Categories

Best Extruder Lamination Coating Plant

Bowden Extruder V2.1 RNC Nano Coated Gear DDB Universal Geared Extruder for 3D Printer

  • Kit includes: 1pc Universal Geared Extruder w/ RNC Nano Coated Gear, 1pc Screws package, 1pc Installation tools package, 1pc Stepper motor mounting bracket.
  • Upgraded High performance extruder for 3D Printer.
  • Upgrade Highlights: 1. The position of the gears and the accuracy of all screw holes are calibrated. 2. Modified the new buckle, both sides of the V2.1 version of the DDB extruder support filament running thru in and out (it has no specified direction, and you are able to use either side of the material ports).
  • 3. The filament has an independent motion cabin inside the extruder. The new white filament guide inside the extruder is helping the filament running smoothly. 4. The new outer shell design with edge cut on the top of the extruder is reserved for the screw rod of Ender 3 printer. 5. Upgraded shell using new mixed materials.
  • ***Please make sure Gears are Installed and Precisely Aligned before printing, they will perform successfully.
Check Stock

Official 3D Printer Extruder Upgraded Aluminum Drive Feed Extruders Accessories for 3D Printer 1.75mm Filament Works with Creality CR-10 Series Ender 5 Series Ender 3 Series

  • ✔️Durable Material -- High quality aluminum alloy material and sandblast to surface oxidization, ensuring this red extruder is last for long term....
  • ✔️New Upgraded Design -- The upgraded red extruder has removed pneumatic joint so as to increase gear density, preventing the joint fracture....
  • ✔️Improved Performance -- The optimized extruder with metal extrusion and original hot-end kit pushes the filament into printer nozzle, greatly....
  • ✔️Install Easily -- You just remove the old Creality extruder & screw and then install the new red extruder. All the necessary accessories are....
  • ✔️Wide Compatibility -- Red extruder is suitable for Creality 3d printers accessories: Ender-3 series, Ender-5 series, CR-10S, CR-10, CR-10mini,....
Check Stock

Creality 3D Printer Ender 3 S1 Pro High-Temperature Printing Full-Metal Dual-Gear Direct Extruder CR Touch Auto Leveling 32-bit Silent Motherboard Quick Assembly 220*220*270mm

  • WORKS OUT OF THE BOX: 3 steps to set up ANYCUBIC Mega S 3D printer with 8 screws and 3 cables for minutes, not only meets fast assembly needs for....
  • UPGRADED EXTRUDER DESIGN: Titan extruder provides precise extrusion for your 3D printing with solid filament drive and overall mechanical design....
  • RESUME PRINT & SENSOR DETECTION: Mega S 3D Printer can resume printing after power outage or any other unexpected stoppage.One click to resume from....
  • ANYCUBIC ULTRABASE: Patented 3D printer printing platform surface coated with patented microporous coating, with excellent adhesion when printing and....
  • MORE FUNCTION: ①ANYCUBIC MEGA S is an all-in-one frame 3D printer. The rigid metal frame can minimize the shaking to improve the print quality.
Check Stock

5Aplusreprap Upgraded Dual Gear Extruder Single Connector for Creality Ender 3 CR10 / Pro CR-10S 3D Printer 1.75mm Filament (2 x Extra Gears), Right Hand

  • Package Include: Single connector upgraded dual gear extruder right-handed 1 Set - extruder aluminum block DIY kit with 4pcs quality stainless steel gears.
  • Main Material Instruction: Material for extruder: Aluminum Alloy . Material for the gear in extruder kit : Stainless Steel. For filament: 1.75mm.
  • Advantages: This is an upgraded version of CR10 extruder. A newly added extrusion wheel makes the filament feed more stable. The design of the double-concave gear also reduces the embossing of the consumables by the extrusion wheel..
  • Features: The mould steel spring is very rigid, strong in pressure and very durable..
  • Tips: For most Ender/CR Series 3D Printers, please choose the right-handed extruder..
Check Stock

Redrex Ender 3 Extruder Bowden Aluminum Upgraded with 40 Teeth MK8 Drive Gear Kit Compatible with Creality Ender 3V2 /Ender 3 Pro/CR-10 Series and Other Reprap Prusa 3D Printers [Right Hand]

  • 【Application】:This metal extruder is compatible with Creality Ender 3 V2,Ender 3 Pro,Ender 3,CR-10,CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10....
  • 【Direct Drive Extruder】:The upgrade extruder supports direct extrusion.A direct drive extruder improves extrusion and retraction by removing the....
  • 【Filament】：The extruder feeder supports PLA/ABS/Wood/Hips/Flexible/PTEG,with 40 teeth drive gear feeds the 1.75mm filament very smoothy..
  • 【Durable Feeder】:The extruder feeder is made of heavy-duty aluminum alloy material,which is more durable and stable than the plastic one..
Check Stock

ANYCUBIC Mega S Upgrade FDM 3D Printer with Extruder and Suspended Filament Rack + Free Test PLA Filament Works with TPU/PLA/ABS and 8.27 L x8.27 W x8.07 H Print Size

  • WORKS OUT OF THE BOX: 3 steps to set up ANYCUBIC Mega S 3D printer with 8 screws and 3 cables for minutes, not only meets fast assembly needs for....
  • UPGRADED EXTRUDER DESIGN: Titan extruder provides precise extrusion for your 3D printing with solid filament drive and overall mechanical design....
  • RESUME PRINT & SENSOR DETECTION: Mega S 3D Printer can resume printing after power outage or any other unexpected stoppage.One click to resume from....
  • ANYCUBIC ULTRABASE: Patented 3D printer printing platform surface coated with patented microporous coating, with excellent adhesion when printing and....
  • MORE FUNCTION: ①ANYCUBIC MEGA S is an all-in-one frame 3D printer. The rigid metal frame can minimize the shaking to improve the print quality.
Check Stock

Creality Ender 3 S1 3D Printer with Direct Drive Extruder CR Touch Auto Leveling High Precision Double Z-axis Screw Silent Board Printing Size 8.6X8.6X10.6in, Upgrade Ender 3 V2 for Beginners

  • ... the added versatility of an FDM/laser module option upon boot-up. Plus, enjoy the convenience of navigating in your preferred language with support for 9 UI languages. Don't wait, seize the opportunity and get your hands on the Ender-3 S1 now!.
  • DUAL-GEAR DIRECT DRIVE EXTRUDER - Compatible with more filaments, Ender 3 S1 3d printer can print PLA, TPU, PETG, ABS.etc. It is more lighter and features less inertia and more precise positioning. Upgraded dual-gear direct extruder features two chrome steel gears that are engaged at a 1:3.5 gear ratio. With a pushing force of up to 80N, the extruder realizes smooth feeding and discharging of flaments without slipping and works extremely well in printing flexible flaments such as TPU..
  • REMOVABLE SPRING STEEL PRINT SHEET - Different from ender3, ender 3 pro and ender 3 v2, this new-released FDM 3d printer comes with a removable PC spring steel platform. The innovative printing platform is a combination of a PC coating, a spring steel sheet and a magnetic sticker, which sticks to the surface immediately when released. The PC coating brings good adhesion and printed models can easily be removed by bending the print sheet. ....
Check Stock

Creality Upgraded MK-8 Metal Feeder Extruder Frame Aluminum Gray Bowden Extruder Drive for Creality Ender 3/3 Pro/3V2/5/5 Plus, CR-10 Series, CR -10S/20/20 Pro 3D Printer

  • WIDE APPLICATION: The extruder feeder drive is compatible with nearly all models of 3D printers. No need to change stepper motors or other mounting hardware. Suitable for Creality 3D Printers Ender 3/3 Pro, Ender 3 V2, Ender 3 Max, Ender 5/5 Plus/5 Pro, CR-10, CR-10 V2, CR-10 Max, CR-10 S4, CR-10 S5, CR-10S, CR-10 Plus, CR-X, CR 20/20 Pro..
  • ADVANTAGES: Pushing the filament into the printer nozzle with more pressure to improve the performance of the printer. The bolt of our extruder kits is adjustable so that you can adjust the pressure of the extruder gear as needed..
  • EASY TO INSTALL: All you do is unbolt the old original Creality plastic extruder & screw in the new Metal Extruder and ready to start printing. This extruder DIY kit comes with an instruction on how to put it together, which makes it easier to install. Used for 1.75mm filament of 3D printer MK8 Bowden extruder frame..
  • STABLE: All-metal aluminum alloy, DIY aluminum block and you need to be assembled by yourself. Giving a much smoother travel and print quality. Fits a 1.75mm filament..
  • CUSTOMER SUPPORT - If you have any problems with our product, please feel free to contact us. We will respond within 24 hours and offer professional technical support to you..
Check Stock

Bowden Extruder Upgraded V3.0 Dual Drive Gear High-Performance Parts for CR10,Ender 3 Series,Anycubic Mega S, I3 Mega Chiron,Tevo Tornado, Wanhao D9, Anet A8 E10 and Prusa I3 DIY 3D Printer

  • Latest Dual Drive Extruder for Most 3D printers..
  • Update1: SIMAX3D Dual Gear Extruder V3.0 make an independent feeder inside to make filament wiring go inside and out super smoothly..
  • Update2: SIMAX3D Dual Drive Extruder V3.0 change the bowden buckle to pneumatic connector, you’re able to switch only this part after long time use instead of the whole extruder..
  • Update3: This Geared Extruder has an angle for Z-rod which is adapted to those 3D Printer who has an close Z axis installed like Ender 3 old version..
  • Package Include: User Manual*1. SIMAX3D Dual drive extruder set *1.
Check Stock

Project Thin Line Louisiana LA Shape Us United States Waving Wavy American Flag Sticker 4' x 6'

  • Louisiana LA Shape US United States Waving Wavy American Flag Sticker 4" x 6".
  • All stickers are PROUDLY printed in the USA by Project Thin Line..
  • Project Thin Line only uses high quality Eco-Solvent Inks, on a weather resistant vinyl material. We take the extra step of coating ALL of our stickers with a Glossy Clear Lamination to provide additional protection. MOST competitors skip the lamination step to save them money, increase their profit and give their customers an inferior product!.
  • Great for indoor and outdoor use - Vibrant colors and long lasting material..
Check Stock

CREALITY Official Extruder for Ender 3 3D Printer Aluminum Drive Feed Bowden Extruders Upgrade Accessories Kit for Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 Max, Ender-5 Series and CR-10 Series

  • Upgrade Material - High quality aluminum alloy material and sandblast to surface oxidization, ensuring this red extruder is last for long term use..
  • Stable and Durable-Full metal aluminum alloy, DIY kit and need to assemble. Metal material extruder kit is more stable and durable than the original plastic one while working..
  • Easy to Install - All you do is unbolt the old original plastic extruder and screw in the new " Red Metal Extruder ", then it is ready to print. Suitable for 1.75mm filament 3D printer MK8 bowden extruder frame..
  • Wide Compatibility - Red extruder is suitable for Creality 3d printers accessories: Ender 3, Ender 3 V2, Ender 3 Pro, Ender-3 Max, Ender 5 / 5 Plus / 5 Pro, CR-10S, CR-10, CR 10 mini, CR-10 S5, CR-10 S4, CR 20, CR-20 Pro, CR-X..
  • Creality Official Sales: All products are officially sold, genuine and high-quality, please rest assured to buy. All the necessary accessories are included in the package..
Check Stock

Yellow Dog West Virginia WV Shape Us United States Waving Wavy American Flag Sticker 4' x 6'

  • West Virginia WV Shape US United States Waving Wavy American Flag Sticker 4" x 6".
  • All stickers are PROUDLY printed in the USA by Project Thin Line..
  • Project Thin Line only uses high quality Eco-Solvent Inks, on a weather resistant vinyl material. We take the extra step of coating ALL of our stickers with a Glossy Clear Lamination to provide additional protection. MOST competitors skip the lamination step to save them money, increase their profit and give their customers an inferior product!.
  • Great for indoor and outdoor use - Vibrant colors and long lasting material..
Check Stock

eSUN 3D Printer Cleaning Filament 1.75mm Natural 0.1kg for All 1.75mm FDM 3D Printers, 1.75mm Cleaning

  • Excellent heat stability, Wide cleaning temperature range of 150 to 260 celsius..
  • Cleans the extruder's interior by removing accumulated residual filaments..
  • Possesses a certain level of adhesive quality. Will not clog extruder..
  • Clean the 3D printer's extruder before and after printing for better extruder protection..
Check Stock