Categories

Best Exhaust Collector

Remflex 8003 Universal Exhaust Gasket, (Set of 2)

  • Universal 3-1/2” Collector Flange, 3 Bolt Holes, 3-25/32" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Mophorn Exhaust Header Stainless Steel Long Tube Exhaust Header Polished Manifold Header For Chevy 283 302 305 307 327 350 400 Long Tube Exhaust Header

  • High-quality Stainless Steel: This exhaust manifold has premium quality, made of high-strength polished stainless steel, through an advanced welding....
  • Excellent Performance: Completely welded to against cracking and wearing under high pressure and temperature. Exhaust header collects exhaust gases....
  • Precise Dimension: Tube Diameter: 1 1/2", Collector Size: 3.00". It has a lightweight design. CNC machine flanges with TIG and MIG welded....
  • Easy to Install & Use: Gaskets and other mounting accessories are included in the package, and exhaust pipes can put more power through the wheels to....
  • Direct Fitment: These headers are compatible with 1966-1987 Chevy/GMC SBC 265-350Ci, Pickup Truck/Blazer/Jimmy 2/4WD, capable of adding instant....
Check Stock

Oneida Air Systems Super Dust Deputy 4 Deluxe

  • HIGH EFFICIENCY - Integrated air ramp and neutral-vane inlet provide ultra-high efficiency..
  • LONGER LIFERSPAN - Prevents fine dust and large debris from reaching your dust collector, prolonging the lifespan on your filter and reducing the need....
  • SIZED RIGHT – Retrofits on 1 HP – 3 HP single-stage dust collectors. Tapered intake and exhaust ports allow for easy, friction fit flex-hose....
  • EASY INSTALLATION - Compatible with almost any dust collector, the lightweight and compact design makes for fast and simple installations. Deluxe kit....
Check Stock

BLACKHORSE-RACING Performance Exhaust Header Manifold Stainless Steel Compatible with 1985-1993 Mazda B2200 Pickup Truck 2.0L/2.2L

  • ♐ Made of High Quality T-304 Stainless Steel Material.
  • ♐ Tube Diameter: 1-3/8"，Collector Diameter: 2.00".
  • ♐ TIG Weld & Mandrel-Bent For Maximum Performance.
  • ♐ Gasket & Exhaust Clamps Included, Reuse OEM Bolts.
  • ♐ Fitment: 1985-1993 Mazda B2200 Pickup Truck 2.0L/2.2L Driver Side Exhaust.
Check Stock

Mophorn Exhaust Header Set 1 5/8 Exhaust Turbo Headers Stainless Steel LS Swap Exhaust Headers Engine Conversion LS Swap Shorty Headers for Chevy LS1 LS2 LS3 LS6 LS7 SUV Camaro Firebird Truck

  • High-quality Stainless Steel: This exhaust header has premium quality, made of high-strength 304 stainless steel with reinforced interlocking braid....
  • Excellent Performance: Completely welded to against cracking and wearing under high pressure and temperature. With mandrel-bent to maintain....
  • Precise Dimension: With CNC Machined Flanges, 2 1/2" collector, 1 5/8" primaries. This exhaust header set is designed to combine, the exhaust gasses....
  • Easy to Install & Use: Integrated hardware, gaskets, bolts, and fittings pipes into a powerful turbo exhaust piping system, the pipe kit shows a....
  • Direct Fitment: It is compatible with for the Chevrolet Camaro Fits Chevy LS1 LS2 LS3 LS6 LS7, adding instant horsepower to the engine, improving....
Check Stock

Hedman 21115 Header Reducer - Set of 2

  • Measures 3" collector to 2.5" exhaust tube size.
  • Comes complete with all necessary hardware for installation.
  • Includes all necessary flanges and gaskets.
Check Stock

Flowtech 10010FLT Block Hugger Toob

  • Offers a universal installation solution for all small block Chevy V-8 applications.
  • Designed to connect Block Huggers to existing exhaust systems.
  • Built from thick, heavy-duty 16-gauge mandrel-bent tubing.
Check Stock

Jones Exhaust AHB2

  • 3.00 Inch Header Buddy Collector Kit 3.00 Inlet 2.25 Outlet 3 Bolt Flange Jones.
  • 2 Flanges 2 Collectors and 6 Nuts and Bolts Included.
  • HEADER BUDDY Is An Innovative, New Design For Header/Exhaust Assembly That Requires NO GASKET.
Check Stock

Heroines

  • ...nction: The 2.0 HP, 9.8 Amp low noise motor creates a powerful 1059 CFM airflow to exhaust dust and purify the air. Sound Rating: 73 dB. After using, a clean work environment will come back again..
  • Advanced Separation Technology: The cyclone system of this woodworking dust collector allows larger wood chips to fall and be caught in the collection drum, while finer wood particles are circulated into the filter. This achieves a better purification effect..
  • Large Capacity Bags: The 13.2 Gallon/50 L Collection Drum has quick-release levers and independent casters for easy emptying. The canister filter captures 99% of 3-micron particles, significantly increasing filtration effectiveness. The directly-mounted feature is time-saving and labor-saving..
  • Flexible and Portable: The dust collection system features a 6-inch inlet with a removable Y-fitting with two 4-inch openings, which can be used to branch lines to service more than one machine. A 78.7 inch/2 m flexible hose ensures your long-distance work. There are four wheels. Among them, two are lockable, ensuring flexible and easy movement..
Check Stock

Mr. Gasket 1203C High Performance Triangle Collector Gasket-Two Per Set

  • Designed to prevent exhaust leakage between the header and collector flanges.
  • Made from a compressed fiber laminate that is heat and tear-resistant.
Check Stock

Flowtech 31100FLT Long Tube Header - Ceramic Coated Finish -1-5/8 in x 3.0 in.

  • Tuned-length primary tubes for street performance.
  • Mandrel-bent tubing for smooth exhaust flow.
  • Mandrel-formed Power Plenum collector for low back pressure.
Check Stock

Delkevic Aftermarket Stainless Steel 4-1 Headers compatible with Honda CB750K 750 FOUR K(1979-1982)

  • Delkevic stainless steel headers are highly polished and designed to give a tight smooth line from the head with curved lines beneath the engine to give easy access to the oil drain plug and removal of the filter housing without removing the exhaust. The outer diameter (O.D.) of the outlet collector is 63mm which is a direct fit for the Delkevic Classic Drag silencer or suitable alternatives. Complete systems available..
  • This listing includes headers, gaskets and any additional hardware as necessary. We manufacture all our exhaust systems in our own purpose designed factory employing the most stringent quality control procedures ensuring constant customer satisfaction..
  • No rejetting or remapping is required after fitment however we always recommend a dyno test after fitting replacement parts to your motorcycle..
  • Certain areas in the US and abroad have laws altering or removing emissions systems. Delkevic makes no guarantee these pipes are street legal in any area. Please check your local area laws before purchase..
Check Stock

Delkevic Aftermarket Stainless Steel 4-1 Headers compatible with Suzuki GS1100E GS750 (1980-1983)

  • GS1100E (1980-1983) GS1100ES (1982-1983) GS1100S (1983) GS750E (1980-1982) GS750T (1982) GS750L (1980-1981).
  • Delkevic stainless steel headers are highly polished and designed to give a tight smooth line from the head with curved lines beneath the engine to give easy access to the oil drain plug and removal of the filter housing without removing the exhaust. The outer diameter (O.D.) of the outlet collector is 63mm which is a direct fit for the Delkevic Classic Drag silencer or suitable alternatives. Complete systems available..
  • This listing includes headers, gaskets and any additional hardware as necessary. We manufacture all our exhaust systems in our own purpose designed factory employing the most stringent quality control procedures ensuring constant customer satisfaction..
  • No rejetting or remapping is required after fitment however we always recommend a dyno test after fitting replacement parts to your motorcycle..
  • This pipe does not include a cataylitic converter. Certain areas in the US and abroad have laws altering or removing catalytic converters. Delkevic makes no guarantee these pipes are street legal in any area. Please check your local area laws before purchase..
Check Stock