Categories

Best Exhaust Clamps Inch

Exhaust Clamp Stainless Butt Joint 2.5' Band Clamp 2Pcs Exhaust Sleeve 2.5Inch 304 Stainless Steel Pipe Clamp Butt Joint Exhaust Muffler Clamp Band(2Pack)

  • HIGH QUALITY ---- Our 2.5inch exhaust clamp are made from high quality 304 Stainless Steel and plating zinc, Can resist the corrosion and rust from water..
  • Universal fitment.Joins 2.5" OD pipe to 2.5" OD pipe, you would better measure before pruchase..
  • These exhaust clamps feature unitized construction which minimized part number complexity and maximizes material efficiency for reduced weight..
  • Easy to install:Butt joint band clamps is a simple, effective way to connect exhaust system components such as pipes, mufflers and catalytic converters. Unique seal and high clamp loads are provided without distorting your exhaust components, allowing the flexibility to disassemble for service..
  • NOTE: Please check the size of the prouducts pictures,type and shape to make sure the item is the one that you need.If You Have Any Problems ,Take Time To Contact With Us,We Are In 24 Hours Service !.
Check Stock

Vent Systems 5\ inch to 4\ inch Duct Reducer Adapter Connector Fitting Pipe Increaser Reducer Cone for HVAC Ventilation Systems, ABS Plastic PVC pipe 125 to 100 mm

  • 6" by 8' DUCTING WITH FLEXIBLE SHAPE: This flexible duct is 6 Inches in Diameter and 8 Feet Long. It comes with 2 Duct Clamps Incuded in The Box.
  • 3-LAYER TOUGH: Keep your ventilation system free of rips and pin holes. This ducting is built with a layer of Heat Reflective Fire-Retardant Aluminum, Covered with PET for additional endurance and Steel Wire Helix to preserve the Ducts shape.
  • FLEXIBLE AND EASY TO USE: Our 6 Inch Duct is super flexible and easy to install, it will slide right on your Duct Fan, Vent Exhaust, Carbon Filter or Light Reflector. We include a pair of 6 Inch Clamps to make the installation a breeze.
  • 6" DIAMETER WITH ADJUSTABLE LENGTH: This Ventilation Duct is 6 Inches in diameter and comes in one 8 Feet Long Piece, which can be cut into as many pieces as you need using a wire cutter and a paper knife.
  • VARIETY OF APPLICATIONS: Our Ducting Is suitable for any Heating Ventilation & Air Conditioning (HVAC) Purposes. It will move and deliver air in Kitchens (cooking exhaust), Green Houses and Grow Rooms (Air Circulation, Intake, Exhaust and Light Fixture Cooling), Bathrooms (Smell and Moisture Exhaust), Dryer Rooms, Grow Tents and other applications you have in mind.
Check Stock

Besiter Dryer Vent Hose, Dryer Hose 4 inch, Flexible Dryer Duct Hose, Dryer Exhaust Hose with Aluminum Foil 5 Feet, Portable Dryer Vent Pipe with 2 Clamps and 1 Tape

  • High Quality with Great Aluminum Foil: Besiter dryer duct is made of high quality aluminum foil to keep your ventilation system free of rips and pin holes, the interface of dryer duct is reinforced with plastic, built-in steel wire,not easy to deform,better support and stability..
  • Perfect Attachments: Besiter dryer exhaust hose comes with 2 Stainless handle Steel Clamps and1 Roll of aluminum foil 120-ich length tape.No need for a screwdriver anymore, just use the handle to tighten the hose and clamps and use tape paste up ducting to fit vent pipe what you need, more convenient..
  • Widely Used: Besiter 4 inch dryer vent hose has two specifications: 5 feet and 8 feet ,these flexible ducting will be right on your Duct Fan, Vent Exhaust, Carbon Filter , duct work system, Kitchens(cooking exhaust), Bathrooms(Smell and Moisture Exhaust), Greenhouses（Air Circulation）, Grow rooms（Exhaust and Light Fixture Cooling）, Grow tents,Dryer Rooms, Laundry, etc, to provide a good environment for you..
  • Warranty Guarantee:You will receive excellent first-class service. If you have any issues when using the Besiter dryer tube ducting,please don't hesitate to contact us,we are online 24 hours and can provide you with technical guidance,. Besiter will provide you with ....
Check Stock

TerraBloom 6 Inch Aluminum Flex Duct - 8 FT Long, Flexible Ducting with 2 Clamps, 3 Layer HVAC Ventilation Air Hose - Great for Dryer, Grow Tent, Green Houses, Household HVAC Venting

  • 6" by 8' DUCTING WITH FLEXIBLE SHAPE: This flexible duct is 6 Inches in Diameter and 8 Feet Long. It comes with 2 Duct Clamps Incuded in The Box.
  • 3-LAYER TOUGH: Keep your ventilation system free of rips and pin holes. This ducting is built with a layer of Heat Reflective Fire-Retardant Aluminum, Covered with PET for additional endurance and Steel Wire Helix to preserve the Ducts shape.
  • FLEXIBLE AND EASY TO USE: Our 6 Inch Duct is super flexible and easy to install, it will slide right on your Duct Fan, Vent Exhaust, Carbon Filter or Light Reflector. We include a pair of 6 Inch Clamps to make the installation a breeze.
  • 6" DIAMETER WITH ADJUSTABLE LENGTH: This Ventilation Duct is 6 Inches in diameter and comes in one 8 Feet Long Piece, which can be cut into as many pieces as you need using a wire cutter and a paper knife.
  • VARIETY OF APPLICATIONS: Our Ducting Is suitable for any Heating Ventilation & Air Conditioning (HVAC) Purposes. It will move and deliver air in Kitchens (cooking exhaust), Green Houses and Grow Rooms (Air Circulation, Intake, Exhaust and Light Fixture Cooling), Bathrooms (Smell and Moisture Exhaust), Dryer Rooms, Grow Tents and other applications you have in mind.
Check Stock

4 Inch 16FT Air Duct, Non-Insulated Flexible Aluminum Dryer Vent Hose for HVAC Ventilation，Fan Filter and Grow Tent, 2 Clamps Include

  • [ 4 Inch 16FT Air Ducting ]--- 4 inches in Diameter x 16 FT Long, Include 2 Stainless Steel Clamps..
  • [ 4 Layers Material]--- 4 inch ducting is made of high quality 4 layers material (2 layers aluminum foil + black thick PVC film + steel wire), built in steel wire to compress and bend easily.The PVC film help to be light-proof and noise reduction..
  • [ Various Application]--- Dryer hose is applicable for more ventilation system, can use for clothes dryer, kitchen, bathroom, grow tent and green house and so on, make the room air circulation, provide a fresh environment for you..
  • [ Fire Resistant Air Duct]--- Dryer exhaust hose is fire resistant. And the temperature range is from -30 degree to 150 degree..
  • [ Easy to Install]--- Our 4inch aluminum ducting is easy to secure on your inline fan or Vent Exhaust, Carbon Filter or Light Reflector, use screwdriver to tighten the duct with the clamps..
Check Stock

SEUNMUK 4 Pack 2.5 Inches Exhaust Clamp Sleeve, Stainless Steel Butt Joint Band Clamp Exhaust Coupler Exhaust Band Clamp Sleeve for 2.5-Inch OD Exhaust Pipes, Mufflers

  • ROBUST CONSTRUCTION - The stainless steel exhaust clamp is high-quality 304 stainless steel material, well polished with smooth mirror finish and high strength, which is solid and durable to last and can be reused for a long time..
  • EASY TO JOINT - No welding design, the joint exhaust band clamp features a practical components including bolts, nuts and I-block, you can easily mount or disassemble them, and you can also wrap some exhaust heat tape to enhance complete sealing..
  • TIGHT SEALING - Uniform distribution of clamping force will not crush the pipeline, which can provide tight seal and keep off exhaust and noise leakage. The exhaust band clamp sleeve can close fit on the exhaust pipes or mufflers..
  • PRACTICAL AND MULTIPURPOSE - 4 packs of joint exhaust muffler clamps is designed with 2.5-inch diameter and 3 inches length, which fits for exhaust pipes or mufflers, manifolds, catalytic converters of that with an outer diameter of 2.5 inches..
  • SATISFACTORY SHOPPING EXPERIENCE - If you have any dissatisfaction with exhaust clamp 2.5 inch, you will get a full refund within 30 days. If you have any questions about the product, please feel free to contact us, we will provide you with a satisfactory solution..
Check Stock

Floshine 8PCS DIY Stainless Steel 3 Exhaust Pipe Kit,Including Mandrel Bend Pipe & U-Bend & Straight Pipe，Universal Fit 3.0 Inch Exhaust System…

  • DIY Exhaust System–Four types of pipes totaling 16 pipes to meet your exhaust system renovation plans.
  • High-quality–Rust-proof steel and computerized mandrel bends deliver high strength and greater durability, and factory custom manufacturing provides stability and longer service life..
  • Products in the kit– 2 pcs 90°Pipes, 2 pcs straight pipe exhaust kit, 2 pcs 135°Pipes， 2 pcs 180° U-Bends.
  • Easy to installation–Each pipe is extended in diameter at one end to facilitate sliding installation of different pipes.Installation can be done with clamps or by welding.
  • Fitment–Exhaust Pipe Bender Universal fit for modifying the exhaust pipe for the 3.0 inch exhaust system, 16 pipes can be interconnected and cut to create your own exhaust system.
Check Stock

BETTERCLOUD 16PCS 3 76mm 304 Stainless Steel DIY Custom Mandrel Exhaust Pipe Straight & Bend Kit

  • Made In the USA 3.00 inch X Pipe Universal These Are NOT Mandrel Bent.
  • Add an “X” pipe Kit to Create Dual Exhaust.
  • Kit includes Heavy 16 GAGE 3.00 DIA BY 11.00" inch About 55.00 Inches Long Assembled (4) 20.00" Long Pipes + 3.00 inch Header Collectors and Clamps.
  • Exhaust Cross Over X Pipe (Please measure to make sure this fits your Car or Truck) This is not a direct Replacement it is Aftermarket.
Check Stock

3 inch Exhaust Tip, MONOKING Black Exhaust Tip 3 inch Inlet Stainless Steel Clamp On Tailpipes for Truck Car 3″ Inlet 4″ Outlet 12″ Long

  • EXHAUST TIP 3 inch inlet -Universal fits 3” Outer diameter tailpipe. NOT fit 3” Inner diameter pipe. 3″ inlet diameter, 4″ outlet diameter, 12″ overall length. If your tailpipe has a 3” OUTER diameter it will fit perfectly.
  • POWERFUL SOUND – 3 inch Exhaust Tips improved powerful sound and distinctive style. 20 Degree of the angle end, slant cut design, Classic Black exterior improved appearance of your tailpipes. Made your car will seem skin to a sports car or at least a car with a modified engine.
  • DURABLE MATERIAL- 3in Exhaust Tip made from Sturdy 304 Stainless Steel not easy to fall off, also avoid rusting and deformation. A small hole on bottom of tip to drain water smoothly, avoid rusting.
  • CLAMP ON INSTALL – Holds up long time! Well thought out clamping mounting. It takes only 2 minutes easy to install. No welding or drilling is needed, just slide the tip into place on the tailpipe and clamps down tightly by tightening screws with a 6mm allen wrench.If you think it isn’t tight enough, additional welding will be a nice safeguard.
  • PACKAGE CONTENT – Package comes with 1x Exhaust Tip 3 inch inlet. MONOKING Universal black Exhaust Tips 3 inch inlet enjoy 1 YEAR warranty plus lifetime tech support and customer service. Ship from U.S. and....
Check Stock

Exhaust Clamps Band Clamp 5" Lap Joint - Stainless Steel Lap Joint Exhaust Band Clamp With 1 Block 2Pcs For 5" Od To 5" Id Exhaust Pipe, Muffler, Elbow And Exhaust Tubing Connection(2 Pack)

  • HIGH QUALITY ---- Our 5inch exhaust band clamp are made from high quality 304 Stainless Steel and plating zinc, Can resist the corrosion and rust from water..
  • Universal fitment.Joins Joins 5" OD Pipe to 5" ID Pipe, made of 304 stainless steel. Besides, we also provide 4 different sizes to fulfill your needs. You would better measure before pruchase..
  • These exhaust clamps feature unitized construction which minimized part number complexity and maximizes material efficiency for reduced weight..
  • Easy to install:Butt joint band clamps is a simple, effective way to connect exhaust system components such as pipes, mufflers and catalytic converters. Unique seal and high clamp loads are provided without distorting your exhaust components, allowing the flexibility to disassemble for service..
  • NOTE: Please check the size of the prouducts pictures,type and shape to make sure the item is the one that you need.If You Have Any Problems ,Take Time To Contact With Us,We Are In 24 Hours Service !.
Check Stock

iPower 4 inch 8 feet Non-Insulated Flex Air Aluminum Foil Ducting with Clamps for HVAC Ventilation/Grow Tents/Dryer Rooms/House Vent, Silver

  • 4 inch ducting feature: Flexible length for inline fan.
  • when not in use, it takes up little space. Built-in steel wire for reinforcement and long lasting performance.
  • Easy installation: Flexible length for exhaust fan blower/inline fan. 1 pair of 4 inch metal clamps made from stainless steel.
  • Fire proof coating ducting: Flexible ventilation ducting made from high-quality flame-retardant aluminum. Built-in corrosion-resistant wire helix for reinforcement and lasting performance.
  • Thermal endurance: Temperature endurance range from 0 ~ 185°F. (-18℃ ~ 85℃). Note: although the ducting is easy installation, violent installation is prohibited.
  • Applications: kitchens (cooking exhaust), green houses and grow rooms (air circulation, intake, exhaust and light fixture cooling), bathrooms (smell and moisture exhaust), grow tents, etc.
Check Stock

Exhaust Clamps Band Clamp 2.5 Lap Joint - Stainless Steel Lap Joint Exhaust Band Clamp with 1 Block 2Pcs for 2.5 Od to 2.5 Id Exhaust Pipe Muffler Elbow and Exhaust Tubing Connection 2 Pack

  • HIGH QUALITY ---- Our 2.5inch exhaust band clamp are made from high quality 304 Stainless Steel and plating zinc, Can resist the corrosion and rust....
  • Universal fitment.Joins Joins 2.5" OD Pipe to 2.5" ID Pipe, made of 304 stainless steel. Besides, we also provide 4 different sizes to fulfill your....
  • These exhaust clamps feature unitized construction which minimized part number complexity and maximizes material efficiency for reduced weight..
  • Easy to install:Butt joint band clamps is a simple, effective way to connect exhaust system components such as pipes, mufflers and catalytic....
  • NOTE: Please check the size of the prouducts pictures,type and shape to make sure the item is the one that you need.If You Have Any Problems ,Take....
Check Stock

Floshine 8PCS DIY Stainless Steel 2.25 Exhaust Pipe Kit,Including Mandrel Bend Pipe & U-Bend & Straight Pipe，Universal Fit 2.25 Inch Exhaust System

  • DIY Exhaust System--Four types of pipes totaling 16 pipes to meet your exhaust system renovation plans.
  • High-quality--Rust-proof steel and computerized mandrel bends deliver high strength and greater durability, and factory custom manufacturing provides stability and longer service life..
  • Products in the kit-- 2 pcs 90°Pipes, 2 pcs straight pipe exhaust kit, 2 pcs 135°Pipes， 2 pcs 180° U-Bends.
  • Easy to installation--Each pipe is extended in diameter at one end to facilitate sliding installation of different pipes.Installation can be done with clamps or by welding.
  • Fitment--Exhaust Pipe Bender Universal fit for modifying the exhaust pipe for the 2.5 inch exhaust system, 16 pipes can be interconnected and cut to create your own exhaust system.
Check Stock