uxcell Chucking Reamer Set Lathe Machine Reamer Straight Flute Milling Cutter High Speed Steel H8 Tolerance (3mm 4mm 5mm 6mm 7mm 8mm 9mm 10mm 11mm 12mm) 10pcs

  • Chucking Reamer: Size: 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm.
  • tolerance: H8. Features just the base substrate without any additional coatings, good for wide ranges of applications.
  • Material: High-speed steel tools are with combination of hardness and toughness for wear resistance, suitable for general purpose applications.
  • Applications: Cut and remove the thin layer metal on hole surface that has been processed, mainly to improve the precision of holes and reduce the surface roughness.
  • Features: Straight flute tools allow chips to collect in the flutes and can make shallow cuts in most applications.
  • How to Use: Chucking reamers (machine reamers) are used on lathes, drill presses and screw machines. Designed for accurate reaming in stainless steel, aluminum, copper, alloy, plastic.
Check Stock

Accusize Industrial Tools Over and Under Sizes 0.1240'' Thru 0.5010'' HSS M2 Premium Chucking Reamer Set, Right Hand Cut, 14pcs/Set, 5528-SX00

  • Over & Under Sizes — 0.1240" thru 0.5010".
  • Made from premium M2 H.S.S. Chucking reamers are designed for accurate reaming in most materials using all types of equipment including screw machines, turret lathes, drill presses, and machining centers.
  • They are regularly pointed with a 45°chamfer. The straight-flute design is recommended for most general-purpose reaming.
  • Thru 1/2" diameter +.0002" -.0000". Above 1/2" to 5/8" +.0003" -.0000". Above 5/8" to 1-1/2" +.0001" -.0004.
Check Stock

Accusize Industrial Tools 29 Pc Set 1/16 to 1/2 inch by 1/64 in HSS M2 Premium Chucking Reamers Straight Flute Aluminum Case 5528-SF00

  • 29 PC Set: 1/16'' through 1/2'' By 64ths, Fractional size.
  • Made from premium M2 H.S.S. Chucking reamers are designed for accurate reaming in most materials using all types of equipment including screw machines, turret lathes, drill presses, and machining centers.
  • They are regularly pointed with a 45°chamfer. The straight-flute design is recommended for most general-purpose reaming.
  • Thru 1/2" diameter +.0002" -.0000". Above 1/2" to 5/8" +.0003" -.0000". Above 5/8" to 1-1/2" +.0001" -.0004.
Check Stock

3/8\ Expansion Reamer, Carbide Tipped, Straight Shank, 56003, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 5/16" shank diameter, For Reaming abrasive material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

1/2\ Expansion Reamer, Carbide Tipped, Straight Shank, 56005, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 7/16" shank diameter, For Reaming abrasive material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

23/32\ Expansion Reamer, Carbide Tipped, Straight Shank, 56012, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 9/16" shank diameter, For Reaming abrasive material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

29/32\ Expansion Reamer, Carbide Tipped, Straight Shank, 56018, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 3/4 " shank diameter, For Reaming abrasive material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

31/32\ Expansion Reamer, Carbide Tipped, Straight Shank, 56020, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 3/4 " shank diameter, For Reaming abrasive material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

5/8\ Expansion Reamer, Carbide Tipped, Straight Shank, 56009, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 9/16" shank diameter, For Reaming abrasive material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

5/8\ Expansion Reamer, Carbide Tipped, Tapered Shank, 56059, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • Morse taper shank #2, For Reaming Abrasive Material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

29/32\ Expansion Reamer, Carbide Tipped, Tapered Shank, 56068, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • Morse taper shank #2, For Reaming Abrasive Material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

7/8\ Expansion Reamer, Carbide Tipped, Tapered Shank, 56067, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • Morse taper shank #2, For Reaming Abrasive Material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

3/4\ Expansion Reamer, Carbide Tipped, Tapered Shank, 56063, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • Morse taper shank #2, For Reaming Abrasive Material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock