Categories

Best Exhaust Mounting Kit

Vance & Hines Replacement Baffle for Straightshot Performance Exhaust Systems 21877

  • Typically Reduce Sound Output by 2-3 db,Nice Aftermarket Replacement.
  • Dimension:7.75*2.1 Inch (Length*OD*),Pls Confirm the Inner Diameter of your Exhaust Pipe before Purchasing, Note: Not Fit for 2009 FXSTSSE.This Quiet Baffle is Hand-made and Wrapped in the Middle Part,pls Allow Minor Differences of the Measurement.
  • Quiet Baffle is Wraped by Silencer Cotton+Aluminum Foil ,it can be directly used on your bike,No Mounting Bolts Included.
  • Notes: It is recommended that new exhaust gaskets and a proper jet kit be installed when changing an exhaust system on a carburated motorcycle, or new exhaust gaskets and a digital fuel processor when changing an exhaust system on a fuel-injected motorcycle. Discoloration (bluing) is caused by tuning characteristics, like cam timing, carb jetting, etc., and is not caused by defective manufacturing..
Check Stock

Air Conditioner Sounds & Rings

  • Incl. Air Compressor/Valve Assay/Air Tubing/Adapter/Toggle Switch Kit/Regulator And Control Assay/Mounting Hardware.
Check Stock

YHMTIVTU 2.1\ Quiet Baffle Exhaust Pipe Muffler Silencer Universal Fit for Motorcycles 1 Pair

  • Typically Reduce Sound Output by 2-3 db,Nice Aftermarket Replacement.
  • Dimension:7.75*2.1 Inch (Length*OD*),Pls Confirm the Inner Diameter of your Exhaust Pipe before Purchasing, Note: Not Fit for 2009 FXSTSSE.This Quiet Baffle is Hand-made and Wrapped in the Middle Part,pls Allow Minor Differences of the Measurement.
  • Quiet Baffle is Wraped by Silencer Cotton+Aluminum Foil ,it can be directly used on your bike,No Mounting Bolts Included.
  • Notes: It is recommended that new exhaust gaskets and a proper jet kit be installed when changing an exhaust system on a carburated motorcycle, or new exhaust gaskets and a digital fuel processor when changing an exhaust system on a fuel-injected motorcycle. Discoloration (bluing) is caused by tuning characteristics, like cam timing, carb jetting, etc., and is not caused by defective manufacturing..
Check Stock

28mm Exhaust Muffler Silencer Pipe Assembly for CRF50 XR50 GY6 70cc 110cc 125cc SSR SR110 Rocketa Taotao DB14 DB10 xpro DB-x20 SDG Coolster Pit Dirt Bike Motocross - Red

  • 【Wide Applicability】The exhaust system fits CRF50 XR50 CRF50F, and their copies 70cc-125cc bikes from China, such as SSR, YCF, IMR, Atomik, x-pro, Baja, Motovox, TTR, Thumpstar, BSE, Kayo, Stomp, Piranha, DHZ, GPX, Pitster Pro, SDG, Braaap, Taotao, Coolster, Roketa, Lifan, YX, ect.
  • 【Precisely Designed】Corrosion resistant chrome plated, steel exhaust pipe is precisely bent to fit your vehicles spacing and engine output requirements.
  • 【Upgraded Material】Integrated ventilated scald guard helps prevent burns in areas where rider’s legs may contact the exhaust pipe.
  • 【Superb Heatproof Coating】The exterior is finished with premium paint that withstands high temperatures well. The paint won't easily peel off so your dirt bike exhaust will look like new for a long time.
  • 【Complete Kit】The package includes 1 x muffler, 1 x chrome plated steel exhaust pipe, 1 x aluminum mounting clamp, 1 x stainless steel mounting bolt, 1 x corrosion resistant painted lock nut, 2 x stainless steel lock nuts, 2 x copper compression header gaskets.
Check Stock

80mm Black Fan Grill/Guard

  • Designed to be installed into cabinets or walls to help increase ventilation.
  • Can also be used in conjunction with a fan system to act as an intake or exhaust vent..
  • Includes optional hardware to secure two 80mm fans onto the grille, and mount it into your cabinet or wall..
  • Features a CNC machined aluminum frame with a brushed black finish.
  • Kit includes (4) wood mounting screws, (4) machine mounting screws with nuts, (8) fan mounting screws with nuts, and (2) 80mm spiral fan guards..
Check Stock

FMF Fatty Pipe - 2-Stroke Compatible with 05-19 Yamaha YZ125

  • 【Fitment】For most 50cc 110 125cc Chinese Dirt Pit Bike QUAD ATV 4 Wheeler Dune Buggy.
  • 【Size】:Mounting Hole Distance: 28mm / 1.1 inches， Length : 244 mm / 9.61 inches， width : 85.5 mm / 3.37 inches..
  • 【Package Contents:】 1 x Exhaust Muffler， 1 x Exhaust head pipe， 1 x metal clip， 2 x gasket， 1 x Screw kit..
  • 【Note】Please check carefully the item pictures, model and size before purchasing. Or leave us messages for assistance if you are not sure about the fitment..
Check Stock

Savant PCs ROG 120mm Case Fan Radiator Grill Cover Black

  • Designed to be installed into cabinets or walls to help increase ventilation.
  • Can also be used in conjunction with a fan system to act as an intake or exhaust vent.
  • Includes optional hardware to secure three 120mm fans onto the grille, and mount it into your cabinet or wall.
  • Features a CNC machined aluminum frame with a brushed black finish.
  • Kit includes (4) wood mounting screws, (4) machine mounting screws with nuts, (12) fan mounting screws with nuts, and (3) 120mm spiral fan guards.
Check Stock

Ambienceo Complete Engine 125cc 4 Stroke 1P52FMI-K (124cm3) Dirt Bike Engine Motor Carb Complete Kit for Honda XR50 CRF50 XP CRF 50 70

  • Lifan 1P54FMI 125cc engine, Gears: N-1-2-3-4, Automatic clutch with 15T 428 chain sprocket, Shaft size: 20mm.
  • Has the standard mounting points, fit basically any monkey/dax/supercub/pitbike.
  • Replacement / upgrade for Trail Bike CT70 90 110 125 and other most popular bikes.
  • Comes with: engine, carburetor kit, exhaust pipe kit, chain & sprocket, throttle kit, wiring narness & electrical components.
  • Please check the mounting hole spacing before buying.
Check Stock

BLACKHORSE-RACING 3 Inch 76mm Stainless Steel V Band Bolt Clamp with 2 Male Female Flanges for Turbo Pipes SS V-Band Flange Kit

  • ▲ 3 INCH STAINLESS STEEL EXHAUST CLAMP KIT – Complete V-band kit is ideal for performance exhaust systems, catback exhausts, turbo back exhausts and more..
  • ▲ COMPLETE 3 PIECE KIT – This complete 3inch Vband kit includes 1x 3″ V-Band clamp which is designed to accommodate the 2x stainless steel 3″ Vband flanges.
  • 1 male flange and 1 female flange. This allows for the flanges to properly align during installation to insure a leak free seal..
  • ▲ DESIGNED FOR 3″ EXHAUST PIPES – This kit is specifically designed for 3″ exhaust pipes. The flanges feature a recessed opening which allows for a 3″ exhaust to easily slip inside the flange, providing a perfect overlap seam for welding..
  • ▲ PERFECT FOR TURBO AND HIGH HORSEPOWER VEHICLES – If you’re making a catback exhaust, turbo back exhaust, mid pipe, or up pipe for your car, truck, or other vehicle this V-band kit is ideal for connecting different pipe sections. Conventional exhaust flanges multiple nuts, bolts, washers and a gasket. A V-band kit eliminates all of these and allows for a connection with a single nut..
  • ▲ EASY ON, EASY OFF – A V-band kit allows you to connect or disconnect sections of your exhaust by removing a single nut. Conventionally exhaust flanges involve multiple ....
Check Stock

Zeda 80 Performance Bicycle Engine Kit with Dio Reed Valve & OKO Carb - Silver - Motorized Bike (36 Tooth)

  • Take your 2-stroke motorized biking to the next level with this complete Dio performance kit including the engine, mounting hardware, and stock exhaust pipe.
  • The included Dio reed valve, OKO carb, K&N style air filter (or optional velocity stack), and modified Dio cylinder round out this performance package that will yield tons of torque and increased speed.
  • For even more power and performance it can also be paired with our Zeda88 performance pipe (select from the drop down above).
  • or pick up a Dio Upgrade Kit for just $99.
  • Kit includes: 2.95 HP 2-stroke engine, modified Dio cylinder with piston, 21mm OKO flat side carburetor, 6 flap Dio reed valve, K&N style mesh air filter.
  • Performance parts: stainless steel allen bolts, enhanced balanced crank, upgraded bearings + 60% thicker crank case around bearings, stuffed crankcase, large intake port (40mm bolt hole width), round exhaust port 40mm crank stroke (more powerful, efficient, and reliable), type B piston (high wrist pin), long rod (89mm).
Check Stock

BLACKHORSE-RACING 4 Inch V Band Clamp with Stainless Steel Flange 4 Inch V Band Bolt Clamp with 2 Male Female Flanges for Turbo Pipe Performance Exhaust Sysformance Exhaust Pipes

  • √ 4 INCH STAINLESS STEEL EXHAUST CLAMP KIT - Complete V-band kit is ideal for performance exhaust systems, downpipes, catback exhausts, turbo back....
  • √ COMPLETE 4 PIECE KIT - This complete 4inch Vband kit includes 1x 4" V-Band clamp which is designed to accommodate the 2x stainless steel 4" Vband....
  • √ DESIGNED FOR 4" EXHAUST PIPES - This kit is specifically designed for 4" exhaust pipes. The flanges feature a recessed opening which allows for a....
  • √ PERFECT FOR TURBO AND HIGH HORSEPOWER VEHICLES - If you're making a downpipe, catback exhaust, turbo back exhaust, mid pipe, or up pipe for your....
  • √ EASY ON, EASY OFF - A V-band kit allows you to connect or disconnect sections of your exhaust by removing a single nut. Conventionally exhaust....
Check Stock

TDPRO Full Set of Lifan 125cc Engine Semi-Auto 4 Stroke Motor with Wiring Harness Carburetor Chain Sprocket Exhaust Muffler Pipe for Trail Bike CT70 90 110 125 Dirt Bike Trike

  • Lifan 1P54FMI 125cc engine, Gears: N-1-2-3-4, Automatic clutch with 15T 428 chain sprocket, Shaft size: 20mm.
  • Has the standard mounting points, fit basically any monkey/dax/supercub/pitbike.
  • Replacement / upgrade for Trail Bike CT70 90 110 125 and other most popular bikes.
  • Comes with: engine, carburetor kit, exhaust pipe kit, chain & sprocket, throttle kit, wiring narness & electrical components.
  • Please check the mounting hole spacing before buying.
Check Stock

AC Infinity Ventilation Grille, for PC Computer AV Electronic Cabinets, also mounts one 120mm Fan

  • Designed to be installed into cabinets or walls to help increase ventilation.
  • Can also be used in conjunction with a fan system to act as an intake or exhaust vent.
  • Includes optional hardware to secure a 120mm fan onto the grille, and mount it into your cabinet or wall.
  • Features a CNC machined aluminum frame with a brushed black finish.
  • Kit includes (4) wood mounting screws, (4) machine mounting screws with nuts, (4) fan mounting screws with nuts, and (1) 120mm spiral fan guard..
Check Stock