Categories

Best Ethernet Serial Device Module

Lantronix xDirect - Device server - 10Mb LAN, 100Mb LAN, RS-232, RS-422, RS-485 - AC 100/230 V - XDT4851002-01-S

  • Dual Serial Device Server: Cpu: Cortex-M4 120Mhz, Serial RS485 & RS232 to Ethernet Server, 2 Serial Ports: 1 Port is RS232, 1 Port is RS485, 1 RJ45 Ethernet Port. Support RS232 & RS485 Working at The Same Time..
  • Data Link Protocol: Ip£¬Tcp£¬Udp£¬Dhcp£¬Dns£¬Http£¬Arp£¬Icmp£¬Web Socket£¬Httpd Client..
  • Speed: 10 / 100 Mbps, Mdi / Mdix Cross Direct Automatic Switching, Baud Rate: Rs-232£º600Bps ~ 230. 4Kbps£¬Rs-485£º600Bps ~ 1Mbps.
  • 1.5Kv Electromagnetic Isolation, Shell Isolation Protection.
  • Configure Via Web Browser or Virtual Com Software Interface.
  • Working Temperature: -40 ~ 85¡ãC, Power Consumption: 003c 1W..
  • What's in The Box: 1 x Dual Serial Device Server, 1 x 5V 1A Power Supply, 1 x Female to Female Serial Cable..
Check Stock

MikroTik 9-Port Desktop Switch 1 Gigabit Ethernet Port 8 SFP+ 10Gbps Ports CRS309-1G-8S+IN

  • The CRS309-1G-8S+ is a very compact, yet powerful networking switch.
  • It has eight SFP+ slots, supporting up to 10 Gbit module in each, which results in a total switching capacity of 162 Gbps and total non-blocking throughput of 81 Gbps.
  • The device also has dual-core 800 MHz CPU, 512 MB RAM, a management Ethernet port with PoE power input, RS232 serial port, a grounding terminal and is capable of dual boot (choose which operating system you prefer, RouterOS, or SwOS).
  • The compact and sleek metallic enclosure also acts as a heatsink, making this device passively cooled - no fan noise and no dust accumulation inside.
  • Special rackmount ears for installing unit into the standard rack are provided.
Check Stock

Chase Research IOLAN DS1 1-Port Device Server (04030124)

  • Nonstandard baudrates supported with high precision.
  • Port buffers for storing serial data when the Ethernet is offline.
  • Supports IPv6 / Ethernet redundancy (STP/RSTP/Turbo Ring) with network module.
  • Modular design for scalability / DES/3DES/AES for highly secure data transmissions.
Check Stock

JacobsParts WT32-ETH01 ESP32 Module Ethernet WiFi Bluetooth Development Board 100Mbps RJ45

  • The issue with the top soldered pins has been resolved, they are now shipping with separate unsoldered pins WT32-ETH01 is an embedded serial to Ethernet module based on the ESP32 series WT32-S1 MCU. The module integrates an optimized TCP/IP protocol stack, which is convenient for users to easily complete the networking functions of embedded devices while reducing development time cost. In addition, the module is compatible with half-pad and through-hole connectors..
  • The board width is a universal width and therefore, it can be directly soldered to boards, connectors, or even breadboards, which is convenient for users to use in different scenarios..
  • ESP32 series IC is an integrated 2.4GHz Wi-Fi and Bluetooth dual-mode SOC, with ultra-high RF performance, stability, versatility and reliability, as well as ultra-low power consumption..
  • ESP32 Module: WT32-S1 240MHz dual core microprocessor 4MB SPI flash memory Oboard 10/100Mbps RJ45 Ethernet (LAN8720A PHY) 802.11n WIFI Bluetooth 4.2.
Check Stock

Dorhea 3PCS BLE 4.0 Bluetooth Module AT-09 for Ardu-ino CC2540 CC2541 BLE Serial Wireless Module Compatible with HM-10

  • The master-slave module has three functions of transparent transmission, remote control and PIO acquisition. It can be switched and set through the AT command set. It is easy to use the same as the Bluetooth serial port module you have used before, without changing the PCB and the lower computer program..
  • Support AT command, users can change the serial port baud rate, device name, pairing password and other parameters as needed, use flexible..
  • Support UART/I2C interface, and support SPP Bluetooth serial port protocol, has the advantages of low cost, small size, low power consumption, high sensitivity of sending and receiving, etc., only need to be equipped with a few peripheral components to achieve its powerful functions..
  • This module is mainly used in the field of short-distance data wireless transmission. It can be easily connected to the Bluetooth device of the PC, or the data between the two modules can be intercommunicated..
  • When the Bluetooth connection is not established, the baud rate, name, and pairing password can be set by the AT command. After the setting, the parameter is saved after power-off, and the Bluetooth connection automatically switches to the transparent transmission mode..
Check Stock

MOXA NPort 6650-16 - 16 Ports Rackmount RS-232/422/485 Secure Device Server 100V~240VAC Input

  • Nonstandard baudrates supported with high precision.
  • Port buffers for storing serial data when the Ethernet is offline.
  • Supports IPv6 / Ethernet redundancy (STP/RSTP/Turbo Ring) with network module.
  • Modular design for scalability / DES/3DES/AES for highly secure data transmissions.
Check Stock

Lantronix PXN210002-01U PremierWave XN Device Server 4 Port 10Mb/100Mb LAN, RS-232, USB 2.0, 802.11 b/a/g/n

  • Industrial device server with installable industrial protocols allow virtually any serial device to connect to a new or existing Ethernet network. Dimensions: 3.54"H x 1.4"W x 2.4"D..
  • High-impact plastic for durability. Media type supported: Twisted pair..
  • Connectivity: 10/100Base-TX Fast Ethernet, Data rates: 300 - 115200 bps, Characters: 7 or 8 data bits. Interfaces/ports: Network (RJ-45), RS-232/422/485 serial..
  • Form factor: DIN rail-mountable. Connector type: Terminal block (screw)..
Check Stock

ACEIRMC 3pcs IIC I2C TWI Serial LCD 2004 20x4 Display Screen Blue + IIC I2C Module Interface Adapter for Raspberry Pi Arduino (Blue)

  • The LCD has always been a device that acts as a window in human-computer interaction. For example, the prompt window on some instrument devices, the temperature and humidity prompt box, the device running status monitor, and the prompt screen of the counting device all have LCD figures.
  • LCD2004+I2C 2004 20x4 2004A Blue/Green screen HD44780 Character LCD /w IIC/I2C Serial Interface Adapter Module for arduino.
  • It is a high-performance serial bus with bus rules and high-speed or low-speed device synchronization required for multi-master systems. The I2C bus has only two bidirectional signal lines, a serial data line (SDA) and a serial clock line (SCL)..
  • Compatible with all devices with I2C interfaces, such as for Arduino, raspberry pi, beagle bone black, tinker board, stm32, esp32 and more..
  • please check which chip you have on i2c interface. (Before you upload the code to the control board, please download the LiquidCrystal_I2C library).
Check Stock

5PCS HC-05 Wireless Bluetooth Receiver RF Serial Transceiver Module Master Slave Integrated Bluetooth Module 6 Pin Wireless Serial Port Communication BT Module

  • HC-05 Bluetooth Module is an easy to use Bluetooth SPP (Serial Port Protocol) module, designed for transparent wireless serial connection setup..
  • Default baud rate:9600, Button: Press the button.
  • the module enter the AT mode. AT commands are executed only in AT mode..
  • HC-05 is able to operate in both master and slave mode. Its communication is via serial communication which makes an easy way to interface with controller or PC. It's ideal replacement to your wired serial connection..
  • HC-05 Wireless BT Module: with this HC 05 Bluetooth module,You can quickly add the Bluetooth feature to your motherboard project, and then you can use your android phone to control some gadgets, such as: switch, LED..
  • Note: The module doesn’t suitable for IOS system..
Check Stock

MikroTik RB260GSP

  • MikroTik FiberBox Outdoor Switch with 5-Ports SFP - Includes 1 S-RJ01 Copper Module (CRS105-5S-FB).
  • The Fiberbox is ideal for locations where distance is restricting the use of regular ethernet cables..
  • The device is weatherproof and comes with a hose clamp and zip ties, ready to be installed on high masts and towers..
  • The package also includes the RJ45 SFP (S-RJ01) copper module already preinstalled in the first port, so you can use ethernet in one of the ports already out of the box..
  • If not needed, remove it to have access to all five SFP ports for using with 1.25 Gbit fiber modules..
Check Stock

SainSmart USB 4 Channel Relay Automation (5V)

  • NOYITO 2-Channel Micro USB Relay Module is equipped with a stable USB to serial port chip and a microcontroller. It can use the serial port debugging software to send serial commands on the computer to control the opening and closing of the 2-channel relay..
  • Onboard high performance microcontroller chip, CH340 USB control chip.With power LED indicator and relay status LED.On-board 2-channel 5V, 10A/250VAC, 10A/30VDC relay, long relay life, can work 100,000 times continuously..
  • Module with overcurrent protection and relay diode freewheel protection..
  • NOYITO 8-Channel Micro USB Relay Module ASIN：B09RGTSHHW.
  • NOYITO 4-Channel Micro USB Relay Module ASIN：B09RGVQXXT.
Check Stock

StarTech.com 1 Port RS-232 Serial to IP Ethernet Device Server - DIN Rail Mountable - Serial Device Server - Serial Over IP Device Server (NETRS232), Black

  • This product do not include user manual, if you need, we will send the pdf file to you.
  • HF2211 is a low-cost serial device server,which function is to realize bidirectional transparent transmission between RS232/RS485/RS422 and WiFi/Ethernet..
  • Support RS232/RS422/RS485 to Ethernet/Wi-Fi Conversion, Serial Speed Upto 460800 bps.
  • MIPS MCU with 4MB Flash and 8MB SRAM. Run on eCos.
Check Stock

ACEIRMC 4pcs AT-09 Bluetooth 4.0 Transceiver BLE Module Serial Port CC2541 HM-10 MLT-BT05

  • The AT-09 is a module that contains a BLE chip (CC2541)..
  • This small size Bluetooth 4.0 TTL transceiver module allows your target device communicate with for iPhone/iPAD, IOS 6 or Android 4.3 above devices..
  • This module allows to perform serial communication with the BLE chip thanks to an Rx and a Tx pin..
  • When the Bluetooth connection is not established, the baud rate, name, and pairing password can be set by the AT command. After the setting, the parameter is saved after power-off, and the Bluetooth connection automatically switches to the transparent transmission mode..
  • The module is also very similar to the HM-10 module and is also compatible with it so if you have some experience with the latter, you will get started quickly with the AT-09..
Check Stock