Categories

Best Externahard Drive For Raspberry Pi 4

KEYESTUDIO L298P Motor Driver HAT Shield GPIO for Raspberry Pi Model B/B+/A+/2/3/4 Zero and Zero W, High-Power Motor Speed Control Board Dual H Bridge with IR Receiver

  • This Motor Driver HAT gives your Raspberry Pi the ability to drive two DC motors, with drive current up to 2A..
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards like Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+/4B and later versions.
  • Reserved I2C SPI control pins, allows to work with other control boards and sensors. Comes with an IR receiver for communication with an infrared remote controller..
  • Included 4x M2.5*20MM screws, 4 xM2.5*10MM copper pillars, 4x M2.5 Nuts. Easy to install on your RPi board. Please note Raspberry Pi board, remote control and motors in the photos are Not Included!.
Check Stock

Geekworm X820 V3.0 2.5“ SATA HDD/SSD Storage Expansion Board, USB 3.0 Mobile Hard Disk Module for Raspberry Pi 3 B+/3B/ROCK64/Tinker Board&2.5 Inch SATA HDD/SSD

  • ✔ Please use this high quality certified DC 5V 4A power supply(ASIN :B07413Q5Y4).Power supply request: 5Vdc +/-5% , 4A.
  • The power adapter not only powers Raspberry Pi board but also powers your SSD or HDD. If the power is low, the SSD/HDD may not be identified or damage your RPi or X820 board. [Do Not Use ASIN:B01K0608A0!!!].
  • ✔ Raspberry Pi SATA X820 V3.0 HDD/SSD USB3.0 shield expansion board provides an complete storage solution for Raspberry Pi motherboard/ROCK64, Support up to 4TB 2.5 inch SATA interface hard disk drives (HDD) / solid-state drive (SSD). A good raspberry pi sata adapter for Raspberry Pi 3B+, 3B, 2B, B+, ROCK64. Note: For Raspberry Pi 4 Model B 2.5 inch SATA HDD/SSD storage board, please refer to ASIN:B07VXF2HJG.
  • For Raspberry Pi 4 Model B mSATA SSD storage board, please refer to ASIN: B07VXFGFLX.
  • ✔ X820 V3.0 supports USB booting from your HDD/SSD('reboot' command is supported), a useful and reliable function to every raspberry pi users or fans. Suggest to use with geekworm x820 metal case(ASIN :B07GRZRW7J).
  • User manual, pls refer to Geekworm WiKi search(X820)..
  • ✔ Powers the Raspberry Pi via Pi's 40-pin header or Micro USB socket.
  • Furthermore, On-board XH2.54 connector and USB power socket (5V 2A output) to power other devices,....
Check Stock

SmartiPi Touch Pro - Case for The Official Raspberry Pi 7" Touchscreen Display - with Cooling Fan

  • 【Unique Portable monitor for Raspberry Pi】Raspberry Pi hobbyist couldnot miss this unique designed Raspberry monitor! Easily mount your Pi to the back of this 7in touch screen monitor. Four corner holes let you mount the small monitor onto your DIY IoT projects that you’re working on. This Raspberry Pi display also comes with 2 stands, easy to install and remove, great for on-the-go use..
  • 【Plug n Play, Widely Compatible】ROADOM 7 inch USB monitor is 100% plug & play. Signal via HDMI port, power&touch via mivroUSB port, drive free. Compatible with Raspberry Pi 4/3/2/1, Windows 7/8/10 PC, Mac, TV, video game console like NS/XBOX/PS4. Other devices or systems like Retro Pi, NOOBS, Banana Pi, Debian, Ubuntu and Kodi are all supported. *Need an extra HDMI adapter for Pi4..
  • 【Excellent Color with IPS HD Panel】With IPS HD panel, ROADOM 7 inch monitor presents horizontal & vertical 178° full viewing angle and accurate color, displaying more vivid colors and contrast than VA and TN monitors. Touch screen resolution is 1024*600 and it supports up to 1920*1080. Note: Please remove the screen protector before use to present more vivid image..
  • 【Responsive Touching】ROADOM 7 inch touchscreen monitor is equipped with 5-point capacitive touchscreen. Thi....
Check Stock

Longruner for Raspberry Pi Touch Screen 7 Inch 1024X600 LCD TFT Display HDMI Monitor with Protective Case for Raspberry Pi 3 2 1 Model B B+ A BB Black PC

  • ♥ higher resolution 1024*600 ♥ the resolution of this Raspberry Pi touch screen is 1024x600, which was upgraded from 800*480. The picture will be much more delicate and clear..
  • ♥ Support all devices with standard HDMI interface ♥ This 7 Inch touch screen supports most of raspberry Pi, includes Raspberry Pi 1 2 3 model A + B +. It also support most popular Mini PC like BB Black, banana Pi, etc..
  • ♥ Free drive touch function ♥ when the 7 Inch touch screen works with the Raspberry Pi, it supports the Raspbian, Ubuntu, Win10 IoT system, single-touch and free drive. When using as a computer monitor, It supports Windows 10/ 8. 1/ 8/ 7, five point touch and free drive..
  • ♥ protective case Assembled already ♥ the Raspberry Pi Display is assembled with the protective black-acrylic case already, save your time on assembling. The triangular stand can be removed freely, making it easy to use the screen as wall-mount touch screen or desktop monitor..
  • ♥ Make it a Mini laptop ♥ the back of the touch screen can be equipped with a raspberry Pi motherboard. No need to carry Raspberry Pi and screen separately. More convenience. It'll be a Mini laptop to you! Power button is on the back of the screen to save your energy..
Check Stock

Geekworm KVM-A3 Kit with Raspberry Pi 4 Case Compatible with PiKVM ATX HDMI CSI for Raspberry Pi 4 Model B Only(Not Include Raspberry Pi)

  • 【What is it】This kit allows user to realize a PiKVM / KVM project with raspberry pi 4 which can control a computer using a web browser!.
  • 【Compatiblity】for use with Raspberry Pi 4 Model B 8GB / 4GB / 2GB / 1GB only, the metal case only support Raspberry Pi 4..
  • 【Function】Remotely turn on/ turn off / restart your computer.
  • reinstall the OS using the Virtual CD-ROM or Flash Drive.
  • Simulate a keyboard, mouse, and a monitor and presented in a web browser, etc..
  • 【How to Power】Power Input: 5.1Vdc +/-5% , ≥3A.
  • Power Via USB Type-C port of X630-A3. (DON'T power via Raspberry Pi's TYPE-C port, because it is occupied as USB OTG.) Recommend to use Geekworm UL listed 20W 5V 4A USB Type-C power adapter (ASIN:B09J856PND)..
  • 【Cooling Solution】X630-A3 with a on-board 3007 cooling fan for heat dissaption of Pi4.
  • 【What Included】1 x KWM-A3 Metal Case with Accessories, 1 x X630-A3 V1.2 Expansion Board with Accessories, 1 x X630-A5 V1.0 Adapter Board with Accessories, 1 x X630 HDMI to CSI-2 Module with Accessories, 1 x Ethernet Cable(1m length), 1 x0.96 inch OLED Module.
  • 【Extra Needed】Raspberry Pi 4, TF Card, HDMI Cable, Power Adapter.
Check Stock

Treedix 3.5inch TFT Touch Screen Module 50Hz 320x480 Resolution LCD Display with Touch Pen ABS Case and Cooling Fan Compatible with Raspberry 4B Pi4

  • The case can be used as raspberry pi case with mini cooling fan and 3.5 inch screen installed. Please note that the ABS case is specially designed for Raspberry Pi 4 Model B only..
  • The 3.5 inch touch screen has 480 x 320 resolution, with resistive touch control.It supports up to 125MHz SPI signal input.
  • support FBCP software drive, support double screen display, can adjust the resolution of the software to zoom..
  • Same size as the Raspberry Pi, perfectly compatible and can be directly inserted into any version of the Raspberry Pi (Raspberry Pi ZeroW, A, A+, B, B+, 2B, 3B, 3B+,4B).
  • This product has passed CE and RoHS certification and support Raspbian/Ubuntu/Kali system, provide driver and image. It can display stable without flicker.
  • The case use split design make it easy to install, protecting your pi computer and screen, and cooling fan with aluminium bracket installed and thermal silicon pad for cooling the chip to keep your pi computer and screen cool always..
Check Stock

Seeed Studio ReSpeaker 4-Mic Array for Raspberry Pi, Raspberry Pi Microphone

  • ReSpeaker 4-Mic Array for Raspberry Pi（Pi 3/Pi 4 B +) is a 4 microphone expansion board for Raspberry Pi designed for AI and voice applications. This means that you can build a more powerful and flexible voice product that integrates Amazon Alexa Voice Service, Google Assistant, and so on..
  • Different from ReSpeaker 2-Mics Pi HAT, this board is developed based on AC108, a highly integrated quad-channel ADC with I2S/TDM output transition for high definition voice capture..
  • Besides, this 4-Mics version provides a super cool LED ring, which contains 12 APA102 programmable LEDs.With that 4 microphones and the LED ring, Raspberry Pi would have ability to do VAD(Voice Activity Detection), estimate DOA(Direction of Arrival) and show the direction via LED ring, just like Amazon Echo or Google Home..
  • This Raspberry Pi microphone support all Raspberry Pi models, including Raspberry Pi Zero, Raspberry Pi 1 B+, Pi 2 B, Pi 3 B, Pi 3 B+，Pi 4 B..
  • ReSpeaker 4-Mic array does not have audio output. If this is a requirement please consider the ReSpeaker 6-Mic Circular Array Kit For Raspberry Pi, the ReSpeaker 4-Mic Linear Array Kit for Raspberry Pi , or the ReSpeaker Mic Array v2.0..
Check Stock

ROADOM Raspberry Pi Touchscreen Monitor,Upgraded 7'' IPS 1024X600 Dual-Speaker,USB HDMI Portable Monitor Capacitive Pi Display,Compatible with Raspberry Pi 3b+/Raspberry Pi 4b, Windows,Drive-Free

  • 【Unique Portable monitor for Raspberry Pi】Raspberry Pi hobbyist couldnot miss this unique designed Raspberry monitor! Easily mount your Pi to the back of this 7in touch screen monitor. Four corner holes let you mount the small monitor onto your DIY IoT projects that you’re working on. This Raspberry Pi display also comes with 2 stands, easy to install and remove, great for on-the-go use..
  • 【Plug n Play, Widely Compatible】ROADOM 7 inch USB monitor is 100% plug & play. Signal via HDMI port, power&touch via mivroUSB port, drive free. Compatible with Raspberry Pi 4/3/2/1, Windows 7/8/10 PC, Mac, TV, video game console like NS/XBOX/PS4. Other devices or systems like Retro Pi, NOOBS, Banana Pi, Debian, Ubuntu and Kodi are all supported. *Need an extra HDMI adapter for Pi4..
  • 【Excellent Color with IPS HD Panel】With IPS HD panel, ROADOM 7 inch monitor presents horizontal & vertical 178° full viewing angle and accurate color, displaying more vivid colors and contrast than VA and TN monitors. Touch screen resolution is 1024*600 and it supports up to 1920*1080. Note: Please remove the screen protector before use to present more vivid image..
  • 【Responsive Touching】ROADOM 7 inch touchscreen monitor is equipped with 5-point capacitive touchscreen. Thi....
Check Stock

Miuzei Raspberry Pi 4 Case with Fan Cooling Pi 4 Case with 4 Pcs Aluminum Heat Sinks Pi 4B Case for Raspberry Pi 4 Model B -Black/Blue (Pi 4 Board Not Included)

  • Raspberry Pi 4 Case for Raspberry Pi 4 - Miuzei clear blue acrylic raspberry pi 4b case is specially designed for raspberry pi 4 modle b / 4 b, and perfect compatible with raspberry pi 4 /4b. assembly easy for beginners and amateur..
  • Raspberry Pi 4 Case With Fan - New Raspberry pi 4b case with a Silence DC 5V cooling fan and 4 pcs Aluminum heatsinks, cooling system keep your Raspberry pi 4 B cool quickly even the CPU under high load..
  • Raspberry Pi 4 Model B Case - acrylic pi 4 case won’t block the signal.the rubber feet on the bottom lid can provide a stable platform for raspberry pi 4 case so that it allows air to circulate on the bottom side of the board and avoid the screws scratching the desk surface..
  • Easy To Access All Ports - Miuzei raspberry pi 4 case fan can perfect Access to the USB-C Power Connector, Dual Micro HDMI, Audio/Video, USB and Ethernet Ports, GPIO Port, Camera Cable, and Access to the Micro SD Card..
  • Packaging Content & After -Sales - you will receive pi 4 clear blue case, 4 piecess raspberry pi heatsink, 35mm cool fan, 4 piecess rubber feet, screwdrive, awesome looking, it can make your pi looks cooler than others. if you encounter any problems, you can contact us at any time, and we will answer you..
Check Stock

Eyoyo Portable Monitor for Laptop, 10.5 Inch Small Monitor 1920x1280 USB C Computer Display Travel Monitor with HDMI, External Monitor for PC Phone Xbox Switch PS4, 178° IPS Screen, Plug and Play

  • 【Unique Portable monitor for Raspberry Pi】Raspberry Pi hobbyist couldnot miss this unique designed Raspberry monitor! Easily mount your Pi to the back of this 7in touch screen monitor. Four corner holes let you mount the small monitor onto your DIY IoT projects that you’re working on. This Raspberry Pi display also comes with 2 stands, easy to install and remove, great for on-the-go use..
  • 【Plug n Play, Widely Compatible】ROADOM 7 inch USB monitor is 100% plug & play. Signal via HDMI port, power&touch via mivroUSB port, drive free. Compatible with Raspberry Pi 4/3/2/1, Windows 7/8/10 PC, Mac, TV, video game console like NS/XBOX/PS4. Other devices or systems like Retro Pi, NOOBS, Banana Pi, Debian, Ubuntu and Kodi are all supported. *Need an extra HDMI adapter for Pi4..
  • 【Excellent Color with IPS HD Panel】With IPS HD panel, ROADOM 7 inch monitor presents horizontal & vertical 178° full viewing angle and accurate color, displaying more vivid colors and contrast than VA and TN monitors. Touch screen resolution is 1024*600 and it supports up to 1920*1080. Note: Please remove the screen protector before use to present more vivid image..
  • 【Responsive Touching】ROADOM 7 inch touchscreen monitor is equipped with 5-point capacitive touchscreen. Thi....
Check Stock

Geekworm Raspberry Pi 4 Case, Raspberry Pi 4 Heatsink Aluminum Alloy Passive Cooling Case (P330)

  • 【Passive Cooling Aluminum Alloy Case】Geekworm Raspberry Pi 4 Case - P330 is designed for Raspberry Pi 4 Model B computer only, support Raspberry Pi 4B 1GB/2GB/4GB/8GB version.
  • Cool your Raspberry Pi 4 without fans and noise..
  • 【Add Copper Heatsink for Better Cooling】Equipped with a CPU copper heatsink(to replace the thermal pad) to attach with CPU grease on CPU of Pi4 for better heat dissaption (Not include CPU grease).
  • 【High Quality Aluminum Material】Sturdy and durable, keep your Raspberry Pi 4 free from scratches, dust and damage..
  • 【Easy Access to Raspberry Pi 4 Ports】Easy installation. Easy access to all Raspberry Pi 4 ports, such as GPIO, Micro HDMI, TF Card, USB-C Power Supply ".
  • 【Packing List】1 x Raspberry Pi 4 Aluminum Alloy Case, 1 x Copper Heatsink, 1 x Screws Pack 【Note】NOT include raspberry pi board.
Check Stock

Vilros Raspberry Pi 4 Compatible Use and Store Accessory Set (Black)

  • INCLUDES: Use and Store Case (Black)--Vilros Raspberry Pi 4 Compatible Power Supply--Vilros 1.8M HDMI-MIcro HDMI Cable--Vilros Heatsink for Pi 4 (Set of 4)--Vilros Raspberry Pi 4 Quick Start Ebook Download Code--Screwdriver and Screws--DOES NOT INCLUDE A RASPBERRY PI MOTHERBOARD.
  • USE AND STORE: Designed for the Raspberry Pi 4 the Use and store case makes it easy to use your pi as well as store all your accessories when not in use--the case also features a preinstalled fan that is easily connected to the Pi.
  • POWER SUPPLY :The Vilros USB-C 5.1V 3A Power Supply was Designed for the Raspberry Pi 4 and Features a 5FT cable with an Inline ON/OFF Switch to make it easy to turn the Pi on and off.
  • HDMI-MICRO HDMI CABLE: The Vilros 1.8M HDMI/Micro HDMI Cable will connect your Raspberry Pi 4 Board to any HDMI monitor.
  • EASY TO SET UP: Includes a EBOOK download code for the Vilros Raspberry Pi Quickstart Guide 2nd Edition (Updated for Pi 4) --also includes a screwdriver, screws and clear instructions for assembly..
Check Stock

for Raspberry Pi 7 Inch Capacitive Touch Screen Kuman LCD HDMI Input 1024x600 Display with Case Stand

  • Capacitive touch control This Raspberry Pi screen resolution is 1024x600 It also has vertical and Horizontal image flip function Image 4 3/ 16 9....
  • Operating voltage The Touch Screen 5V 1a power supply current requirements within the above 2a on board 400mA DC-DC Boost Regulator to provide power....
  • Multifunctional when the 7 inch Touch Screen work with the Raspberry Pi it supports the Raspbian Ubuntu Win10 IoT single-touch and free drive When....
  • With protective case The Raspberry Pi Display comes with the protective case stand which is made with black acrylic Raspberry Pi board can be....
  • Good customer service If you need any technique support Please let us know we will be surely responsible to all problem Or You could refer the QA.
Check Stock