Categories

Best External Motor

Omega 18206C Black Hydraulic Bottle Jack with Return Springs - 20 Ton Capacity

  • A compact yet powerful air turbo motor US patent number: 5,341,723 is equipped to raise the load to the desired height efficiently, effortlessly, and safely.
  • Versatile quick connector design provides for easy removal of air hose from air motor allowing compact storage or remote operation.
  • Chrome plated ram for longer seal life and optimum performance.
  • US patent number: 5,946,912, a built-in bypass device protects hydraulic system from over pumping damage.
Check Stock

AOICRIE 4PCS L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper for Arduino

  • L298N as Main driver chip L298N, strong driving ability, strong anti-interference, low calorific value, afterflow diode protection, more stable and reliable for Arduino projects, Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability..
  • Double H bridge design, can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors, high efficient, To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage..
  • Driving DC motor Because the module is drived by double H bridge,it can drive two motors simultaneously.Input the following driving timing from IN1-IN4 then the speed and direction of the stepper motor can be controlled..
  • Easy to Use No assembly required. This L298N board comes ready to go. Just wire up motors and power, easy to use..
  • Wide Usage Great for DIY Smart Car Robot Power MEGA R3 for Mega2560 Duemilanove, if driving voltage is more than 12V, use external standard 5volt TTL outputs to switch the H-bridge circuits..
Check Stock

LeTkingok Desktop Injection Pump Syringe Propeller Laboratory Micro Pump Glue Dispenser 1ml~150ml 110V-220V (Single Channel Set)

  • 8mm diameter stainless steel round guide rail, extended flanged bearing, screw rod with T8 lead 1mm screw, copper screw nut.
  • The clamping is fixed by a clamp, and the M4 hand-tightening nut is fastened.
  • The motor is a 42-step motor with a large torque motor and a single-turn setting of 400 steps.
  • The controller uses 1602 liquid crystal display, 4 buttons can set speed, working time, working mode, and the other 4 buttons are used to control the machine, respectively, fixed speed and high speed.
  • The TTL level RS-232 interface is reserved on the board, and the control button also has an external interface, which can be used for connecting an external switch, a foot switch, etc..
Check Stock

MACH3 Controller USB MACH3 100Khz Motion Controller Card Breakout Board Controller Card for CNC Engraving Servo Motor Stepper Motor Servo motor

  • 【Functions】The function of this motion control card includes that it supports automatic probe tool, emergency input, limit switch, and supports....
  • 【4-axis Linkage】Usb interface board supports for 4-axis linkage, you can connect four stepper motor drives or servo drives. 4 general-purpose....
  • 【Wide Use】The maximum step-pulse frequency of motion control card is100KHz, which is very suitable for CNC Engraving, Servo Motor, Stepper Motor....
  • 【Advantage】The motion controller needs using external 24V DC power to isolate USB and external port, and to make the system more stable. And it....
  • 【Drive Output Interface】The 4 general-purpose isolated relay drive output interface can drive four relays for controlling the spindle starts,....
Check Stock

LG 4417EA1002K Genuine OEM Motor Stator Assembly for LG Washing Machines

  • This LG Motor Stator Assembly is a genuine OEM (Original Equipment Manufacturer) part manufactured to exact specifications.
  • Replacement LG brand Washing Machine Motor Stator Assembly works with the motor rotor to rotate the spin basket.
  • LG 4417EA1002K Washing Machine Motor Stator Assembly has external diameter of 11".
  • High quality LG OEM 4417EA1002K Washing Machine Motor Stator Assembly is manufactured with premium materials for durability and exact fit, be sure to....
  • Life's Good when choosing Genuine LG OEM Factory parts for your LG appliances.
Check Stock

Eastern Performance Retaining Ring Case Bushing/Race for Pinion Shaft A-24701-54

  • For the motor mechanic and a variety of engineering uses.
  • Handy Assortment of Internal & External Circlip Rings.
Check Stock

Huanyang Vector VFD Variable Frequency Drive ,Single to 3 Phase,7.5kW 10HP 220V AC 34A for Motor Speed Control ,GT Series

  • 【Connection way】Input：220VAC(+/-5%) 1 or 3phase（for single-phase input, just connect the input wire to the R and S terminals） .Output：3phase 220v. Frequency：0-50hz/60hz. 0-400hz.
  • 【Features】With better performance and stability.Adopt DSP vector control to enable motor to achieve high torque in LOW SPEED rotation to increase motor working efficiency.support fast accelerate/deccelerate with external optional braking resistor and external potentiometer,and.
  • 【Safety performance】Take advantage of various protection ways such as Motor short-circuit detection at power-on, output phase loss protection, over-current protection, over-voltage protection, under-voltage protection, overheat protection, overload protection and etc..
  • 【Good Noise Control】The product has the advantages of low noise and low electromagnetic interference, which are achieved by the excellent PMW control technology and component compatibility design. There is enough space for cooling between each component, and the product casing is designed with multiple holes, the above features can make this VFD have a longer service life..
  • 【Warranty】: 1 Year replace .If there is an error in the product and you do not know how to operate, please contact the seller.
Check Stock

Sheep Clippers Sheep Shears Professional Animal Shearing Machine Farm Livestock Shearing Machine Grooming Kit Animal Hair Cutting with Grooming Carrying Case

  • 【High Performance】The electric sheep shears has a 1000W powerful external motor, the speed can up to 2800r/min and meet different kinds of needs..
  • 【Premium Blades】Equipped with a 9-tooth blade and a 13-tooth blade for easy and quick shearing, sharp and wear-resistant. The tightness of the....
  • 【Reasonable Design】External motor, good heat dissipation, easy to maintain. User-friendly design for comfortable gripping..
  • 【Simple Operation】This wool shearing machine is easy to use with one-button power switch, equipped with a 2m long cable, convenient for....
  • 【Widely Use】Our electric sheep clipper can be used for shearing various animal's fur, such as sheep, goats, alpacas, cattle and horses and so on..
Check Stock

RAMPS 1.4 Controller + MEGA2560 R3 Board + 5pcs Soldered A4988 Stepper Motor Drivers + 5pcs Heat Sinks + 19pcs Jumpers with USB Cable for RepRap 3D Printer Kit

  • SAVING SPACE: The RAMPS 1.4 board is designed to fit the entire electronics needed for a RepRap in one small package. So it can save space and cost..
  • SCALABLE: RAMPS interfaces an Mega with the powerful MEGA platform and has plenty room for expansion. A number of expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack..
  • EASY TO USE: Using the bootloader, you can download the program directly via USB without using other external writers. Development IDE interface is based on open-source principles, allows you to free download for use in project work, school teaching, motor control, interactive works..
  • MODULAR DESIGN: The modular design includes plug in stepper drivers and extruder control electronics on an MEGA shield for easy service, part replacement, upgrade-ability and expansion..
  • POWER SUPPLY AND DRIVER: Supply part of the optional USB power, or as an external power using the AC-to-DC adapter and battery. This stepper motor driver lets you control one bipolar stepper motor at up to 2 A output current per coil..
Check Stock

3450RPM 5HP Air Compressor Motor P56 Frame Single Phase Motor for 208-230 Volts Electric Air Compressor Motor

  • ❤【Great Function】--High working efficiency. The maximum speed at which the compressor motor 56 can run is 3450RPM, which greatly improves the efficiency of the work and saves your working time..
  • ❤【Long service life】--The air compressor motor is designed with multiple heat dissipation holes with good heat dissipation performance, which can quickly dissipate heat, prevent the machine from being damaged by overheating, and prolong the service life of the motor.
  • ❤【Premium Quality】--The housing and mounting bracket are made of high quality steel, which can well protect the motor from the external environment, ensure the stability and durability of the motor, and prevent the bracket from being unstable and dropping the motor..
  • ❤【Buy Confidence】-- For any reason you're not completely satisfied. Please feel free to contact us, we will solve the problem for you at the first time. Buy it with confidence!.
Check Stock

[4-Pack] MG996R 55g Metal Gear Torque Digital Servo Motor for Futaba JR RC Helicopter Car Boat Robot

  • This MG996R Servo motor which updated from SG90 and MG90S micro servo motor. (the Speed, Tension and Accuracy all increase).
  • The MG996R model compliant with most standard receiver connector,for Futaba, Hitec, Sanwa, GWS etc..
  • Power Supply: Through External Adapter. Stable and Shock Proof. Coreless Motor , Metal Gear ..
  • Torque at 6V 12kg/cm, 7.2V 13kg/cm.(Recommended voltage: 5V, current usage: 3A ). Positioning speed at 4.8V without load 0.17s / 60 degrees.
  • Universally Applicable: Micro Servo Motor for 1:10 RC car robot helicopter servo remote controlled aircraft and suitable for most DIY projects..
Check Stock

[2-Pack] MG996R 55g Metal Gear Torque Digital Servo Motor for Futaba JR RC Helicopter Car Boat Robot

  • The MG996R model compliant with most standard receiver connector,for Futaba, Hitec, Sanwa, GWS etc..
  • This MG996R Servo motor which updated from SG90 and MG90S micro servo motor. (the Speed, Tension and Accuracy all increase).
  • Power Supply: Through External Adapter. Stable and Shock Proof. Coreless Motor , Metal Gear ..
  • Torque at 6V 12kg/cm, 7.2V 13kg/cm.(Recommended voltage: 5V, current usage: 3A ). Positioning speed at 4.8V without load 0.17s / 60 degrees.
  • Universally Applicable: Micro Servo Motor for 1:10 RC car robot helicopter servo remote controlled aircraft and suitable for most DIY projects..
Check Stock

ACEIRMC 8pcs L298N Motor Driver Controller Board DC Dual H-Bridge Robot Stepper Motor Control and Drives Module for Arduino Smart Car Power MEGA R3 Mega2560

  • When you are driving voltage (above logo for the 12 v input, can actually accept input range is 7 to 12 v) for 7 v to 12 v, can make to onboard power supply 5 v logic, when using the onboard after 5 v power supply, interface of + 5 v The power supply does not input voltage, but can yield 5V voltage for external use..
  • The chip manual proposes to support 35V, but according to the book When the maximum voltage is applied to the maximum voltage of 298 conservative applications to 24V, for example, the motor with a rated voltage of 18V shall be driven.
  • Great for for Arduino DIY Smart Car Robot Power MEGA R3 Mega2560 Duemilanove, if driving voltage is more than 12V, use external standard 5volt TTL outputs to switch the H-bridge circuits.
  • No assembly required. This L298N board comes ready to go. Just wire up motors and power, easy to use.
  • Double H bridge design, can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors, high efficient.
Check Stock