Categories

Best Exhaust Flanges Gaskets

Dokili Exhaust Pipe Manifold Gasket Spring Rebuild Kit Fit for Polaris Ranger 700 800 Sportsman 600 700 2002-2007 Touring X2 2009 2010 2011 2012

  • Fits well, quality compares to OEM Harley flange..
  • Stainless Steel, Chrome Metallic Color exhaust flanges.
  • Specific dimension are all detailed, Includes 2 flanges, 2 exhaust gaskets, 2 retainer clips, and 4 acorn nuts.
  • Handmade Exhausts Flange Kit with Tapered Gaskets and Nuts , quality Harley exhaust flange gasket kit for almost Harley Davidson bikes except V-ROD.
Check Stock

BLACKHORSE-RACING 3 Inch 76mm Stainless Steel V Band Bolt Clamp with 2 Male Female Flanges for Turbo Pipes SS V-Band Flange Kit

  • ▲ 3 INCH STAINLESS STEEL EXHAUST CLAMP KIT – Complete V-band kit is ideal for performance exhaust systems, catback exhausts, turbo back exhausts and more..
  • ▲ COMPLETE 3 PIECE KIT – This complete 3inch Vband kit includes 1x 3″ V-Band clamp which is designed to accommodate the 2x stainless steel 3″ Vband flanges.
  • 1 male flange and 1 female flange. This allows for the flanges to properly align during installation to insure a leak free seal..
  • ▲ DESIGNED FOR 3″ EXHAUST PIPES – This kit is specifically designed for 3″ exhaust pipes. The flanges feature a recessed opening which allows for a 3″ exhaust to easily slip inside the flange, providing a perfect overlap seam for welding..
  • ▲ PERFECT FOR TURBO AND HIGH HORSEPOWER VEHICLES – If you’re making a catback exhaust, turbo back exhaust, mid pipe, or up pipe for your car, truck, or other vehicle this V-band kit is ideal for connecting different pipe sections. Conventional exhaust flanges multiple nuts, bolts, washers and a gasket. A V-band kit eliminates all of these and allows for a connection with a single nut..
  • ▲ EASY ON, EASY OFF – A V-band kit allows you to connect or disconnect sections of your exhaust by removing a single nut. Conventionally exhaust flanges involve multiple ....
Check Stock

Remflex 2008 Exhaust Gasket for Chevy V8 Engine, (Set of 2)

  • Chevy V8 - 4.8L, 5.3L, 6.0L LS2 ('99-'08), 5.7L, LS1 LS6 ('97-'08), includes Vortec, Manifold or Headers, 2/Set.
  • Port configuration comparable to Fel-Pro 1440.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Remflex 2004 Exhaust Gasket for Chevy V8 Engine, (Set of 2)

  • Chevy V8 - SB 262, 265, 267, 283, 302, 305, 307, 327, 350, 400, ('55 - '00), Round Port, Headers, 2/Set.
  • Port configuration comparable to Fel-Pro 1426.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
Check Stock

Remflex 2006 Exhaust Gasket for Chevy V8 Engine, (Set of 2)

  • 1-3/8 inch width x 1-1/2 inch width Square Port - Matches the Stock cast iron Head Port.
  • Chevy V8 - SB 262, 265, 267, 283, 302, 305, 307, 327, 350, 400, Stock Port, Manifold or Headers, 2/Set.
  • Port configuration comparable to Fel-Pro 1404.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
Check Stock

Pirate Mfg Chrome Header 6Pt Head 16Pc Bolt Kit Compatible with BB Chevy BBC V8 396-454

  • Dynatech header flanges are of the highest quality for a great start to your exhaust header.
  • 1/4 thick and CNC laser cut for a clean transition from the cylinder head port to the header tube.
  • This is made of mild steel for a strong long-lasting construction.
  • A great exhaust system starts at the beginning - the flange and gaskets.
  • A big Dynatech advantage is the wide selection of port matched flanges.
Check Stock

Remflex 2032 Exhaust Gasket for Chevy V8 Engine, (Set of 2)

  • 1-1/4 inch width x 1-5/8 inch height Oval Port.
  • Chevy V8 -Small Block 262 - 400, 1-1/4" x 1-5/8" Oval Port, For Raised Weld Bead Headers , 2/Set.
  • additional sealing material is provided around the weld bead to provide a better seal.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

EVIL ENERGY V Band Clamp with Flange Male Female Stainless Steel 3.0 Inch

  • [Size] Joins 3.0" OD pipe to 3.0" OD pipe. T-Bolt thread size: M8*1.25..
  • [Advantage] V-band clamp is easy to install and remove perfect for applications requiring frequent removals and provide a great seal with even....
  • [Feature] Male female flanges are sealed without gaskets to ensure proper alignment of the flanges inside the clamp for easy installation..
  • [Material] Stainless steel clamp and flanges.
  • [Application] Widely used in exhaust system, turbocharger, downpipe, muffler etc..
Check Stock

Flowtech 11572FLT Small Block Chevy Turbo Headers - Natural Finish

  • Available with 1-3/4” or 1-7/8” mandrel bent primary tubes and 2.50” collectors with merge spears for increased exhaust velocity.
  • 3/8” thick header flanges for a leak-free seal.
  • 2.50” V-band flanges and clamps for superior seal and even pressure at the flange.
  • Premium header gaskets and bolts included.
  • Designed for a variety of configurations (Up and Forward, Down and Forward, or Down and Back).
Check Stock

BBK 40140 1-5/8 Silver Ceramic Coated Shorty Tuned-Length Exhaust Header for Dodge Truck

  • BBK is your Number One Aftermarket Performance Exhaust Brand in the USA - American Designed and Built.
  • BBK Exhaust is Built with CNC Mandrel Bent Tubing for 35% Increased Flow Over Stock to Add 10-15 Horespower and Improve Torque and Performance.
  • Aircraft Quality Construction, Heavy Gauge 1-5/8" Tubing, 3/8" Laser Cut Flanges, Large Bore Patented Designed Collectors and Custom Precision Hand....
  • Direct "Perfect" Fit Replacement Exhaust includes All New Gaskets and Hardware and Offers Improved Performance and Sound Over Restrictive Stock....
  • Bolt on 14-18 HP with these BBK Shorty Tuned Length Exhaust Headers Fit all 2009-2011 Dodge Hemi Ram Truck 5.7L Applications - Polished Silver Ceramic....
Check Stock

Hedman 21115 Header Reducer - Set of 2

  • Measures 3" collector to 2.5" exhaust tube size.
  • Comes complete with all necessary hardware for installation.
  • Includes all necessary flanges and gaskets.
Check Stock

Mophorn Exhaust Header Stainless Steel Long Tube Exhaust Header Polished Manifold Header For Chevy 283 302 305 307 327 350 400 Long Tube Exhaust Header

  • High-quality Stainless Steel: This exhaust manifold has premium quality, made of high-strength polished stainless steel, through an advanced welding....
  • Excellent Performance: Completely welded to against cracking and wearing under high pressure and temperature. Exhaust header collects exhaust gases....
  • Precise Dimension: Tube Diameter: 1 1/2", Collector Size: 3.00". It has a lightweight design. CNC machine flanges with TIG and MIG welded....
  • Easy to Install & Use: Gaskets and other mounting accessories are included in the package, and exhaust pipes can put more power through the wheels to....
  • Direct Fitment: These headers are compatible with 1966-1987 Chevy/GMC SBC 265-350Ci, Pickup Truck/Blazer/Jimmy 2/4WD, capable of adding instant....
Check Stock

BBK 1516 1-5/8" Long Tube Full Length High Flow Performance Exhaust Headers for Ford Mustang 5.0L - Chrome Finish

  • BBK is your Number One Aftermarket Performance Exhaust Brand in the USA - American Designed and Built.
  • BBK Exhaust is Built with CNC Mandrel Bent 1-5/8" Tubing for 35% Increased Flow Over Stock to Increase Horsepower, Torque and Performance.
  • Aircraft Quality Construction, Heavy Gauge 1-5/8" Tubing, 3/8" Laser Cut Flanges, Large Bore Patented Designed Collectors and Custom Precision Hand and Robotic Welds for Long Lasting Quality.
  • Long Tube, Full Length Direct "Perfect" Fit Replacement Exhaust Includes All New Gaskets and Hardware (Where Applicable) and Offers Improved Performance and Sound Over Restrictive Stock Systems.
  • Chrome Finish - Designed to Fit All 1979-1993 Ford Mustang 5.0 Applications (5 Speed Only) Requires Matching Short Mid H or X Pipe to Complete InstAllation.
Check Stock