Categories

Best Exhaust Valve

2.5 inch 63mm Stainless Steel Electric Exhaust Cutout Motor E-cut Valve Kit , Catback Single Y Pipe with One Controller Remote Kit

  • Cut Out Exhaust Pipe Fits For 2.5"/63mm exhaust system.
  • Design to Instantly Increases 20-30 horsepower. Aggressive deep sound while ensures smooth exhaust gas flow. Electrically controlled exhaust valves outflow, simply by flipping the switch..
  • Electric Exhaust Cutout.Voltage: 12V. Temperature: 0℃-150℃. If below -5℃, the oil in the motor will be frozen and causing the butterfly valve to be stuck. the valve motor is NOT WATERPROOF, Please don't start work in heavy rain or extremely cold weather.
  • Pipings-Made of high quality T-304 stainless steel with computerized. Mandrel-Bends for strength and durability..
  • 2.5 Inch Electric Exhaust Cutout Valve Kit For all types of vehicles. pls make sure you have enough space to install it. Professional installation is highly recommended.
Check Stock

Edelbrock 60779 Performer RPM Cylinder Head

  • 63cc combustion chamber along with a 171cc intake port.
  • High-flow 2. 02" intake valve and 1. 60 exhaust valve.
  • Includes phosphor-bronze valve guides, interlocking ductile iron valve seats.
  • Intake and exhaust runners are CNC-machine profiled for superior flow and performance.
  • Improved power throughout the RPM range for greater throttle response and top-end horsepower.
Check Stock

E1840P Sloppy Mechanics Stage 2 Camshaft LS7 Lifter 1218 Valve Spring Head Gaskets Bolts Kit for 1997-2007 LS LS1 5.3L 5.7L Engine

  • Cam and lifter kit include: 1 intake seal set, 1 timing cover gasket set, 1 valley cover gasket, 1 oil pan gasket, 2 exhaust manifold gaskets, 1 rear main seal, 1 rear main cover gasket, 2 multilayer steel cylinder head gaskets, 30 cylinder head bolts, 16 ls7 valve lifters, 16 beehive valve springs, 1 e-1840-p camshaft.
  • E1840P camshaft kit fit for 1997-2007 GM Chevy LS L92 L99 5.3L 5.7L V8 LSx Sloppy Stage 2.
  • 16pcs valve springs: outside diameter of outer spring (in): 1.290 in.
  • inside diameter of outer spring (in): 0.885 in.
  • We offer you a 12-month warranty. Any problems, just contact us through email, we ....
Check Stock

Blow off valve mod plug Turbo Hiss compatible for ford 13-21 F150 Ecoboost 3.5l 2.7l VTA(black)

  • 【Compatible Models】Precision Machined Aluminum Billet Plug for 2013-2020 Ford F150 2.7 or 3.5 E, Note: This does not apply to 2012 F150, they use a different configuration with 2 mechanical exhaust valves.
  • 【Use】Using this vent valve plug, you can vent hot pressurized to atmosphere, reducing inlet temperature and improving overall performance over the entire operating range. You get clean exhaust valve sound and better performance without recirculating hot air and introducing unnecessary heat into the engine..
  • 【Easy Installation】There is a large hose connecting the intake system to the exhaust valve with quick connect, snap-on/snap-on coupling. To install this plug, simply release the quick connect fitting from the bleed valve (located on the bottom drive side corner of the intercooler, behind the front bumper), snap into this precision machined plug, and zip the hose to the blower The gas top closes the valve outlet so it doesn't toss. That's it, the VTA mode is complete!.
  • 【DESIGN】This VTA mod allows you to vent hot boost into the atmosphere instead of recycling it and producing a hotter inlet temp....
Check Stock

BUSIDN 3 inch 76mm Stainless Steel Electric Exhaust Cutout Motor E-cut Valve Kit , Catback Single Y Pipe with One Controller Remote Kit

  • Design to Instantly Increases 20-30 horsepower. Aggressive deep sound while ensures smooth exhaust gas flow. Electrically controlled exhaust valves outflow, simply by flipping the switch..
  • Voltage: 12V. Temperature: 0℃-150℃. If below -5℃, the oil in the motor will be frozen and causing the butterfly valve to be stuck. the valve motor is NOT WATERPROOF, Please don’t start work in heavy rain or extremely cold weather.
  • Pipings-Made of high quality T-304 stainless steel with computerized. Mandrel-Bends for strength and durability.
  • 3.0 Inch Electric Exhaust Cutout Valve Kit For all types of vehicles. pls make sure you have enough space to install it.Professional installation is highly recommended.
Check Stock

KAMSIN #1170 Pneumatic Decorative Nailer 11.7mm(7/16-Inch) Head Diameter Air Power Tack Nail Gun Finish Nailer for Upholstering, Leather Cover of Sofaofa (1170 Deco Tack Nail Gun)

  • New 877-307 Head Cap, Gasket, Exhaust Valve Replacement.
  • Compatible With: Hitachi NR83A NR83A2 NR83A2(S) NR83A3.
  • Components include: 884-110 Exhaust valve, 877-854 Gasket, 877-307 Head cap and washer set.
  • The Exhaust Valve is made of aluminum alloy and coated with rubber.
Check Stock

Mustang Carbon Fiber Trunk Spoiler, GT350 Track Pack Spoiler Carbon Fiber, 2015 Mustang GT Spoiler for 2015-2021 Rear Trunk Wing Racing Spoiler, fit V6, EcoBoost, GT and GT350 2015-21

  • 【Compatible Models】Precision Machined Aluminum Billet Plug for 2013-2020 Ford F150 2.7 or 3.5 E, Note: This does not apply to 2012 F150, they use a different configuration with 2 mechanical exhaust valves.
  • 【Use】Using this vent valve plug, you can vent hot pressurized to atmosphere, reducing inlet temperature and improving overall performance over the entire operating range. You get clean exhaust valve sound and better performance without recirculating hot air and introducing unnecessary heat into the engine..
  • 【Easy Installation】There is a large hose connecting the intake system to the exhaust valve with quick connect, snap-on/snap-on coupling. To install this plug, simply release the quick connect fitting from the bleed valve (located on the bottom drive side corner of the intercooler, behind the front bumper), snap into this precision machined plug, and zip the hose to the blower The gas top closes the valve outlet so it doesn't toss. That's it, the VTA mode is complete!.
  • 【DESIGN】This VTA mod allows you to vent hot boost into the atmosphere instead of recycling it and producing a hotter inlet temperature. T....
Check Stock

RJSPHH Stainless steel 3 inch Electric Exhaust Cutout Motor E-cut Valve Kit , Catback Single Y Pipe 1 pcs with One Controller Remote Kit

  • The pipe is made of high quality 304 Stainless Steel ,the motel beside is made of high quality aluminum alloy..
  • The electric exhaust shut-off valve kit can not only change the sound wave, but also discharge gas from the engine faster through the remote control exhaust valve, thereby reducing the burning time and increasing the horsepower time and increasing horsepower.
  • To open the cutout you simply flip the which and it will open your exhaust for a throatly rumble exhaust note..
Check Stock

GOOFIT Completed Cylinder Head Replacement for 4 Stroke Chinese TaoTao Coolster 110cc Engine ATV Pit Quad Go Kart Dirt Bike

  • intake valve mounting hole distance:45mm/1.77".
  • Exhaust valve mounting hole distance:45mm/1.77".
  • Spark plug:A7TC(Please Be Carefully Check The Goods Appearance,Size,Shape Before Ordering)..
  • Completed Cylinder Head Replacement for 4 Stroke Chinese TaoTao Coolster 110cc Engine ATV Pit Quad Go Kart Dirt Bike.Not Replacement for 125cc Cylinder Head with 23mm and 28mm Intake and Exhaust valves.
  • 52.4mm LIFAN 110CC 125cc Cylinder Engine.
  • Cylinders are used to hold gasoline and air,Where the mixture burns,Expands dramatically,And pushes the piston,Which transmits this force to the crankshaft..
  • High quality cylinder replacement part.High toughness,Corrosion resistance,Rustproof and durable.Has a good heat dissipation structure design,Providing reliable performance and long life service..
  • Warranty:We are always available to help our customers.If you are not satisfied with the order,please leave us a message.Wish you have a happy shopping experience,we are committed to providing the best service..
Check Stock

COMP Cams K12-600-4 Thumpr 227/241 Hydraulic Flat Cam K-Kit for Chevrolet Small Block

  • High performance street, stock converter ok, best with 2000+ converter and gears. Choppy/thumping idle..
  • 227/241 Duration at .050". 107 Degree Lobe Separation Angle. 0.479"/0.465" Valve Lift.
  • K Kits vary in their contents, but generally contain a camshaft, a set of lifters, valve springs, retainers, locks, valve seals, timing set, assembly....
  • Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note. Best with aftermarket converters....
Check Stock

Big Gun Exhaust 07-1132 ECO ATV Silver Slip On Exhaust for Honda,Brushed Aluminum with coated Black tip

  • Order Includes: 2x Intake Valves, 2x Exhaust Valves, 4x Valve Springs, 8x Valve Cotters.
  • We strongly suggest comparing the posted picture to the unit(s) that needs to be replaced..
Check Stock

labwork-parts Intake Exhaust Engine Valves for Ford Mazda 2.0 2.3 2.5L DURATEC DOHC 16V New

  • INTAKE VALVES: HEAD 35mm X STEM 5.5mm X LENGTH 103.5mm.
  • EXHAUST VALVES: HEAD 30mm X STEM 5.5mm X LENGTH 105mm.
  • You'll Receive 8x Intake Valve as Pictured 8x Exhaust Valve as Pictured 16x Valve Stem Seal as Pictured.
Check Stock

2Pcs Straight Aluminum Bare Cylinder Head Compatible with Chevy Small Block 302/327/350/383/400 SBC 200cc Intake 68cc

  • ▶️ High grade aluminum, bronze valve guides, hardened seats, advance port design for greater air flow.
  • ▶️ This head is 200cc intake runner with a 68cc combustion chamber, 68cc combustion chambers improve performance and retains stock compression on 1970 and earlier.
  • ▶️ Lighter than Iron Heads. Each Head weighs 10.33kg.
Check Stock