Categories

Best Extruder Nozzle Set

eSUN Cleaning Filament 1.75mm, 3D Printer Cleaning Filament, Prevent Nozzles and Extruders Clogging, 100g Spool 3D Printing Filament for 3D Printers, Natural

  • 【Cleaning Filament】Environmentally Friendly and Non-toxic. Keep your 3D printer nozzle in good health, clean between different material and color changes to extend nozzle life..
  • 【Prevent from Clogging】Designed to adhere to any stray material left in the nozzle and remove it along with the cleaning filament. It can clean a variety of 3D printer materials..
  • 【Easy to Use】Wide Cleaning Temperature Range 160°C-300°C. Clean the nozzle and extruder of 3D printer regularly, ensure feed smoothly and constantly without clogging..
  • High Compatibility】Perfect for multiple material including PLA, ABS, PETG etc. 100g(0.22 lbs) 3D printer cleaning filament is vacuumed sealed and comes with desiccant.PLEASE NOTICE THAT CLEANING FILAMENT CANNOT PRINT AS NORMAL FILAMENT..
  • 【When to Use】Before and after printing, change matrial with different melt point, colors and properties for better extruder protection and printing effect.With a certain level of adhesive ability, adhesive accumulated residual filaments and take them out to clean the interior extruder..
Check Stock

Creality Original 3D Printer Extruder Assembled MK8 Hot End Sprinkler Kit for Ender 3 / Ender 3 Pro with Aluminum Heating Block, 1.75mm, 0.4mm Nozzle

  • ENDER 3 EXTRUDER is 100% ORIGINAL CREALITY 3D PRINTINGE PRINTERS PARTS /ACCESSORIES AND WITH HIGH QUALITY, WE JUST CONFIRM IT WORKS WITH CREALITY ENDER 3 3D PRINTERS. OTHERS BRANDS WE DO NOT TEST IT..
  • 5 PIECES 0.4MM 3D PRINTERS NOZZLES AS GIFT..
  • ENDER 3 EXTRUDER HOT END CAN WORK WITH DIFFERENT SIZE MK8 NOZZLE: 0.2MM 0.3MM 0.4MM 0.5MM 0.6MM 0.8MM 1.0MM NOZZLE.
  • MK8 EXTRUDER HOT END KITS,WHITE WIRE WAS TEMPERATURE THERMISTOR, BLACK WIRE WAS HEATING TUBE 24V 40W.
  • TIP OF NOZZLE, ALUMINUM HEATING BLOCK, THROAT PIPE (BUILT-IN TEFLON).
Check Stock

Funrous 3D Printer Nozzle Cleaning Kit, Stainless Steel and Brass Compatible with Mk8 Extruder Nozzles 0.2mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm Cleaning Tool for Cr-10, Ender 3/ V2 Ender3 Pro (37 Pcs)

  • ...1 nozzle wrench, 1 L shaped socket wrench and 2 tweezers, sufficient quantity for you to conveniently replace it in time and achieve quality printing.
  • And the input diameters of nozzles are 0.2 mm, 0.4 mm, 0.5 mm, 0.6 mm, 0.8 mm and 1.0 mm.
  • Wide Compatibility of 3D Printer Extruder Cleaning Kit: MK8 extruder nozzle is suitable for 3D printer Makerbot, CR-10, MK8 and RepRap, Ender 3, Ender 2, Prusa I3, Prusa 3 and other 1.75 mm PLA ABS 3D printers.
  • Reliable Material: the mk8 nozzle set is made of quality hardened steel, brass and stainless steel, strong and reliable, with higher hardness and rust resistance, wear resistance, heat resistance, easy to install and replace, serving you for a long life.
  • Useful Nozzle Wrench 3D Printer Kit: the 0.15mm nozzle cleaning needle is made of stainless steel, flexible and sturdy, easy to bend into the nozzle without breaking, and greatly dealing with the blockage of the nozzle at the hot end of the machine.
  • And the supporting tools make it more convenient for you to install and save your time.
  • High precision: the inner wall of the 3D printing noz....
Check Stock

Twotrees J-Head V6 Hot End Full Kit 1.75mm 12V RepRap 3D Printer Extruder Parts Accessories 0.4mm Nozzle

  • 【1】Applicability & compatibility: compatible with all 1.75mm V6 Makerbot 3D printer.
  • NTC connector with terminal, easy to intall..
  • 【2】Anti-leakage & anti-blocking design: extruder nozzle connect connect with the tube seamless, prevent print material from leaking or blocking ..
  • 【3】Heat resistant & ventilation: 12V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality resistor whose temperature can up to 280°C, 12V high speed fan, radiating quickly ..
  • 【4】Specification: brass material extruder nozzles, output diameter 0.3mm/ 0.4mm/ 0.5mm, input diameter (filament) 1.75mm ..
  • 【5】Package include: all metal V6 hotend 12v / 40w / 1.75mm / 0.4mm extruder full kit (V6 printhead + fan + fan cover + PTFE tube + pipe fitting), 1 pieces brass extrusion nozzles (1×0.4mm ) and a v6 heating block, a 2-part Teflon tube in the nozzle neck made of stainless steel..
Check Stock

Creality Official Upgrade Extruder MK8 Extruder Alloy Block Bowden Extruder 1.75mm Filament for Ender 3 Series Ender 5/5 Plus/Pro CR-10 Series 3D Printer

  • COMPATIBILITY--- All Metal MK-8 Extruder Feeder Drive 1.75mm Filament. It makes loading the filament easier and smoother, with no worries about....
  • UPGRADE METAL EXTRUDER---The upgrade Creality3D silver metal Bowden extruder is an update for the plastic extruder. Upgrade your Creality 3D Printer....
  • WORK BETTER--- the extruder drive has better stronger pressure pushing the filament into the printer nozzle and so will improve the printers'....
  • EASY TO ASSEMBLE--- Our metal extruder kit includes all the necessary screws & parts needed, it can directly replace your old original fragile plastic....
  • OFFICIAL HIGH QUALITY--- Full metal aluminum alloy material makes our extruder kit more stable and durable. And it has stronger pressure pushing the....
Check Stock

People's Choice Beef Jerky - Old Fashioned - Original - Healthy, Sugar Free, Zero Carb, Gluten Free, Keto Friendly, High Protein Meat Snack - Dry Texture - 1 Pound, 16 oz - 1 Bag

  • [Create Home-cooked Snacks]: Enjoy your own protein-filled beef jerky snacks with the 7Penn Ground Beef Jerky Maker Press Kit.
  • This 15-inch meat extruder beef jerky slicer works with ground beef, turkey, venison and more.
  • Make on-the-go meaty strips and snacks for hikes and camping trips.
  • [Easy to Use]: Squeeze the slide-release trigger on the back of the jerky blaster to set and load up to 1.5-pounds (24oz) of mixed ground meat and jerky seasoning into the beef jerky tube.
  • Attach nozzles, then squeeze the trigger to make beef jerky sticks or strips.
  • [Built to Last]: Jerky stick maker deer jerky extruder has a thick, durable plastic meat chamber and a stainless steel trigger mechanism and push rod that withstands repeated use.
  • A whole pound of ground meat can fit in the aluminum 15-inch (38.1cm) tube of this dehydrator jerky tool.
  • [Choose Between 3 Nozzles]: Cone nozzle allows you to create perfectly round 1/2-inch (1.3cm) beef sticks while the flat head nozzle allows you to make 3/4-inch wide by 1/4-inch thick (1.9 x 0.6 cm) strips.
  • Dual flat head nozzle creates 2 meat strips at once.
  • [Easy to Clean]: Place the removable tube and nozzle into the dishwasher to clean.
  • Wipe down the steel push bar and shooter handle with a de-sanitizer rag.
Check Stock

Onyehn 22pcs/Lots A8&A2 3D Printer Part Each 5PCS 0.4mm Extruder Nozzle Print Head+1.75mm Teflon Throat Tube+Heater Blocks Hotend for MK8 Makerbot Reprap

  • Pack of 5 x 3D Printer Extruder Hotend 30mm Length 1.75mm Nozzle Inputting Tube( for MK8 Makerbot Reprap Prusa I3 3D Printer) and 5 x 3D Printer 0.4mm....
  • 0.4mm Extruder Brass Nozzle Print Head: Color - Golden.
  • Compatibility: compatible with all 1.75mm PLA ABS 3D Printer.
  • Quantity:22pcs/lot (5x 3D Printer Nozzle Throat Tube 5x Nozzle Print Heads 5x Heater Blocks Hotend 5x M6 nuts 2x Hex Key Wrenches (for MK8 Makerbot....
Check Stock

Wangdd22 E3D V6 Hot End Full Kit 1.75mm 12V Bowden/RepRap 3D Printer Extruder Parts Accessories 0.4mm Nozzle

  • Applicability & compatibility: compatible with all 1.75mm E3D V6 Makerbot 3D printer.
  • NTC connector with terminal, easy to intall.
  • Anti-leakage & anti-blocking design: extruder nozzle connect connect with the tube seamless, prevent print material from leaking or blocking.
  • Heat resistant & ventilation: 12V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality....
  • Specification: brass material extruder nozzles, output diameter 0.3mm/ 0.4mm/ 0.5mm, input diameter (filament) 1.75mm.
  • Package include: all metal V6 hotend 12v/40w/1.75mm/0.4mm extruder full kit(V6 print head + fan + fan cover + PTFE tube + tube fitting ), 3 Pcs brass....
Check Stock

Official 3D Printer Extruder Upgraded Aluminum Drive Feed Extruders Accessories for 3D Printer 1.75mm Filament Works with Creality CR-10 Series Ender 5 Series Ender 3 Series

  • ✔️Durable Material -- High quality aluminum alloy material and sandblast to surface oxidization, ensuring this red extruder is last for long term....
  • ✔️New Upgraded Design -- The upgraded red extruder has removed pneumatic joint so as to increase gear density, preventing the joint fracture....
  • ✔️Improved Performance -- The optimized extruder with metal extrusion and original hot-end kit pushes the filament into printer nozzle, greatly....
  • ✔️Install Easily -- You just remove the old Creality extruder & screw and then install the new red extruder. All the necessary accessories are....
  • ✔️Wide Compatibility -- Red extruder is suitable for Creality 3d printers accessories: Ender-3 series, Ender-5 series, CR-10S, CR-10, CR-10mini,....
Check Stock

OIIKI 5 PCS HT-NTC 100K Temperature Thermistor 3D Printer Parts Sensor High Temperature +260 Degrees 2 Pins Thermistor for Reprap 3D Printer MK3 Extruder Heater Block

  • Applicability & compatibility: compatible with all 1.75mm E3D V6 Makerbot 3D printer.
  • NTC connector with terminal, easy to intall.
  • Anti-leakage & anti-blocking design: extruder nozzle connect connect with the tube seamless, prevent print material from leaking or blocking.
  • Heat resistant & ventilation: 12V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality....
  • Specification: brass material extruder nozzles, output diameter 0.3mm/ 0.4mm/ 0.5mm, input diameter (filament) 1.75mm.
  • Package include: all metal V6 hotend 12v/40w/1.75mm/0.4mm extruder full kit(V6 print head + fan + fan cover + PTFE tube + tube fitting ), 3 Pcs brass....
Check Stock

FlashForge Creator 3 Pro Independent Dual Extruder 3D Printer

  • 【Independent Dual Extruder Design】The TL-D3 Pro dual-extruder 3D printer has independent dual-nozzle function, which can not only perform....
  • 【Upgrade borosilicate glass bed】：TENLOG's upgraded borosilicate glass bed allows the printed product to adhere better without warping. Even the....
  • 【Print recovery】：The printer can resume printing after a power outage or material supply stops to save time and consumables. You can also print....
  • 【High-quality accessories】：Multi-language interface (7 languages) color touch screen, built-in self-developed mute motherboard tmc2209 driver,....
  • 【Metal scraper】 when using dual-material mode, the metal scraper is afraid that it will wipe the remaining filament on the nozzle, so there is no....
Check Stock

FLASHFORGE Creator Pro 2 3D Printer Independent Dual Extruder, Dual Color Printing, Open 3D Slicer Support with 2 Spools Filament, Work with PLA, ABS, PVA, PETG Filament, Build Volume 200*148*150mm

  • ✨INDEPENDENT DUAL EXTRUDERS - Dual extruder 3D printer Creator Pro 2 realizes Double productivity & Dual filament printing. 4 print modes, Mirror, Duplicate, Dual Filament and Dual-color modes. 2 nozzles work simultaneously and independently to achieve double productivity..
  • ✨HEATING BED - Rapid steady heating prevent model warping much easier to take down models. It supports various types of filament ABS, PLA, PVA, HIPS, creating more realistic models!.
  • ✨REMOVABLE COVER - Creator Pro 2 dual extruder 3d printer lets you adjust chamber temperature at ease. Simply remove its cover when printing PLA filament, as high environment temperature may cause nozzle clog. When print ABS filament, please close the chamber for better quality..
  • ✨RESIDUE SCRAPING DESIGN - After printing, the print head moves to the residue scraping board edge to scrape any residual material on the nozzle. This design of dual extruder 3D printer Creator Pro 2 helps avoid misalignments in the colors, get cleaner dual prints..
  • ✨WIDE RANGE OF APPLICATIONS - Perfect for small workshop's production dem....
Check Stock

3D Printer Nozzles 26PCS Hardened Steel and Brass MK8 Nozzles 0.4MM with Cleaning Tool Kit for Makerbot Creality CR-10/ Ender 3/5 Compatible with All 1.75mm PLA ABS 3D Printer

  • MK8 nozzle Parameter: Input diameter 1.75mm.
  • Wide compatibility :0.4mm nozzlethe input diameter is 1.75mm, m6 thread, suitable Compatible with 3D printer Makerbot Anet A8, MK8 Reprap Prusa I3,....
  • Value for money: package comes with 4 pieces of hardened steel nozzles, 12 pieces brass nozzles, 5 nozzle cleaning needles, 1 Nozzle Spanner , 1 Box....
  • Premium material : MK8 extruder nozzles are made of hardened stainless steel, harder than normal brass nozzles，hardened stainless steel material is....
  • Cleaning needles ,wrench : 5 Flexible stainless steel needles with a of are used to clean 3D printer extruder hot end nozzle clogs and other hard to....
Check Stock