Categories

Best Exhaust Flared Outlet Tips

LucaSng Universal 4 Turbo Dual Smoker Diesel Exhaust Stack T Pipe System with 2Pcs 4 Inlet 7 Outlet Gloss Black Stainless Steel Miter Cut Diesel Smoker Stack Tips 5 ID Inlet 36 Long With Clamps

  • Universal 4" Turbo Dual Smoker Diesel Exhaust Stack T Pipe Kit + 4"Inlet 7"OutLet Cut Stack Tips Gross Black.
  • Smoke kits:T409 Stainless Steel & Coated Black.
  • Cut Exhaust Stack Tip：Inlet: 4" (101.6mm), Outlet: 7" (177.8mm), Total length: 36" (914.4mm) Gloss Black Finish.
  • Fitment: Universal,For Truck, Dodge, Chevy.
  • Installation should depend on the inside diameter and outside size.
  • Professional installation is highly recommended.
  • Package includes1 Set Smoke kit with 2 Cut Exhaust Stack Tips.
Check Stock

AUTOSAVER88 3 Inch Dual Exhaust Tip, 3' Inlet 3' Outlet 9.5' Overall Length Chrome Polished Stainless Steel Double Layer Staggered Diesel Exhaust Tail Tip for 3.0' Outside Diameter Tailpipe, Weld On

  • universal fits 3″ outside diameter of trucks car exhaust tailpipe (Note: please measure dimension to make sure it will fit before purchasing).
  • Anti-deformation & rustproof: built from high-strength stainless steel, our exhaust tips perfectly decorate your tailpipe system with polish stainless surface.
  • effectively anti-corrosive, avoid rust and deformation for enhanced durability.
  • Stylish & pleasant-sounding: the thicker inner wall design make your car sounds rumble and crackle for a more powerful and unique sound while giving your car a new & sporty appeal.
  • Easy installation: weld-on design, double layer wall, slant angle cut, rolled edge.
  • Maintenance tips: please routinely clean off the debris, cement, oil, dust and dirt on the surface or the interior of the exhaust tips since good maintenance ensures a longer service life of exhaust tips (NOTE: Professional installation would be highly recommended).
Check Stock

AUTOSAVER88 2.5 Inch Dual Exhaust Tip, 2.5' Inlet 3' Outlet 9.2' Length Chrome Polished Stainless Steel Double Layer Staggered Exhaust Tip for 2.5' OD Tailpipe, Slant Angle Cut, Weld On, Universal

  • universal fits 2.5″ outside diameter of trucks car exhaust tailpipe (Notice: please measure dimension to make sure it will fit before purchasing).
  • Anti-deformation & rustproof: Built from high-strength stainless steel, our chrome exhaust tips perfectly decorate your tailpipe system with polish stainless surface.
  • effectively anti-corrosive, avoid rust and deformation for enhanced durability.
  • Stylish & pleasant-sounding: The thicker inner wall design make your car sounds rumble and crackle for a more powerful and unique sound while giving your car a new & sporty appeal.
  • Easy installation: weld-on design, double layer wall, slant angle cut, rolled edge.
  • Maintenance tips: Please routinely clean off the debris, cement, oil, dust and dirt on the surface or the interior of the exhaust tips since good maintenance ensures a longer service life of exhaust tips (NOTE: Professional installation would be highly recommended).
Check Stock

AUTOSAVER88 Universal Dual Exhaust Tip 2.5 Inch Inlet, 2.5' Inlet 3.5' Outlet 9.5' Length Chrome Polished Stainless Steel Exhaust Tailpipe Tip, 2 1/2 Inch Double Layer Staggered Exhaust Tip, Weld-On

  • universal fits 2.5″ outer diameter of trucks car exhaust tailpipe (note: please measure dimension to make sure it will fit before purchasing).
  • Anti-deformation & rustproof: built from high-strength stainless steel, our exhaust tips perfectly decorate your tailpipe system with polish stainless surface.
  • effectively anti-corrosive, avoid rust and deformation for enhanced durability.
  • Stylish & pleasant-sounding: the thicker inner wall design make your car sounds rumble and crackle for a more powerful and unique sound while giving your car a new & sporty appeal.
  • Easy installation: weld-on design, double layer wall, slant angle cut, rolled edge.
  • Maintenance tips: please routinely clean off the debris, cement, oil, dust and dirt on the surface or the interior of the exhaust tips since good maintenance ensures a longer service life of exhaust tips (NOTE: Professional installation would be highly recommended).
Check Stock

Universal 4 Turbo Dual Smoker Diesel Exhaust Stack T Pipe System with 2Pcs 4 Inlet 8 Outlet Gloss Black Stainless Steel Miter Angle Cut Diesel Smoker Stack Tips

  • Universal 4" Turbo Dual Smoker Diesel Exhaust Stack T Pipe Kit + 4"Inlet 8"OutLet Cut Stack Tips Gross Black.
  • Designed For Chevy/Dodge/Ford Full Size Pickup Truck.
  • Smoke kits:T409 Stainless Steel & Coated Black.
  • Cut Exhaust Stack Tip：Inlet: 4" (101.6mm), Outlet: 8" (203.2mm), Total length: 36" (914.4mm) Gloss Black Finish.
  • Professional installation is highly recommended.
  • Package includes1 Set Smoke kit with 2 Cut Exhaust Stack Tip.
Check Stock

Caltric Exhaust Pipe Gasket Compatible With Suzuki Dr-Z400 Dr-Z400E Dr-Z400S Dr-Z400Sm 2000-2017

  • This angle is not always present on the competitions exhaust tips as it is more time consuming to manufacture..
  • This Billet exhaust tip fits on the end of your OEM Yamaha exhaust system increasing your rides overall performance and sound..
  • This angled outlet directs the exhaust fumes down and away from fenders and tailgates..
  • This power tip can be used either with or without the stock exhaust screen..
Check Stock

LucaSng Universal 5' Turbo Dual Smoker Diesel Exhaust Stack T Pipe System with 2Pcs 5' Inlet 8' Outlet Gloss Black Stainless Steel Miter Angle Cut Diesel Smoker Stack Tips

  • Universal 5" Turbo Dual Smoker Diesel Exhaust Stack T Pipe Kit + 5"Inlet 8"OutLet Cut Stack Tips Gross Black.
  • Designed For Chevy/Dodge/Ford Full Size Pickup Truck.
  • Smoke kits:T409 Stainless Steel & Coated Black.
  • Cut Exhaust Stack Tip：Inlet: 5" (127mm), Outlet: 8" (203.2mm), Total length: 36" (914.4mm) Gloss Black Finish.
  • Professional installation is highly recommended.
  • Package includes1 Set Smoke kit with 2 Cut Exhaust Stack Tip.
Check Stock

AUTOSAVER88 3 Inch Inlet Black Exhaust Tip, 3' Inlet 4' Outlet 12' Overall Length Stainless Exhaust Tips Powder Coated Finish Tailpipe, Universal Fit for 3' O.D. Tailpipe, Rolled Edge, Bolt/ Clamp On

  • Dimension: standard 3″ x 4″ x 12″(inlet, outlet, and overall length).
  • ONLY universal fit for vehicles with 3-inch outlet diameter exhaust pipes (please make sure the Outer Diameter of your vehicle tailpipe outlet is 3″ before purchase).
  • Anti-deformation & rustproof: built from high-grade stainless steel, our exhaust tips effectively resist heat, rust and deformation to protect & decorate your tailpipe system well.
  • plus, a drainage hole helps drain water to prevent rust.
  • Stylish & pleasant-sounding: sleek 20-degree rolled-edge angle cut and thicker inner wall design, make your car sounds rumble and crackle for a more powerful and unique sound, meanwhile, the Black Powder Coated Finish offer your car with a elegant and mysteriou appeal.
  • Easy installation: the bolt/ clamp-on design makes it super easy to fasten to your exhaust pipe with M6 Allen Key, no drilling or welding needed.
  • Daily Maintenance: To make this exhaust tip has a long-life service – Please Sweep away the welding debris, cement, oil, white ash, putty, sand ash regularly to keep the surface clean. We recommend to do above action once a month (NOTE: Professional installation would be highly recommended).
Check Stock

AUTOSAVER88 3 Inch Exhaust Tip, 3' Inlet 4.5' Outlet 9' Overall Length Chrome-Plated Finish Tailpipe Stainless Steel Exhaust Tips for 3' O.D. Tailpipe, Rolled Edge Slant Angle Cut, Bolt On, Universal

  • Dimension: standard 3″ x 4.5″ x 9″ (inlet, outlet and overall length).
  • ONLY universal fit for vehicles with 3-inch outlet diameter exhaust pipes (please make sure the Outer Diameter of your vehicle tailpipe outlet is 3″ before purchase).
  • Anti-deformation & rustproof: built from high-grade stainless steel， our exhaust tips effectively resist heat, rust and deformation to protect & decorate your tailpipe system well.
  • plus, a drainage hole helps drain water to prevent rust.
  • Stylish & pleasant-sounding: sleek degree rolled-edge angle cut and thicker inner wall design make your car sounds rumble and crackle for a more powerful and unique sound.
  • meanwhile, the chrome-plated finish would give your car a new & sporty appeal.
  • Easy installation: the bolt/ clamp-on design makes it super easy to fasten to your exhaust pipe with M6 Allen Key, no drilling or welding needed.
  • Daily Maintenance: To make this exhaust tip has a long-life service – Please Sweep away the welding debris, cement, oil, white ash, putty, sand ash regularly to keep the surface clean. We recommend to do above action once a month (NOTE: Professional installation would be highly recommended).
Check Stock

AUTOSAVER88 1.75-2.25 Inch Adjustable Dual Exhaust Tip, 1.75'-2.25' Inlet 3' Outlet 8.66' Long Stainless Steel Double Layer Exhaust Tail Tip for 1.75'/2.0'/2.25' O.D. Tailpipe, Bolt On, Black Plating

  • Dimension: 1.75-2.25 inch adjustable inlet diameter.
  • universal fits 1.75″/2.0″/2.25″ outside diameter exhaust pipes whatever its Year/Make/Model is (Note: please measure dimension to make sure the outside diameter of your tailpipe is between 1.75-inch and 2.25-inch before purchasing).
  • Anti-deformation & rustproof: built from high-strength stainless steel, our exhaust tips perfectly decorate your tailpipe system with polish stainless surface.
  • effectively anti-corrosive, avoid rust and deformation for enhanced durability.
  • Stylish & pleasant-sounding: the thicker inner wall design make your car sounds rumble and crackle for a more powerful and unique sound, meanwhile, the light black plating finish gives your car a new & sporty appeal.
  • Easy installation: Bolt-on design, double layer wall, slant angle cut, rolled edge.
  • Maintenance tips: please routinely clean off the debris, cement, oil, dust and dirt on the surface or the interior of the exhaust tips since good maintenance ensures a longer service life of exhaust tips (NOTE: Professional installation would be highly recommended).
Check Stock

4 inch Inlet Diesel Truck Tailtip, 8 inch Outlet Exhaust Tip, 15 inch Length Muffler Tip, Rolled End Angle Cut

  • Dimension: standard 4" x 8" x 15"(inlet, outlet and overall length).
  • ONLY universal fit for vehicles with 4-inch outside diameter exhaust pipes (Notice: Please make sure the Outside Diameter of your vehicle tailpipe outlet is 4.0" before purchase).
  • Anti-deformation & rustproof: built from high-grade stainless steel, our exhaust tips effectively resist heat, rust and deformation to protect & decorate your tailpipe system well.
  • plus, a drainage hole helps drain water to prevent rust.
  • Stylish & pleasant-sounding: sleek degree rolled-edge angle cut and thicker inner wall design, make your car sounds rumble and crackle for a more powerful and unique sound, meanwhile, the chrome-plated and polished finish would make your car tailpipe shine brightly.
  • Easy installation: the bolt-on design makes it super easy to fasten to your exhaust pipe with M8 Allen Key, no drilling or welding needed.
  • Daily Maintenance: To make this exhaust tip has a long-life service - Please Sweep away the welding debris, cement, oil, white ash, putty, sand ash regularly to keep the surface clean. We recommend to do above action once a month (NOTE: Professional installation would be highly recommended).
Check Stock

IFOKA Exhaust Tip 2.5 Inch Inlet 2.5 Inlet 2.5 Outlet 9 Long Black Exhaust Tips Turn Down Diesel Stainless Steel Powder Coated Finish Tailpipe Extension Bolt On Design Pipe Down

  • Dimension: Black exhaust tips 2.5" inlet, 2.5 inches outlet, 9 inches overall length. Universally compatible with vehicles which have exhaust pipes....
  • Material: Stainless steel with black powder-coated surface treatment, prevent corrosion, high-temperature resistance, and not easy to scratch & fall....
  • Easy to install: Before the installation, cleaning the tailpipe and exhaust tips are necessary. The bolt on design make it easy to install, and not....
  • Unique Driving Experience: Angle cut and turn down design, more thicker inner waller design makes the vehicle sounds rumble and crackle, give you the....
  • Rustproof Design: Angle cut on the bottom of the exhaust tip, not easy to accumulate water and avoid rust effectively. In order to prolong the service....
Check Stock

Exhaust Tips Stainless Steel, Car Exhaust Tail Muffler Tip Pipes Muffler Modification, Inlet 2.5″ Outlet 3.2″ Polished Finished Tail Pipe, Auto Replacement for Most Cars Sedans Trucks (Black/Straight)

  • 【Protect Exhaust Pipes】: This tail pipe protects your original exhaust pipe, prevents it from deformation, and protect it from rain, dust and sand. It also cancels noise. With this exhaust pipe protector, you will have a better driving experience. There is a small hole at the bottom of the tip that can be used to drain water, with this hole there will be no standing water..
  • 【Car Decoration】: This exhaust tips is available in two colors, matte black and gold, this exhaust pipe is beautiful and generous, can decorate your car well and make it look more stylish. After installing this exhaust pipe, your car will look very sporty, the black one is understated and generous, the gold one is stylish and dynamic..
  • 【Dimensions】: The length of it is 5.7″, inlet size is 2.5 inch while outlet size is 3.2 inch. It is suitable for straight pipe models with an exhaust pipe diameter of less than 2.5″. Crimmed and angled cut design, black powder coated. There are two kinds of exhaust tips for you to choose, straight shaped and curved shape exhaust pipes can totally meet your demand..
  • 【Material】: This exhaust pipe is made of stainless steel with slanted tip shape. Due to its stainless steel material, it is durable and corrosion resistant. It protect yo....
Check Stock