Categories

Best Extruder Lines

33Pcs Clay Extruder Gun Soft Sugar Syrup Extruder Clay Cake Sculpture Gun Cake Decoration Modeling Tool with 4 Metal Ball Needle Dispensing Tools and 8 Plastic Craft Clay Model Tools

  • ❤ What You Get ----- In this kit, You will get 36Pcs Modeling Tool Kit, Including 1Pcs Clay Extruder Gun with 20Pcs Extrusion Discs, 4Pcs Ball....
  • ❤ With 4Pcs Plastic Modeling Tools ----- Suitable for making dots, smooth lines in clay, sculpture, make paper flowers or embossing on soft paper,....
  • ❤ 8Pcs Plastic Crafts Clay Modeling Tool ----- Clay extruder and ball stylus dotting tool is made of high quality stainless steel, no any harmful....
  • ❤ High Quality Clay Cake Sculpture Gun Tool ----- Color: Green. Material: Aluminium alloy. Size: Length: 6.5 inch / 16.5 cm, Width: 3.9 inch / 10 cm....
  • ❤ Plastic Scraper ----- Use high quality plastic material, wear-resistant, tough, with it can better assist your clay engineering. These are made of....
Check Stock

Comgrow Creality 3D Printer CR-10 V3 New Version and Firmware Upgrade Silent Mainboard Resume Printing 300x300x400mm with Meanwell Power Supply Support DIY Ex

  • 【TITAN DIRECT DRIVE】✔️The direct extruder for Creality CR 10 v3 is right above the hot end with little space in between, which enables the extruder to push the filament directly into the nozzle. Since it minimizes the distance for filament traveling to the hot end, the direct extruder is more helpful and reliable when producing 3D prints with flexible soft filaments like TPU and ABS and can help to avoid filament stringing and oozing during printing..
  • 【DUAL PART COOLING FANS EXTRUDER】✔️Two part cooling fans of Creality large 3D printer are installed on the two sides of the hotend. This can promote to dissipate heat and cool down immediately, thus reducing jamming and poor-spillage..
  • 【UPGRADED SILENT MOTHERBOARD】✔️ CR-10 v3 3D printer has adopted industrial self-developed motherboard backed by TMC2208 ultra silent driver. It demonstrates firm properties as well as reduces noise. 1.1.6 Version firmware, theminal runaway protection and resume printing function are pre-installed in the motherboard..
  • 【ALL METAL FRAME AND TRIANGLE STABLE STRUCTURE】✔️ Creality FDM 3D printer adopts all metal frame and the high quality V-profile structure , forms a firm golden triangle that effectively reduces errors caused by vibrations and make....
Check Stock

Bowden Extruder V2.1 RNC Nano Coated Gear DDB Universal Geared Extruder for 3D Printer

  • Kit includes: 1pc Universal Geared Extruder w/ RNC Nano Coated Gear, 1pc Screws package, 1pc Installation tools package, 1pc Stepper motor mounting bracket.
  • Upgraded High performance extruder for 3D Printer.
  • Upgrade Highlights: 1. The position of the gears and the accuracy of all screw holes are calibrated. 2. Modified the new buckle, both sides of the V2.1 version of the DDB extruder support filament running thru in and out (it has no specified direction, and you are able to use either side of the material ports).
  • 3. The filament has an independent motion cabin inside the extruder. The new white filament guide inside the extruder is helping the filament running smoothly. 4. The new outer shell design with edge cut on the top of the extruder is reserved for the screw rod of Ender 3 printer. 5. Upgraded shell using new mixed materials.
  • ***Please make sure Gears are Installed and Precisely Aligned before printing, they will perform successfully.
Check Stock

Official 3D Printer Extruder Upgraded Aluminum Drive Feed Extruders Accessories for 3D Printer 1.75mm Filament Works with Creality CR-10 Series Ender 5 Series Ender 3 Series

  • ✔️Durable Material -- High quality aluminum alloy material and sandblast to surface oxidization, ensuring this red extruder is last for long term....
  • ✔️New Upgraded Design -- The upgraded red extruder has removed pneumatic joint so as to increase gear density, preventing the joint fracture....
  • ✔️Improved Performance -- The optimized extruder with metal extrusion and original hot-end kit pushes the filament into printer nozzle, greatly....
  • ✔️Install Easily -- You just remove the old Creality extruder & screw and then install the new red extruder. All the necessary accessories are....
  • ✔️Wide Compatibility -- Red extruder is suitable for Creality 3d printers accessories: Ender-3 series, Ender-5 series, CR-10S, CR-10, CR-10mini,....
Check Stock

5Aplusreprap Upgraded Dual Gear Extruder Single Connector for Creality Ender 3 CR10 / Pro CR-10S 3D Printer 1.75mm Filament (2 x Extra Gears), Right Hand

  • Package Include: Single connector upgraded dual gear extruder right-handed 1 Set - extruder aluminum block DIY kit with 4pcs quality stainless steel gears.
  • Main Material Instruction: Material for extruder: Aluminum Alloy . Material for the gear in extruder kit : Stainless Steel. For filament: 1.75mm.
  • Advantages: This is an upgraded version of CR10 extruder. A newly added extrusion wheel makes the filament feed more stable. The design of the double-concave gear also reduces the embossing of the consumables by the extrusion wheel..
  • Features: The mould steel spring is very rigid, strong in pressure and very durable..
  • Tips: For most Ender/CR Series 3D Printers, please choose the right-handed extruder..
Check Stock

Creality Ender 3 S1 Pro 3D Printer with 300℃ High-Temp Nozzle, Sprite All Metal Direct Drive Extruder, PEI Bed and CR Touch Auto Leveling Print Size 8.6×8.6×10.6in, Upgraded Ender 3 S1

  • 300°C HIGH-TEMP PRINTING: Creality new 3D printer Ender-3 S1 Pro Print excellently with diverse filaments, such as PLA, ABS, WOOD, TPU, PETG, PA, etc..
  • “SPRITE” FULL-METAL DUAL-GEAR DIRECT EXTRUDER: the new upgraded direct extruder of the Creality 3D Printer Ender-3 S1 Pro comes with the pushing force up to 80N, the extruder realises smooth feeding and discharging of flaments without slipping and works extremely well in printing flexible flaments like TPU..
  • CR TOUCH AUTO LEVEL SENSOR: CR Touch can completely quickly adjust the nozzle printing height on the hot bed. CR-Touch gets the 16-points auto-levelling program, which can collect more samples than the 9-points of the BLTouch which makes the bed levelling more precise..
  • HIGHER PRINTING PRECISION AND EASY TO USE: Also like Ender 3 S1, Ender3 S1 Pro also has Z-axis dual-screw + Z-axis dual motor design. This can make Ender 3S1 Pro works smoother and more synchronously to lower the possibility of lines and ridges on the sides of your print, thus improving the printing quality. You can also quickly install the printers with 6 steps..
Check Stock

Redrex Ender 3 Extruder Bowden Aluminum Upgraded with 40 Teeth MK8 Drive Gear Kit Compatible with Creality Ender 3V2 /Ender 3 Pro/CR-10 Series and Other Reprap Prusa 3D Printers [Right Hand]

  • 【Application】:This metal extruder is compatible with Creality Ender 3 V2,Ender 3 Pro,Ender 3,CR-10,CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10....
  • 【Direct Drive Extruder】:The upgrade extruder supports direct extrusion.A direct drive extruder improves extrusion and retraction by removing the....
  • 【Filament】：The extruder feeder supports PLA/ABS/Wood/Hips/Flexible/PTEG,with 40 teeth drive gear feeds the 1.75mm filament very smoothy..
  • 【Durable Feeder】:The extruder feeder is made of heavy-duty aluminum alloy material,which is more durable and stable than the plastic one..
Check Stock

Official Creality Ender 3 S1 3D Printer, Upgraded Direct Drive FDM 3D Printers, Quick Assembly, with Auto Leveling Bed, Dual Z-axis Screws, Spring Steel Print Bed, Build Size 220x220x270 mm

  • 【”Sprite” Direct Dual-gear Extruder】Creality Ender-3 S1 3D Printers Use Brand-new self-developed “Sprite” direct dual-gear extruder features two chrome steel gears . The extruder realizes smooth feeding and discharging of filaments without slipping and works extremely well in printing flexible filaments such as TPU. Compared with other direct extruders, the “Sprite” is lighter and features less inertia and more precise positioning..
  • 【CR Touch AUTO-Leveling bed 】Ender 3 S1 3D printer is equipped with CR Touch Sensor, which is indepently developed. The intelligent leveling system can automatically compensate the error height (accuracy ±0.04mm) at different points of the printing bed, which effectively improves the model printing quality and printing success rate, and makes leveling bed more easily more precise..
  • 【Power Loss Recovery and Filament Sensor】Ender-3 S1 features the function of detecting filament runout or breakage/power loss and resume printing after recovery. By accurately recording the printing data at the time of power outage/filament runout or breakage, it helps to avoid the waste of filaments and time caused by accidents..
  • 【High-precision Dual Z-Axis Higher Printing Precision】With a Z-axis dual-screw+Z-axis dua....
Check Stock

CREALITY Ender 3 S1 3D Printer (Upgraded Ender 3 V2) with Sprite Dual-Gear Direct Drive Extruder CR Touch Auto Bed Leveling Silent Board Filament Sensor Dual Z-axis High Precision 8.6x8.6x10.6inch

  • Sprite Direct Dual-Gear Extruder: The "Sprite" direct dual gear extruder developed by Creality 3D has two chrome steel gears that are switched with a gear ratio of 1: 3.5. With a force of up to 80N, the extruder achieves a smooth and even feed and extrusion of filaments without slipping and is ideal for printing flexible filaments such as TPU. With a weight of only 210g, the "Sprite" is lighter than other direct extruders and is characterised by lower inertia and more precise positioning..
  • CR Touch Auto Bed Levelling: The CRTouch 16-point auto levelling technology saves you from the effort of manual levelling. The intelligent levelling system automatically compensates for the print height of various points on the heated bed..
  • Removable PC Spring Steel Platform: The innovative printing platform is a combination of a PC coating, a spring steel plate and a magnetic plate that immediately adheres to the surface when it is detached. The PC coating ensures good adhesion and easy removal of the printed models by bending the surface..
  • Ultra-Quiet 32 Bit Motherboard：The brand new 32-bit silent board runs at low....
Check Stock

Official Creality Ender 3 S1 Pro 3D Printers with 300℃ High Temperature Hotend All Metal Direct Drive Extruder, CR Touch Auto Leveling Bed, Spring Steel PEI Build Plate, Printing Size 220x220x270mm

  • 【"Sprite" Direct Dual-gear Extruder】Creality Ender-3 S1 Pro 3D Printer Equipped Brand-new self-developed "Sprite" direct dual-gear extruder features two chrome steel gears . The extruder realizes smooth feeding and discharging of filaments without slipping and works extremely well in printing flexible filaments such as TPU. Compared with other direct extruders, the "Sprite" is lighter and features less inertia and more precise positioning..
  • 【CR Touch AUTO-Leveling bed 】Ender 3 S1 3D printer is equipped with CR Touch Sensor, which is indepently developed. The intelligent leveling system can automatically compensate the error height (accuracy ±0.04mm) at different points of the printing bed, which effectively improves the model printing quality and printing success rate, and makes leveling bed more easily more precise..
  • 【Filament Breakage Detecting and Power Off Resume Printing】Ender-3 S1 Pro features the function of detecting filament runout or breakage/power loss and resume printing after recovery. By accurately recording the printing data at the time of power outage/filament runout or breakage, it helps to avoid the waste ....
Check Stock

Official Creality Ender 3 S1 Pro 3D Printer with 300℃ High-Temp Nozzle, Sprite All Metal Direct Drive Extruder, PEI Bed and CR Touch Auto Leveling Print Size 8.6×8.6×10.6in, Upgraded Ender 3 S1

  • ...0℃ High-temp Nozzle: This creality 3d printer comes with upgraded brass nozzle which can stand 300℃ high-temp, allow you to choose more kinds of filament like ABS, PETG, PA, PLA, TPU and Wood. Not only for more possibilities of creation but also gives you a smoother printing..
  • “Sprite” All Metal Direct Drive Extruder: The new upgraded direct extruder comes with the pushing force up to 80N, the extruder realizes smooth feeding and discharging of flaments without slipping and works extremely well in printing flexible flaments like TPU..
  • CR-Touch Auto-level Sensor: CRTouch can complete quickly adjust the the nozzle printing height on the hot bed. CR-Touch gets the 16-points auto-leveling program, which can collect more samples than the 9-points of the BLTouch which makes the bed leveling more precise..
  • Higher Printing Precision & Easy to use: Also like Ender 3 S1, Ender3 S1 Pro also has Z-axis dual-screw+Z-axis dual-motor design. This can make Ender 3S1 Pro works smoother and more synchronously to lower the possibility of lines and ridges on the sides of your print, thus improvingthe printing quality. You can also quickly install the printers with 6 steps..
  • Upgraded in All aspects: New 4.3 inch color touch screen installed and it takes an user frien....
Check Stock

Creality Upgraded MK-8 Metal Feeder Extruder Frame Aluminum Gray Bowden Extruder Drive for Creality Ender 3/3 Pro/3V2/5/5 Plus, CR-10 Series, CR -10S/20/20 Pro 3D Printer

  • WIDE APPLICATION: The extruder feeder drive is compatible with nearly all models of 3D printers. No need to change stepper motors or other mounting hardware. Suitable for Creality 3D Printers Ender 3/3 Pro, Ender 3 V2, Ender 3 Max, Ender 5/5 Plus/5 Pro, CR-10, CR-10 V2, CR-10 Max, CR-10 S4, CR-10 S5, CR-10S, CR-10 Plus, CR-X, CR 20/20 Pro..
  • ADVANTAGES: Pushing the filament into the printer nozzle with more pressure to improve the performance of the printer. The bolt of our extruder kits is adjustable so that you can adjust the pressure of the extruder gear as needed..
  • EASY TO INSTALL: All you do is unbolt the old original Creality plastic extruder & screw in the new Metal Extruder and ready to start printing. This extruder DIY kit comes with an instruction on how to put it together, which makes it easier to install. Used for 1.75mm filament of 3D printer MK8 Bowden extruder frame..
  • STABLE: All-metal aluminum alloy, DIY aluminum block and you need to be assembled by yourself. Giving a much smoother travel and print quality. Fits a 1.75mm filament..
  • CUSTOMER SUPPORT - If you have any problems with our product, please feel free to contact us. We will respond within 24 hours and offer professional technical support to you..
Check Stock

Bowden Extruder Upgraded V3.0 Dual Drive Gear High-Performance Parts for CR10,Ender 3 Series,Anycubic Mega S, I3 Mega Chiron,Tevo Tornado, Wanhao D9, Anet A8 E10 and Prusa I3 DIY 3D Printer

  • Latest Dual Drive Extruder for Most 3D printers..
  • Update1: SIMAX3D Dual Gear Extruder V3.0 make an independent feeder inside to make filament wiring go inside and out super smoothly..
  • Update2: SIMAX3D Dual Drive Extruder V3.0 change the bowden buckle to pneumatic connector, you’re able to switch only this part after long time use instead of the whole extruder..
  • Update3: This Geared Extruder has an angle for Z-rod which is adapted to those 3D Printer who has an close Z axis installed like Ender 3 old version..
  • Package Include: User Manual*1. SIMAX3D Dual drive extruder set *1.
Check Stock