Categories

Best Ethernet Toggle Switch

DaierTek Lighted Toggle Switch 12V Waterproof Toggle Switch IP67 12 Volt LED Toggle Switch RGB RED Green Blue 16mm Pre-Wired for Car Boat Marine -3Pack

  • 1.Type: 12v On/off Illuminated toggle switch. The required mounting hole diameter of this lighted toggle switch is 16mm..
  • 2.Performance: This lighted toggle switch contains a 12-24V RGB (Red, Green, Blue) triple LED. Comparing with the previous LED toggle switch, this upgraded version enables a higher level of customized light styles. For example, you can choose one of colors such as red to light up when switches off.
  • and when switch on, the red color can switch to another color such as blue..
  • 3.Switch Rating: 20A 12VDC. Packed with 3 sets of Wires and Cable Ties. The length of the wires(including cable ties) with the illuminated toggle switch is about 15.8cm(6.22 inches)..
  • 4.Waterproof: Due to refer to the design of push button light switch, this LED waterproof toggle switch is IP67 waterproof without rubber boots. Please note: the switch housing and terminals behind of the panel are not waterproof..
  • 5.Application: This 12 volt toggle switch can be used both indoors and outdoors, such as marine boat, car, truck, other automotives, etc..
Check Stock

Aruastudio Retro Interior Light Switch ON-Off Set Switch Plate Toggle Switch 15A 250V AC 2Pin Black 002

  • ◆ Easy to install: Step-by-step instructions to guide you through the wiring process. (Package includes: toggle switch, plate cover, wire, heat shrink tubing, screw, connector ).
  • ◆ Toggle switch single pole (1-Way) electrical light switch, rating 15A 250V AC/ Perfect for unique interior!.
  • ◆ Toggle switch set is made of high-quality materials, including a well-made metal plate. Antique gold-colored toggle switch fits a modern style..
  • ◆ Toggle On/Off switch makes an exciting clicking sound and provides a satisfying experience. The unique toggle switch's modern stylish appearance enhances your room while maintaining function..
  • ◆ Suitable for houses, condos, apartments and most commercial areas that require only 15A switches such as offices, schools, stores, shops, restaurants, public facilities, and hotels..
Check Stock

Legrand - Pass & Seymour T600LIV Lighted Toggle Dimmer Switch, 600-watt Single Pole Dimmer, Easy Install, Ivory

  • LIGHTED TOGGLE DIMMER SWITCH: Features a toggle switch to turn lights on/off or to preset level and a small slide control to brighten/dim lights to suit any activity.
  • EASY INSTALLATION: Exclusive, screw-pressure-plate back wire terminals eliminates wire nuts.
  • DURABLE LIGHT SWITCH: Tough, impact-resistant thermoplastic housing..
  • AVAILABLE COLOR: Legrand toggle dimmer switches are available in Ivory, Light Almond and White.
  • LIGHT DIMMER SWITCH: Power-failure memory dimmer and light switch.
  • SUPERIOR HEAT MANAGEMENT: No time wasting break off tabs.
  • DIMENSIONS: 1.8 x 3.8 x 5.9 inches and Type: Incandescent Toggle.
Check Stock

DaierTek Waterproof Reverse Polarity Toggle Switch 12V 30A DC Motor Control RV Power Jack Switch Momentary ON -Off- ON DPDT 3 Position 4PIN Wired

  • Function: Momentary ON - OFF - Momentary ON DPDT 3 Position 4PIN..
  • Reverse Polarity Toggle Switch is used to Control DC Motor direction. RV Power Jack Switch Replacement..
  • 15A 250VAC Rating, Both can be used under DC and AC Circuit..
  • Waterproof Toggle Switch with Black Rubber Covered and 14AWG wire leads..
  • Panel Mount Toggle Switch with 12mm Cut-out Size..
Check Stock

DaierTek SPST Waterproof Toggle Switch 12V DC 30A 125VAC 20A Marine Heavy Duty 2 Pin ON Off Spade Terminals for Automotive Car Boat -2 Pack

  • Feature: The SPST toggle switch waterproof is made of metal and bakelite Material. Delicate appearance with strong Construction. Look chic and high-end on your equipment..
  • Function: This toggle switch with 2 pin SPST design (single pole single throw), easy to turn ON OFF. The rating is 30A 12VDC.
  • Installation: Mounting hole size is 0.48 inches (12.2MM), with #250 Spade Terminals(6.35X0.8mm) for quick connection..
  • Waterproof Cap: Each automotive toggle switch will come with a waterproof boot cap, which makes it a waterproof toggle switch..
  • Application: This 2 pin ON OFF toggle switch is widely applied to various additional electric equipment inside and outside Auto Car Marine Boat, such as lights, chassis lamp, fog lamps, dome light, etc..
Check Stock

Morris Products 2 Pole Toggle Switch – Heavy Duty DPST On-Off 4 Screw Terminals – Solid Brass Nickel Plated Bushings - 100,000 Mechanical Life Cycles – 1/2 Mounting Hole 70100

  • HEAVY DUTY TOGGLE SWITCH: Know that you’re getting high quality with this Heavy Duty 2 Pole Toggle Switch featuring a dielectric strength of 1500V and 100,000 mechanical life cycles..
  • 4 SCREW TERMINALS: This DPST Toggle Switch offers on-off 4 screw terminals for ultimate performance..
  • VARIED AMPS: With a standard load rating of 20A 125VAC and 10A 277VAC, this 2 Pole Toggle Switch is the obvious choice for your electrical applications..
  • EXPANSIVE OPERATING TEMPERATURE: Each DPST toggle switch features a 1/2” mounting hole and operating temperatures from 32 to 185 degrees Fahrenheit..
  • COLLECTION OF COMPREHENSIVE ELECTRICAL TOOLS: Morris Products is proud to feature a variety of electrical tools and applications that range from wire connectors and non-insulated ferrule to nylon cable ties and cable splicers..
Check Stock

Pack of 4 Wall Plate Outlet Switch Covers by SleekLighting | Decorative Copper | Variety of Styles Decorator/Duplex/Toggle / & Combo | Size 1 Gang Toggle

  • HIGH-QUALITY – Our brand of single Toggle switch wall plate is made of a high-quality metal and sturdy enough to survive any hard impact, and last a lifetime.
  • EASY TO INSTALL – This wall plate flexible is easy to install in just a few minute by an expert or DIY/ novice. It comes in 4 packs, 8 screws, and features a oil rubbed bronze finish..
  • COPPER FINISH – The finish enhances it resistant to dust, easy to clean, warp resistant with a smooth flat installation.
  • SPECIFICATION – This universal 1-gang Toggle switch wall plate is perfectly sized (4.9” H x 3.1"W) for a standard Toggle switch.
  • APPLICATIONS – The wall plate for switches is perfectly applicable to homes, offices, commercial and other building with any Toggle styled switch. If you want to upgrade the look of your standard wall Toggle switch this is the best choice for you.
Check Stock

SleekLighting Pack of 4 Wall Plate Outlet Switch Covers | Decorative Satin Nickel | Variety of Styles Decorator/Duplex/Toggle & Combo| Size 1 Gang Toggle

  • HIGH-QUALITY – Our brand of single Toggle switch wall plate is made of a high-quality metal and sturdy enough to survive any hard impact, and last a lifetime.
  • EASY TO INSTALL – This wall plate flexible is easy to install in just a few minute by an expert or DIY/ novice. It comes in 4 packs, 8 screws, and features a oil rubbed bronze finish..
  • SATIN NICKEL FINISH – The finish enhances it resistant to dust, easy to clean, warp resistant with a smooth flat installation.
  • SPECIFICATION – This universal 1-gang Toggle switch wall plate is perfectly sized (4.9” H x 3.1"W) for a standard Toggle switch.
  • APPLICATIONS – The wall plate for switches is perfectly applicable to homes, offices, commercial and other building with any Toggle styled switch. If you want to upgrade the look of your standard wall Toggle switch this is the best choice for you.
Check Stock

SleekLighting Pack of 4 Wall Plate Outlet Switch Covers | Decorative oil rubbed bronze | Variety of Styles: Decorator/Duplex/Toggle / & Combo | Size: 1 Gang Toggle

  • HIGH-QUALITY – Our brand of single Toggle switch wall plate is made of a high-quality metal and sturdy enough to survive any hard impact, and last a lifetime..
  • EASY TO INSTALL – This wall plate flexible is easy to install in just a few minute by an expert or DIY/ novice. It comes in 4 packs, 8 screws, and features a oil rubbed bronze finish.
  • OIL RUBBED BRONZE FINISH – The finish enhances it resistant to dust, easy to clean, warp resistant with a smooth flat installation..
  • SPECIFICATION – This universal 1-gang Toggle switch wall plate is perfectly sized (4.9” H x 3.1"W) for a standard Toggle switch..
  • APPLICATIONS – The wall plate for switches is perfectly applicable to homes, offices, commercial and other building with any Toggle styled switch. If you want to upgrade the look of your standard wall Toggle switch this is the best choice for you..
Check Stock

Art Plates - Double Gang Toggle Switch/Wall Plate - Sea Shells and Star Fish in Ocean Beach Tide Pool

  • Made in the USA: Sea Shells and Star Fish in Ocean Beach Tide Pool Decorative Printed Two Gang Toggle Wall Plate. Image printed on a solid metal 2 Gang Double Toggle Switch Plate Cover..
  • Two Gang Toggle Switch Plate Cover - Size: 4.5 x 4.57 - (Standard Size).
  • Decorative design is directly printed on metal switch plate. Made in USA by American workers. Ships from the USA..
  • UV cured, high gloss finish, protects from abrasions and scratches.
  • Decorative painted 2 Gang Toggle Switch Plate Cover..
Check Stock

Morris Products Momentary Contact Toggle Switch – Heavy Duty DPDT On -Off- On 6 Quick Connect Spade Terminals – 100,000 Mechanical Life Cycles – CURus Listed – 1.30” x .76” x .86”

  • HEAVY DUTY TOGGLE SWITCH: Know that you’re getting high quality with this Heavy Duty Momentary Contact Toggle Switch featuring a dielectric strength of 1500V and 100,000 mechanical life cycles..
  • 6 QUICK CONNECT SPADE TERMINALS: This large DPDT Toggle Switch is ideal for motor control and tool applications with (On)-Off-(On) 6 screw terminals for ultimate performance..
  • VARIED AMPS: With a standard load rating of 20A 125VAC and 10A 277VAC, this Momentary Contact Toggle Switch is the obvious choice for your electrical applications..
  • EXPANSIVE OPERATING TEMPERATURE: Each large DPDT toggle switch features a 1/2” mounting hole and operating temperatures from 32 to 185 degrees Fahrenheit..
  • COLLECTION OF COMPREHENSIVE ELECTRICAL TOOLS: Morris Products is proud to feature a variety of electrical tools and applications that range from wire connectors and non-insulated ferrule to nylon cable ties and cable splicers..
Check Stock

DaierTek Gibon Les Paul Guitar Toggle Switch 3-way Pickup Selector for Electric Guitar Silver Tip

  • Feature: The 3 way guitar toggle switch is made of metal. The Silver switch tip is Aluminum Chrome plated..
  • Function: The treble toggle switch is 3 position design. Lugs are tinned so that easy soldering. Including knurled mounting nut and flat washer..
  • The pickup selector switch with 12mm panel mounting size..
  • Packing included 1pcs guitar switch with chrome Tip and 1pcs white RHYTHM TREBLE plate..
  • Application: The metric toggle switch is widely applied to gibson epiphone les paul electric guitar..
Check Stock

Taiss 2pcs Momentary Toggle Switch DPDT ON -Off- ON 6 Terminal 3 Position Toggle Switches 12V Heavy Duty Rocker Toggle Switch with Waterproof Cap KL-C223

  • This Toggle switch Exquisite workmanship ,Quality assurance for 2 years. If there are quality problems within 2 years, you can send us email. We will send you new ones.
  • Special note: this switch is Momentary Toggle Switch Product name:Toggle Switch；Connector type: DPDT (ON)-OFF-(ON) ；Action type:Momentary..
  • Product parameters:Mounting hole diameter: 12mm.
  • Overall dimensions:60mmx32mmx20mm(2.3inx1.25inx0.78in)..
  • Rated Voltage & Current : 16(10)A 250V AC,20A 125VAC.
  • 12VDC.Mechanical life: more than 80.000 cycles. Electrical life: more than 10, 000 cycles..
  • Package content: 2 X toggle switch, 2 x Waterproof Cover.
Check Stock