Categories

Best Extreme Tool Boxes 4inch

KaTur 3/4Inch Round LED Front Rear Side Marker Indicators Light Waterproof Bullet Clearance Marker Light 12V for Car Truck (White)

  • 3/4inch Miniature Round Truck Clearance Marker Light, Used for clearance Lamps, side marker or identification light,Trailer Light etc..
  • Cable length: 22cm(about 8.66 inches), DC12V, 3 LED lens inside of the lamp offer extreme bright light. Low consumption, high energy, long life..
  • Easily mounts into standard 3/4inch hole..
  • Waterproof Lens, sealed Light, universal fit for most car and truck. DOT/SAE Approved!.
  • Location: front / rear / left / right on trucks, heavy trucks, buses etc..
Check Stock

Attachments Compatible with Shop Vac Accessories 1 1/4\ Vacuum Cleaners Accessories Vacuum Extension Wand (8 Packs)

  • 【8 Packs Set】ANBOO 8 pieces vacuum cleaner attachments accessory kit includes 1 1/4" crevice tool, 1 1/4" (1.25") horsehair bristles round brush, 1 1/4" utility nozzle with brush, 1 1/4" upholstery tool, 1 1/4" brush & nozzle combination tool, 2 pack Extend Tubes.
  • 【COMPATIBLE MODEL】This vacuum accessories are compatible with most vaccum (Not All ) 1 1/4 Inch (32mm) & 1 3/8 Inch (35mm) of household vacuums. Our Vacuum Accessories are 1 1/4" inner diameter attachments(The inner diameter is 1-1/4inch(32mm), which means your wand or hose outside diameter of should be smaller than 1-1/4inch(32mm) which is 31mm or 30.5mm..
  • 【Material】Our vacuum attachments is made of high-strength and environmental protection material, durable, high-performance, and very easy to install..
  • 【Wide Usages】Vacuum brush attachments are enough for multi-purpose cleaning at home, office and car interior ,such as : Keyboard, any gaps, shutter, sofa, vent, drawer, car..
  • 【Kindly notice】Please measure the inner diameter of your vacuum hose before purchase.
Check Stock

Dried Flowers Vase Concrete Flower Pot Silicone Mold Succulent Plants Cement Plaster Clay Mold Candle Jar/Pen Container Mould Home Decor

  • Size&Weight: Mold Size(DIAxH):10.7x8.6cm/4.2x3.4inch,Product Finished Size(DIAxH):9x8cm/3.54x3.15in,Mold Weight:170g/6oz.(Please note:we only sell silicone mold).
  • Multi Usages Succulent Plant Vase Planter Cement Molds Concrete Clay Moulds：The mold can be used to as cement/ plaster/ concrete/clay/polyester resin molding tool. Also can be utilized to make soaps/candles/Succulent flower pots and other crafts..
  • Home Garden Decoration Craft Concrete Planter Moulds: Please use Cement or concrete if to make flower pot.
  • You could use cement/ clay/ plaster/ resin if to make desk pen craft..
  • Storage Box Moulds: It can also be used to make a exquisite jewelry storage boxes, candle jar or Pen Container..
  • Material: Made of silicone material, soft, durable, can be reuse and long time to use. Heat-resistant temperature about -50°C-300°C..
Check Stock

WANGFUFU 1/4inch Hex Shank Aluminum Alloy Screwdriver Bits Holder Extension Bar Drill Screw Adapter Change Keychain Portable

  • 【Function--bits hold/quick change 】The Pull-out bushing bits holder can instead of carting around large boxes that bits commonly come in. To make it easy to remove and place back on the quick connect. Can avoid accidental dropping of tools and facilitate high-altitude operations..
  • 【Way of working】This bits holder keychain have a ball bearing detent to hold the bits, they work like a slide or snap lock. Which makes it easier to change the bit with one hand..
  • 【Application For】Universal 1/4inch quick hex shank and 1/4inch hex socket keep different commonly used 1/4 bits handy. Fit most electric drivers, hand-held drivers and bits, like t25 and t20 bits etc..
  • 【Large Load】The powerful ball lock buckle of bits holder can carry bits tools up to 500g in weight. To keep the drill bits not easy to fall..
  • 【Durable】The drill bit socket adapters are made of aluminum alloy, nice durability, lightweight, sturdy, which ensure their longevity..
Check Stock

Jucoan 100 Pack White Paper Gift Boxes with Lids, 4 x 4 x 4 Inch Paper Gift Wrap Box for Wedding, Bridesmaids Proposal, Birthday, Mother's Day, Christmas Gift

  • Includes 100 pack white party favor boxes, made of high quality Kraft paper, very sturdy and durable..
  • The bridesmaid Gift Box measures 4X4X4inch, suitable size for packing small gifts such as candies, candles, bath bombs, soaps, perfumes, makeup, cosmetics, jewelry, and more..
  • White gift boxes are simple and elegant, suitable for decorating with markers,stickers, ribbons and more to make your gifts more special and outstanding..
  • These cute gift boxes with lids are shipped flat to save space and easy to assemble in seconds..
  • Great for gift giving, retail product presentation, giveaways, packaging items, and much more. Ideal for bridesmaids proposals, Christmas gifts, birthday gifts, or wedding gifts.
Check Stock

JOHOUSE Party Favor Box, 50PCS Mini White Paper Laser Cut Gift Candy Box Wedding European Hollow Candy Box for Wedding Bridal Shower Baby Birthday Party

  • PACKAGE INCLUDED - 50 × Creamy White mini favor boxes with White Ribbon.
  • ELEGANT DESIGN - Our European style candy box size is 1.6×3×4inch. Designed by professional artisans, with a vivid hollow-out butterfly flower on the box, precisely keepsake laser cut paper box without any rough angles, paired with a white ribbon, sacred and elegant..
  • PREMIUM QUALITY - Our Hollow-out Sugar Box is made of 200gms cardboard, non-toxic and odorless, eco-friendly and biodegradable, sturdy and durable, easy to set yet hard to fall apart..
  • EASY TO ASSEMBLE - Our Wedding Sweet Boxes are flattened in the package for delivery efficiency. You need to put them together by yourself. But it is very easy to assemble if you follow our instructions. DIY will make the whole process meaningful and enjoyable ..
  • WIDE APPLICATIONS - Our candy boxes are suitable for wedding favors for guests, bridal shower, birthday party, baby shower, anniversary, holiday celebration, etc. Perfect as party favors, photo props, wedding decorations, mooncake boxes and much more.
Check Stock

Jaronx 16PCS Car Detailing Brush Kit, Detail Brushes Car Detailing, Car Detail Cleaning Brush for Wheel, Exterior Interior Auto Detailing Brushes Set (Drill Brush, Wash Mitt, Towels, Polishing Pads)

  • 【16PCS Car Detailing Brushes Set and Car Drill Brush Attachment】Including 5*Car Detail Brush (diffenent sizes), 4*Drill Brushes for Car Detailing (2.5inch, 3.5inch, 4inch, 5inch), 2*Drill Polishing Pads (4inch), 1*Suction Cup (4inch), 1*Wash Mitt, 1*Car Vent Brush, 2*Towel. Best Car Detailing Brush Drill Set for both interior and exterior car cleaning including Engine Bays,Wheels, Emblems,Tire, Leather Seat, Rims, Spokes, Grills, Exhaust Tips, Bumpers, Inner fender, Undercarriage, Air Vents,ect..
  • 【Power Scrubber Drill Brushes】Includes 4 pieces different stiffness and shapes scrubber brushes.2inch Long Black Hard Brush is a perfect tool to reach tight, narrow and hard to reach spaces. 3.5inch Yellow Medium Car Corner Brush is made for car interior corners, carpet, tire, wheel, bumper and also can be applied to kitchen, shower, bathtub,etc. 5Inch White Soft Brush is suitable for car surface, headlights, leather seat, ect. 4Inch Yellow Medium Brush is good to clean broad/open surface areas..
  • 【5 Different Sizes Detailing Brushes & Scratch-free】Meet all you need of detail cleaning.Car Detailing Brush can reach the smallest areas like in between air vents,....
Check Stock

GEARWRENCH 15 Piece Ratcheting Serpentine Belt Tool Set - 3680D

  • Combining the innovation of a GEARWRENCH ratcheting wrench with the requirements of the serpentine belt removal tool to provide the best possible....
  • Complete tool set for removing or installing the serpentine belt on vehicles with a spring loaded belt tensioner pulley.
  • Long bar can hold sockets directly or attach to the ratcheting wrench for maximum access.
  • Includes Drive Tools: Long Bar, Special GearWrench Ratcheting Wrench, and 3/8inch, 1/2inch and 3/4inch Adapters.
  • Includes 6 Point Sockets: 13 millimeter, 14 millimeter, 15 millimeter, 16 millimeter, 17 millimeter, 18 millimeter and 19 millimeter.
Check Stock

DEWALT Bit Holder, Magnetic, 4.75-Inch (DW2055B)

  • ☞High-quality Material: The keychain extension rod is made of aluminum alloy, and the interior is not completely empty. It can be fitted with a short bit or a long bit..
  • ☞Drill Bit Extension Holder Keychain: This handy and flexible 1/4 Inch hex shank screwdriver bits holder is used to extend all kinds of screwdriver bits and make the conversion of screwdriver bits easier..
  • ☞Portable & Compact: Comes with a chain buckle, which can be hung on a belt. You can clip it to your tool bag, keychain tools and gadgets, and no more diging through your pocket. You can also use the keychain post with your favorite carabiner according to your needs..
  • ☞Smooth & Safe to Use: The smooth surface processing and pull-out bushing can avoid accidental dropping of tools and facilitate high-altitude operations.The powerful ball lock buckle can carry tools up to 500g in weight..
  • ☞Extensive Usage: Universal 1/4inch quick hex shank and 1/4inch hex socket fit most electric drivers, hand-held drivers and bits.Suitable for drill, screwdriver, batch head and other to transfer..
Check Stock

UWS EC30201 48-Inch Heavy-Wall Aluminum Truck Side Tool Box with Low Profile, RigidCore Lid

  • SIDE ACCESS. This side mount tool box offers additional storage and organization in your truck bed, securely and conveniently mounting onto the top of the truck bed rail.
  • RIGIDCORE LID. This side mount truck tool box is built for max lid strength with RigidCore technology. The lid is filled with a solid foam to help prevent binding. The low lid also provides a streamlined look, matching low-profile crossbed boxes.
  • EXTRA-THICK ALUMINUM. UWS side tool boxes for pickup trucks are constructed with thicker aluminum compared to most aluminum tool boxes for superior strength. This side bed tool box features a one-piece tub made from welded 0.058-inch aluminum.
  • STAINLESS STEEL HANDLE. This truck side mount tool box is equipped with a lockable, stainless steel handle for dependable security and long-lasting operation in spite of the elements.
  • EASY TO INSTALL. UWS truck side tool boxes are available in several different sizes and styles to accommodate each unique truck and preference.
Check Stock

UWS EC30361 36-Inch Heavy-Wall Aluminum Truck Side Tool Box with Low Profile, RigidCore Lid

  • SIDE ACCESS. This side mount tool box offers additional storage and organization in your truck bed, securely and conveniently mounting onto the top of the truck bed rail.
  • RIGIDCORE LID. This side mount truck tool box is built for max lid strength with RigidCore technology. The lid is filled with a solid foam to help prevent binding. The low lid also provides a streamlined look, matching low-profile crossbed boxes.
  • EXTRA-THICK ALUMINUM. UWS side tool boxes for pickup trucks are constructed with thicker aluminum compared to most aluminum tool boxes for superior strength. This side bed tool box features a one-piece tub made from welded 0.058-inch aluminum.
  • STAINLESS STEEL HANDLE. This truck side mount tool box is equipped with a lockable, stainless steel handle for dependable security and long-lasting operation in spite of the elements.
  • EASY TO INSTALL. UWS truck side tool boxes are available in several different sizes and styles to accommodate each unique truck and preference.
Check Stock

UWS EC30203 48-Inch Matte Black Heavy-Wall Aluminum Truck Side Tool Box with Low Profile RigidCore Lid

  • SIDE ACCESS. This side mount tool box offers additional storage and organization in your truck bed, securely and conveniently mounting onto the top of the truck bed rail.
  • RIGIDCORE LID. This side mount truck tool box is built for max lid strength with RigidCore technology. The lid is filled with a solid foam to help prevent binding. The low lid also provides a streamlined look, matching low-profile crossbed boxes.
  • EXTRA-THICK ALUMINUM. UWS side tool boxes for pickup trucks are constructed with thicker aluminum compared to most aluminum tool boxes for superior strength. This side bed tool box features a one-piece tub made from welded 0.058-inch aluminum.
  • STAINLESS STEEL HANDLE. This matte black truck side mount tool box is equipped with a lockable, stainless steel handle for dependable security and long-lasting operation in spite of the elements.
  • EASY TO INSTALL. UWS truck side tool boxes are available in several different sizes and styles to accommodate each unique truck and preference.
Check Stock

UWS EC30363 36-Inch Matte Black Heavy-Wall Aluminum Truck Side Tool Box with Low Profile RigidCore Lid

  • SIDE ACCESS. This side mount tool box offers additional storage and organization in your truck bed, securely and conveniently mounting onto the top of the truck bed rail.
  • RIGIDCORE LID. This side mount truck tool box is built for max lid strength with RigidCore technology. The lid is filled with a solid foam to help prevent binding. The low lid also provides a streamlined look, matching low-profile crossbed boxes.
  • EXTRA-THICK ALUMINUM. UWS side tool boxes for pickup trucks are constructed with thicker aluminum compared to most aluminum tool boxes for superior strength. This side bed tool box features a one-piece tub made from welded 0.058-inch aluminum.
  • STAINLESS STEEL HANDLE. This matte black truck side mount tool box is equipped with a lockable, stainless steel handle for dependable security and long-lasting operation in spite of the elements.
  • EASY TO INSTALL. UWS truck side tool boxes are available in several different sizes and styles to accommodate each unique truck and preference.
Check Stock