Categories

Best Extra Long Drill Bits For Deep Holes

5Pcs 150mm-160mm Extra Long Twist Drill Bit High Speed Steel Straight Shank Tool Sets 2-5 mm for Wood Plastic and Aluminum

  • 【extral long length】Bits are 150mm~160mm(about 5.9~6.3 inchlong, provides better stability and balance during quick operation to ensure position is intact..
  • 【long cutting edge】The extra long cutting edge(88-100mm) allows you using these bits to drill deep holesshape tips can make the drilling easier and more effortless..
  • 【5 sizes】This extra long twist drill bits set has 5pcs in 2mm, 3mm, 3.5mm, 4mm, 5mmOD..
  • 【high-speed steel】These long drill bits are made of high-speed steel for high hardness and durability,more abrasion resistant and durable than other metal materials..
  • 【application】HSS General Length Twist Drill Bits are widely used for drilling, such as metal, wood, etc..
Check Stock

Makita 2 Pack - SDS-Plus 3/4” Drill Bits For SDS+ Rotary Hammers - 10' Deep Drilling Into Concrete & Masonry

  • ✅ MAKITA’S 2 Pack 3/4” SDS+ Drill Bits for SDS+ Rotary Hammer Drills has 2 Premium, Long-Lasting, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening up to 10" into Masonry, Reinforced Concrete, Tile, Brick & Cinder Block.
  • ✅ Two 3/4" Ultra-Duty Makita SDS-Plus Drill Bits for Up to 10" Deep Drilling Depths.
  • ✅ EASILY & SMOOTHLY DRILL 4-5X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling.
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single-Piece Steel Bits are heat forged for strength and longevity with a sharp Carbide Tip edge design for maximum impact on masonry/concrete material, allowing for EFFECTIVE and PRECISE drilling.
  • ✅ IDEAL for General Contractors and Construction Industry that require ULTRA DUTY SDS+ bits for....
Check Stock

Cleveland 2565 High Speed Steel Long Length Drill Bit, Parabolic Flute, Uncoated (Bright), Round Shank with Tang, 118 Degree Notch Point, 9/32\ (Pack of 5)

  • Parabolic flute design can drill 14 times the diameter of the drill deep.
  • 118-degree angle, notched-point provides ease of penetration when starting holes and prevent walking.
  • High-speed steel (HSS) for use on a wide variety of materials.
  • Uncoated (bright), for use with a wide range of drilling materials.
  • Long-length drill bits, longer than Jobber drill bits, for deeper holes.Made in the USA.
Check Stock

Diamond Tile Drill Bits Ceramic Diamond Glass Drill Bit Set 5 Pack 2 Carbide Drill Bits Ceramic Tile Drill Bits 3 Porcelain Granite Drill Bits and Drill Guide for Diamond Tip Drill Bit for Bottles

  • Tungsten Carbide Drill Bit For Ceramic Tile Bits For Drill Holes In Clay Plant Pots For Drainage 3/16″ And 1/4″ Ceramic Drill Bits For Tile . Tungsten Carbide Drill Bits have Self Centering Point for Drilling Holes in Ceramic Tile Marble Travertine and Slate..
  • Diamond Drill Bits For Glass 3/16 In 1/4″ In 1/2 Inch Drill Bit For Glass Drill Set. glass Drill Bit For Bottles Half Inch Glass Drill Bit With Guide For Drilling Hole In Glass Bottles And Glass Blocks For Tree Lights. Keep These Glass Hole Saw Drill Bit For Drilling Glass Cool With Water For Extended Life..
  • For Best Results Use The Diamond Drill Bit For Porcelain And The Spear Point Ceramic Tile Bit To Drill Tile. Use Diamond Bit To Drill Glass And Carbide Tipped Drill Bits With Any Battery or Electric Drill Hole Cutter Bits Must Be Used Wet. Carbide Ceramic Tile Drill Bit Set Can Be Used Dry If No Heat Builds Up..
  • Whilst The Tungsten Tile Cutting Drill Bits Can Be Used As Porcelain Tile Drill Bit The Diamond Tile Drill Bit Will Drill Holes In Porcelain Tile Faster And Last Longer As Long As Diamond Cutting Tip Is Kept Cool. Remove Diamond Tipped Drill Bit From Tile Hole Every 10 To 15 Seconds And Dip Diamond Porcelain Drill Bit Into Cup Of Water, Also Spray Water Into Ceramic Tile Hole To ....
Check Stock

IRWIN Drill Bit, 3-Cutter, Self Feed, 2-Inch (3046010)

  • Drill bits have 3 cutting edges that are hardened for durability and long life in tough materials.
  • Replaceable screw-point tip pulls the drill bit fast for clean, true holes.
  • 7/16-inch hex quick-change impact shank reduces slipping in standard chucks.
  • IRWIN drill bits are compatible with most 7/16-inch impact drills.
Check Stock

NEIKO 10180A Steel Spiral Quick-Change Step Drill Bit for Metal with 4-Flute Spiral Grooved Design, Nitride-Coated High-Speed Steel Multitool with 12 Sizes in 1 Step Bit, Unibit, Hole Drill Bit

  • HIGH-QUALITY DRILL BIT: Our individual NEIKO 10180A step drill bit is made with #4241 high-speed steel and has a titanium nitride coating for extra durability. The 4-flute spiral grooved design makes this a fast and long-lasting metal cutting tool..
  • QUICK-CHANGE DRILL BIT: With a 1/4-inch quick-change hex shank, this step drill bit fits securely in most pistol drills or drill presses. Use this cone-shaped, versatile, and small drill bit for metal projects at work or home..
  • DRILL BIT FOR HARDENED STEEL: This stepper drill bit for metal is perfect to create the exact hole size you need. The fluted spiral drill-bit design automatically deburrs and expands holes for a cleaner drilling process every time without heating up..
  • MULTISIZE DRILL BIT: This metal step drill bit can drill holes in 12 different sizes to meet any job requirements. Our 12-step drill bit for metal drills holes in 1/16-inch increments ranging from 3/16″ to 7/8″ to create the perfect-sized holes..
  • HEAVY-DUTY DRILL BITS: Our drill bits are created to work with any project, large or small. Our multifunction drill bits are designed with you in mind, so you can get your work done with confidence and speed using our quality tools!.
Check Stock

Dry Diamond Drill Bits 1/4" 6mm Diamond Hole Saw for Ceramic Porcelain Tile Glass Stone Marble Granite,Masonry Drill Bits Vacuum Brazed Diamond Core Drill Bit Kit for Bottles,Pots

  • 【DRILLING NEEDN'T WATER 】:Tile drill bits can be used without water,because tile dry diamond drill bits integrated with wax lubricant inside which melts while dry drilling and cools the cutting surface.
  • But water can be used as additional cooling to prolong the life of tile drill bits.
  • 【Apply to】:The diamond drill bits Great for drilling clean holes to hard materials especially tiles, porcelain ground, granite ceramic glass mirror marble stone masonry brick, Note: not for wood.
  • 【Wide compatibility】Diamond coating enhances the drilling speed.
  • Ceramic tile drill bits is hex shank which is compatible with electric drill,hand drill,bench drill, angle grinder and vacuum brazed diamond technology provide more durable and long life.
  • 【SUSUMU SERVICE】:If you are not satisfied with our porcelain tile drill bits, please contact SUSUMU, will be 100% MONEY BACK GARRANTEE.If you are not satisifed with diamond tipped drill bit, you could return diamond tip drill bit for a full refund without hassle.Buy with confidence and complete peace of mind..
Check Stock

COMOWARE 20V Cordless Drill, Electric Power Drill Set with 1 Batteries & Charger, 3/8” Keyless Chuck, 2 Variable Speed, 266 In-lb Torque, 17+1 Position and 34pcs Drill/Driver Bits

  • 【20 Voltage & 2 Variable Speeds】 Higher voltage means more torque-spinning strength to overcome resistance. This 2 variable-speed ( 0-350 & 0-1300 RPM ) cordless drill with an adjustable clutch gives you the versatility for drilling different materials and using a variety of bits. The low speed is for driving screws, the high speed is for drilling holes..
  • 【25+1 Position Clutch & 266 In-lbs Max Torque】 This cordless drill's clutch provides precise control for drilling, which helps to prevent sinking a screw too deep, stripping out the head of a screw or even breaking a screw shaft. 17-Torque allows for various applications and additional 1-torque for drilling..
  • 【1500mAh Batteries & 60min Fast Charger】20V 1500mAh Lithium-Ion battery packed with higher capacity indicator lets you finish your job smoothly with long lasting performance. 1.5A 1-hour fast charger keeps your drill constantly running..
  • 【3/8” Keyless Metal Chuck & LED Work Light】A 3/8-inch cordless drill accepts a wide range of bits, making it versatile for common tasks around the house. Drill has keyless chuck that you can tighten or loosen by hand. The Forward/Reverse switch allows you to either screw or replace/remove bits for your purposes. LED Light for increased visibility....
Check Stock

COMOWARE 20V Cordless Drill, Electric Power Drill Set with 2 Batteries & Charger, 3/8” Keyless Chuck, 2 Variable Speed, 280 In-lb Torque, 18 Position and 22pcs Drill/Driver Bits

  • 【20 Voltage & 2 Variable Speeds】Higher voltage means more torque-spinning strength to overcome resistance. 2 variable-speed ( 0-350 & 0-1350 RPM) power drill with an adjustable clutch gives you versatility for drilling different materials and using a variety of bits. The low speed is for driving screws, the high speed for drilling holes..
  • 【18+1 Position Clutch & 280 In-lb Max Torque】 The drill's clutch gives a user more control over the amount of torque applied to a screw to prevent sinking a screw too deep, stripping out the head of a screw or even breaking a screw shaft. 18 Torque allows for various tasks and additional 1 torque for drilling..
  • 【2 x 1500mAh Batteries & 60min Fast Charger】20V 1500mAh Lithium-Ion battery packed with higher capacity indicator let you finish your job smoothly with long lasting performance. 1.5A 1-hour fast charger keeps your drill constantly running..
  • 【3/8” Keyless Metal Chuck & LED Work Light】A 3/8-inch cordless drill accepts a wide range of bits, making it versatile for common tasks around the house. Drill has keyless chuck that you can tighten or loosen by hand. The Forward/Reverse switch allows you to either screw or replace/remove bits on your purposes. LED Light for increased visibility in enclosed ....
Check Stock

Fulton 6 inch Long Forstner Bit Extension For Adding Over 5-5/8 inches of Drilling Depth To Your Forstner Bit. For Wood Turners, Furniture, Carpentry and Construction

  • Drilling with forstner bits to achieve a flat bottom hole or to start a deep hole turning project like on a larger vase or vessel is essentially impossible with a standard length forstner bit. To remedy this issue we have developed a heavy duty steel extension that allows you to secure a 3/8 inch shank forstner bit into the end collet..
  • The forstner bit extension gives you additional 5-5/8 inches of reach to bore deeper into your projects. This will help you create larger diameter starter holes or help when you need to drill in just a little further than the standard bit length will allow. The extension can be used with forstner bits on drill presses, lathes with a drill chuck installed (drill chuck not included) or with a power drill..
  • One of the most common uses for the forstner bit extension is for woodturners who need to bore out starter holes on larger vessels. However, the extension works exceptionally well for projects like salt shakers, pepper mills or even wood turned beverage mugs. Contractors use the extension when they need to bore deep holes for running cables or wires and they also use it for joining larger timbers..
  • The forstner bit extender is made from solid, heavy duty machined steel. It is designed to be used with forstner bits only. ....
Check Stock

CORTOOL 1 x 12 Inch Auger Drill Bit for Wood, Soft and Hard Wood Plastic with 7/16 Inch Hex Shank

  • ✅12 Inch x 1 Inch Auger Drill Bit，Long Ship Auger.
  • ✅Creates deep, clean holes quickly and cleanly in hard or soft wood..
  • ✅Lead screw pulls the bit into the work eliminating extra pressure and strain..
  • ✅Use these bits with a hand or electric drill..
  • ✅Comes complete with tube protection and CORTOOL guarantees product quality and customer satisfaction..
Check Stock

Aluminium Nail Drill Bit Holder Storage Box,LXIANGN 25 Holes Nail Drill Grinding Bit Stand Display Case Efile Nail Bits Organizers Container For Nail Art (silver)

  • ....The storage box can hold up to 25 nail drill bits..
  • Easy to Carry---Nail drill grinding bit stand case approx.3 *3*2.3 inch/7.8*7.8*6cm.The compact size of drill bit organizer is convenient for you to put in your backpack, reducing your travel burden.Does not take up your extra space..
  • Easy to Use---Nail bit holder storage allowing you to find the nail art tools you need easily and quickly, Improving the efficiency, to enjoy the better experience of nail art. Good choice for nail salon, beauty salon, spa or personal pedicure, or do your own nails at home..
Check Stock

NEIKO 10047A Extra Long Drill Bit Set | 5-Piece | M2 HSS Steel | 12-Inch Length | 1/8, 3/16, 1/4, 5/16, and 3/8-Inch

  • [LONG REACH]: Extra-long drill bits give you 12 inches of added length to work with and provides more stability during quick operations..
  • [DURABLE]: These drill bits are made from heat-treated M2 high speed steel for excellent hardness, wear resistance, and toughness..
  • [SMOOTH DRILLING]: Combining high hardness and sharp pointed tips, these drill bits easily puncture tough materials for a smooth drilling finish..
  • [VERSATILE]: Long drill bits can be used for drilling into metal, wood, plastic, PVC, and many other materials..
  • [INCLUDES]: This extra-long drill bit set has (5) standard sizes of 12-inch drill bits that includes: 1/8-inch, 3/16-inch, 1/4-inch, 5/16-inch, and 3/8-inch..
Check Stock