Categories

Best Extrusion Blow Molding

6.56FT Floor Transition Strip Self Adhesive(Brown),Door Threshold Strip,Floor Trim for Wood to Tile Transition, Floor Repair, Gap Coverings

  • ☞【Usage scenarios】 It is suitable for excessive connection between floors and floors or between floors and tiles on the same plane, floor boundaries, and edge sealing..
  • ☞【Adaptability】The surface is scratch-resistant and wear-resistant, easy to clean, and the vacuum cleaner can easily slide over its top.
  • ☞【Easy to use】easy to cut and install, with self-adhesive, it can be pasted after tearing off the glue..
  • ☞【Size】length 200CM/78.7 inches, width 5CM/1.97 inches..
  • ☞ 【Material】pvc soft plastic extrusion molding.
Check Stock

Semi Automatic Blow Molding Machine - NOVO PET Bottle Stretch Blowing Moulding Machines for jar, auto Plastic Cavity Blower Equipment for Small Mineral Water Bottles with Different Liter Gallon

  • High Adjustability: Semi automatic blow molding machine enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus..
  • Strong Force: Semi auto blow moulding machine clamping with high pressure and double crank links to lock the mold..
  • High Safeties: PET blowing machine with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure..
  • Low Cost: Semi auto blow moulding machine is designed with high efficiency, easy operation, easy maintenance, etc, with automatic technological process..
  • Low Rejection: Semi automatic PET Stretch blower is high adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus. Rate less than 0.2 percent.
Check Stock

GEARWRENCH Dead Blow Ball Pein Hammer, 32 oz. - 68-532G

  • The hammer head is equipped with steel balls, which is shock-proof design, no rebound percussion, and more comfortable to use.
  • Double percussion surface design, the hammer surface is flat, the percussion surface is not damaged.
  • The hammer head and the hammer handle are closely connected, and it is not easy to break and deform under heavy blow.
  • The whole adopts high-quality plastic injection molding, wear-resistant and durable, and long service life.
  • Suitable for exterior wall tile, interior floor, furniture decoration.
Check Stock

Orange Aluminum – 90 Degree Angled Extrusion – Heavy Duty Metal Corner Angle – Extruded Edging Trim Hardware - 1/2"x1/2"x.063" (8ft, Mill Finish)

  • CORNER ANGLE: This aluminum angled extrusion can be used for inside and outside corners on a range of installations..
  • 8 FOOT TRIM: Corner trim extrusions are supplied as a 8ft length metal rail – aluminum edging in other lengths is also available..
  • PERFECT FIT: The multi-purpose metal rail has a 1/2″ equal legged 90 degree angle with a reliable, heavy duty 1/16″ wall..
  • MILL FINISH: The metal molding is corrosion resistant and protected from oxidizing, making these extruded accessories durable over time..
  • ORANGE ALUMINUM: Our range of aluminum extrusions includes brackets, rails framing, trims and other premium hardware for both home and professional use..
Check Stock

Auto Part Model Metal Keychain/Key Ring/Holder Set-Turbo Keychain,Six Speed Manual Transmission Shift, Wheel Rim Tyre,Red Spring Shock-absorber Keychain 4PCS

  • These key rings have a strong metal texture and bright color.Crafted from eco-friendly any zinc alloy, no plastic parts, perfect quality..
  • Six speed manual transmission shift keychain: Each gear shifts properly and smoothly.
  • RED SPRING SHOCK ABSORBER KEYCHAIN: Can press on it, bring to you decompression effect..
  • Wheel Rim Tyre keychain :Plating process fashion hub keychain, bright and beautiful..
  • Spinning Turbo keychain: Blow into it and it spins like a turbo spooling ..
  • Spring Shock Absorber Keychain: Simulated car shock absorber, can be smooth extrusion..
Check Stock

18.21 Man Made Hair Paste Pomade with Natural Shine Finish for Men, Sweet Tobacco, 2 Ounce

  • SHAPE, MOLD, AND MANAGE HAIR: Our styling paste is ideal for shaping haircuts at home or by professional - leaving your mane smooth, refined, and frizz-free. It’s great for molding and directing hair while adding moisture..
  • SOFT AND NATURAL: Strong enough for all-day hold, our texture paste will offer a touchable, soft hair texture with a natural finish. Your strands won’t be too shiny or too matte with this paste’s medium shine. Additionally, it will not flake..
  • PERFECT FOR ALL HAIRSTYLES AND TYPES: Our luxurious molding paste is great for wavy, straight, or curly hair, and can be used effortlessly to create and maintain structured or unstructured styles and looks. It works well with dry, thin, or thick hair..
  • EASY TO USE: This hair paste is a fusion of wax and grooming cream that quickly scoops out of the jar. Apply a small amount to damp or dry hair, and for extra volume and control, use with a blow dryer. It is water-soluble and rinses out easily..
  • A MANLY, SEXY AROMA: Featuring our signature sweet tobacco scent, our male styling product leaves a lasting impression. Characterized by hints of saffron, honey, dark vanilla, exotic woods, and powdery musk, its mellow and unique smell is sure to turn heads..
Check Stock

3030 Series Aluminum Profile Connector Set, 20pcs Corner Bracket, 40pcs M6 T Nuts and M6X10 Hex Screw Bolt for 30S 30x30 Aluminum Extrusion Profiles Rail Accessories

  • 3030 Aluminum Extrusion Aluminum Profiles Brackets Set, 20pcs 3030 Corner Brackets Connector, 40pcs M6 T-Nuts and 40pcs M6 Hex Screw Bolt for T Slot Rail 8mm T/V Slot 30mm Series Aluminum Rail Accessories.
  • 3030 series aluminum extrusion connector set widely used for building industrial aluminum frame structures, 3D printers, CNC Routers, CNC laser cutters, Robotics Projects.
  • 40pcs M6 t slot nuts and bolts: 40pcs carbon steel galvanized M6 x 10mm t-slot nuts, 40pcs stainless steel M6 x 10mm hex socket cap screw bolt.
  • Aluminum extrusion t bracket used to connect pieces of 30mm aluminum extrusion at a 90 degree angle suitable for most of metric 30 series aluminum profile extrusion.
  • T-slot aluminum extrusion rail M6x10mm drop in T-Nuts, It can be positioned at any position of the profile instead of sliding in at the end, which is more convenient to use.
Check Stock

DHA Handheld Vacuum Pump Brake Bleeder Kit with Pressure Tester Gauge Adapters Set, Manual Pressure Bleed Brake Clutch System Fluid Vacuum Bleeder Bleeding Tool Kit Car Motorcycle Motorbike One Person

  • One man brake bleeding kit with check valve could be used on brake and clutch wheel cylinder/caliper, master or slave cylinder. to flush old brake fluid and air, and guide the new fluid to fill the whole brake system. Also they can help to pump out the power steering fluid..
  • Automotive abs brake bleeder vacuum pump: Equipped with vacuum gauge, simple operation, convenient readout of pressure Gauge. Pressure range: 0-30inHg, 0-760mmHg. Can test and diagnose a wide variety of brake systems on motorcycle car truck..
  • Brake Fluid bleeder set includes: hand pump with gauge, reservoir jar with 2 lids, 4 transparent hoses, 8 adapters and blow molding case..
  • Carry Case is made by high quality material, durable and rugged, Contained in a blow mold case for easy transportation and storage..
  • We are responsible for every product. If you have any problems with our products or services, please contact us immediately and we will provide you with exceptional responses to your every concern..
Check Stock

3.15 inches Hanging Tealight Holder Glass Globes Terrarium Wedding Candle Holder Candlestick (18 Pcs/Set) (18pcs)

  • PACKAGE INCLUDES: 18pcs hanging glass orbs. Each glass globe measures in 3.15”/ 8cm with 18 x 3.28 Ft jute twine strings. Candles are not included. Kindly reminder: those glass balls are handmade, thus, it maybe a bit size difference..
  • Item Description: Glass Globes With 2 Holes.
  • Size: hanging votive holder: approx. 8CM, Hole: about 4.5CM..
  • Technology: Manual blow molding by handmade, So please allow a slight error in size..
  • Use: Home decoration, wedding, banquet, candlelight dinner wedding, party, hotel, valentine's day, bar, home and other festival decoration.
Check Stock

Portable Folding Table, Multi-Position Adjustable Folding Table, Saving Space, Convenient Storage, wear-Resistant and Easy to use, Suitable for Outdoor/Picnic

  • ★ Made of plastic board, hard/durable/not easy to wear.
  • ★ Adjustable gear at the bottom, height adjustment to meet your different needs.
  • ★ Easy to carry, picnic/camping/family use is a good choice.
  • ★Gear adjustment, three heights can be adjusted, suitable for a variety of environments.
  • ★Thick desktop, integral blow molding, non-slip and durable, easy to clean.
Check Stock

Sleep Eaters

  • COMFORTABLE – Ergonomic, body-fitting shape was developed through testing on many body types to provide optimum comfort for daily use and includes a lumbar support. Padded headrest keeps you in a working position and is easily replaceable..
  • DURABLE – Special molding process bonds the top and bottom permanently together by creating ribs that make the creeper very strong. The impact resistant, blow molded body is made from one piece of high-density polyethylene plastic and is light weight at only 11.5 lbs. The handles located on 3 sides make it easy to hang, carry or move..
  • POP-IN ROLLERS – Six 2 inch ball bearing swivel rollers pop in and out for easy replacement. Urethane wheels are corrosion resistant and are inserted into metal.
  • LOW PROFILE – Unique design provides 7/8 inch floor clearance to clear air hoses, cords, and other obstructions..
  • 300 LBS. CAPACITY – Our plastic creepers feature 300 lbs. capacity with a total length of 38 inches, width of 17.5 inches and height of 4 inches..
  • EASY TO CLEAN – Surface is resistant to solvents, greases and fuels..
Check Stock

RYOBI 18-Volt ONE+ Cordless High Volume Power Inflator (Tool Only) P738 (Bulk Packaged, Non-Retail Packaging)

  • INFLATING AND DEFLATING -You can use this both for inflating and deflating rafts, air mattresses, and more with the convenient nozzle located on the top of the P738.
  • BLOWING ATTACHMENT - You can use an extra attachment (stored on the base of the tool) to blow air around your workplace for dust or drywall cleanup.
  • RUBBER OVERMOLD -A rubber molding is attached to the pistol grip, letting you operate this with full control even in slippery conditions.
  • LOCKING TRIGGER -For longer inflating jobs, you can press in the locking button so the air will flow without you needing to expend any unnecessary energy.
Check Stock

Ryobi HPL52K 6 Amp 16,500 RPM 3 1/4 Corded Hand Planer w/ Kickstand and Dual Dust Ports

  • ADJUSTABLE: Adjust your depth from 0-1/8" in 1/96” increments. This versatility will allow you to tackle a variety of woodworking projects with....
  • GRIPZONE OVERMOLD: A rubber molding over the grip allows precise handling, even in slippery conditions.
  • SAFETY: A lock-off button prevents accidental activation, which saves you from ruining your work causing damage to equipment or yourself.
  • DUAL EXHAUST PORTS: There are ports on either side of the unit. You can choose which side to blow chips out of depending on which side you stand on....
  • REAR MOUNTED KICKSTAND: This plastic piece on the back of the planer will prevent it from scuffing or otherwise marring your work surfaces.
Check Stock