Categories

Best Ethernet Stepper Controller

BIQU LCD 12864 Version Graphic Smart Display Controller Module with Adapter and Cable for RAMPS 1.4 Reprap 3D Printer Kit

  • 2560 control board: The board is a microcontroller board based on the 16AU .It has 54 digital input/output pins (of which 14 can be used as PWM....
  • RAMPS 1.4: RAMPS interfaces an for Arduino with the powerful for Arduino platform and has plenty room for expansion. The modular design includes plug....
  • LCD 12864 with Controller: This full graphic Smart Controller contains a SD-Card reader, an rotary encoder and a 128 x 64 dot matrix LCD display. You....
  • A4988 driver module: A4988 Stepper Motor Driver Board is a breakout board for Allegro?ˉs A4988 DMOS Microstepping Driver with Translator and....
  • Warning: Connecting or disconnecting a stepper motor while the driver is powered can destroy the driver. (More generally, rewiring anything while it....
Check Stock

Intel Server System SR1530HCLSRNA

  • 1u Rm Sr1530hcls Dp 3x Hs Sas 45nm 400wType Server Form Factor Rack-mountable - 1U Approximate Dimensions (WxDxH) 16.9 in x 20 in x 1.7 in Localization North America.
  • Server Scalability 2-way Processor No CPU RAM 0 MB (installed) / 12 GB (max) - DDR II SDRAM - ECC Storage Controller Serial Attached SCSI ( Serial Attached SCSI ).
  • IDE Server Storage Bays Hot-swap 3.5" Hard Drive None..
  • Monitor None. Graphics Controller ATI ES1000 - 16 MB Networking Network adapter - Ethernet, Fast Ethernet, Gigabit Ethernet - Ethernet Ports : 2 x Gigabit Ethernet.
Check Stock

3D Printer Controller Kit RepRap RAMPS 1.4 + 2560 Board + 5pcs A4988 Stepper Motor Driver with Heatsink + LCD 12864 Graphic Smart Display 3D Printer Controller Kit

  • 2560 control board: The board is a microcontroller board based on the 16AU .It has 54 digital input/output pins (of which 14 can be used as PWM....
  • RAMPS 1.4: RAMPS interfaces an for Arduino with the powerful for Arduino platform and has plenty room for expansion. The modular design includes plug....
  • LCD 12864 with Controller: This full graphic Smart Controller contains a SD-Card reader, an rotary encoder and a 128 x 64 dot matrix LCD display. You....
  • A4988 driver module: A4988 Stepper Motor Driver Board is a breakout board for Allegro?ˉs A4988 DMOS Microstepping Driver with Translator and....
  • Warning: Connecting or disconnecting a stepper motor while the driver is powered can destroy the driver. (More generally, rewiring anything while it....
Check Stock

CNC Ethernet SmoothStepper for Mach3 / Mach4 CNC Smooth Stepper with Cable

  • CNC Ethernet SmoothStepper for Mach3 / Mach4 CNC Smooth Stepper with Cable.
Check Stock

3 Axis Stepper Motor CNC Router Kit Nema23 425oz-in 112mm Dual Shaft+CW5045 Driver 4.5A 256 microstep+400W 36V Power Supply CNC Controller Kit for Engraving Lathe Plasma Milling Drilling Machine

  • ♞【Product】3 Axis nema23 stepper motor driver controller kit.
  • ♞【Application】This cnc kit are widely used in engraving machine, printer,....
  • ♞【Stepper Motor】23HS2430B Nema23 57 stepper motor.
  • ♞【Driver】CW5045 driver Voltage: DC 24-50V.
  • Current: rated maximum output reaches: ±4.5A.
  • ♞【5 Axis Breakout Board】5 Axis breakout boad with cables,this breakout board needs to be connected to the parallel port and USB port of the....
  • ♞【Power supply】400W,36V/9.7A switching power supply.
Check Stock

CNCTOPBAOS 3 Axis GRBL Control Board USB Port CNC Router Controller Board grbl 1.1f with GRBL Offline Controller Remote Hand Control for CNC Engraving Milling Machine Mini DIY 1610 CNC 3018 PRO

  • ♞【Model】Upgraded 3 Axis GRBL 1.1F USB Port GRBL Control Board with Offline controller.
  • ♞【Applications】 The control board can be used with the 1310,1610-PRO, 3018,3018-PRO and 3018-PRO MAX etc engraving machines..
  • ♞【New functions】Add 2-pin emergency stop button port,probe port,XYZ limit port and add the power button switch..
  • ♞【Support software】GRBL Contol/Candle(3 axis)/Universal Gcode Sender.
  • ♞【Support Motor】Support XYZ three-axis control, spindle.Support stepper motor: 12V, maximum current of 2A or less is recommended within 1.5A and additional heat. (Any stepper motor Nema17,Nema23).
  • Support spindle: Support 24VDC Spindle PWM speed (0%-100%),also support 3-pin PWM/TTL signal control module.
  • ♞【Offline Controller】It supports SD card and TF card at the same time, standard capacity 1G, (notebooks generally have SD card interface, copy files are very convenient).
Check Stock

3-Axis 32-bit ARM Based CNC Controller,GRBL 1.1F USB Port CNC Engraving Machine Control Board with Fan Cooling,Support 500W Spindle/NEMA23 Stepper Motor/Laser (A4988+Fan)

  • Model:3 Axis GRBL 1.1F USB Port GRBL Control Board.
  • Input voltage: 12-24VDC .CNC Router Machine Controller board.
  • Compatibility: support 12V/24V laser, TTL/PWM modulation signal, 3P interface and 2P+2P interface.
  • support 775 motor, 200W/300W/500W spindle.
  • support dual Y-axis use, three-axis and two-axis switching use.
  • support X/Y/Z limit switch, Z-axis probe, emergency stop switch.
  • Support stepper motor: 12V, within 2A maximum current, within 1.5A recommended. (Stepper motor 42, 57).⚠️Please check the wire sequence when connecting the stepper motor, the wire sequence may be different for different motors, wrong connection may burn the motor and the motherboard..
  • Support software：LaserGRBL/Lightburn/Candle(3 axis)/Universal Gcode Sender.
  • Tip: Before you connect the motherboard, please carefully check the need to connect the device wire sequence (laser, motor) to prevent a mismatch of wire sequence, burn the device. Customer service 24H online, to provide you with help..
Check Stock

ANNOYTOOLS ARM 32-bit 3-Axis CNC Controller,GRBL 1.1F USB Port CNC Engraving Machine Control Board with Fan Cooling DRV8825 Standalone Driver,Support 500W Spindle/NEMA17/23 Stepper Motor/Laser Module

  • Model:3 Axis GRBL 1.1F USB Port GRBL Control Board.
  • Input voltage: 12-24VDC .CNC Router Machine Controller board.
  • Compatibility: support 12V/24V laser, TTL/PWM modulation signal, 3P interface and 2P+2P interface.
  • support 775 motor, 200W/300W/500W spindle.
  • support dual Y-axis use, three-axis and two-axis switching use.
  • support X/Y/Z limit switch, Z-axis probe, emergency stop switch.
  • Support stepper motor: 12V, within 2A maximum current, within 1.5A recommended. (Stepper motor 42, 57).⚠️Please check the wire sequence when connecting the stepper motor, the wire sequence may be different for different motors, wrong connection may burn the motor and the motherboard..
  • Support software：LaserGRBL/Lightburn/Candle(3 axis)/Universal Gcode Sender.
  • Tip: Before you connect the motherboard, please carefully check the need to connect the device wire sequence (laser, motor) to prevent a mismatch of wire sequence, burn the device. Customer service 24H online, to provide you with help..
Check Stock

3 Axis 1.1f USB GRBL Control Board with Offline Working Remote Hand GRBL Controller LCD Screen for CNC Laser Engraving Milling Machine Wood Router

  • Name: GRBL 1.1F 3 Axis Control Board V3.4+Offline Controller.
  • Input voltage: 12-24VDC (recommend 24VDC).
  • Support stepper motor: 12V, maximum current of 2A or less is recommended within 1.5A and additional heat. (Any stepper motor 42, 57).
  • Support spindle:24V 2A Support Spindle PWM speed (0%-100%).
  • Offline Control support SD card and tf card at the same time, standard capacity 1G, (notebooks generally have SD card interface, copy files are very convenient).
Check Stock

AOICRIE 5Pcs L298N Dual H Bridge Stepper Motor Driver Board For Arduino (5pcs)

  • 【Package Included】- 2pcs L298N Motor Driver Controller Board Modules..
  • 【Item Condition】- Drive voltage 5V-35V, high working power to 46V. Large current can reach 3A MAX and continue current is 2A. Power to 25w.(NOTE: To avoid damage, please use an external 5V logic supply when using more than 12V driving voltage.).
  • 【High Quality】- Use L298N as the main driving chip, so the module has such features as strong driving ability, strong anti-interference and low calorific value. And it also use large-capacity filter capacitor and diode with freewheeling protection function, thereby improve the reliability of module..
  • 【High Efficiency】- Dual-channel H-bridge design, can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors..
  • 【Easy of Use】- No assembly required. This L298N board comes ready to go. Just wire up motors and power, this thing will work wonders..
Check Stock

MACH3 Controller USB MACH3 100Khz Motion Controller Card Breakout Board Controller Card for CNC Engraving Servo Motor Stepper Motor Servo motor

  • 【Functions】The function of this motion control card includes that it supports automatic probe tool, emergency input, limit switch, and supports....
  • 【4-axis Linkage】Usb interface board supports for 4-axis linkage, you can connect four stepper motor drives or servo drives. 4 general-purpose....
  • 【Wide Use】The maximum step-pulse frequency of motion control card is100KHz, which is very suitable for CNC Engraving, Servo Motor, Stepper Motor....
  • 【Advantage】The motion controller needs using external 24V DC power to isolate USB and external port, and to make the system more stable. And it....
  • 【Drive Output Interface】The 4 general-purpose isolated relay drive output interface can drive four relays for controlling the spindle starts,....
Check Stock

Stepper Motor HAT for Raspberry Pi,Jetson Nano Onboard Dual DRV8825 Motor Controller Built-in Microstepping Indexer Drives Two Stepper Motors Up to 1/32 Microstepping 5V 2.5A

  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano.
  • Protection features: Overcurrent Protection (OCP), Thermal Shutdown (TSD), VM Undervoltage Lockout (UVLO).
  • Integrates 5V regulator, allows providing power to Raspberry Pi.
  • 6 available microstepping modes, configured with the DIP switches: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step.
  • Adjustable motor drive current via potentiometer, maximum 2.5A current output.
  • Onboard dual DRV8825 motor controller IC with built-in microstepping indexer, drives two stepper motors, easy to use.
  • Onboard multi connector options for stepper motors in different specifications.
Check Stock

RATTMMOTOR CNC 1610 PRO CNC Wood Router Machine Kit, 3 Axis GRBL Control DIY Mini CNC Milling Engraver Engraving Machine with CNC Offline Controller for Plastic/Wood/Acrylic/PVC/PCB/Wood

  • ...blcontrol/Candle software after connecting the control board to a coumpter via USB port. The control board is equipped with a fan to force heat dissipation, also has more fuctions such as support spindle PWM speed, limit switch, tool setting, steering gear..
  • 【CNC Offline Controller】This machine can be controlled simply by the offline controller without connecting it to a computer. Support SD card and TF card at the same time, standard capacity 1G. After inserting the file into the SD card,the engraving file can be directly identified..
Check Stock