Categories

Best Ethernet To Ttl Converter

StarTech.com Gigabit Ethernet Fiber Media Converter with Open SFP Slot - Fiber to Ethernet Converter - Gigabit Ethernet Media Converter (ET91000SFP2)

  • Supports standalone operation, or installation into the ETCHS2U Rackmount Chassis.
  • Open SFP slot supports MSA-Compliant Single / Multi-Mode Gigabit SFPs at varying distances.
  • Advanced features include Link-loss forwarding, remote monitor status, two frame lengths.
  • Convert and extend a Gigabit Ethernet connection over fiber using the Gigabit SFP of your choice.
  • Compatible with NETGEAR ProSAFE JGS524NA / Comparable to ET91000LC2.
  • Fiber to Ethernet Converter w/ Open SFP Slot / Multi / Single-Mode Fiber Converter.
  • 1000 Mbps Gigabit Ethernet Media Converter / Fiber Optic Converter / Ethernet Over Fiber-1000Base-SX.
  • Extend/Bridge networks over to fiber another building.
Check Stock

2Pack PL2303 PL2303HX USB to TTL Serial Adapter 3.3V Debug Cable USB to RS232 TTL Converter 4 Pin Female Socket Download Cable PL2303HX Cable

  • Specific Interface A: USB 2.0 type A Male Port.
  • Interface B: 4 pin Female Socket flying leads. Prolific chipset on the PCB board....
  • USB to TTL serial cable 3.3V (4 way output flying leads ) provides access to UART (transmit) Tx, (receive) Rx, VCC (5V) and GND(ground), RX and TX at....
  • TTL to USB Converter Support Windows XP/Vista/7/8.
  • Ideal USB 2.0 debug cord for Vendor ID re-write, router, GPS, set top box, transmitter, flash....
  • Application:PL2303 USB to TTL serial adapter is designed to be used for USB to TTL electronic projects, easy to connects devices with 3.3 V logic....
  • Note: 3.3V and 5.0V output is set (this is the power supply to the microcontroller, upgrade machines do not need the small plate) unplugged from the....
Check Stock

ACEIRMC 3pcs W5500 SPI to LAN Ethernet Network Module TCP IP STM32 Interface 3.3V 5V for Arduino WIZ820io RC5

  • Power supply mode:3.3V external power supply, current should be more than 200mA.
  • USR-ES1 is the Ethernet module of a SPI interface, interface is TTL level of 3.3V, power supply voltage of +3.3V, please ensure that the current is not less than 200mA, voltage is continuous and stable +3.3V..
  • W5500 SPI to LAN Ethernet Network Module TCP IP STM32 Interface 3.3V 5V for Arduino WIZ820io RC5.
  • Control interface:The TTL level, 3.3V SPI interface.
Check Stock

Geekstory BN-880 GPS Module U8 with Flash HMC5883L Compass + GPS Active Antenna Support GPS Glonass Beidou Car Navigation for Arduino Raspberry Pi Aircraft Pixhawk APM Flight Controller

  • BN-880 is suitable for Open source flight controller, not for flight control with SCM.
  • Bn 880 gps module is dual module compass, with and electronic compass IC HMC5883L.
  • Bn 880 gps module has flash to save configuration. So you do not need to reset next time when you use it.
  • DIts data Level is TTL or RS-232, Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable.
  • When you use it for Raspberry Pi, there is no driver needed but you need to install software.
Check Stock

EVISWIY PL2303TA USB to TTL Serial Cable Debug Console Cable for Raspberry Pi 3 Pack

  • 【Built-in PL2303TA Chipset】- this usb to ttl serial cable with built-in PL2303TA chip is easiest way ever to connect to your microcontroller/Raspberry Pi/WiFi router serial console port..
  • 【Wide OS Support】- this usb ttl serial cable is supported by most common OSes such as win XP/VISTA/7/8/8.1/10/ Mac OS X/Linux. (please refer to http://www.prolific.com.tw/US/ShowProduct.aspx?p_id=225&pcid=41, and then download the Prolific 2303 driver). If you are running Linux, drivers are already included in the kernel, no need to install anything..
  • 【Power Output】- this usb debug cable can be configured for either v5 or v3.3 power output. Built-in PL2303 chipset has an on-board DC-DC converter..
  • 【Wide Application】- this pl2303 usb ttl cable widely used for laboratories, product testing and low cost MCU communications etc..
Check Stock

DIYmalls BN-180 GPS Module TTL Dual Glonass GPS + GPS Passive Antenna for Arduino Raspberry Pi Pixhawk Aircraft CC3D Betaflight Flight Control

  • BN180 GPS Module can show your speed. When you use it for Raspberry Pi, there is no driver needed. Here is connection with RPi, red to 3.3v, black to....
  • When you power up bn 180 GPS module the first time in a new location, it always takes longer to find satillites. This is referred to as “cold....
  • Data Level : TTL or RS-232,Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable.
  • BN 180 gps doesn't have flash and compass. If you need it, please buy bn-880 gps module via "Visit the DIYmalls Store".
  • If you have any problem, please contact seller as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page,....
Check Stock

Cable Matters HDMI Extender Balun - Wall Mount HDMI Over Ethernet Extender with TCP/IP Support for 1-to-Many Setup 1080p 60Hz up to 328 Feet (100m) - Support Local Monitor Loop-Out

  • Extend any audio/video HDMI connection between a computer, Blu-ray player, media streamer, or gaming console to a HDTV, monitor or projector over a single Cat 6 UTP/STP cable with this HDMI to Ethernet adapter converter.
  • HDMI over Cat5e/Cat6 cabling operates up to 328 feet.
  • HDMI Balun Extender boxes are surface mountable with included brackets and screws.
  • The HDMI over Ethernet extender comes with bonus 2-Pack of High Speed HDMI cables.
  • Connect the HDMI Ethernet extender directly with a single cable or through a dedicated unmanaged network switch over Cat 6 cabling.
  • Do not connect through a LAN or router with other data traffic.
  • Connect up to 8 additional displays by adding Receiver Boxes (sold separately) through an unmanaged, dedicated Gigabit Ethernet network switch without QoS such as the TP-LINK TL-SG1005D Gigabit Desktop Switch.
  • Lab tested with the TRENDnet 8-Port Unmanaged Gigabit Switch, TEG-S81g.
  • Control a DVD player or other HDMI video source from a remote location with the included IR cables that forward commands over a dedicated DDC channel for convenience and security.
  • The Ethernet to HDMI adapter converter is compatible with HDCP compliant equipment for viewing copy protected content and integrating with HDMI switch, splitter, or matrix e....
Check Stock

Geekstory BN-220 Dual GPS Glonass Module Navigation TTL Level 9600bps + GPS Passive Antenna for Arduino Raspberry Pi Pixhawk F3 CC3D Betaflight F4 Flight Control

  • BN-220 gps module has flash to save configuration, so you do not need to reset data next time when you use it. But it has no compass. If you need gps with flash and compass, please buy bn-880 from Geekstory..
  • When you use it for Raspberry Pi, there is no driver needed but you need to install software.
  • The TX LED flash means gps module output normally.The PPS LED flash means gps module locate your place..
  • Data Level : TTL or RS-232,Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable.
  • BN 220 gps module documentation link cannot be displayed. If you need technical documentation, please click “Ask a question” to em-ail us.
Check Stock

DTECH FTDI USB to TTL Serial 5V Adapter Cable 6 Pin 0.1 inch Pitch Female Socket Header UART IC FT232RL Chip Windows 10 8 7 Linux MAC OS 6ft Black

  • 6 ft FT232 USB to TTL serial adapter (with 6 pin 0.1” pitch female socket header) connects devices with 5V logic level UART signals interface to a....
  • A genuine FT232RL chip module is housed in USB 2.0 type A male terminal for wider compatibility and supports reliable data transfer rates.
  • 6 feet FTDI USB to TTL serial cable (6 way outputs, Single-In-Line ) provides access to Tx, Rx, RTS#, CTS#, VCC (5v) and GND.
  • FTDI chipset on the PCB board has configurable internal EEPROM and UART signals can be individually inverted by configuring the EEPROM.
  • 6 pin header 5V TTL to USB converter cord is compatible with Windows 10, 8, 8.1, 7 (32, 64-bit), 2008/XP/Vista/CE, Mac OS, Linux 2.4 and greater.
Check Stock

USB to TTL Serial 3.3V UART Converter Cable with FTDI Chip Terminated by 6 Way Header Works with Galileo Gen2 Boards/BeagleBone Black/Minnowboard Max and More

  • Moyina USB TTL +3.3V levels (signals only, VCC= +5V) Serial cable is a range of USB to TTL serial UART converter cables featuring FTDI's FT232RL USB....
  • Provides a fast, simple way to connect devices with a TTL level serial interface to USB. Support EEPROM, Vendor ID re-write and Mprog3.5.
  • Provides access to UART Transmit (Tx), Receive (Rx), RTS#, CTS#, VCC (5V) and GND connections. RoHS compliant and CE approved.
  • Operating system Compatibility: Windows 10/8/7, Windows Vista, Windows XP, Windows 98, Windows ME, Linux and Mac OS. Please check for details in....
  • The USB side of the cable is USB powered and USB 2.0 full speed compatible, while the other end is a 6 way, 0.1”, Single-In-Line (SIL) pitch gold....
Check Stock

DTECH FTDI USB to TTL Serial 3.3V Adapter Cable 6 Pin 0.1 inch Pitch Female Socket Header UART IC FT232RL Chip Windows 11 10 8 7 Linux 6ft Black

  • 6 ft FT232 USB to TTL serial adapter 3.3V (with 6 pin 0.1” pitch female socket header) connects devices with 3.3 V logic level UART signals....
  • A genuine FT232RL chip module is housed in USB 2.0 type A male terminal for wider compatibility and supports reliable data transfer rates.
  • 6 feet FTDI USB to TTL serial cable 3V3 (6 way outputs) provides access to Tx, Rx, RTS#, CTS#, VCC (5v) and GND (power line provides 5V and data....
  • FTDI chipset on the PCB board has configurable internal EEPROM and UART signals can be individually inverted by configuring the EEPROM.
  • 6 pin header USB TTL UART converter cord is compatible with Windows 11, 10, 8, 8.1, 7 (32, 64-bit), 2008/XP/Vista/CE, MacOS, Linux 2.4 and greater.
Check Stock

DTECH FTDI USB to TTL Serial 3.3V Adapter Cable TX RX Signal 3 Pin 0.1 inch Pitch Female Socket FT232RL Chip Windows 11 10 8 7 Linux MAC OS 6ft Black

  • 6 ft USB to TTL serial adapter (with 3 pin 0.1” pitch female header socket) connects devices with 3.3 V logic level UART signals interface to a....
  • A genuine FT232RL chip module is housed in USB 2.0 type A male terminal for wider compatibility and supports reliable data transfer rates.
  • 6 feet FTDI USB to TTL serial cable (3 way output flying leads ) provides access to UART (transmit) Tx, (receive) Rx and GND.
  • FTDI chipset on the PCB board has configurable internal EEPROM and 3.3V UART signals can be individually inverted by configuring the EEPROM.
  • 3V3 TTL to USB converter cord is compatible with Windows 11, 10, 8, 8.1, 7 (32, 64-bit), 2008/XP/Vista/CE, Mac OS, Linux 2.4 and greater.
Check Stock

DTECH USB to TTL Serial 3.3V Adapter Cable TX RX Signal 4 Pin 0.1 inch Pitch Female Socket PL2303 Prolific Chip Windows 10 8 7 XP Vista (6ft, Black)

  • 6 ft USB to TTL serial adapter (with 4 pin 0.1” pitch female header socket) connects devices with 3.3 V logic level UART signals interface to a laptop via USB port.
  • A genuine PL2303TA chip module is housed in USB 2.0 type A male terminal for wider compatibility and supports reliable data transfer rates.
  • 6 feet USB to TTL serial cable 3V3 (4 way output flying leads ) provides access to UART (transmit) Tx, (receive) Rx, VCC (5V) and GND.
  • PL2303 Prolific chipset on the PCB board has configurable internal EEPROM and UART signals can be individually inverted by configuring the EEPROM.
  • 4 pin 3.3V USB to TTL converter cord Compatible with Windows 10, 8, 8.1, 7 (32, 64-bit), 2008/XP/Vista/CE.
  • ideal USB 2.0 debug cord for Vendor ID re-write, router, GPS, set top box, transmitter, flash firmware on hard drive, etc..
Check Stock