Categories

Best Exhaust Nut And Studs

Transmission Gear Set GY6 150cc For Scooter, ATV, Buggy or Go Kart

  • Fit for GY6 GMB139 Engine 50cc 70cc 90cc 110cc 125cc 150cc Scooters ATVs Go Karts Moped Quad 4 Wheeler Dune Buggy. It may fits Chinese Scooters with GY6 50cc - 150cc Motors Sandrail Taotao Sunl Coolster Jonway Roketa etc.
  • Bolt to bolt spacing: 49mm, Inner port: 27 mm, Double Sided, Double layer Extra Thick! Your exhaust will makes no more noise!.
  • Exhaust Studs: 35mm/1.38inch Long, 5.7mm/0.22inch Thread M6. Nuts/Caps: 32mm Long/1.26inch, 5.1mm/0.2inch Thread M6. Bronze Gasket: Outside Diameter 30mm/1.18inch, Inside Diameter 21.7mm/0.85inch, 4.3mm/0.17inch Thickness..
  • Package includes 2 x Exhaust Studs 2 x Nuts 1 x Exhaust Gasket 2 x Spring Gasket 2 x Gasket 1x Extra Thick Gasket.
  • Hassle-Free Return and Money Back, Shop with Confidence!.
Check Stock

Floshine 2.5 in Lap Joint Band Clamps,Exhaust Muffler Clamp 4 PCS，2.5 Exhaust Pipe Clamps preformed Stainless Steel

  • Application--2.5" Exhaust clamps are a simple and quick tool for connecting exhaust system components, such as exhaust pipes, mufflers and catalytic Flexible disassembly and assembly methods allow maintenance while protecting the exhaust pipe from being twisted.
  • No welding design--This 2.5 exhaust clamp is tightly fitted 360° to evenly withstand tensile forces and prevent deformation and leakage of the exhaust pipe.No welding design of Lap joint exhaust sleeve clamp makes installation and removal easier and faster.
  • Component parts--304 stainless steel band,steel gasket,aluminum alloy I-block and zinc-plated flange bolt and nut.Make sure that the stainless steel surface is tight against the exhaust pipe and the nut is tightened when installing.
  • Non-rusting and corrosion resistant--Floshine Exhaust clamp is used for 2.5" OD to 2.5" OD exhaust pipe,mffler,catalytic converters connection.Stainless steel material has good corrosion resistance and is not easy to rust, providing a longer service life..
  • WARRANTY--Floshine offers a 5-month warranty and we are committed to enhancing the user experience.Please feel free to contact us with any questions about the product.
Check Stock

GY6 ATV 50cc 80cc 90cc 125cc 150cc 200cc Scooter Exhaust Pipe Bolt, nut Gasket + Exhaust Pipe Gasket + Gloves

  • Applicable to GY6 ATV 50cc 70cc 80cc 90cc 125cc 150cc 200cc scooters, go karts, four-wheel pit cars and mopeds..
  • Product size: exhaust pipe nut 32mm / 1.26in long, thread M6 is 5.8mm/0.22in. Nut / cover: 32 mm long / 1.26 inch, 5.1 mm / 0.2 inch thread M6..
  • Thickened gasket, bolt spacing 49mm, inner hole 27mm, double-sided, double-layer thickness! The exhaust pipe will no longer make noise!.
  • The kit includes: 4 exhaust pipe nuts, 4 exhaust pipe bolts, 2 exhaust pipe long bolts, 6 exhaust pipe washers, 2 thickened exhaust pipe washers, 4 flat washers, 4 spring washers and gloves..
  • Please compare your parts with the pictures before purchasing..
Check Stock

BLACKHORSE-RACING 3 Inch 76mm Stainless Steel V Band Bolt Clamp with 2 Male Female Flanges for Turbo Pipes SS V-Band Flange Kit

  • ▲ 3 INCH STAINLESS STEEL EXHAUST CLAMP KIT – Complete V-band kit is ideal for performance exhaust systems, catback exhausts, turbo back exhausts and more..
  • ▲ COMPLETE 3 PIECE KIT – This complete 3inch Vband kit includes 1x 3″ V-Band clamp which is designed to accommodate the 2x stainless steel 3″ Vband flanges.
  • 1 male flange and 1 female flange. This allows for the flanges to properly align during installation to insure a leak free seal..
  • ▲ DESIGNED FOR 3″ EXHAUST PIPES – This kit is specifically designed for 3″ exhaust pipes. The flanges feature a recessed opening which allows for a 3″ exhaust to easily slip inside the flange, providing a perfect overlap seam for welding..
  • ▲ PERFECT FOR TURBO AND HIGH HORSEPOWER VEHICLES – If you’re making a catback exhaust, turbo back exhaust, mid pipe, or up pipe for your car, truck, or other vehicle this V-band kit is ideal for connecting different pipe sections. Conventional exhaust flanges multiple nuts, bolts, washers and a gasket. A V-band kit eliminates all of these and allows for a connection with a single nut..
  • ▲ EASY ON, EASY OFF – A V-band kit allows you to connect or disconnect sections of your exhaust by removing a single nut. Conventionally exhaust flanges involve multiple ....
Check Stock

1PZ MG2-EG5 Exhaust Bolt and Gasket for GY6 50cc 70cc 90cc 110cc 125cc 150cc Scooters ATVs (Black)

  • 【Compatibility】For GY6 50cc 70cc 90cc 110cc 125cc 150cc Scooters ATVs Go Karts Moped Quad 4 Wheeler Dune Buggy Sandrail Taotao Sunl Coolster Jonway Roketa.
  • 【Size for reference】 Exhaust Studs: 32mm/1.26inch Long, 5.8mm/0.22inch Thread M6. Nuts/Caps: 32mm Long/1.26inch, 5.1mm/0.2inch Thread M6. Bronze Gasket: Outside Diameter 30mm/1.18inch, Inside Diameter 23.2mm/0.91inch, 5.6mm/0.22inch Thickness.
  • 【Extra thick gasket】 Bolt to bolt spacing: 49mm, Inner port: 27 mm, Double Sided, Double layer Extra Thick! Your exhaust will makes no more noise!.
  • 【Package include】1x Exhaust Gasket, 1x Extra Thick Gasket, 2 x Exhaust Studs, 2 x Nuts, 2 x Gaskets, 2 x Spring Gaskets in a 1PZ Brand Box.
  • 【Quality Guarantee】Hassle free return, Money back guarantee, Shop with Confidence!.
Check Stock

Woodys Universal Track Hole Drill DRIL-UNIV

  • Hollow drill for 7mm or 5/16in. studs makes a precise opening for installing studs.
  • For 7mm T-nut studs and 5/16in. push-through studs use 7mm drill.
Check Stock

GY6 Exhaust kit(Nuts&Gasket&Exhaust Studs) FIT for GMB139 Engine 50cc 70cc 90cc 110cc 125cc 150cc Scooters ATVs Go Karts 4 Wheeler Moped fits Scooters with 50cc - 150cc Motors etc

  • Fitment：for GY6 GMB139 Engine 50cc 70cc 90cc 110cc 125cc 150cc Scooters ATVs Go Karts Moped Quad 4 Wheeler Dune Buggy. It may fits Scooters with GY6 50cc - 150cc Motors Sandrail Taotao Sunl Coolster Jonway Roketa etc.
  • Package include： 2 x Exhaust Studs 2 x Nuts 1 x Exhaust Gasket 2 x Spring Gasket 2 x Gasket 1 x Premium Metal Gasket.
  • Bolt to bolt spacing: 49mm, Inner port: 27 mm, Double Sided, Double layer Extra Thick! Your exhaust will makes no more noise!.
  • Durable Material: The exhaust studs nuts are made from metal, which is sturdy and can last long time..
  • Easy to install, Please Check The Size Before You Buy It..
Check Stock

2.5" Lap Joint Band Clamp Exhaust Clamps Pipe Repair Parts Stainless Steel

  • ...5" ID Pipe, made of 304 stainless steel. There are 5 sizes for choose, it can meet your various needs. reducing costs and time Significantly..
  • The lap joint clamps 2.5" are best when cosmetic appearance is important, and have a wide range used. This would include exhaust tips, mufflers, cat back systems, racing exhaust, and show cars..
  • Conforms to pipe and flex tubing, exhaust pipe connector come with an "I" block provides a full 360 °equal distribution of stretching forces, without distorting the pipe, to create the best seal available without distorting pipe, This exhaust band clamp is specifically designed for exhaust pipes connection..
  • No welding design makes lap joint clamp fast, easy and accurate installation. It is removable and reusable. just need to put one of the nut bar on one side and insert the bolts, put another nut bar on, then screw the nuts, works done..
  • SYKRSS value your shopping experience, If you encounter any problems in installing the 2.5" lap joint band clamp, you can feel free to contact us via Amazon Mail. We provide 24-hour mail s....
Check Stock

ESPEEDER 2.0" Lap Joint Band Clamp Exhaust Clamps Pipe Parts Stainless Steel 2Pcs

  • ...ade of 304 stainless steel. There are 5 sizes for choose, it can meet your various needs. Come with 2Pcs/Package. reducing costs and time Significantly..
  • The lap joint clamps 2.0 are best when cosmetic appearance is important, and have a wide range used. This would include exhaust tips, mufflers, cat back systems, racing exhaust, and show cars..
  • Conforms to pipe and flex tubing, exhaust pipe connector come with an "I" block provides a full 360 °equal distribution of stretching forces, without distorting the pipe, to create the best seal available without distorting pipe, This exhaust band clamp is specifically designed for exhaust pipes connection..
  • No welding design makes lap joint clamp fast, easy and accurate installation. It is removable and reusable. just need to put one of the nut bar on one side and insert the bolts, put another nut bar on, then screw the nuts, works done..
  • SYKRSS value your shopping experience, If you encounter any problems in installing the 2.0" lap joint band clamp, you can feel free to contact us via Amazon Mail. We provide 24-hour mail s....
Check Stock

GPP Exhaust Manifold Kit Set Compatible with 1999.5-2003 Ford 7.3L Powerstroke Diesel

  • (2) Studs (manifold to exhaust pipe flange).
  • (2) Nuts (manifold to exhaust pipe flange).
  • Interchange P/N: F81Z9431AA, F81Z 9431 AA, F81Z9430AA, F81Z 9430 AA.
Check Stock

RockTrix 2 inch Wheel Spacers (4x4 Bolt Pattern, 68.5mm Bore, 12x.1.25 Studs, Cone Seat Nuts) Compatible with Yamaha Golf Carts (Widens Track by 4 inches) - 50mm 4x101.6 4pcs

  • RockTrix Wheel Spacers fits many 4/4", 4/101.6, 4/100 Bolt Pattern Golf Carts and ATVs. Buyers need to also verify: 1) Vehicle Centerbore is no larger than 68.5mm.
  • 2) Vehicle Wheel studs and lug nuts are M12x1.25 12x1.25mm threads.
  • 3) You have 2.0" (50mm) of space between your fender and your wheel/tire.
  • 4) Your current wheel studs are shorter than 2.0" (50mm). NOTE: If your wheel studs are too long, you may need to grind/trim the stud down to fit..
  • [SPECIFICATIONS] Four (4) Wheel Spacers | Thickness: 2.0" (50mm) Wide | Bolt Pattern: 4x4" (4x101.6 or 4x100) | Hub Center Bore: 68.5mm | Stud/Nut Thread Size: 12x1.25.
  • [BENEFITS] Increases clearance to allow installation of larger or wider rims/wheels/tires. Gives your golf cart or ATV body a more aggressive stance. Improves handling characteristics and stability. [MATERIAL & MANUFACTURING] Spacers are CNC Machined to exact specifications from high quality Aerospace Billet Aluminum. Undergoes anodizing process to prevent surface corrosion and rust. Includes heat treated 10.9 grade carbon steel studs. Precise machined stud/nut threads prevents cross threading..
  • [INSTALLATION] Requires standard tire repair tools, a torque wrench, and lug socket. While installation is simple and most knowledgeable buyers can i....
Check Stock

EVIL ENERGY 2.75 Inch 2 3/4 Butt Joint Exhaust Band Clamp Sleeve Stainless Steel 2pcs

  • Joins 2.75" OD pipe to 2.75" OD pipe. Butt joint band 2.75" exhaust clamp is a simple, effective way to connect heavy-duty exhaust system components....
  • Exhaust coupler clamps are serviceable, durability and reusable. Aslo can be used to repair exhaust pipes. Wrap some exhaust heat tape on the exhaust....
  • Distributes the clamping force evenly over the entire 360° to provide tight sealing and prevent leaks and prohibit exhaust pipe distortion. No....
  • Material: 304 stainless steel band, zinc-plated flange bolt and nut, steel gasket, aluminum alloy I-block. Note: There is a flat face and arc curved....
  • EVIL ENERGY provide stainless steel exhaust clamp 3-month warranty. We value your shopping experience and strive to offer a high-quality product and....
Check Stock

Anovo Sling Swivel Studs, Wood Screw Studs

  • 【2 Design Options】: Combination wood screw studs with threaded bolt/nut swivel studs, provided opportunity for wood and synthetic compatability..
  • 【3 Thread Size】: 1/2 inch, 3/4 inch, 7/8 inch, provide 3 different ways to attach the swivel studs to your rifle..
  • 【Easy to Install】:Super easy to install on your rifle! using drill to drill hole to install screw or using threaded bolt to through hole..
  • 【High-grade Material】: Made of carbon steel, stays sturdy in the stock, provide superior durability.Surface electrophoresis process, anti-corrosion, anti-rust..
  • 【What You Get】: 4 piece 1/2 inch swivel screws,4 piece 3/4 inch swivel screws and 2 piece 7/8 inch machine screw. White spacers included. Excellent set of sling studs for rifle.Good value!.
Check Stock