D refill onto the installed disk, then align the fixing hole of another disk and press until the two disks are tightly fixed together. eSpool can be used repeatedly, durable and strong, not easy to break..
  • 【High Compatibility】Disk Diameter 200mm, Column Lengh 65mm, Column Width 34mm, Disk Thickness 4mm. Assembled structure, small space occupation, convenient to storage. Compatible with Most of 0.5KG, 0.75KG and 1KG PLA, PETG and other 3D printer spoolless filament..
  • 【Package Includes】2 Pack eSpool in total, each eSpool includes 2pcs round disk and ....
Check Stock

eSUN PLA PRO (PLA+) 3D Printer Filament, Dimensional Accuracy +/- 0.03mm, 1kg Spool, 1.75mm, Pine Green, Pantone 343C

  • 1KG net (approximately 2.2 lbs) Filament with Clear or Black Spool, Pine Green Color (Pantone 343C).
  • eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA..
  • 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
  • Recommended Extrusion/Nozzle Temperature 205C - 225C.
  • Spool Diameter: 8" - Spool Width: 2.50" - Spool Hub Hole Diameter: 2.05" - Inner Circle Diameter: 3.5".
Check Stock

eSUN 3mm Fire Engine Red PLA PRO (PLA+) 3D Printer Filament 1KG Spool (2.2lbs), Actual Diameter 2.85mm +/- 0.05mm, Fire Engine Red, (Pantone 199C)

  • 3mm Filament. 2.85mm Actual Diameter (Dimensional Accuracy +/- 0.05mm). This is 3mm filament and actual diameter is 2.85mm +/- 0.05mm. This filament does not work with 1.75mm printers. Make sure your printer supports 2.85mm filament before purchasing to avoid wasting of shipping...
  • eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA..
  • 1KG net (apximately 2.2 lbs) Filament with Clear Spool, Fire Engine Red, Pantone 199C.
  • Recommended Extrusion/Nozzle Temperature 210C - 225C, about 20 Celsius higher than regular PLA..
  • Spool Diameter: 8" - Spool Width: 2.50" - Spool Hub Hole Diameter: 2.05" - Inner Circle Diameter: 3.5".
Check Stock

eSUN PLA-LW PLA 3D Printer Filament 1.75mm 1KG Spool Lightweight Strong Paint Adhesion Foaming PLA Filament for 3D Printers 3D Printed Airplane Natural

  • 【Low density & High Foaming Volume Ratio】ePLA-LW has applied active foaming technology to achieve lightweight, low-density PLA parts. The highest....
  • 【Clog-free & No Warping & Less-tangle 】Full mechanical winding and strict manual examination ensure tangling free and avoid filament breaking and....
  • 【Easy to Paint & Wide Application】eSUN ePLA-LW lighweight PLA filament is very easy to paint and has a strong adhesion of surface paint. So it is....
  • 【Good Interlayer Adhesion & Matte Printing Effect】 Compared to wood PLA filament,ePLA-LW filament has more stable interlayer adhesion, and the....
  • 【Foaming When Printing】At around 210°C-270°C, this filament starts to foam during printing, increasing its volume by nearly 1.2 times, and the....
Check Stock

eSUN PLA Luminous Rainbow 3D Printer Filament, 1.75mm 1KG Spool Multicolor Change Glow in The Dark PLA for 3D Printers,Luminous Rainbow Color

  • ...Rainbow Multicolor】PLA Glow in the Dark Rainbow adds multicolored and gorgeous luminous rainbow effect based on ordinary PLA. Gradually multicolors make your prints more eye-catching and unique. Widely used in art decorations, toys, sculptures and clothing..
  • 【Vacuumed Sealed Packaging】Filament Net Weight: 1KG. eSUN filament comes in a sealed vacuum bag with a desiccant bag, easily keep your 3D printer filaments at an optimal storage condition and free from dust or dirt before opening the vacuumed sealed packaging..
Check Stock

Upgraded Dryer Box of 3D Printer Filament, SUNLU 3D Filament Dryer Box S1, Keeping Filaments Dry During 3D Printing, Filament Holder, Compatible with 1.75mm, 2.85mm, 3.00mm Filament, Storage Box

  • 1KG net (approximately 2.2 lbs) Filament with Clear or Black Spool.
  • eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA..
  • 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
  • Recommended Extrusion/Nozzle Temperature 205C - 225C.
  • Spool Diameter: 8" - Spool Width: 2.50" - Spool Hub Hole Diameter: 2.05" - Inner Circle Diameter: 3.5".
Check Stock

eSUN 1.75mm Clear PLA 3D Printer Filament 1KG Spool (2.2lbs), Glass PLA

  • 1KG net (apximately 2.2 lbs) Filament with Clear Spool, Dark Blue color.
  • eSUN PLA 3D Printer Filament Vacuumed Sealed With Desiccant. Clear Color.
  • 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
  • Recommended Extrusion/Nozzle Temperature 190C - 210C.
  • Spool Diameter: 8" - Spool Width: 2.50" - Spool Hub Hole Diameter: 2.05" - Inner Circle Diameter: 3.5".
Check Stock

eSUN 1.75mm Glass Purple PLA 3D Printer Filament 1kg Spool (2.2lbs), Glass Purple

  • 1KG net (apximately 2.2 lbs) Filament with Clear Spool.
  • eSUN PLA 3D Printer Filament Vacuumed Sealed With Desiccant.
  • 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm).
  • Recommended Extrusion/Nozzle Temperature 200C - 220C.
  • Spool Diameter: 8" - Spool Width: 2.50" - Spool Hub Hole Diameter: 2.05" - Inner Circle Diameter: 3.5".
Check Stock

eSUN 1.75mm Glass Lemon Yellow PLA 3D Printer Filament 1kg Spool (2.2lbs), Glass Yellow

  • 1KG net (apximately 2.2 lbs) Filament with Clear Spool.
  • eSUN PLA 3D Printer Filament Vacuumed Sealed With Desiccant.
  • 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm).
  • Recommended Extrusion/Nozzle Temperature 200C - 220C.
  • Spool Diameter: 8" - Spool Width: 2.50" - Spool Hub Hole Diameter: 2.05" - Inner Circle Diameter: 3.5".
Check Stock

eSUN 1.75mm Glass Light Blue PLA 3D Printer Filament 1kg Spool (2.2lbs), Glass Blue

  • 1KG net (apximately 2.2 lbs) Filament with Clear Spool.
  • eSUN PLA 3D Printer Filament Vacuumed Sealed With Desiccant.
  • 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm).
  • Recommended Extrusion/Nozzle Temperature 200C - 220C.
  • Spool Diameter: 8" - Spool Width: 2.50" - Spool Hub Hole Diameter: 2.05" - Inner Circle Diameter: 3.5".
Check Stock