Categories

Best Extractant Of Nonferrous Metals

Timber Wolf Bandsaw Blade 111\ x 3/4\

  • All Pro PGT, Precision Ground Tooth band saw blades for the professional user.
  • Unique carbon-rich steel - optimum balance between strength and flexibility.
  • Superior hardened and tempered material -stronger, faster cutting blade performance.
  • Usually fine, equally spaced teeth in narrow bands for wood, plastic and nonferrous metals.
Check Stock

Starrett Advanz TS Carbide Tooth Bandsaw Blade, 111\ x 3/4\ x 3TPI

  • Ideal for cutting wood, composites, plywood, and nonferrous metals.
  • Triple chip grind tooth geometry, Tough ductile back.
  • Smooth surface finish, Superior durability.
Check Stock

TRUEGARD 304 Rust Preventative Solvent, 55 Gallons Drum

  • Provides indoor protection up to 12 months.
  • Used in dip tanks to clean and protect parts.
  • Will not harm workers’ hands under normal circumstances.
  • Compatible with ferrous and nonferrous metals.
Check Stock

Gardner Bender OX-400N Anti-Oxidant Compound for Crimp Connections - 4 oz.

  • Proven resistance to fungus and bacteria.
  • Recommended for ferrous & most nonferrous metals.
Check Stock

Dremel 3.2 mm Tungsten Carbide Cutter Square Tip

  • Use for shaping, smoothing and material removal.
  • Can be used on stainless steel and cast iron.
  • Works on fired ceramics, plastics, hardwoods and other hard materials..
Check Stock

Dremel 9903 Tungsten Carbide Cutter

  • The product is Tungsten Carbide Cutter, 1 by8" Diameter With 1 by8" Shank.
  • Rotary tool accessory for shaping, smoothing and material removal.
  • For use on both hardened steel and stainless steel.
  • For use on cast iron, nonferrous metals and fired ceramics.
  • May also be used on plastics, hardwoods and other hard materials.
Check Stock

Hougen 11742 RotaMagic Metal Cutting Oil 10:1 mix Super Concentrated Cutting Fluid 1 Gallon

  • Use for any and all cutting operations on aluminum.
  • Ozone-friendly and completely free of 1,1,1 trichloroethane.
  • This Cutting Fluid Dissipates heat rapidly and provides closer tolerances.
  • Also highly effective on magnesium and other nonferrous metals.
Check Stock

TRIM MicroSol 455 Low-Foam Semisynthetic Microemulsion Coolant 1-Gallon jug MS455/1

  • Low foaming for today's demanding high-pressure, high-volume applications.
  • Also for machining some aluminum alloys and nonferrous metals.
  • Provides superior corrosion inhibition on cast iron and eliminates hot chip" and clinkering problems".
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance.
  • Requires no special disposal or recycling.
Check Stock

Handy Flux - 7 oz Jar w/Brush General Purpose Jewelry Making Metal Brazing Soldering Flux

  • Handy Flux is a very durable and powerful general purpose flux that protects your parts up to 1600°F (870°C).
  • It is an active fluoride-type flux which is appropriate for all nonferrous metals.
  • It begins to melt and dissolve oxides at 600°F (320°C).
Check Stock

Dremel 9909 Tungsten Carbide Cutter,Silver

  • The product is 1/8" Diameter, Tungsten Carbide Cutter.
  • Shapes, smooths or grinds especially hard materials including: hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics and hard woods..
  • A high-speed cutter made of tungsten carbide, the hardest material next to diamonds..
  • Do not use this cutter for drilling holes or for enlarging holes that are less than twice the diameter of the cutter. The tungsten carbide surface can easily catch the side of a hole and break the bit..
  • For best results, insert the accessory bit all the way into the tool and then back it out slightly before tightening down. This provides plenty of shank for the collet or chuck to hold onto the bit..
Check Stock

TRIM Cutting & Grinding Fluids MS685/1 MicroSol 685 High Lubricity Semisynthetic Metalworking Fluid, 1 gal Jug

  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys.
  • Reduces oil mist and residues often associated with high-lubricity alternatives.
  • Contains no nitrites, triazines, phenols, or sulfurized EP additives.
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals.
  • Forms stable microemulsion in hard water environments.
Check Stock

TRIM Cutting & Grinding Fluids MS685/5 MicroSol 685 High Lubricity Semisynthetic Metalworking Fluid, 5 gal Pail

  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys.
  • Reduces oil mist and residues often associated with high-lubricity alternatives.
  • Contains no nitrites, triazines, phenols, or sulfurized EP additives.
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals.
  • Forms stable microemulsion in hard water environments.
Check Stock

PAGOW 1/2\ Hand Reamer, High Speed Steel H7 6 Straight Groove Reamer, Straight Flutes Hand Milling Cutter Tool

  • Premium Material: The material is low alloy steel with high hardenability and low hardenability. The reamer has the characteristics of high wear resistance, less severe cutting and less deformation..
  • Hand Reamer: Reamer for reaming holes have been drilled after processing (or reaming) on the workpiece, mainly to improve the precision of the hole, reducing its surface roughness, is finishing and semi-finishing tool for the hole..
  • Straight Flute Tool: 6 Flutes & Straight Shank. Allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts..
  • Application Object: Installed in the lathe for cutting of metal tools. Straight flute hand reamers is used in ferrous metals and most nonferrous metals. Designed for accurate reaming in aluminum, cast iron, copper, magnesium alloy, plastic, wood, etc..
  • Application: Good for general purpose applications, offering combination of hardness and toughness for wear resistance. Features just the base substrate without any additional treatment or coatings, suitable for wide ranges of applications..
Check Stock