Best Extendable Plastic Down Pipe
Innovative Tip Down (for 2019 (3 Pack, Orange)
- ...ts: The storage tube, which holds the rod and base. The rod, which is 20" long. It’s stiff, but still bends for superior hooking. The base, which supports the Tip-Down, harnesses the rod, and screws into the storage tube..
- THE STORAGE TUBE IS HARD PLASTIC. It has an extendable rod holder that can be set as high as 36" or as low as 24". The extendable holder has a lanyard for easily pulling the holder out of the tube and for easy handling when moving the set-up. It slides up and down easily but will never slip. The pivot pin of the rod sits in the holder’s upper notches..
- THE ROD IS 20" and has line guides including a special line guide just above the reel to prevent spool tangles. The reel has a folding handle for easily reeling in your line and lure. Each reel can handle over 100 feet of line. When a fish strikes, the rod goes down and stays down as long as the fish is on. If the fish lets go, the rod will come back up. If the rod tips down to it's maximum position, the fish can freely take line out..
- THE BASE FETURES FOUR ROTATING LEGS that support the tip-down on the ice. Folding the legs in ....
Check StockINTSUPERMAI Pipe Cutter Round Pipe Cutting Machine Pipeline Hydraulic Ppipe Cutting Machine Electric Hydraulic Fire Pipe Galvanized Pipe Cutting Machine 220V
- Pipeline hydraulic pipe cutting machine is used for ordinary steel pipe galvanized pipe, plastic-lined pipe, spiral pipe and seamless steel pipe cutting. Widely used in pipeline construction related to fire protection, construction, water supply mines, coal mines, etc..
- Diameter of steel pipe that can be cut:40-280mm, The wall thickness of the steel pipe that can be cut:3-6mm, Jack load:5T, Power:750W, Voltage:220V.
- Automatic return design: Rotate 90° clockwise to tighten the hydraulic oil valve, then press the handle down, turn 90° counterclockwise to loosen the hydraulic oil valve, and the cutting blade returns to its original position.
- Triangle bracket: stable bracket with roller design, adjustable roller distance, suitable for different pipe diameters, adjustable bracket height, easy to lay the tube flat and cut the tube without deviation.
- Comes with five roller, which is suitable for cutting pipes of different sizes..
Check Stock3 Inch Car Turbo Air Intake Hose, Universal Adjustable Flexible High Flow Turbo Cold Air Intake System Hose Pipe Tube
- Durable in Use: This car turbo air intake hose made of high quality plastic material, has high hardness, no harmful coationg on its surface, safe and durable to use..
- Flexible Design: This air intake pipe inlet hose can extendable to 100cm(39.4inch), 360 degree fully flexible..
- Universal Application: This flexible cold air intake turbo hose universal fits for most vehicles with 76mm air intake hose..
- Easy To Use : Easy installation without extra adjustment..
- Low Noise : It has bigger horsepower and less noise..
Check StockInnovative Tip Down (Orange - Your Next All-in-One Ice Fishing Set Up (2-Pack)
- ...ts: The storage tube, which holds the rod and base. The rod, which is 20" long. It’s stiff, but still bends for superior hooking. The base, which supports the Tip-Down, harnesses the rod, and screws into the storage tube..
- THE STORAGE TUBE IS HARD PLASTIC. It has an extendable rod holder that can be set as high as 36" or as low as 24". The extendable holder has a lanyard for easily pulling the holder out of the tube and for easy handling when moving the set-up. It slides up and down easily but will never slip. The pivot pin of the rod sits in the holder’s upper notches..
- THE ROD IS 20" and has line guides including a special line guide just above the reel to prevent spool tangles. The reel has a folding handle for easily reeling in your line and lure. Each reel can handle over 100 feet of line. When a fish strikes, the rod goes down and stays down as long as the fish is on. If the fish lets go, the rod will come back up. If the rod tips down to it's maximum position, the fish can freely take line out..
- THE BASE FEATURES FOUR ROTATING LEGS that support the tip-down on the ice. Folding the legs in....
Check StockMAXKOSKO Water Pipe Heat Tape for Pipe Freeze Protection, Self-Regulating Heating Cable for Metal And Plastic Home Pipes, Energy-Saving Water Pipe Heat Cable Keeps Water Flowing at -40°F, 6Ft. 120V
- PIPE FREEZE PROTECTION: Pipe Heating Cable ,5 W/ft, heats up rapidly.This heating cable can keep water flowing at ambient temperatures down to -40°F (-40°C). It consists of a 3 Ft power cord Plus a heating cable varies from 3 Ft to 160Ft long..
- HIGH TECH SELF-REGULATING HEATING TECHNOLOGY: The pipe heating cable smartly adjust its power output and never overheat or Burn. Water pipe heat tape can be installed with Straight-traced, Spiraled, or Overlapped..
- ENERGY SAVING: Easy heat heating cable has a built-in thermostat that automatically turns on at 38°F, heat trace cable heats only when necessary..
- EASY INSTALLATION: This water pipe heat cable is pre-assembled and ready to Install. You can easily DIY this heat tape for pipes by yourself by following the 5-steps instruction.(If you want to test before installation, please test at a temperature under 0°C (32°F))..
- FOR BOTH PLASTIC AND METAL PIPES: The heat tape for water pipes protects commercial and residential plastic or metal water supply pipes from freezing in cold winter (Including RV, inlet pipe, drain pipe, sewer, palm tree frost protection, etc). And this pipe heating tape can freeze-protect pipes of up to 2in diameter..
Check StockMAXKOSKO Pipe Heat Cable for Pipe Freeze Protection, Self-Regulating Heat Trace Cable for Metal And Plastic Home Pipes, Energy-Saving Water Pipe Heat Cable Keeps Water Flowing at -40°F, 30Ft. 120V
- PIPE FREEZE PROTECTION: Pipe Heating Cable ,5 W/ft, heats up rapidly.This heating cable can keep water flowing at ambient temperatures down to -40°F (-40°C). It consists of a 3 Ft power cord Plus a heating cable varies from 3 Ft to 160Ft long..
- HIGH TECH SELF-REGULATING HEATING TECHNOLOGY: The pipe heating cable smartly adjust its power output and never overheat or Burn. Water pipe heat tape can be installed with Straight-traced, Spiraled, or Overlapped..
- ENERGY SAVING: Easy heat heating cable has a built-in thermostat that automatically turns on at 38°F, heat trace cable heats only when necessary..
- EASY INSTALLATION: This water pipe heat cable is pre-assembled and ready to Install. You can easily DIY this heat tape for pipes by yourself by following the 5-steps instruction.(If you want to test before installation, please test at a temperature under 0°C (32°F))..
- FOR BOTH PLASTIC AND METAL PIPES: The heat tape for water pipes protects commercial and residential plastic or metal water supply pipes from freezing in cold winter (Including RV, inlet pipe, drain pipe, sewer, palm tree frost protection, etc). And this pipe heating tape can freeze-protect pipes of up to 2in diameter..
Check StockPrestantious Low Profile Catch Basin Drain Kit, 12"×12" Catch Basin Downspout Extension Kit with 16.4ft Flexible Pipe, Pipe Stretched Length 16.4ft, Rainwater Drainage System
- Low Profile Design. This catch basin can be installed without deep digging. You no need to connect to the downspout. Perfect for underground using. Able to route the water in another direction so the water won’t flood the open patio..
- 16.4ft L of 2.36in Flexible Pipe. The flexible pipe is made of high quality material and built-in with steel wire. Make it has a long service life under ground. Drains rainwater via this pipe. Reduce damage to foundations from rainwater..
- Easy Installation and No Leaking. No adapters needed for pipe connections. Just expand the pipe and screw it in the connector..
- Extendable Flexible Pipe from 4.6ft to 16.4ft. External diameter is 2.36in. You can change its shape and length according to your needs..
- Collect stormwater runoff and standing water direct to drain pipes. Manage moderate flows of water which is ideal for lawns, landscaped areas, patios and walkways..
Check StockAMZCNC Pipe Tube Bender 3/8″ to 1″, Manual Tube Bender with 7 Dies, Heavy Duty Tube Bender Tubing of Steel Metal Copper Ideal for Repair Shops
- Installed on a solid workbench, the operation is simple and labor-saving. Equipped with 7 sets of 180° elbow dies The pipe bending effect is good, and the pipe is not easy to deform. Wide range of applications: various grades of U-bends, reverse bends, goosenecks and connecting bends The mold is made of ductile iron, with stable performance and durability..
- Durable Material: The pipe bender is made of 40CR steel and 45# steel with rigorous craftsmanship. This product is in possess of great comprehensive performance, strength, and corrosion resistance . Great Capacity: The long handle bends pipe with its wall thickness stock up to 2.0mm.
- Its Pipe Diameter Range :3/8“-1“(10mm-25)..
- 7 Round Dies Size: 7 dies inside this bender that can be utilized for customizing brackets and supporting other parts on the working field. 3/8“,1/2”,9/16“,5/8”,3/4“,7/8”,1“. Wall Thickness of Pipe :0.03”-0.078”..
- Ergonomic Handle: The long handle with rubber covered allows better leverage and operation, the extendable lever will increase the pressure you apply to the metal..
- Compact & Portable: Compact design allows versatility, can make a variety of bends on square or solid round stock, light weight enough..
Check StockEFIELD 3/8\ - 1\ Pex Pipe and Plastic Pipe Cutter
- EFIELD Pipe and Plastic cutter has a unique shaped blade which gives piping a Clean Cut, No Burrs.
- EFIELD Pipe and Plastic cutter Cuts any Size up to 1-Inch (This includes sizes from 1/8"-1").
- EFIELD Pipe and Plastic cutter has Easy locking handle to safely store Pex Pipe Cutter.
- EFIELD Pipe and Plastic cutter SHOULD NOT be used to cut: Metal Pipes, Cable Wires, and PVC Tubing.
- EFIELD Pipe and Plastic Cutter Works with Pex-Tubing and Nylon-Tubing..
Check StockPipe Gripping Pliers-Replaceable Plastic Jaws
- Pipe Gripping Pliers-Replaceable Plastic Jaws.
Check StockDouglas Pliers P-813P 10 inch Tongue & Groove \Pump Pliers\ Angle Nose Slip Lock Joint Plier
- Pipe Gripping Pliers-Replaceable Plastic Jaws.
Check StockBrass Compression Tube Pipe Fitting Connector, Straight Coupling Adapter,1/4\ Tube OD x 1/4\ NPT Male Connector 5pcs (1/4\ OD Compression x 1/4\ NPT Male)
- Tube OD Compression to NPT tube adapter for converting Standard National Pipe Thread (NPT) pipe to Aluminum, Plastic, and Copper straight compression thread pipe Tubing..
- Heavy-duty brass construction with rust proof, corrosion resistance, high temperature ductility and low magnetic permeability.
Check StockBirmingfive 2.4-Inch Air Duct, 3.2-Feet Flexible Aluminum Ducting Foil Car Heater Duct Vent Warm Air Outlet For Webasto(Black)
- APPLICATION: Hot and cold, air duct suitable for Diesel heater for Webasto, for Domestic, for Planer, etc,suitable for any 60mm outlet hose..
- FOR WEBASTO DOMETIC: Warm Heater Duct Pipe Air Ducting Hose For Webasto Dometic, Retractable Car Air Ducting Hose Vent, Hot & Cold Air Ducting Ventilation Air Hose, Heater Duct Pipe, Vent Warm Air Outlet Aluminum Foil Replacement Hose Extendable Pipe..
- HIGH QUALITY: Made of aluminum foil material, durable and practical to use. Anti-impact, corrosion and flame retardant..
- PACKAGE & SIZE: 1pc x Air Ducting Hose, Diameter: About 60mm..
- FLEXIBLE AND EASY TO USE: 2.4 Inch Duct is super flexible and easy to install, it will slide right on your Duct Fan, Vent Exhaust, Carbon Filter or Light Reflector.This Ventilation Duct is 2.4 Inches in diameter and comes in one 3.2 Feet Long Piece, which can be cut into as many pieces as you need using a wire cutter and a paper knife..
Check Stock