Categories

Best Exhaust Tailpipe Clamp

Apeixoto 2.5 Inch Inlet Exhaust Tip 2.5″x4″x12″ Exhaust Tip Blue Burnt Chrome Plated Finish Stainless Steel with Bolt On Design

  • Function: The Apeixoto exhaust tailpipe tip is used as a a proection to your vehicle’s exhaust pipes witn an outlet diameter of 2.5 inches. It will protect your your exhaust pipe from rust and corrosion under sunlight and rain..
  • Dimensions: The Apeixoto exhaust tailpipe tip has a standard 2.5’’ x 4’’x 12’’ dimension ( Inlet, Outlet and Length ). Please note that this tailpipe tip is only fit for the vehicles that is a 2.5 inches outlet diameter exhaust pipes..
  • Design: The Apeixoto exhaust tailpipe tip is constructed with stailess steel and end is bule burnt chrome plated. And the tip has a rolled edge with nearly 20 degree cut. It makes your vehicle look much more shinny and fancy. And there is a little hole on button. It will help to drain water avoiding rust and corrosion..
  • Installation: Bolt on design and this tailpipe tip can be installed directly. Just make sure that this is is correct size for your exhaust pipes..
  • Warranty: 100% satisfaction. If you come across any issue or need any help for our Apeixoto exhaust tailpipe tip, feel free to ask and we are here to assist.
Check Stock

Apeixoto 2.75 Inch Inlet Exhaust Tip 2.75 Inches Inlet 3.5 Inches Outlet 12 Inches Long Polished Stainless Steel Exhaust Tailpipe Tip Bolt On Design

  • Function: The Apeixoto exhaust tailpipe tip is used as a a proection to your vehicle’s exhaust pipes witn an outlet diameter of 2.75 inches. It will protect your your exhaust pipe from rust and corrosion under sunlight and rain..
  • Dimensions: The Apeixoto exhaust tailpipe tip has a standard 2.75’’ x 3.5’’x 12’’ dimension ( Inlet, Outlet and Length ). Please note that this tailpipe tip is only fit for the vehicles that is a 3 inches outlet diameter exhaust pipes..
  • Design: The Apeixoto exhaust tailpipe tip is constructed with stailess steel with polished surface. And the tip has a cut edge with nearly 20 degree cut. It makes your vehicle look much more shinny. And there is a little hole on button. It will help to drain water avoiding rust and corrosion..
  • Installation: Bolt on design and this tailpipe tip can be installed directly. Just make sure that this is is correct size for your exhaust pipes..
  • Warranty: 100% satisfaction. If you come across any issue or need any help for our Apeixoto exhaust tailpipe tip, feel free to ask and we are here to assists..
Check Stock

JWWY Stainless Steel Exhaust Muffler Tail Pipe Trim Cover for 2015-2022 Dodge Charger Exterior Accessories

  • Package: There are two pieces of 2.5 inches inlet exhaust tips in the package..
  • Specifications: The Apeixoto exhaust tailpipe tip has a standard 2.5’’ x 4’’x 9’’ dimension ( Inlet, Outlet and Length ). Please note that this tailpipe tip is only fit for the vehicles that is a 2.5 inches diameter inlet exhaust pipes..
  • Material: The Apeixoto exhaust tailpipe tip is constructed with 304 stainless steel. It has a much more shinny and beautiful surface. There is a blue burnt end on the tip. It looks very fashionable and powerful. This types of stainless steel also is rust and corrosion resistant. It will keep your vehicle always in a good look..
  • Installation: Please be noted that these tailpipes are weld on designed. A professional installation would be recommended. Good installation will make the tailpipe function better..
  • Warranty: 100% satisfaction. If you come across any issue or need any help for our Apeixoto exhaust tailpipe tip, feel free to ask and we are here to assists..
Check Stock

AUTOSAVER88 3 Inch Inlet Black Exhaust Tip, 3' Inlet 4' Outlet 12' Overall Length Stainless Exhaust Tips Powder Coated Finish Tailpipe, Universal Fit for 3' O.D. Tailpipe, Rolled Edge, Bolt/ Clamp On

  • Dimension: standard 3″ x 4″ x 12″(inlet, outlet, and overall length).
  • ONLY universal fit for vehicles with 3-inch outlet diameter exhaust pipes (please make sure the Outer Diameter of your vehicle tailpipe outlet is 3″ before purchase).
  • Anti-deformation & rustproof: built from high-grade stainless steel, our exhaust tips effectively resist heat, rust and deformation to protect & decorate your tailpipe system well.
  • plus, a drainage hole helps drain water to prevent rust.
  • Stylish & pleasant-sounding: sleek 20-degree rolled-edge angle cut and thicker inner wall design, make your car sounds rumble and crackle for a more powerful and unique sound, meanwhile, the Black Powder Coated Finish offer your car with a elegant and mysteriou appeal.
  • Easy installation: the bolt/ clamp-on design makes it super easy to fasten to your exhaust pipe with M6 Allen Key, no drilling or welding needed.
  • Daily Maintenance: To make this exhaust tip has a long-life service – Please Sweep away the welding debris, cement, oil, white ash, putty, sand ash regularly to keep the surface clean. We recommend to do above action once a month (NOTE: Professional installation would be highly recommended).
Check Stock

AUTOSAVER88 3 Inch Exhaust Tip, 3' Inlet 4.5' Outlet 9' Overall Length Chrome-Plated Finish Tailpipe Stainless Steel Exhaust Tips for 3' O.D. Tailpipe, Rolled Edge Slant Angle Cut, Bolt On, Universal

  • Dimension: standard 3″ x 4.5″ x 9″ (inlet, outlet and overall length).
  • ONLY universal fit for vehicles with 3-inch outlet diameter exhaust pipes (please make sure the Outer Diameter of your vehicle tailpipe outlet is 3″ before purchase).
  • Anti-deformation & rustproof: built from high-grade stainless steel， our exhaust tips effectively resist heat, rust and deformation to protect & decorate your tailpipe system well.
  • plus, a drainage hole helps drain water to prevent rust.
  • Stylish & pleasant-sounding: sleek degree rolled-edge angle cut and thicker inner wall design make your car sounds rumble and crackle for a more powerful and unique sound.
  • meanwhile, the chrome-plated finish would give your car a new & sporty appeal.
  • Easy installation: the bolt/ clamp-on design makes it super easy to fasten to your exhaust pipe with M6 Allen Key, no drilling or welding needed.
  • Daily Maintenance: To make this exhaust tip has a long-life service – Please Sweep away the welding debris, cement, oil, white ash, putty, sand ash regularly to keep the surface clean. We recommend to do above action once a month (NOTE: Professional installation would be highly recommended).
Check Stock

AUTOSAVER88 2.5 Inch Inlet Exhaust Tip, 2.5' Inlet 4' Outlet 9' Overall Length Chrome-Plated Stainless Steel Exhaust Tail Tip for 2.5' Outside Diameter Tailpipe, Rolled Angle Cut, Bolt-On

  • Dimension: standard 2.5″ x 4″ x 9″(inlet, outlet, and overall length).
  • universal fits for vehicles with 2.5-inch outside diameter exhaust tail pipe(please make sure the outside diameter of your car tailpipe is 2.5″ before purchase).
  • Anti-deformation & rustproof: built from high-grade stainless steel, our exhaust tips effectively resist heat, rust and deformation to protect & decorate your tailpipe system well.
  • plus, a drainage hole helps drain water to prevent rust.
  • Stylish & pleasant-sounding: sleek 20-degree rolled-edge angle cut and thicker inner wall design, make your car sounds rumble and crackle for a more powerful and unique sound, meanwhile, the chrome-plated finish offers your car with a bright shine and nice appeal.
  • Easy installation: the bolt/ clamp-on design makes it super easy to fasten to your exhaust pipe with M6 Allen Key, no drilling or welding needed.
  • Daily Maintenance: To make this exhaust tip has a long-life service – Please Sweep away the welding debris, cement, oil, white ash, putty, sand ash regularly to keep the surface clean. We recommend to do above action once a month (NOTE: Professional installation would be highly recommended).
Check Stock

SYKRSS Exhaust Tip Universal 2.5 Inlet 3 Outlet 12 Length Bolt Clamp On Design Stainless Steel Polished Diesel Exhaust Tail Pipe Tip

  • 2.5 inch inside diameter inlet, 3 inch outside diameter outlet, 12 inch overall length. NOTE : Universal exhaust tip fit 2.5" outside diameter pipe,....
  • Made of 304 stainless steel exhaust tip to avoid corrosion and deformation of the existing tailpipe, to prevent the heat back. black the lacquer that....
  • Clamp on design, easy to install, no drill needed. Makes it possible to remove the exhaust tip for cleaning. If you think it isn’t tight enough,....
  • Diesel exhaust tip, rolled edge and angled cut design. Perfectly decorates your vehicle. The unique styling adds a high-performance feel and look to....
  • SYKRSS value your shopping experience, If you encounter any problems in installing the exhaust tail pipe tip, you can feel free to contact us via....
Check Stock

ABN Exhaust Pipe Expander Tool - Tail Pipe Expander Exhaust Expander, Exhaust Pipe Stretcher Kit 1-5/18 to 4-1/4 Inch

  • [Increase Engine RPM]: Expanding your tailpipe with the ABN Exhaust Tube Expander Tailpipe Expander Kit to increase exhaust volume and to give you more power for your engine.
  • [Easy to Use]: Lubricate all parts of the exhaust pipe bender stretch tool and attach correct sleeve.
  • Insert pipe spread tool into pipe, connect to existing drill, and expand.
  • Pipe might need to be warmed during winter months to prevent damage while using exhaust flare tool.
  • [Expand Most Metals]: Tailpipe expander tool kit great for all types of pipes, from aluminum to stainless steel.
  • Exhaust pipe expanding tool can expand piping from 1-5/18 to 4-1/4 inches (3.3 to 10.8cm).
  • [Easy Storage]: HVAC pipe expander parts come in a plastic storage case to keep the steel and copper pipe expander kit organized.
  • [Contents]: Exhaust pipe expansion tool kit includes a 3/4-inch and 1/2-inch (1.9 and 1.3cm) shank collet expander chuck, 5 expander sleeves, and 2 packs of black rubber O ring replacements.
Check Stock

Dsycar Universal 1.5-2.25 Inch Adjustable Inlet Exhaust Tips, Bolt-On Design Chrome Plated Stainless Steel Exhaust Tailpipe Tips (Silver Curved )

  • 【 Note 1 】Only fit 1.5’’-2.25’’ inlet pipes, please measure the outlet diameter of your pipe prior before purchase this exhaust tip. ( For all tailpipes, if the outlet size is 1.5 - 2.25 inch, then this exhaust tip can fit, no matter of your Year/Make/Model).
  • 【 Note 2 】Please check your original tailpipe's type. Straight tailpipe is for straight type, and curved tailpipe is for curved type. This one is suitable for curved exhaust pipes. (Pay attention: This exhaust tip is oval outlet, not round outlet).
  • 【 Note 3 】View product details with image,Understand the installation and size of the product, can view the other seven exhaust pipe products,Choose the right product size and your favorite color..
  • 【Easy to Install】 There is no need to replace any parts,No weld needed. No drill needed.Super Easy to Install! Three Bolt Fit the tip to your Pipe..
  • 【Car Decoration】Surface polishing process. More Car decoration can search Dsycar. Tips again, please measure your exhaust pipe diameter to make sure our products fit your vehicle..
Check Stock

Exhaust Tip 2.5 Inlet 6 Outlet 8 Long Black Coated inish Muffler Tip for Truck Tailpipe Stainless Steel Rolled Edge 2.5 inch for A6 Black Coating 2 Pair

  • 2.5" ID EXHAUST TIP: 2.5" inlet diameter 6" outlet diameter 8" overall length, universal fits 2.5" outer diameter tailpipe..
  • MATERIAL: Made of stainless steel to protect the existing tailpipe from corrosion and deformation. Black coating prevents rain erosion..
  • APPEARANCE: The pure and elegant black exterior can perfectly decorate your vehicle..
  • EASY TO INSTALLATION:welding is required for installation,perfectly decorate the exhaust pipe of your car..
  • NOTE: Only Fits 2.5 Inch Outside Tailpipe. Please check the size of your vehicles tailpipe before purchasing..
Check Stock

Milwaukee 48-38-0010 Cutter Wheel 2-Pack Sold as 4 Pack

  • CUT ON OR OFF THE VEHICLE: Get a clean cut with minimal rough edges or burrs on your exhaust pipe or tailpipe with our pipe cutters.
  • EFFECTIVELY CUT TAILPIPES: Work on tailpipes and exhaust pipes with diameters ranging from 3/4" to 3-1/4" (19-83 mm).
  • EASY TO USE: Cut pipe with our pipe cutter tool in four easy steps.
  • Wrap chain around the pipe, hook the chain onto the plier jaw, close plier jaw....
  • NO POWER TOOLS NEEDED: Breaking out the Sawzall or angle grinder is unnecessary with our exhaust cutter tool.
  • Work in cramped spaces with one-handed....
  • BUILT TO LAST: This quality metal pipe cutter's cutting wheels won’t dull easily during use.
  • The head of the exhaust cutting tool won’t bend from....
Check Stock

BTSHUB Pipe Stretcher Kit, 28mm Exhaust Pipe Expander Stretcher Tool Set, 1-5/8 to 4-1/4 Inches, Expander Tool for Tail Pipe Tube

  • [Increase Engine RPM]: Expanding your tailpipe increases exhaust volume, which increases vehicle RPM to give you more power for your engine.
  • The Exhaust Hanger Tool easily expands pipes with ease,.
  • [Professional tools] The pipe stretcher kit provides the handy collets and expander required to stretch tailpipes before making tight seals to pipes with smaller diameters. Expanding your tailpipe increases exhaust volume, which increases vehicle RPM to give you more power for your engine.
  • Perfect for home DIY or professional auto shops..
  • [Easy to Use]: Simply lubricate all parts of the exhaust expander tool, attach sleeves as needed, insert pipe spreader into the pipe, connect to existing drill, and expand away.
  • Pipe might need to be warmed during winter months to prevent damage while using tube expander. Use a 1/2" or 3/4" impact wrench to save even more effort..
  • [Wide Application ]: Tailpipe expander kit great for all types of pipes, from aluminum to stainless steel.
  • The exhaust pipe stretcher offers various collets for a broad expansion range from 1-5/8" to 4-1/4"..
Check Stock

Exhaust Tip 3 inch Inlet, MONOKING 3 inch Exhaust Tip Stainless Steel Black Tailpipe for Truck Cars 3' Inlet 4' Outlet 12' Long Bolt On

  • EXHAUST TIP 3 inch inlet -Universal fits 3” Outer diameter tailpipe. NOT fit 3” Inner diameter pipe. 3″ inlet diameter, 4″ outlet diameter, 12″ overall length. If your tailpipe has a 3” OUTER diameter it will fit perfectly.
  • POWERFUL SOUND – 3 inch Exhaust Tips improved powerful sound and distinctive style. 20 Degree of the angle end, slant cut design, Classic Black exterior improved appearance of your tailpipes. Made your car will seem skin to a sports car or at least a car with a modified engine.
  • DURABLE MATERIAL- 3in Exhaust Tip made from Sturdy 304 Stainless Steel not easy to fall off, also avoid rusting and deformation. A small hole on bottom of tip to drain water smoothly, avoid rusting.
  • BOLT ON INSTALL – Holds up long time! Direct Bolt-on, it takes only 2 minutes easy to install. No welding or drilling is needed, just slide the tip into place on the tailpipe and tighten screws with a 6mm allen wrench.If you think it isn’t tight enough, additional welding will be a nice safeguard.
  • PACKAGE CONTENT – Package comes with 1x Exhaust Tip 3 inch inlet. MONOKING Universal black Exhaust Tips 3 inch inlet enjoy 1 YEAR warranty plus lifetime tech support and customer service. Ship from U.S. and arrive within 2-3 days.
Check Stock